mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 08:49:45 +00:00
![Alexander A. Klimov](/assets/img/avatar_default.png)
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
727 lines
19 KiB
C
727 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Texas Instruments ADS7950 SPI ADC driver
|
|
*
|
|
* Copyright 2016 David Lechner <david@lechnology.com>
|
|
*
|
|
* Based on iio/ad7923.c:
|
|
* Copyright 2011 Analog Devices Inc
|
|
* Copyright 2012 CS Systemes d'Information
|
|
*
|
|
* And also on hwmon/ads79xx.c
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
|
|
* Nishanth Menon
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
/*
|
|
* In case of ACPI, we use the 5000 mV as default for the reference pin.
|
|
* Device tree users encode that via the vref-supply regulator.
|
|
*/
|
|
#define TI_ADS7950_VA_MV_ACPI_DEFAULT 5000
|
|
|
|
#define TI_ADS7950_CR_GPIO BIT(14)
|
|
#define TI_ADS7950_CR_MANUAL BIT(12)
|
|
#define TI_ADS7950_CR_WRITE BIT(11)
|
|
#define TI_ADS7950_CR_CHAN(ch) ((ch) << 7)
|
|
#define TI_ADS7950_CR_RANGE_5V BIT(6)
|
|
#define TI_ADS7950_CR_GPIO_DATA BIT(4)
|
|
|
|
#define TI_ADS7950_MAX_CHAN 16
|
|
#define TI_ADS7950_NUM_GPIOS 4
|
|
|
|
#define TI_ADS7950_TIMESTAMP_SIZE (sizeof(int64_t) / sizeof(__be16))
|
|
|
|
/* val = value, dec = left shift, bits = number of bits of the mask */
|
|
#define TI_ADS7950_EXTRACT(val, dec, bits) \
|
|
(((val) >> (dec)) & ((1 << (bits)) - 1))
|
|
|
|
#define TI_ADS7950_MAN_CMD(cmd) (TI_ADS7950_CR_MANUAL | (cmd))
|
|
#define TI_ADS7950_GPIO_CMD(cmd) (TI_ADS7950_CR_GPIO | (cmd))
|
|
|
|
/* Manual mode configuration */
|
|
#define TI_ADS7950_MAN_CMD_SETTINGS(st) \
|
|
(TI_ADS7950_MAN_CMD(TI_ADS7950_CR_WRITE | st->cmd_settings_bitmask))
|
|
/* GPIO mode configuration */
|
|
#define TI_ADS7950_GPIO_CMD_SETTINGS(st) \
|
|
(TI_ADS7950_GPIO_CMD(st->gpio_cmd_settings_bitmask))
|
|
|
|
struct ti_ads7950_state {
|
|
struct spi_device *spi;
|
|
struct spi_transfer ring_xfer;
|
|
struct spi_transfer scan_single_xfer[3];
|
|
struct spi_message ring_msg;
|
|
struct spi_message scan_single_msg;
|
|
|
|
/* Lock to protect the spi xfer buffers */
|
|
struct mutex slock;
|
|
struct gpio_chip chip;
|
|
|
|
struct regulator *reg;
|
|
unsigned int vref_mv;
|
|
|
|
/*
|
|
* Bitmask of lower 7 bits used for configuration
|
|
* These bits only can be written when TI_ADS7950_CR_WRITE
|
|
* is set, otherwise it retains its original state.
|
|
* [0-3] GPIO signal
|
|
* [4] Set following frame to return GPIO signal values
|
|
* [5] Powers down device
|
|
* [6] Sets Vref range1(2.5v) or range2(5v)
|
|
*
|
|
* Bits present on Manual/Auto1/Auto2 commands
|
|
*/
|
|
unsigned int cmd_settings_bitmask;
|
|
|
|
/*
|
|
* Bitmask of GPIO command
|
|
* [0-3] GPIO direction
|
|
* [4-6] Different GPIO alarm mode configurations
|
|
* [7] GPIO 2 as device range input
|
|
* [8] GPIO 3 as device power down input
|
|
* [9] Reset all registers
|
|
* [10-11] N/A
|
|
*/
|
|
unsigned int gpio_cmd_settings_bitmask;
|
|
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
u16 rx_buf[TI_ADS7950_MAX_CHAN + 2 + TI_ADS7950_TIMESTAMP_SIZE]
|
|
____cacheline_aligned;
|
|
u16 tx_buf[TI_ADS7950_MAX_CHAN + 2];
|
|
u16 single_tx;
|
|
u16 single_rx;
|
|
|
|
};
|
|
|
|
struct ti_ads7950_chip_info {
|
|
const struct iio_chan_spec *channels;
|
|
unsigned int num_channels;
|
|
};
|
|
|
|
enum ti_ads7950_id {
|
|
TI_ADS7950,
|
|
TI_ADS7951,
|
|
TI_ADS7952,
|
|
TI_ADS7953,
|
|
TI_ADS7954,
|
|
TI_ADS7955,
|
|
TI_ADS7956,
|
|
TI_ADS7957,
|
|
TI_ADS7958,
|
|
TI_ADS7959,
|
|
TI_ADS7960,
|
|
TI_ADS7961,
|
|
};
|
|
|
|
#define TI_ADS7950_V_CHAN(index, bits) \
|
|
{ \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = index, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.address = index, \
|
|
.datasheet_name = "CH##index", \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = bits, \
|
|
.storagebits = 16, \
|
|
.shift = 12 - (bits), \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
}
|
|
|
|
#define DECLARE_TI_ADS7950_4_CHANNELS(name, bits) \
|
|
const struct iio_chan_spec name ## _channels[] = { \
|
|
TI_ADS7950_V_CHAN(0, bits), \
|
|
TI_ADS7950_V_CHAN(1, bits), \
|
|
TI_ADS7950_V_CHAN(2, bits), \
|
|
TI_ADS7950_V_CHAN(3, bits), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(4), \
|
|
}
|
|
|
|
#define DECLARE_TI_ADS7950_8_CHANNELS(name, bits) \
|
|
const struct iio_chan_spec name ## _channels[] = { \
|
|
TI_ADS7950_V_CHAN(0, bits), \
|
|
TI_ADS7950_V_CHAN(1, bits), \
|
|
TI_ADS7950_V_CHAN(2, bits), \
|
|
TI_ADS7950_V_CHAN(3, bits), \
|
|
TI_ADS7950_V_CHAN(4, bits), \
|
|
TI_ADS7950_V_CHAN(5, bits), \
|
|
TI_ADS7950_V_CHAN(6, bits), \
|
|
TI_ADS7950_V_CHAN(7, bits), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(8), \
|
|
}
|
|
|
|
#define DECLARE_TI_ADS7950_12_CHANNELS(name, bits) \
|
|
const struct iio_chan_spec name ## _channels[] = { \
|
|
TI_ADS7950_V_CHAN(0, bits), \
|
|
TI_ADS7950_V_CHAN(1, bits), \
|
|
TI_ADS7950_V_CHAN(2, bits), \
|
|
TI_ADS7950_V_CHAN(3, bits), \
|
|
TI_ADS7950_V_CHAN(4, bits), \
|
|
TI_ADS7950_V_CHAN(5, bits), \
|
|
TI_ADS7950_V_CHAN(6, bits), \
|
|
TI_ADS7950_V_CHAN(7, bits), \
|
|
TI_ADS7950_V_CHAN(8, bits), \
|
|
TI_ADS7950_V_CHAN(9, bits), \
|
|
TI_ADS7950_V_CHAN(10, bits), \
|
|
TI_ADS7950_V_CHAN(11, bits), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(12), \
|
|
}
|
|
|
|
#define DECLARE_TI_ADS7950_16_CHANNELS(name, bits) \
|
|
const struct iio_chan_spec name ## _channels[] = { \
|
|
TI_ADS7950_V_CHAN(0, bits), \
|
|
TI_ADS7950_V_CHAN(1, bits), \
|
|
TI_ADS7950_V_CHAN(2, bits), \
|
|
TI_ADS7950_V_CHAN(3, bits), \
|
|
TI_ADS7950_V_CHAN(4, bits), \
|
|
TI_ADS7950_V_CHAN(5, bits), \
|
|
TI_ADS7950_V_CHAN(6, bits), \
|
|
TI_ADS7950_V_CHAN(7, bits), \
|
|
TI_ADS7950_V_CHAN(8, bits), \
|
|
TI_ADS7950_V_CHAN(9, bits), \
|
|
TI_ADS7950_V_CHAN(10, bits), \
|
|
TI_ADS7950_V_CHAN(11, bits), \
|
|
TI_ADS7950_V_CHAN(12, bits), \
|
|
TI_ADS7950_V_CHAN(13, bits), \
|
|
TI_ADS7950_V_CHAN(14, bits), \
|
|
TI_ADS7950_V_CHAN(15, bits), \
|
|
IIO_CHAN_SOFT_TIMESTAMP(16), \
|
|
}
|
|
|
|
static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7950, 12);
|
|
static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7951, 12);
|
|
static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7952, 12);
|
|
static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7953, 12);
|
|
static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7954, 10);
|
|
static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7955, 10);
|
|
static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7956, 10);
|
|
static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7957, 10);
|
|
static DECLARE_TI_ADS7950_4_CHANNELS(ti_ads7958, 8);
|
|
static DECLARE_TI_ADS7950_8_CHANNELS(ti_ads7959, 8);
|
|
static DECLARE_TI_ADS7950_12_CHANNELS(ti_ads7960, 8);
|
|
static DECLARE_TI_ADS7950_16_CHANNELS(ti_ads7961, 8);
|
|
|
|
static const struct ti_ads7950_chip_info ti_ads7950_chip_info[] = {
|
|
[TI_ADS7950] = {
|
|
.channels = ti_ads7950_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7950_channels),
|
|
},
|
|
[TI_ADS7951] = {
|
|
.channels = ti_ads7951_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7951_channels),
|
|
},
|
|
[TI_ADS7952] = {
|
|
.channels = ti_ads7952_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7952_channels),
|
|
},
|
|
[TI_ADS7953] = {
|
|
.channels = ti_ads7953_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7953_channels),
|
|
},
|
|
[TI_ADS7954] = {
|
|
.channels = ti_ads7954_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7954_channels),
|
|
},
|
|
[TI_ADS7955] = {
|
|
.channels = ti_ads7955_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7955_channels),
|
|
},
|
|
[TI_ADS7956] = {
|
|
.channels = ti_ads7956_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7956_channels),
|
|
},
|
|
[TI_ADS7957] = {
|
|
.channels = ti_ads7957_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7957_channels),
|
|
},
|
|
[TI_ADS7958] = {
|
|
.channels = ti_ads7958_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7958_channels),
|
|
},
|
|
[TI_ADS7959] = {
|
|
.channels = ti_ads7959_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7959_channels),
|
|
},
|
|
[TI_ADS7960] = {
|
|
.channels = ti_ads7960_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7960_channels),
|
|
},
|
|
[TI_ADS7961] = {
|
|
.channels = ti_ads7961_channels,
|
|
.num_channels = ARRAY_SIZE(ti_ads7961_channels),
|
|
},
|
|
};
|
|
|
|
/*
|
|
* ti_ads7950_update_scan_mode() setup the spi transfer buffer for the new
|
|
* scan mask
|
|
*/
|
|
static int ti_ads7950_update_scan_mode(struct iio_dev *indio_dev,
|
|
const unsigned long *active_scan_mask)
|
|
{
|
|
struct ti_ads7950_state *st = iio_priv(indio_dev);
|
|
int i, cmd, len;
|
|
|
|
len = 0;
|
|
for_each_set_bit(i, active_scan_mask, indio_dev->num_channels) {
|
|
cmd = TI_ADS7950_MAN_CMD(TI_ADS7950_CR_CHAN(i));
|
|
st->tx_buf[len++] = cmd;
|
|
}
|
|
|
|
/* Data for the 1st channel is not returned until the 3rd transfer */
|
|
st->tx_buf[len++] = 0;
|
|
st->tx_buf[len++] = 0;
|
|
|
|
st->ring_xfer.len = len * 2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct ti_ads7950_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&st->slock);
|
|
ret = spi_sync(st->spi, &st->ring_msg);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &st->rx_buf[2],
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
out:
|
|
mutex_unlock(&st->slock);
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
|
|
{
|
|
struct ti_ads7950_state *st = iio_priv(indio_dev);
|
|
int ret, cmd;
|
|
|
|
mutex_lock(&st->slock);
|
|
cmd = TI_ADS7950_MAN_CMD(TI_ADS7950_CR_CHAN(ch));
|
|
st->single_tx = cmd;
|
|
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = st->single_rx;
|
|
|
|
out:
|
|
mutex_unlock(&st->slock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_ads7950_get_range(struct ti_ads7950_state *st)
|
|
{
|
|
int vref;
|
|
|
|
if (st->vref_mv) {
|
|
vref = st->vref_mv;
|
|
} else {
|
|
vref = regulator_get_voltage(st->reg);
|
|
if (vref < 0)
|
|
return vref;
|
|
|
|
vref /= 1000;
|
|
}
|
|
|
|
if (st->cmd_settings_bitmask & TI_ADS7950_CR_RANGE_5V)
|
|
vref *= 2;
|
|
|
|
return vref;
|
|
}
|
|
|
|
static int ti_ads7950_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long m)
|
|
{
|
|
struct ti_ads7950_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = ti_ads7950_scan_direct(indio_dev, chan->address);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (chan->address != TI_ADS7950_EXTRACT(ret, 12, 4))
|
|
return -EIO;
|
|
|
|
*val = TI_ADS7950_EXTRACT(ret, chan->scan_type.shift,
|
|
chan->scan_type.realbits);
|
|
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
ret = ti_ads7950_get_range(st);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret;
|
|
*val2 = (1 << chan->scan_type.realbits) - 1;
|
|
|
|
return IIO_VAL_FRACTIONAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info ti_ads7950_info = {
|
|
.read_raw = &ti_ads7950_read_raw,
|
|
.update_scan_mode = ti_ads7950_update_scan_mode,
|
|
};
|
|
|
|
static void ti_ads7950_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct ti_ads7950_state *st = gpiochip_get_data(chip);
|
|
|
|
mutex_lock(&st->slock);
|
|
|
|
if (value)
|
|
st->cmd_settings_bitmask |= BIT(offset);
|
|
else
|
|
st->cmd_settings_bitmask &= ~BIT(offset);
|
|
|
|
st->single_tx = TI_ADS7950_MAN_CMD_SETTINGS(st);
|
|
spi_sync(st->spi, &st->scan_single_msg);
|
|
|
|
mutex_unlock(&st->slock);
|
|
}
|
|
|
|
static int ti_ads7950_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct ti_ads7950_state *st = gpiochip_get_data(chip);
|
|
int ret;
|
|
|
|
mutex_lock(&st->slock);
|
|
|
|
/* If set as output, return the output */
|
|
if (st->gpio_cmd_settings_bitmask & BIT(offset)) {
|
|
ret = st->cmd_settings_bitmask & BIT(offset);
|
|
goto out;
|
|
}
|
|
|
|
/* GPIO data bit sets SDO bits 12-15 to GPIO input */
|
|
st->cmd_settings_bitmask |= TI_ADS7950_CR_GPIO_DATA;
|
|
st->single_tx = TI_ADS7950_MAN_CMD_SETTINGS(st);
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ((st->single_rx >> 12) & BIT(offset)) ? 1 : 0;
|
|
|
|
/* Revert back to original settings */
|
|
st->cmd_settings_bitmask &= ~TI_ADS7950_CR_GPIO_DATA;
|
|
st->single_tx = TI_ADS7950_MAN_CMD_SETTINGS(st);
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
if (ret)
|
|
goto out;
|
|
|
|
out:
|
|
mutex_unlock(&st->slock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_ads7950_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
struct ti_ads7950_state *st = gpiochip_get_data(chip);
|
|
|
|
/* Bitmask is inverted from GPIO framework 0=input/1=output */
|
|
return !(st->gpio_cmd_settings_bitmask & BIT(offset));
|
|
}
|
|
|
|
static int _ti_ads7950_set_direction(struct gpio_chip *chip, int offset,
|
|
int input)
|
|
{
|
|
struct ti_ads7950_state *st = gpiochip_get_data(chip);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&st->slock);
|
|
|
|
/* Only change direction if needed */
|
|
if (input && (st->gpio_cmd_settings_bitmask & BIT(offset)))
|
|
st->gpio_cmd_settings_bitmask &= ~BIT(offset);
|
|
else if (!input && !(st->gpio_cmd_settings_bitmask & BIT(offset)))
|
|
st->gpio_cmd_settings_bitmask |= BIT(offset);
|
|
else
|
|
goto out;
|
|
|
|
st->single_tx = TI_ADS7950_GPIO_CMD_SETTINGS(st);
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
|
|
out:
|
|
mutex_unlock(&st->slock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_ads7950_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
return _ti_ads7950_set_direction(chip, offset, 1);
|
|
}
|
|
|
|
static int ti_ads7950_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
ti_ads7950_set(chip, offset, value);
|
|
|
|
return _ti_ads7950_set_direction(chip, offset, 0);
|
|
}
|
|
|
|
static int ti_ads7950_init_hw(struct ti_ads7950_state *st)
|
|
{
|
|
int ret = 0;
|
|
|
|
mutex_lock(&st->slock);
|
|
|
|
/* Settings for Manual/Auto1/Auto2 commands */
|
|
/* Default to 5v ref */
|
|
st->cmd_settings_bitmask = TI_ADS7950_CR_RANGE_5V;
|
|
st->single_tx = TI_ADS7950_MAN_CMD_SETTINGS(st);
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Settings for GPIO command */
|
|
st->gpio_cmd_settings_bitmask = 0x0;
|
|
st->single_tx = TI_ADS7950_GPIO_CMD_SETTINGS(st);
|
|
ret = spi_sync(st->spi, &st->scan_single_msg);
|
|
|
|
out:
|
|
mutex_unlock(&st->slock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_ads7950_probe(struct spi_device *spi)
|
|
{
|
|
struct ti_ads7950_state *st;
|
|
struct iio_dev *indio_dev;
|
|
const struct ti_ads7950_chip_info *info;
|
|
int ret;
|
|
|
|
spi->bits_per_word = 16;
|
|
spi->mode |= SPI_CS_WORD;
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "Error in spi setup\n");
|
|
return ret;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st->spi = spi;
|
|
|
|
info = &ti_ads7950_chip_info[spi_get_device_id(spi)->driver_data];
|
|
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = info->channels;
|
|
indio_dev->num_channels = info->num_channels;
|
|
indio_dev->info = &ti_ads7950_info;
|
|
|
|
/* build spi ring message */
|
|
spi_message_init(&st->ring_msg);
|
|
|
|
st->ring_xfer.tx_buf = &st->tx_buf[0];
|
|
st->ring_xfer.rx_buf = &st->rx_buf[0];
|
|
/* len will be set later */
|
|
st->ring_xfer.cs_change = true;
|
|
|
|
spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
|
|
|
|
/*
|
|
* Setup default message. The sample is read at the end of the first
|
|
* transfer, then it takes one full cycle to convert the sample and one
|
|
* more cycle to send the value. The conversion process is driven by
|
|
* the SPI clock, which is why we have 3 transfers. The middle one is
|
|
* just dummy data sent while the chip is converting the sample that
|
|
* was read at the end of the first transfer.
|
|
*/
|
|
|
|
st->scan_single_xfer[0].tx_buf = &st->single_tx;
|
|
st->scan_single_xfer[0].len = 2;
|
|
st->scan_single_xfer[0].cs_change = 1;
|
|
st->scan_single_xfer[1].tx_buf = &st->single_tx;
|
|
st->scan_single_xfer[1].len = 2;
|
|
st->scan_single_xfer[1].cs_change = 1;
|
|
st->scan_single_xfer[2].rx_buf = &st->single_rx;
|
|
st->scan_single_xfer[2].len = 2;
|
|
|
|
spi_message_init_with_transfers(&st->scan_single_msg,
|
|
st->scan_single_xfer, 3);
|
|
|
|
/* Use hard coded value for reference voltage in ACPI case */
|
|
if (ACPI_COMPANION(&spi->dev))
|
|
st->vref_mv = TI_ADS7950_VA_MV_ACPI_DEFAULT;
|
|
|
|
mutex_init(&st->slock);
|
|
|
|
st->reg = devm_regulator_get(&spi->dev, "vref");
|
|
if (IS_ERR(st->reg)) {
|
|
dev_err(&spi->dev, "Failed to get regulator \"vref\"\n");
|
|
ret = PTR_ERR(st->reg);
|
|
goto error_destroy_mutex;
|
|
}
|
|
|
|
ret = regulator_enable(st->reg);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
|
|
goto error_destroy_mutex;
|
|
}
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, NULL,
|
|
&ti_ads7950_trigger_handler, NULL);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to setup triggered buffer\n");
|
|
goto error_disable_reg;
|
|
}
|
|
|
|
ret = ti_ads7950_init_hw(st);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to init adc chip\n");
|
|
goto error_cleanup_ring;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to register iio device\n");
|
|
goto error_cleanup_ring;
|
|
}
|
|
|
|
/* Add GPIO chip */
|
|
st->chip.label = dev_name(&st->spi->dev);
|
|
st->chip.parent = &st->spi->dev;
|
|
st->chip.owner = THIS_MODULE;
|
|
st->chip.base = -1;
|
|
st->chip.ngpio = TI_ADS7950_NUM_GPIOS;
|
|
st->chip.get_direction = ti_ads7950_get_direction;
|
|
st->chip.direction_input = ti_ads7950_direction_input;
|
|
st->chip.direction_output = ti_ads7950_direction_output;
|
|
st->chip.get = ti_ads7950_get;
|
|
st->chip.set = ti_ads7950_set;
|
|
|
|
ret = gpiochip_add_data(&st->chip, st);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Failed to init GPIOs\n");
|
|
goto error_iio_device;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_iio_device:
|
|
iio_device_unregister(indio_dev);
|
|
error_cleanup_ring:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_disable_reg:
|
|
regulator_disable(st->reg);
|
|
error_destroy_mutex:
|
|
mutex_destroy(&st->slock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ti_ads7950_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct ti_ads7950_state *st = iio_priv(indio_dev);
|
|
|
|
gpiochip_remove(&st->chip);
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
regulator_disable(st->reg);
|
|
mutex_destroy(&st->slock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id ti_ads7950_id[] = {
|
|
{ "ads7950", TI_ADS7950 },
|
|
{ "ads7951", TI_ADS7951 },
|
|
{ "ads7952", TI_ADS7952 },
|
|
{ "ads7953", TI_ADS7953 },
|
|
{ "ads7954", TI_ADS7954 },
|
|
{ "ads7955", TI_ADS7955 },
|
|
{ "ads7956", TI_ADS7956 },
|
|
{ "ads7957", TI_ADS7957 },
|
|
{ "ads7958", TI_ADS7958 },
|
|
{ "ads7959", TI_ADS7959 },
|
|
{ "ads7960", TI_ADS7960 },
|
|
{ "ads7961", TI_ADS7961 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ti_ads7950_id);
|
|
|
|
static const struct of_device_id ads7950_of_table[] = {
|
|
{ .compatible = "ti,ads7950", .data = &ti_ads7950_chip_info[TI_ADS7950] },
|
|
{ .compatible = "ti,ads7951", .data = &ti_ads7950_chip_info[TI_ADS7951] },
|
|
{ .compatible = "ti,ads7952", .data = &ti_ads7950_chip_info[TI_ADS7952] },
|
|
{ .compatible = "ti,ads7953", .data = &ti_ads7950_chip_info[TI_ADS7953] },
|
|
{ .compatible = "ti,ads7954", .data = &ti_ads7950_chip_info[TI_ADS7954] },
|
|
{ .compatible = "ti,ads7955", .data = &ti_ads7950_chip_info[TI_ADS7955] },
|
|
{ .compatible = "ti,ads7956", .data = &ti_ads7950_chip_info[TI_ADS7956] },
|
|
{ .compatible = "ti,ads7957", .data = &ti_ads7950_chip_info[TI_ADS7957] },
|
|
{ .compatible = "ti,ads7958", .data = &ti_ads7950_chip_info[TI_ADS7958] },
|
|
{ .compatible = "ti,ads7959", .data = &ti_ads7950_chip_info[TI_ADS7959] },
|
|
{ .compatible = "ti,ads7960", .data = &ti_ads7950_chip_info[TI_ADS7960] },
|
|
{ .compatible = "ti,ads7961", .data = &ti_ads7950_chip_info[TI_ADS7961] },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ads7950_of_table);
|
|
|
|
static struct spi_driver ti_ads7950_driver = {
|
|
.driver = {
|
|
.name = "ads7950",
|
|
.of_match_table = ads7950_of_table,
|
|
},
|
|
.probe = ti_ads7950_probe,
|
|
.remove = ti_ads7950_remove,
|
|
.id_table = ti_ads7950_id,
|
|
};
|
|
module_spi_driver(ti_ads7950_driver);
|
|
|
|
MODULE_AUTHOR("David Lechner <david@lechnology.com>");
|
|
MODULE_DESCRIPTION("TI TI_ADS7950 ADC");
|
|
MODULE_LICENSE("GPL v2");
|