mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Pekka Enberg](/assets/img/avatar_default.png)
This patch removes malloc(), free(), and printf() wrappers from the aic7xxx SCSI driver. I didn't use pr_debug for printf because of some 'clever' uses of printf don't compile with the pr_debug. I didn't fix the overeager uses of GFP_ATOMIC either because I wanted to keep this patch as simple as possible. [jejb:fixed up checkpatch errors and fixed up missed conversion] Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
324 lines
9.6 KiB
C
324 lines
9.6 KiB
C
/*
|
|
* Interface for the 93C66/56/46/26/06 serial eeprom parts.
|
|
*
|
|
* Copyright (c) 1995, 1996 Daniel M. Eischen
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL").
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#19 $
|
|
*/
|
|
|
|
/*
|
|
* The instruction set of the 93C66/56/46/26/06 chips are as follows:
|
|
*
|
|
* Start OP *
|
|
* Function Bit Code Address** Data Description
|
|
* -------------------------------------------------------------------
|
|
* READ 1 10 A5 - A0 Reads data stored in memory,
|
|
* starting at specified address
|
|
* EWEN 1 00 11XXXX Write enable must precede
|
|
* all programming modes
|
|
* ERASE 1 11 A5 - A0 Erase register A5A4A3A2A1A0
|
|
* WRITE 1 01 A5 - A0 D15 - D0 Writes register
|
|
* ERAL 1 00 10XXXX Erase all registers
|
|
* WRAL 1 00 01XXXX D15 - D0 Writes to all registers
|
|
* EWDS 1 00 00XXXX Disables all programming
|
|
* instructions
|
|
* *Note: A value of X for address is a don't care condition.
|
|
* **Note: There are 8 address bits for the 93C56/66 chips unlike
|
|
* the 93C46/26/06 chips which have 6 address bits.
|
|
*
|
|
* The 93C46 has a four wire interface: clock, chip select, data in, and
|
|
* data out. In order to perform one of the above functions, you need
|
|
* to enable the chip select for a clock period (typically a minimum of
|
|
* 1 usec, with the clock high and low a minimum of 750 and 250 nsec
|
|
* respectively). While the chip select remains high, you can clock in
|
|
* the instructions (above) starting with the start bit, followed by the
|
|
* OP code, Address, and Data (if needed). For the READ instruction, the
|
|
* requested 16-bit register contents is read from the data out line but
|
|
* is preceded by an initial zero (leading 0, followed by 16-bits, MSB
|
|
* first). The clock cycling from low to high initiates the next data
|
|
* bit to be sent from the chip.
|
|
*/
|
|
|
|
#ifdef __linux__
|
|
#include "aic7xxx_osm.h"
|
|
#include "aic7xxx_inline.h"
|
|
#include "aic7xxx_93cx6.h"
|
|
#else
|
|
#include <dev/aic7xxx/aic7xxx_osm.h>
|
|
#include <dev/aic7xxx/aic7xxx_inline.h>
|
|
#include <dev/aic7xxx/aic7xxx_93cx6.h>
|
|
#endif
|
|
|
|
/*
|
|
* Right now, we only have to read the SEEPROM. But we make it easier to
|
|
* add other 93Cx6 functions.
|
|
*/
|
|
struct seeprom_cmd {
|
|
uint8_t len;
|
|
uint8_t bits[11];
|
|
};
|
|
|
|
/* Short opcodes for the c46 */
|
|
static const struct seeprom_cmd seeprom_ewen = {9, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
|
|
static const struct seeprom_cmd seeprom_ewds = {9, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
|
|
|
|
/* Long opcodes for the C56/C66 */
|
|
static const struct seeprom_cmd seeprom_long_ewen = {11, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
|
|
static const struct seeprom_cmd seeprom_long_ewds = {11, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
|
|
|
|
/* Common opcodes */
|
|
static const struct seeprom_cmd seeprom_write = {3, {1, 0, 1}};
|
|
static const struct seeprom_cmd seeprom_read = {3, {1, 1, 0}};
|
|
|
|
/*
|
|
* Wait for the SEERDY to go high; about 800 ns.
|
|
*/
|
|
#define CLOCK_PULSE(sd, rdy) \
|
|
while ((SEEPROM_STATUS_INB(sd) & rdy) == 0) { \
|
|
; /* Do nothing */ \
|
|
} \
|
|
(void)SEEPROM_INB(sd); /* Clear clock */
|
|
|
|
/*
|
|
* Send a START condition and the given command
|
|
*/
|
|
static void
|
|
send_seeprom_cmd(struct seeprom_descriptor *sd, const struct seeprom_cmd *cmd)
|
|
{
|
|
uint8_t temp;
|
|
int i = 0;
|
|
|
|
/* Send chip select for one clock cycle. */
|
|
temp = sd->sd_MS ^ sd->sd_CS;
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
|
|
for (i = 0; i < cmd->len; i++) {
|
|
if (cmd->bits[i] != 0)
|
|
temp ^= sd->sd_DO;
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
if (cmd->bits[i] != 0)
|
|
temp ^= sd->sd_DO;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Clear CS put the chip in the reset state, where it can wait for new commands.
|
|
*/
|
|
static void
|
|
reset_seeprom(struct seeprom_descriptor *sd)
|
|
{
|
|
uint8_t temp;
|
|
|
|
temp = sd->sd_MS;
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
}
|
|
|
|
/*
|
|
* Read the serial EEPROM and returns 1 if successful and 0 if
|
|
* not successful.
|
|
*/
|
|
int
|
|
ahc_read_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
|
|
u_int start_addr, u_int count)
|
|
{
|
|
int i = 0;
|
|
u_int k = 0;
|
|
uint16_t v;
|
|
uint8_t temp;
|
|
|
|
/*
|
|
* Read the requested registers of the seeprom. The loop
|
|
* will range from 0 to count-1.
|
|
*/
|
|
for (k = start_addr; k < count + start_addr; k++) {
|
|
/*
|
|
* Now we're ready to send the read command followed by the
|
|
* address of the 16-bit register we want to read.
|
|
*/
|
|
send_seeprom_cmd(sd, &seeprom_read);
|
|
|
|
/* Send the 6 or 8 bit address (MSB first, LSB last). */
|
|
temp = sd->sd_MS ^ sd->sd_CS;
|
|
for (i = (sd->sd_chip - 1); i >= 0; i--) {
|
|
if ((k & (1 << i)) != 0)
|
|
temp ^= sd->sd_DO;
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
if ((k & (1 << i)) != 0)
|
|
temp ^= sd->sd_DO;
|
|
}
|
|
|
|
/*
|
|
* Now read the 16 bit register. An initial 0 precedes the
|
|
* register contents which begins with bit 15 (MSB) and ends
|
|
* with bit 0 (LSB). The initial 0 will be shifted off the
|
|
* top of our word as we let the loop run from 0 to 16.
|
|
*/
|
|
v = 0;
|
|
for (i = 16; i >= 0; i--) {
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
v <<= 1;
|
|
if (SEEPROM_DATA_INB(sd) & sd->sd_DI)
|
|
v |= 1;
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
}
|
|
|
|
buf[k - start_addr] = v;
|
|
|
|
/* Reset the chip select for the next command cycle. */
|
|
reset_seeprom(sd);
|
|
}
|
|
#ifdef AHC_DUMP_EEPROM
|
|
printk("\nSerial EEPROM:\n\t");
|
|
for (k = 0; k < count; k = k + 1) {
|
|
if (((k % 8) == 0) && (k != 0)) {
|
|
printk(KERN_CONT "\n\t");
|
|
}
|
|
printk(KERN_CONT " 0x%x", buf[k]);
|
|
}
|
|
printk(KERN_CONT "\n");
|
|
#endif
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Write the serial EEPROM and return 1 if successful and 0 if
|
|
* not successful.
|
|
*/
|
|
int
|
|
ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
|
|
u_int start_addr, u_int count)
|
|
{
|
|
const struct seeprom_cmd *ewen, *ewds;
|
|
uint16_t v;
|
|
uint8_t temp;
|
|
int i, k;
|
|
|
|
/* Place the chip into write-enable mode */
|
|
if (sd->sd_chip == C46) {
|
|
ewen = &seeprom_ewen;
|
|
ewds = &seeprom_ewds;
|
|
} else if (sd->sd_chip == C56_66) {
|
|
ewen = &seeprom_long_ewen;
|
|
ewds = &seeprom_long_ewds;
|
|
} else {
|
|
printk("ahc_write_seeprom: unsupported seeprom type %d\n",
|
|
sd->sd_chip);
|
|
return (0);
|
|
}
|
|
|
|
send_seeprom_cmd(sd, ewen);
|
|
reset_seeprom(sd);
|
|
|
|
/* Write all requested data out to the seeprom. */
|
|
temp = sd->sd_MS ^ sd->sd_CS;
|
|
for (k = start_addr; k < count + start_addr; k++) {
|
|
/* Send the write command */
|
|
send_seeprom_cmd(sd, &seeprom_write);
|
|
|
|
/* Send the 6 or 8 bit address (MSB first). */
|
|
for (i = (sd->sd_chip - 1); i >= 0; i--) {
|
|
if ((k & (1 << i)) != 0)
|
|
temp ^= sd->sd_DO;
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
if ((k & (1 << i)) != 0)
|
|
temp ^= sd->sd_DO;
|
|
}
|
|
|
|
/* Write the 16 bit value, MSB first */
|
|
v = buf[k - start_addr];
|
|
for (i = 15; i >= 0; i--) {
|
|
if ((v & (1 << i)) != 0)
|
|
temp ^= sd->sd_DO;
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
if ((v & (1 << i)) != 0)
|
|
temp ^= sd->sd_DO;
|
|
}
|
|
|
|
/* Wait for the chip to complete the write */
|
|
temp = sd->sd_MS;
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
temp = sd->sd_MS ^ sd->sd_CS;
|
|
do {
|
|
SEEPROM_OUTB(sd, temp);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
SEEPROM_OUTB(sd, temp ^ sd->sd_CK);
|
|
CLOCK_PULSE(sd, sd->sd_RDY);
|
|
} while ((SEEPROM_DATA_INB(sd) & sd->sd_DI) == 0);
|
|
|
|
reset_seeprom(sd);
|
|
}
|
|
|
|
/* Put the chip back into write-protect mode */
|
|
send_seeprom_cmd(sd, ewds);
|
|
reset_seeprom(sd);
|
|
|
|
return (1);
|
|
}
|
|
|
|
int
|
|
ahc_verify_cksum(struct seeprom_config *sc)
|
|
{
|
|
int i;
|
|
int maxaddr;
|
|
uint32_t checksum;
|
|
uint16_t *scarray;
|
|
|
|
maxaddr = (sizeof(*sc)/2) - 1;
|
|
checksum = 0;
|
|
scarray = (uint16_t *)sc;
|
|
|
|
for (i = 0; i < maxaddr; i++)
|
|
checksum = checksum + scarray[i];
|
|
if (checksum == 0
|
|
|| (checksum & 0xFFFF) != sc->checksum) {
|
|
return (0);
|
|
} else {
|
|
return(1);
|
|
}
|
|
}
|