linux-stable/arch/mips/sgi-ip27/ip27-init.c
Paul Gortmaker 26dd3e4ff9 MIPS: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends.  That changed
when we forked out support for the latter into the export.h file.

This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.  In the case of
some code where it is modular, we can extend that to also include
files that are building basic support functionality but not related
to loading or registering the final module; such files also have
no need whatsoever for module.h

The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.

Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace/add as needed.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Build coverage of all the mips defconfigs revealed the module.h
header was masking a couple of implicit include instances, so
we add the appropriate headers there.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Daney <david.daney@cavium.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15131/
[james.hogan@imgtec.com: Preserve sort order where it already exists]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
2017-02-14 09:00:25 +00:00

221 lines
5.3 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
* Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/export.h>
#include <linux/cpumask.h>
#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/time.h>
#include <asm/sn/types.h>
#include <asm/sn/sn0/addrs.h>
#include <asm/sn/sn0/hubni.h>
#include <asm/sn/sn0/hubio.h>
#include <asm/sn/klconfig.h>
#include <asm/sn/ioc3.h>
#include <asm/mipsregs.h>
#include <asm/sn/gda.h>
#include <asm/sn/hub.h>
#include <asm/sn/intr.h>
#include <asm/current.h>
#include <asm/processor.h>
#include <asm/mmu_context.h>
#include <asm/thread_info.h>
#include <asm/sn/launch.h>
#include <asm/sn/sn_private.h>
#include <asm/sn/sn0/ip27.h>
#include <asm/sn/mapped_kernel.h>
#define CPU_NONE (cpuid_t)-1
static DECLARE_BITMAP(hub_init_mask, MAX_COMPACT_NODES);
nasid_t master_nasid = INVALID_NASID;
cnodeid_t nasid_to_compact_node[MAX_NASIDS];
nasid_t compact_to_nasid_node[MAX_COMPACT_NODES];
cnodeid_t cpuid_to_compact_node[MAXCPUS];
EXPORT_SYMBOL(nasid_to_compact_node);
struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
EXPORT_SYMBOL_GPL(sn_cpu_info);
extern void pcibr_setup(cnodeid_t);
extern void xtalk_probe_node(cnodeid_t nid);
static void per_hub_init(cnodeid_t cnode)
{
struct hub_data *hub = hub_data(cnode);
nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
int i;
cpumask_set_cpu(smp_processor_id(), &hub->h_cpus);
if (test_and_set_bit(cnode, hub_init_mask))
return;
/*
* Set CRB timeout at 5ms, (< PI timeout of 10ms)
*/
REMOTE_HUB_S(nasid, IIO_ICTP, 0x800);
REMOTE_HUB_S(nasid, IIO_ICTO, 0xff);
hub_rtc_init(cnode);
xtalk_probe_node(cnode);
#ifdef CONFIG_REPLICATE_EXHANDLERS
/*
* If this is not a headless node initialization,
* copy over the caliased exception handlers.
*/
if (get_compact_nodeid() == cnode) {
extern char except_vec2_generic, except_vec3_generic;
extern void build_tlb_refill_handler(void);
memcpy((void *)(CKSEG0 + 0x100), &except_vec2_generic, 0x80);
memcpy((void *)(CKSEG0 + 0x180), &except_vec3_generic, 0x80);
build_tlb_refill_handler();
memcpy((void *)(CKSEG0 + 0x100), (void *) CKSEG0, 0x80);
memcpy((void *)(CKSEG0 + 0x180), &except_vec3_generic, 0x100);
__flush_cache_all();
}
#endif
/*
* Some interrupts are reserved by hardware or by software convention.
* Mark these as reserved right away so they won't be used accidentally
* later.
*/
for (i = 0; i <= BASE_PCI_IRQ; i++) {
__set_bit(i, hub->irq_alloc_mask);
LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i);
}
__set_bit(IP_PEND0_6_63, hub->irq_alloc_mask);
LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63);
for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) {
__set_bit(i, hub->irq_alloc_mask);
LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i);
}
}
void per_cpu_init(void)
{
int cpu = smp_processor_id();
int slice = LOCAL_HUB_L(PI_CPU_NUM);
cnodeid_t cnode = get_compact_nodeid();
struct hub_data *hub = hub_data(cnode);
struct slice_data *si = hub->slice + slice;
int i;
if (test_and_set_bit(slice, &hub->slice_map))
return;
clear_c0_status(ST0_IM);
per_hub_init(cnode);
for (i = 0; i < LEVELS_PER_SLICE; i++)
si->level_to_irq[i] = -1;
/*
* We use this so we can find the local hub's data as fast as only
* possible.
*/
cpu_data[cpu].data = si;
cpu_time_init();
install_ipi();
/* Install our NMI handler if symmon hasn't installed one. */
install_cpu_nmi_handler(cputoslice(cpu));
set_c0_status(SRB_DEV0 | SRB_DEV1);
}
/*
* get_nasid() returns the physical node id number of the caller.
*/
nasid_t
get_nasid(void)
{
return (nasid_t)((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_NODEID_MASK)
>> NSRI_NODEID_SHFT);
}
/*
* Map the physical node id to a virtual node id (virtual node ids are contiguous).
*/
cnodeid_t get_compact_nodeid(void)
{
return NASID_TO_COMPACT_NODEID(get_nasid());
}
static inline void ioc3_eth_init(void)
{
struct ioc3 *ioc3;
nasid_t nid;
nid = get_nasid();
ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
ioc3->eier = 0;
}
extern void ip27_reboot_setup(void);
void __init plat_mem_setup(void)
{
hubreg_t p, e, n_mode;
nasid_t nid;
ip27_reboot_setup();
/*
* hub_rtc init and cpu clock intr enabled for later calibrate_delay.
*/
nid = get_nasid();
printk("IP27: Running on node %d.\n", nid);
p = LOCAL_HUB_L(PI_CPU_PRESENT_A) & 1;
e = LOCAL_HUB_L(PI_CPU_ENABLE_A) & 1;
printk("Node %d has %s primary CPU%s.\n", nid,
p ? "a" : "no",
e ? ", CPU is running" : "");
p = LOCAL_HUB_L(PI_CPU_PRESENT_B) & 1;
e = LOCAL_HUB_L(PI_CPU_ENABLE_B) & 1;
printk("Node %d has %s secondary CPU%s.\n", nid,
p ? "a" : "no",
e ? ", CPU is running" : "");
/*
* Try to catch kernel missconfigurations and give user an
* indication what option to select.
*/
n_mode = LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_MORENODES_MASK;
printk("Machine is in %c mode.\n", n_mode ? 'N' : 'M');
#ifdef CONFIG_SGI_SN_N_MODE
if (!n_mode)
panic("Kernel compiled for M mode.");
#else
if (n_mode)
panic("Kernel compiled for N mode.");
#endif
ioc3_eth_init();
per_cpu_init();
set_io_port_base(IO_BASE);
}