linux-stable/arch/x86/mm/tlb.c
Dave Hansen e9f4e0a9fe x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
I think the flush_tlb_mm_range() code that tries to tune the
flush sizes based on the CPU needs to get ripped out for
several reasons:

1. It is obviously buggy.  It uses mm->total_vm to judge the
   task's footprint in the TLB.  It should certainly be using
   some measure of RSS, *NOT* ->total_vm since only resident
   memory can populate the TLB.
2. Haswell, and several other CPUs are missing from the
   intel_tlb_flushall_shift_set() function.  Thus, it has been
   demonstrated to bitrot quickly in practice.
3. It is plain wrong in my vm:
	[    0.037444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
	[    0.037444] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
	[    0.037444] tlb_flushall_shift: 6
   Which leads to it to never use invlpg.
4. The assumptions about TLB refill costs are wrong:
	http://lkml.kernel.org/r/1337782555-8088-3-git-send-email-alex.shi@intel.com
    (more on this in later patches)
5. I can not reproduce the original data: https://lkml.org/lkml/2012/5/17/59
   I believe the sample times were too short.  Running the
   benchmark in a loop yields times that vary quite a bit.

Note that this leaves us with a static ceiling of 1 page.  This
is a conservative, dumb setting, and will be revised in a later
patch.

This also removes the code which attempts to predict whether we
are flushing data or instructions.  We expect instruction flushes
to be relatively rare and not worth tuning for explicitly.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154055.ABC88E89@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:50 -07:00

261 lines
6.7 KiB
C

#include <linux/init.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/cpu.h>
#include <asm/tlbflush.h>
#include <asm/mmu_context.h>
#include <asm/cache.h>
#include <asm/apic.h>
#include <asm/uv/uv.h>
#include <linux/debugfs.h>
DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate)
= { &init_mm, 0, };
/*
* Smarter SMP flushing macros.
* c/o Linus Torvalds.
*
* These mean you can really definitely utterly forget about
* writing to user space from interrupts. (Its not allowed anyway).
*
* Optimizations Manfred Spraul <manfred@colorfullife.com>
*
* More scalable flush, from Andi Kleen
*
* Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi
*/
struct flush_tlb_info {
struct mm_struct *flush_mm;
unsigned long flush_start;
unsigned long flush_end;
};
/*
* We cannot call mmdrop() because we are in interrupt context,
* instead update mm->cpu_vm_mask.
*/
void leave_mm(int cpu)
{
struct mm_struct *active_mm = this_cpu_read(cpu_tlbstate.active_mm);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
BUG();
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
load_cr3(swapper_pg_dir);
}
}
EXPORT_SYMBOL_GPL(leave_mm);
/*
* The flush IPI assumes that a thread switch happens in this order:
* [cpu0: the cpu that switches]
* 1) switch_mm() either 1a) or 1b)
* 1a) thread switch to a different mm
* 1a1) set cpu_tlbstate to TLBSTATE_OK
* Now the tlb flush NMI handler flush_tlb_func won't call leave_mm
* if cpu0 was in lazy tlb mode.
* 1a2) update cpu active_mm
* Now cpu0 accepts tlb flushes for the new mm.
* 1a3) cpu_set(cpu, new_mm->cpu_vm_mask);
* Now the other cpus will send tlb flush ipis.
* 1a4) change cr3.
* 1a5) cpu_clear(cpu, old_mm->cpu_vm_mask);
* Stop ipi delivery for the old mm. This is not synchronized with
* the other cpus, but flush_tlb_func ignore flush ipis for the wrong
* mm, and in the worst case we perform a superfluous tlb flush.
* 1b) thread switch without mm change
* cpu active_mm is correct, cpu0 already handles flush ipis.
* 1b1) set cpu_tlbstate to TLBSTATE_OK
* 1b2) test_and_set the cpu bit in cpu_vm_mask.
* Atomically set the bit [other cpus will start sending flush ipis],
* and test the bit.
* 1b3) if the bit was 0: leave_mm was called, flush the tlb.
* 2) switch %%esp, ie current
*
* The interrupt must handle 2 special cases:
* - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
* - the cpu performs speculative tlb reads, i.e. even if the cpu only
* runs in kernel space, the cpu could load tlb entries for user space
* pages.
*
* The good news is that cpu_tlbstate is local to each cpu, no
* write/read ordering problems.
*/
/*
* TLB flush funcation:
* 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
* 2) Leave the mm if we are in the lazy tlb mode.
*/
static void flush_tlb_func(void *info)
{
struct flush_tlb_info *f = info;
inc_irq_stat(irq_tlb_count);
if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
return;
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
if (f->flush_end == TLB_FLUSH_ALL)
local_flush_tlb();
else if (!f->flush_end)
__flush_tlb_single(f->flush_start);
else {
unsigned long addr;
addr = f->flush_start;
while (addr < f->flush_end) {
__flush_tlb_single(addr);
addr += PAGE_SIZE;
}
}
} else
leave_mm(smp_processor_id());
}
void native_flush_tlb_others(const struct cpumask *cpumask,
struct mm_struct *mm, unsigned long start,
unsigned long end)
{
struct flush_tlb_info info;
info.flush_mm = mm;
info.flush_start = start;
info.flush_end = end;
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
if (is_uv_system()) {
unsigned int cpu;
cpu = smp_processor_id();
cpumask = uv_flush_tlb_others(cpumask, mm, start, end, cpu);
if (cpumask)
smp_call_function_many(cpumask, flush_tlb_func,
&info, 1);
return;
}
smp_call_function_many(cpumask, flush_tlb_func, &info, 1);
}
void flush_tlb_current_task(void)
{
struct mm_struct *mm = current->mm;
preempt_disable();
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
preempt_enable();
}
/* in units of pages */
unsigned long tlb_single_page_flush_ceiling = 1;
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
{
int need_flush_others_all = 1;
unsigned long addr;
preempt_disable();
if (current->active_mm != mm)
goto out;
if (!current->mm) {
leave_mm(smp_processor_id());
goto out;
}
if (end == TLB_FLUSH_ALL || vmflag & VM_HUGETLB) {
local_flush_tlb();
goto out;
}
if ((end - start) > tlb_single_page_flush_ceiling * PAGE_SIZE) {
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
} else {
need_flush_others_all = 0;
/* flush range by one by one 'invlpg' */
for (addr = start; addr < end; addr += PAGE_SIZE) {
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
}
out:
if (need_flush_others_all) {
start = 0UL;
end = TLB_FLUSH_ALL;
}
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, start, end);
preempt_enable();
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long start)
{
struct mm_struct *mm = vma->vm_mm;
preempt_disable();
if (current->active_mm == mm) {
if (current->mm)
__flush_tlb_one(start);
else
leave_mm(smp_processor_id());
}
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, start, 0UL);
preempt_enable();
}
static void do_flush_tlb_all(void *info)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
__flush_tlb_all();
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
leave_mm(smp_processor_id());
}
void flush_tlb_all(void)
{
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
on_each_cpu(do_flush_tlb_all, NULL, 1);
}
static void do_kernel_range_flush(void *info)
{
struct flush_tlb_info *f = info;
unsigned long addr;
/* flush range by one by one 'invlpg' */
for (addr = f->flush_start; addr < f->flush_end; addr += PAGE_SIZE)
__flush_tlb_single(addr);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
/* Balance as user space task's flush, a bit conservative */
if (end == TLB_FLUSH_ALL ||
(end - start) > tlb_single_page_flush_ceiling * PAGE_SIZE) {
on_each_cpu(do_flush_tlb_all, NULL, 1);
} else {
struct flush_tlb_info info;
info.flush_start = start;
info.flush_end = end;
on_each_cpu(do_kernel_range_flush, &info, 1);
}
}