linux-stable/include/net/netdev_queues.h
Heiner Kallweit cb18e5595d net: add macro netif_subqueue_completed_wake
Add netif_subqueue_completed_wake, complementing the subqueue versions
netif_subqueue_try_stop and netif_subqueue_maybe_stop.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-18 12:59:01 +02:00

173 lines
5.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _LINUX_NET_QUEUES_H
#define _LINUX_NET_QUEUES_H
#include <linux/netdevice.h>
/**
* DOC: Lockless queue stopping / waking helpers.
*
* The netif_txq_maybe_stop() and __netif_txq_completed_wake()
* macros are designed to safely implement stopping
* and waking netdev queues without full lock protection.
*
* We assume that there can be no concurrent stop attempts and no concurrent
* wake attempts. The try-stop should happen from the xmit handler,
* while wake up should be triggered from NAPI poll context.
* The two may run concurrently (single producer, single consumer).
*
* The try-stop side is expected to run from the xmit handler and therefore
* it does not reschedule Tx (netif_tx_start_queue() instead of
* netif_tx_wake_queue()). Uses of the ``stop`` macros outside of the xmit
* handler may lead to xmit queue being enabled but not run.
* The waking side does not have similar context restrictions.
*
* The macros guarantee that rings will not remain stopped if there's
* space available, but they do *not* prevent false wake ups when
* the ring is full! Drivers should check for ring full at the start
* for the xmit handler.
*
* All descriptor ring indexes (and other relevant shared state) must
* be updated before invoking the macros.
*/
#define netif_txq_try_stop(txq, get_desc, start_thrs) \
({ \
int _res; \
\
netif_tx_stop_queue(txq); \
/* Producer index and stop bit must be visible \
* to consumer before we recheck. \
* Pairs with a barrier in __netif_txq_completed_wake(). \
*/ \
smp_mb__after_atomic(); \
\
/* We need to check again in a case another \
* CPU has just made room available. \
*/ \
_res = 0; \
if (unlikely(get_desc >= start_thrs)) { \
netif_tx_start_queue(txq); \
_res = -1; \
} \
_res; \
}) \
/**
* netif_txq_maybe_stop() - locklessly stop a Tx queue, if needed
* @txq: struct netdev_queue to stop/start
* @get_desc: get current number of free descriptors (see requirements below!)
* @stop_thrs: minimal number of available descriptors for queue to be left
* enabled
* @start_thrs: minimal number of descriptors to re-enable the queue, can be
* equal to @stop_thrs or higher to avoid frequent waking
*
* All arguments may be evaluated multiple times, beware of side effects.
* @get_desc must be a formula or a function call, it must always
* return up-to-date information when evaluated!
* Expected to be used from ndo_start_xmit, see the comment on top of the file.
*
* Returns:
* 0 if the queue was stopped
* 1 if the queue was left enabled
* -1 if the queue was re-enabled (raced with waking)
*/
#define netif_txq_maybe_stop(txq, get_desc, stop_thrs, start_thrs) \
({ \
int _res; \
\
_res = 1; \
if (unlikely(get_desc < stop_thrs)) \
_res = netif_txq_try_stop(txq, get_desc, start_thrs); \
_res; \
}) \
/* Variant of netdev_tx_completed_queue() which guarantees smp_mb() if
* @bytes != 0, regardless of kernel config.
*/
static inline void
netdev_txq_completed_mb(struct netdev_queue *dev_queue,
unsigned int pkts, unsigned int bytes)
{
if (IS_ENABLED(CONFIG_BQL))
netdev_tx_completed_queue(dev_queue, pkts, bytes);
else if (bytes)
smp_mb();
}
/**
* __netif_txq_completed_wake() - locklessly wake a Tx queue, if needed
* @txq: struct netdev_queue to stop/start
* @pkts: number of packets completed
* @bytes: number of bytes completed
* @get_desc: get current number of free descriptors (see requirements below!)
* @start_thrs: minimal number of descriptors to re-enable the queue
* @down_cond: down condition, predicate indicating that the queue should
* not be woken up even if descriptors are available
*
* All arguments may be evaluated multiple times.
* @get_desc must be a formula or a function call, it must always
* return up-to-date information when evaluated!
* Reports completed pkts/bytes to BQL.
*
* Returns:
* 0 if the queue was woken up
* 1 if the queue was already enabled (or disabled but @down_cond is true)
* -1 if the queue was left unchanged (@start_thrs not reached)
*/
#define __netif_txq_completed_wake(txq, pkts, bytes, \
get_desc, start_thrs, down_cond) \
({ \
int _res; \
\
/* Report to BQL and piggy back on its barrier. \
* Barrier makes sure that anybody stopping the queue \
* after this point sees the new consumer index. \
* Pairs with barrier in netif_txq_try_stop(). \
*/ \
netdev_txq_completed_mb(txq, pkts, bytes); \
\
_res = -1; \
if (pkts && likely(get_desc > start_thrs)) { \
_res = 1; \
if (unlikely(netif_tx_queue_stopped(txq)) && \
!(down_cond)) { \
netif_tx_wake_queue(txq); \
_res = 0; \
} \
} \
_res; \
})
#define netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs) \
__netif_txq_completed_wake(txq, pkts, bytes, get_desc, start_thrs, false)
/* subqueue variants follow */
#define netif_subqueue_try_stop(dev, idx, get_desc, start_thrs) \
({ \
struct netdev_queue *txq; \
\
txq = netdev_get_tx_queue(dev, idx); \
netif_txq_try_stop(txq, get_desc, start_thrs); \
})
#define netif_subqueue_maybe_stop(dev, idx, get_desc, stop_thrs, start_thrs) \
({ \
struct netdev_queue *txq; \
\
txq = netdev_get_tx_queue(dev, idx); \
netif_txq_maybe_stop(txq, get_desc, stop_thrs, start_thrs); \
})
#define netif_subqueue_completed_wake(dev, idx, pkts, bytes, \
get_desc, start_thrs) \
({ \
struct netdev_queue *txq; \
\
txq = netdev_get_tx_queue(dev, idx); \
netif_txq_completed_wake(txq, pkts, bytes, \
get_desc, start_thrs); \
})
#endif