linux-stable/fs/xfs/xfs_dquot_item_recover.c
Dave Chinner 38c26bfd90 xfs: replace xfs_sb_version checks with feature flag checks
Convert the xfs_sb_version_hasfoo() to checks against
mp->m_features. Checks of the superblock itself during disk
operations (e.g. in the read/write verifiers and the to/from disk
formatters) are not converted - they operate purely on the
superblock state. Everything else should use the mount features.

Large parts of this conversion were done with sed with commands like
this:

for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do
	sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f
done

With manual cleanups for things like "xfs_has_extflgbit" and other
little inconsistencies in naming.

The result is ia lot less typing to check features and an XFS binary
size reduced by a bit over 3kB:

$ size -t fs/xfs/built-in.a
	text	   data	    bss	    dec	    hex	filenam
before	1130866  311352     484 1442702  16038e (TOTALS)
after	1127727  311352     484 1439563  15f74b (TOTALS)

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 10:07:12 -07:00

201 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_quota.h"
#include "xfs_trans.h"
#include "xfs_buf_item.h"
#include "xfs_trans_priv.h"
#include "xfs_qm.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_log_recover.h"
STATIC void
xlog_recover_dquot_ra_pass2(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_mount *mp = log->l_mp;
struct xfs_disk_dquot *recddq;
struct xfs_dq_logformat *dq_f;
uint type;
if (mp->m_qflags == 0)
return;
recddq = item->ri_buf[1].i_addr;
if (recddq == NULL)
return;
if (item->ri_buf[1].i_len < sizeof(struct xfs_disk_dquot))
return;
type = recddq->d_type & XFS_DQTYPE_REC_MASK;
ASSERT(type);
if (log->l_quotaoffs_flag & type)
return;
dq_f = item->ri_buf[0].i_addr;
ASSERT(dq_f);
ASSERT(dq_f->qlf_len == 1);
xlog_buf_readahead(log, dq_f->qlf_blkno,
XFS_FSB_TO_BB(mp, dq_f->qlf_len),
&xfs_dquot_buf_ra_ops);
}
/*
* Recover a dquot record
*/
STATIC int
xlog_recover_dquot_commit_pass2(
struct xlog *log,
struct list_head *buffer_list,
struct xlog_recover_item *item,
xfs_lsn_t current_lsn)
{
struct xfs_mount *mp = log->l_mp;
struct xfs_buf *bp;
struct xfs_disk_dquot *ddq, *recddq;
struct xfs_dq_logformat *dq_f;
xfs_failaddr_t fa;
int error;
uint type;
/*
* Filesystems are required to send in quota flags at mount time.
*/
if (mp->m_qflags == 0)
return 0;
recddq = item->ri_buf[1].i_addr;
if (recddq == NULL) {
xfs_alert(log->l_mp, "NULL dquot in %s.", __func__);
return -EFSCORRUPTED;
}
if (item->ri_buf[1].i_len < sizeof(struct xfs_disk_dquot)) {
xfs_alert(log->l_mp, "dquot too small (%d) in %s.",
item->ri_buf[1].i_len, __func__);
return -EFSCORRUPTED;
}
/*
* This type of quotas was turned off, so ignore this record.
*/
type = recddq->d_type & XFS_DQTYPE_REC_MASK;
ASSERT(type);
if (log->l_quotaoffs_flag & type)
return 0;
/*
* At this point we know that quota was _not_ turned off.
* Since the mount flags are not indicating to us otherwise, this
* must mean that quota is on, and the dquot needs to be replayed.
* Remember that we may not have fully recovered the superblock yet,
* so we can't do the usual trick of looking at the SB quota bits.
*
* The other possibility, of course, is that the quota subsystem was
* removed since the last mount - ENOSYS.
*/
dq_f = item->ri_buf[0].i_addr;
ASSERT(dq_f);
fa = xfs_dquot_verify(mp, recddq, dq_f->qlf_id);
if (fa) {
xfs_alert(mp, "corrupt dquot ID 0x%x in log at %pS",
dq_f->qlf_id, fa);
return -EFSCORRUPTED;
}
ASSERT(dq_f->qlf_len == 1);
/*
* At this point we are assuming that the dquots have been allocated
* and hence the buffer has valid dquots stamped in it. It should,
* therefore, pass verifier validation. If the dquot is bad, then the
* we'll return an error here, so we don't need to specifically check
* the dquot in the buffer after the verifier has run.
*/
error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, dq_f->qlf_blkno,
XFS_FSB_TO_BB(mp, dq_f->qlf_len), 0, &bp,
&xfs_dquot_buf_ops);
if (error)
return error;
ASSERT(bp);
ddq = xfs_buf_offset(bp, dq_f->qlf_boffset);
/*
* If the dquot has an LSN in it, recover the dquot only if it's less
* than the lsn of the transaction we are replaying.
*/
if (xfs_has_crc(mp)) {
struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddq;
xfs_lsn_t lsn = be64_to_cpu(dqb->dd_lsn);
if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) {
goto out_release;
}
}
memcpy(ddq, recddq, item->ri_buf[1].i_len);
if (xfs_has_crc(mp)) {
xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk),
XFS_DQUOT_CRC_OFF);
}
ASSERT(dq_f->qlf_size == 2);
ASSERT(bp->b_mount == mp);
bp->b_flags |= _XBF_LOGRECOVERY;
xfs_buf_delwri_queue(bp, buffer_list);
out_release:
xfs_buf_relse(bp);
return 0;
}
const struct xlog_recover_item_ops xlog_dquot_item_ops = {
.item_type = XFS_LI_DQUOT,
.ra_pass2 = xlog_recover_dquot_ra_pass2,
.commit_pass2 = xlog_recover_dquot_commit_pass2,
};
/*
* Recover QUOTAOFF records. We simply make a note of it in the xlog
* structure, so that we know not to do any dquot item or dquot buffer recovery,
* of that type.
*/
STATIC int
xlog_recover_quotaoff_commit_pass1(
struct xlog *log,
struct xlog_recover_item *item)
{
struct xfs_qoff_logformat *qoff_f = item->ri_buf[0].i_addr;
ASSERT(qoff_f);
/*
* The logitem format's flag tells us if this was user quotaoff,
* group/project quotaoff or both.
*/
if (qoff_f->qf_flags & XFS_UQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQTYPE_USER;
if (qoff_f->qf_flags & XFS_PQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQTYPE_PROJ;
if (qoff_f->qf_flags & XFS_GQUOTA_ACCT)
log->l_quotaoffs_flag |= XFS_DQTYPE_GROUP;
return 0;
}
const struct xlog_recover_item_ops xlog_quotaoff_item_ops = {
.item_type = XFS_LI_QUOTAOFF,
.commit_pass1 = xlog_recover_quotaoff_commit_pass1,
/* nothing to commit in pass2 */
};