mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-22 00:40:03 +00:00
![Alexander A. Klimov](/assets/img/avatar_default.png)
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
373 lines
7.8 KiB
C
373 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* All Sensors DLH series low voltage digital pressure sensors
|
|
*
|
|
* Copyright (c) 2019 AVL DiTEST GmbH
|
|
* Tomislav Denis <tomislav.denis@avl.com>
|
|
*
|
|
* Datasheet: https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
/* Commands */
|
|
#define DLH_START_SINGLE 0xAA
|
|
|
|
/* Status bits */
|
|
#define DLH_STATUS_OK 0x40
|
|
|
|
/* DLH data format */
|
|
#define DLH_NUM_READ_BYTES 7
|
|
#define DLH_NUM_DATA_BYTES 3
|
|
#define DLH_NUM_PR_BITS 24
|
|
#define DLH_NUM_TEMP_BITS 24
|
|
|
|
/* DLH timings */
|
|
#define DLH_SINGLE_DUT_MS 5
|
|
|
|
enum dhl_ids {
|
|
dlhl60d,
|
|
dlhl60g,
|
|
};
|
|
|
|
struct dlh_info {
|
|
u8 osdig; /* digital offset factor */
|
|
unsigned int fss; /* full scale span (inch H2O) */
|
|
};
|
|
|
|
struct dlh_state {
|
|
struct i2c_client *client;
|
|
struct dlh_info info;
|
|
bool use_interrupt;
|
|
struct completion completion;
|
|
u8 rx_buf[DLH_NUM_READ_BYTES] ____cacheline_aligned;
|
|
};
|
|
|
|
static struct dlh_info dlh_info_tbl[] = {
|
|
[dlhl60d] = {
|
|
.osdig = 2,
|
|
.fss = 120,
|
|
},
|
|
[dlhl60g] = {
|
|
.osdig = 10,
|
|
.fss = 60,
|
|
},
|
|
};
|
|
|
|
|
|
static int dlh_cmd_start_single(struct dlh_state *st)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte(st->client, DLH_START_SINGLE);
|
|
if (ret)
|
|
dev_err(&st->client->dev,
|
|
"%s: I2C write byte failed\n", __func__);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dlh_cmd_read_data(struct dlh_state *st)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_master_recv(st->client, st->rx_buf, DLH_NUM_READ_BYTES);
|
|
if (ret < 0) {
|
|
dev_err(&st->client->dev,
|
|
"%s: I2C read block failed\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
if (st->rx_buf[0] != DLH_STATUS_OK) {
|
|
dev_err(&st->client->dev,
|
|
"%s: invalid status 0x%02x\n", __func__, st->rx_buf[0]);
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dlh_start_capture_and_read(struct dlh_state *st)
|
|
{
|
|
int ret;
|
|
|
|
if (st->use_interrupt)
|
|
reinit_completion(&st->completion);
|
|
|
|
ret = dlh_cmd_start_single(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (st->use_interrupt) {
|
|
ret = wait_for_completion_timeout(&st->completion,
|
|
msecs_to_jiffies(DLH_SINGLE_DUT_MS));
|
|
if (!ret) {
|
|
dev_err(&st->client->dev,
|
|
"%s: conversion timed out\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} else {
|
|
mdelay(DLH_SINGLE_DUT_MS);
|
|
}
|
|
|
|
return dlh_cmd_read_data(st);
|
|
}
|
|
|
|
static int dlh_read_direct(struct dlh_state *st,
|
|
unsigned int *pressure, unsigned int *temperature)
|
|
{
|
|
int ret;
|
|
|
|
ret = dlh_start_capture_and_read(st);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
|
|
*temperature = get_unaligned_be32(&st->rx_buf[3]) &
|
|
GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dlh_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *channel, int *value,
|
|
int *value2, long mask)
|
|
{
|
|
struct dlh_state *st = iio_priv(indio_dev);
|
|
unsigned int pressure, temperature;
|
|
int ret;
|
|
s64 tmp;
|
|
s32 rem;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = iio_device_claim_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dlh_read_direct(st, &pressure, &temperature);
|
|
iio_device_release_direct_mode(indio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (channel->type) {
|
|
case IIO_PRESSURE:
|
|
*value = pressure;
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_TEMP:
|
|
*value = temperature;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (channel->type) {
|
|
case IIO_PRESSURE:
|
|
tmp = div_s64(125LL * st->info.fss * 24909 * 100,
|
|
1 << DLH_NUM_PR_BITS);
|
|
tmp = div_s64_rem(tmp, 1000000000LL, &rem);
|
|
*value = tmp;
|
|
*value2 = rem;
|
|
return IIO_VAL_INT_PLUS_NANO;
|
|
|
|
case IIO_TEMP:
|
|
*value = 125 * 1000;
|
|
*value2 = DLH_NUM_TEMP_BITS;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
switch (channel->type) {
|
|
case IIO_PRESSURE:
|
|
*value = -125 * st->info.fss * 24909;
|
|
*value2 = 100 * st->info.osdig * 100000;
|
|
return IIO_VAL_FRACTIONAL;
|
|
|
|
case IIO_TEMP:
|
|
*value = -40 * 1000;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info dlh_info = {
|
|
.read_raw = dlh_read_raw,
|
|
};
|
|
|
|
static const struct iio_chan_spec dlh_channels[] = {
|
|
{
|
|
.type = IIO_PRESSURE,
|
|
.indexed = 1,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type =
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.scan_index = 0,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = DLH_NUM_PR_BITS,
|
|
.storagebits = 32,
|
|
.shift = 8,
|
|
.endianness = IIO_BE,
|
|
},
|
|
}, {
|
|
.type = IIO_TEMP,
|
|
.indexed = 1,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type =
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_OFFSET),
|
|
.scan_index = 1,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = DLH_NUM_TEMP_BITS,
|
|
.storagebits = 32,
|
|
.shift = 8,
|
|
.endianness = IIO_BE,
|
|
},
|
|
}
|
|
};
|
|
|
|
static irqreturn_t dlh_trigger_handler(int irq, void *private)
|
|
{
|
|
struct iio_poll_func *pf = private;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct dlh_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
unsigned int chn, i = 0;
|
|
__be32 tmp_buf[2];
|
|
|
|
ret = dlh_start_capture_and_read(st);
|
|
if (ret)
|
|
goto out;
|
|
|
|
for_each_set_bit(chn, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
memcpy(tmp_buf + i,
|
|
&st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
|
|
DLH_NUM_DATA_BYTES);
|
|
i++;
|
|
}
|
|
|
|
iio_push_to_buffers(indio_dev, tmp_buf);
|
|
|
|
out:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t dlh_interrupt(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct dlh_state *st = iio_priv(indio_dev);
|
|
|
|
complete(&st->completion);
|
|
|
|
return IRQ_HANDLED;
|
|
};
|
|
|
|
static int dlh_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct dlh_state *st;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) {
|
|
dev_err(&client->dev,
|
|
"adapter doesn't support required i2c functionality\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
|
|
if (!indio_dev) {
|
|
dev_err(&client->dev, "failed to allocate iio device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
st = iio_priv(indio_dev);
|
|
st->info = dlh_info_tbl[id->driver_data];
|
|
st->client = client;
|
|
st->use_interrupt = false;
|
|
|
|
indio_dev->name = id->name;
|
|
indio_dev->info = &dlh_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = dlh_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(dlh_channels);
|
|
|
|
if (client->irq > 0) {
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
dlh_interrupt, NULL,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
id->name, indio_dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to allocate threaded irq");
|
|
return ret;
|
|
}
|
|
|
|
st->use_interrupt = true;
|
|
init_completion(&st->completion);
|
|
}
|
|
|
|
ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
|
|
NULL, &dlh_trigger_handler, NULL);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to setup iio buffer\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_iio_device_register(&client->dev, indio_dev);
|
|
if (ret)
|
|
dev_err(&client->dev, "failed to register iio device\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id dlh_of_match[] = {
|
|
{ .compatible = "asc,dlhl60d" },
|
|
{ .compatible = "asc,dlhl60g" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dlh_of_match);
|
|
|
|
static const struct i2c_device_id dlh_id[] = {
|
|
{ "dlhl60d", dlhl60d },
|
|
{ "dlhl60g", dlhl60g },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, dlh_id);
|
|
|
|
static struct i2c_driver dlh_driver = {
|
|
.driver = {
|
|
.name = "dlhl60d",
|
|
.of_match_table = dlh_of_match,
|
|
},
|
|
.probe = dlh_probe,
|
|
.id_table = dlh_id,
|
|
};
|
|
module_i2c_driver(dlh_driver);
|
|
|
|
MODULE_AUTHOR("Tomislav Denis <tomislav.denis@avl.com>");
|
|
MODULE_DESCRIPTION("Driver for All Sensors DLH series pressure sensors");
|
|
MODULE_LICENSE("GPL v2");
|