linux-stable/include/linux/swiotlb.h
Petr Tesarik ec274aff21 swiotlb: Omit total_used and used_hiwater if !CONFIG_DEBUG_FS
The tracking of used_hiwater adds an atomic operation to the hot
path. This is acceptable only when debugging the kernel. To make
sure that the fields can never be used by mistake, do not even
include them in struct io_tlb_mem if CONFIG_DEBUG_FS is not set.

The build fails after doing that. To fix it, it is necessary to
remove all code specific to debugfs and instead provide a stub
implementation of swiotlb_create_debugfs_files(). As a bonus, this
change allows to remove one __maybe_unused attribute.

Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2023-04-20 14:51:41 +02:00

194 lines
5.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SWIOTLB_H
#define __LINUX_SWIOTLB_H
#include <linux/device.h>
#include <linux/dma-direction.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/limits.h>
#include <linux/spinlock.h>
struct device;
struct page;
struct scatterlist;
#define SWIOTLB_VERBOSE (1 << 0) /* verbose initialization */
#define SWIOTLB_FORCE (1 << 1) /* force bounce buffering */
#define SWIOTLB_ANY (1 << 2) /* allow any memory for the buffer */
/*
* Maximum allowable number of contiguous slabs to map,
* must be a power of 2. What is the appropriate value ?
* The complexity of {map,unmap}_single is linearly dependent on this value.
*/
#define IO_TLB_SEGSIZE 128
/*
* log of the size of each IO TLB slab. The number of slabs is command line
* controllable.
*/
#define IO_TLB_SHIFT 11
#define IO_TLB_SIZE (1 << IO_TLB_SHIFT)
/* default to 64MB */
#define IO_TLB_DEFAULT_SIZE (64UL<<20)
unsigned long swiotlb_size_or_default(void);
void __init swiotlb_init_remap(bool addressing_limit, unsigned int flags,
int (*remap)(void *tlb, unsigned long nslabs));
int swiotlb_init_late(size_t size, gfp_t gfp_mask,
int (*remap)(void *tlb, unsigned long nslabs));
extern void __init swiotlb_update_mem_attributes(void);
phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, phys_addr_t phys,
size_t mapping_size, size_t alloc_size,
unsigned int alloc_aligned_mask, enum dma_data_direction dir,
unsigned long attrs);
extern void swiotlb_tbl_unmap_single(struct device *hwdev,
phys_addr_t tlb_addr,
size_t mapping_size,
enum dma_data_direction dir,
unsigned long attrs);
void swiotlb_sync_single_for_device(struct device *dev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir);
void swiotlb_sync_single_for_cpu(struct device *dev, phys_addr_t tlb_addr,
size_t size, enum dma_data_direction dir);
dma_addr_t swiotlb_map(struct device *dev, phys_addr_t phys,
size_t size, enum dma_data_direction dir, unsigned long attrs);
#ifdef CONFIG_SWIOTLB
/**
* struct io_tlb_mem - IO TLB Memory Pool Descriptor
*
* @start: The start address of the swiotlb memory pool. Used to do a quick
* range check to see if the memory was in fact allocated by this
* API.
* @end: The end address of the swiotlb memory pool. Used to do a quick
* range check to see if the memory was in fact allocated by this
* API.
* @vaddr: The vaddr of the swiotlb memory pool. The swiotlb memory pool
* may be remapped in the memory encrypted case and store virtual
* address for bounce buffer operation.
* @nslabs: The number of IO TLB blocks (in groups of 64) between @start and
* @end. For default swiotlb, this is command line adjustable via
* setup_io_tlb_npages.
* @used: The number of used IO TLB block.
* @list: The free list describing the number of free entries available
* from each index.
* @orig_addr: The original address corresponding to a mapped entry.
* @alloc_size: Size of the allocated buffer.
* @debugfs: The dentry to debugfs.
* @late_alloc: %true if allocated using the page allocator
* @force_bounce: %true if swiotlb bouncing is forced
* @for_alloc: %true if the pool is used for memory allocation
* @nareas: The area number in the pool.
* @area_nslabs: The slot number in the area.
* @total_used: The total number of slots in the pool that are currently used
* across all areas. Used only for calculating used_hiwater in
* debugfs.
* @used_hiwater: The high water mark for total_used. Used only for reporting
* in debugfs.
*/
struct io_tlb_mem {
phys_addr_t start;
phys_addr_t end;
void *vaddr;
unsigned long nslabs;
unsigned long used;
struct dentry *debugfs;
bool late_alloc;
bool force_bounce;
bool for_alloc;
unsigned int nareas;
unsigned int area_nslabs;
struct io_tlb_area *areas;
struct io_tlb_slot *slots;
#ifdef CONFIG_DEBUG_FS
atomic_long_t total_used;
atomic_long_t used_hiwater;
#endif
};
extern struct io_tlb_mem io_tlb_default_mem;
static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
return mem && paddr >= mem->start && paddr < mem->end;
}
static inline bool is_swiotlb_force_bounce(struct device *dev)
{
struct io_tlb_mem *mem = dev->dma_io_tlb_mem;
return mem && mem->force_bounce;
}
void swiotlb_init(bool addressing_limited, unsigned int flags);
void __init swiotlb_exit(void);
size_t swiotlb_max_mapping_size(struct device *dev);
bool is_swiotlb_active(struct device *dev);
void __init swiotlb_adjust_size(unsigned long size);
#else
static inline void swiotlb_init(bool addressing_limited, unsigned int flags)
{
}
static inline bool is_swiotlb_buffer(struct device *dev, phys_addr_t paddr)
{
return false;
}
static inline bool is_swiotlb_force_bounce(struct device *dev)
{
return false;
}
static inline void swiotlb_exit(void)
{
}
static inline size_t swiotlb_max_mapping_size(struct device *dev)
{
return SIZE_MAX;
}
static inline bool is_swiotlb_active(struct device *dev)
{
return false;
}
static inline void swiotlb_adjust_size(unsigned long size)
{
}
#endif /* CONFIG_SWIOTLB */
extern void swiotlb_print_info(void);
#ifdef CONFIG_DMA_RESTRICTED_POOL
struct page *swiotlb_alloc(struct device *dev, size_t size);
bool swiotlb_free(struct device *dev, struct page *page, size_t size);
static inline bool is_swiotlb_for_alloc(struct device *dev)
{
return dev->dma_io_tlb_mem->for_alloc;
}
#else
static inline struct page *swiotlb_alloc(struct device *dev, size_t size)
{
return NULL;
}
static inline bool swiotlb_free(struct device *dev, struct page *page,
size_t size)
{
return false;
}
static inline bool is_swiotlb_for_alloc(struct device *dev)
{
return false;
}
#endif /* CONFIG_DMA_RESTRICTED_POOL */
extern phys_addr_t swiotlb_unencrypted_base;
#endif /* __LINUX_SWIOTLB_H */