linux-stable/drivers/net/dsa/sja1105/Kconfig
Vladimir Oltean dfacc5a23e net: dsa: sja1105: support flow-based redirection via virtual links
Implement tc-flower offloads for redirect, trap and drop using
non-critical virtual links.

Commands which were tested to work are:

  # Send frames received on swp2 with a DA of 42:be:24:9b:76:20 to the
  # CPU and to swp3. This type of key (DA only) when the port's VLAN
  # awareness state is off.
  tc qdisc add dev swp2 clsact
  tc filter add dev swp2 ingress flower skip_sw dst_mac 42:be:24:9b:76:20 \
          action mirred egress redirect dev swp3 \
          action trap

  # Drop frames received on swp2 with a DA of 42:be:24:9b:76:20, a VID
  # of 100 and a PCP of 0.
  tc filter add dev swp2 ingress protocol 802.1Q flower skip_sw \
          dst_mac 42:be:24:9b:76:20 vlan_id 100 vlan_prio 0 action drop

Under the hood, all rules match on DMAC, VID and PCP, but when VLAN
filtering is disabled, those are set internally by the driver to the
port-based defaults. Because we would be put in an awkward situation if
the user were to change the VLAN filtering state while there are active
rules (packets would no longer match on the specified keys), we simply
deny changing vlan_filtering unless the list of flows offloaded via
virtual links is empty. Then the user can re-add new rules.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07 17:31:57 -07:00

45 lines
1.7 KiB
Text

# SPDX-License-Identifier: GPL-2.0-only
config NET_DSA_SJA1105
tristate "NXP SJA1105 Ethernet switch family support"
depends on NET_DSA && SPI
select NET_DSA_TAG_SJA1105
select PACKING
select CRC32
help
This is the driver for the NXP SJA1105 automotive Ethernet switch
family. These are 5-port devices and are managed over an SPI
interface. Probing is handled based on OF bindings and so is the
linkage to PHYLINK. The driver supports the following revisions:
- SJA1105E (Gen. 1, No TT-Ethernet)
- SJA1105T (Gen. 1, TT-Ethernet)
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)
config NET_DSA_SJA1105_PTP
bool "Support for the PTP clock on the NXP SJA1105 Ethernet switch"
depends on NET_DSA_SJA1105
depends on PTP_1588_CLOCK
help
This enables support for timestamping and PTP clock manipulations in
the SJA1105 DSA driver.
config NET_DSA_SJA1105_TAS
bool "Support for the Time-Aware Scheduler on NXP SJA1105"
depends on NET_DSA_SJA1105 && NET_SCH_TAPRIO
depends on NET_SCH_TAPRIO=y || NET_DSA_SJA1105=m
depends on NET_DSA_SJA1105_PTP
help
This enables support for the TTEthernet-based egress scheduling
engine in the SJA1105 DSA driver, which is controlled using a
hardware offload of the tc-tqprio qdisc.
config NET_DSA_SJA1105_VL
bool "Support for Virtual Links on NXP SJA1105"
depends on NET_DSA_SJA1105_TAS
help
This enables support for flow classification using capable devices
(SJA1105T, SJA1105Q, SJA1105S). The following actions are supported:
- redirect, trap, drop
- time-based ingress policing, via the tc-gate action