mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-10-02 15:18:19 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/mmc/core/host.c
Jorge Ramirez-Ortiz 67380251e8 mmc: core: Do not force a retune before RPMB switch 
Requesting a retune before switching to the RPMB partition has been
observed to cause CRC errors on the RPMB reads (-EILSEQ).

Since RPMB reads can not be retried, the clients would be directly
affected by the errors.

This commit disables the retune request prior to switching to the RPMB
partition: mmc_retune_pause() no longer triggers a retune before the
pause period begins.

This was verified with the sdhci-of-arasan driver (ZynqMP) configured
for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both
cases, the error was easy to reproduce triggering every few tenths of
reads.

With this commit, systems that were utilizing OP-TEE to access RPMB
variables will experience an enhanced performance. Specifically, when
OP-TEE is configured to employ RPMB as a secure storage solution, it not
only writes the data but also the secure filesystem within the
partition. As a result, retrieving any variable involves multiple RPMB
reads, typically around five.

For context, on ZynqMP, each retune request consumed approximately
8ms. Consequently, reading any RPMB variable used to take at the very
minimum 40ms.

After droping the need to retune before switching to the RPMB partition,
this is no longer the case.

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-03 13:16:26 +01:00

699 lines
18 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/drivers/mmc/core/host.c
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
* Copyright (C) 2007-2008 Pierre Ossman
* Copyright (C) 2010 Linus Walleij
*
* MMC host class device management
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/idr.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pagemap.h>
#include <linux/pm_wakeup.h>
#include <linux/export.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/slot-gpio.h>
#include "core.h"
#include "crypto.h"
#include "host.h"
#include "slot-gpio.h"
#include "pwrseq.h"
#include "sdio_ops.h"
#define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev)
static DEFINE_IDA(mmc_host_ida);
#ifdef CONFIG_PM_SLEEP
static int mmc_host_class_prepare(struct device *dev)
{
struct mmc_host *host = cls_dev_to_mmc_host(dev);
/*
* It's safe to access the bus_ops pointer, as both userspace and the
* workqueue for detecting cards are frozen at this point.
*/
if (!host->bus_ops)
return 0;
/* Validate conditions for system suspend. */
if (host->bus_ops->pre_suspend)
return host->bus_ops->pre_suspend(host);
return 0;
}
static void mmc_host_class_complete(struct device *dev)
{
struct mmc_host *host = cls_dev_to_mmc_host(dev);
_mmc_detect_change(host, 0, false);
}
static const struct dev_pm_ops mmc_host_class_dev_pm_ops = {
.prepare = mmc_host_class_prepare,
.complete = mmc_host_class_complete,
};
#define MMC_HOST_CLASS_DEV_PM_OPS (&mmc_host_class_dev_pm_ops)
#else
#define MMC_HOST_CLASS_DEV_PM_OPS NULL
#endif
static void mmc_host_classdev_release(struct device *dev)
{
struct mmc_host *host = cls_dev_to_mmc_host(dev);
wakeup_source_unregister(host->ws);
if (of_alias_get_id(host->parent->of_node, "mmc") < 0)
ida_simple_remove(&mmc_host_ida, host->index);
kfree(host);
}
static int mmc_host_classdev_shutdown(struct device *dev)
{
struct mmc_host *host = cls_dev_to_mmc_host(dev);
__mmc_stop_host(host);
return 0;
}
static struct class mmc_host_class = {
.name = "mmc_host",
.dev_release = mmc_host_classdev_release,
.shutdown_pre = mmc_host_classdev_shutdown,
.pm = MMC_HOST_CLASS_DEV_PM_OPS,
};
int mmc_register_host_class(void)
{
return class_register(&mmc_host_class);
}
void mmc_unregister_host_class(void)
{
class_unregister(&mmc_host_class);
}
/**
* mmc_retune_enable() - enter a transfer mode that requires retuning
* @host: host which should retune now
*/
void mmc_retune_enable(struct mmc_host *host)
{
host->can_retune = 1;
if (host->retune_period)
mod_timer(&host->retune_timer,
jiffies + host->retune_period * HZ);
}
/*
* Pause re-tuning for a small set of operations. The pause begins after the
* next command.
*/
void mmc_retune_pause(struct mmc_host *host)
{
if (!host->retune_paused) {
host->retune_paused = 1;
mmc_retune_hold(host);
}
}
EXPORT_SYMBOL(mmc_retune_pause);
void mmc_retune_unpause(struct mmc_host *host)
{
if (host->retune_paused) {
host->retune_paused = 0;
mmc_retune_release(host);
}
}
EXPORT_SYMBOL(mmc_retune_unpause);
/**
* mmc_retune_disable() - exit a transfer mode that requires retuning
* @host: host which should not retune anymore
*
* It is not meant for temporarily preventing retuning!
*/
void mmc_retune_disable(struct mmc_host *host)
{
mmc_retune_unpause(host);
host->can_retune = 0;
del_timer_sync(&host->retune_timer);
mmc_retune_clear(host);
}
void mmc_retune_timer_stop(struct mmc_host *host)
{
del_timer_sync(&host->retune_timer);
}
EXPORT_SYMBOL(mmc_retune_timer_stop);
void mmc_retune_hold(struct mmc_host *host)
{
if (!host->hold_retune)
host->retune_now = 1;
host->hold_retune += 1;
}
void mmc_retune_release(struct mmc_host *host)
{
if (host->hold_retune)
host->hold_retune -= 1;
else
WARN_ON(1);
}
EXPORT_SYMBOL(mmc_retune_release);
int mmc_retune(struct mmc_host *host)
{
bool return_to_hs400 = false;
int err;
if (host->retune_now)
host->retune_now = 0;
else
return 0;
if (!host->need_retune || host->doing_retune || !host->card)
return 0;
host->need_retune = 0;
host->doing_retune = 1;
if (host->ios.timing == MMC_TIMING_MMC_HS400) {
err = mmc_hs400_to_hs200(host->card);
if (err)
goto out;
return_to_hs400 = true;
}
err = mmc_execute_tuning(host->card);
if (err)
goto out;
if (return_to_hs400)
err = mmc_hs200_to_hs400(host->card);
out:
host->doing_retune = 0;
return err;
}
static void mmc_retune_timer(struct timer_list *t)
{
struct mmc_host *host = from_timer(host, t, retune_timer);
mmc_retune_needed(host);
}
static void mmc_of_parse_timing_phase(struct device *dev, const char *prop,
struct mmc_clk_phase *phase)
{
int degrees[2] = {0};
int rc;
rc = device_property_read_u32_array(dev, prop, degrees, 2);
phase->valid = !rc;
if (phase->valid) {
phase->in_deg = degrees[0];
phase->out_deg = degrees[1];
}
}
void
mmc_of_parse_clk_phase(struct mmc_host *host, struct mmc_clk_phase_map *map)
{
struct device *dev = host->parent;
mmc_of_parse_timing_phase(dev, "clk-phase-legacy",
&map->phase[MMC_TIMING_LEGACY]);
mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs",
&map->phase[MMC_TIMING_MMC_HS]);
mmc_of_parse_timing_phase(dev, "clk-phase-sd-hs",
&map->phase[MMC_TIMING_SD_HS]);
mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr12",
&map->phase[MMC_TIMING_UHS_SDR12]);
mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr25",
&map->phase[MMC_TIMING_UHS_SDR25]);
mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr50",
&map->phase[MMC_TIMING_UHS_SDR50]);
mmc_of_parse_timing_phase(dev, "clk-phase-uhs-sdr104",
&map->phase[MMC_TIMING_UHS_SDR104]);
mmc_of_parse_timing_phase(dev, "clk-phase-uhs-ddr50",
&map->phase[MMC_TIMING_UHS_DDR50]);
mmc_of_parse_timing_phase(dev, "clk-phase-mmc-ddr52",
&map->phase[MMC_TIMING_MMC_DDR52]);
mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs200",
&map->phase[MMC_TIMING_MMC_HS200]);
mmc_of_parse_timing_phase(dev, "clk-phase-mmc-hs400",
&map->phase[MMC_TIMING_MMC_HS400]);
}
EXPORT_SYMBOL(mmc_of_parse_clk_phase);
/**
* mmc_of_parse() - parse host's device properties
* @host: host whose properties should be parsed.
*
* To keep the rest of the MMC subsystem unaware of whether DT has been
* used to instantiate and configure this host instance or not, we
* parse the properties and set respective generic mmc-host flags and
* parameters.
*/
int mmc_of_parse(struct mmc_host *host)
{
struct device *dev = host->parent;
u32 bus_width, drv_type, cd_debounce_delay_ms;
int ret;
if (!dev || !dev_fwnode(dev))
return 0;
/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
dev_dbg(host->parent,
"\"bus-width\" property is missing, assuming 1 bit.\n");
bus_width = 1;
}
switch (bus_width) {
case 8:
host->caps |= MMC_CAP_8_BIT_DATA;
fallthrough; /* Hosts capable of 8-bit can also do 4 bits */
case 4:
host->caps |= MMC_CAP_4_BIT_DATA;
break;
case 1:
break;
default:
dev_err(host->parent,
"Invalid \"bus-width\" value %u!\n", bus_width);
return -EINVAL;
}
/* f_max is obtained from the optional "max-frequency" property */
device_property_read_u32(dev, "max-frequency", &host->f_max);
/*
* Configure CD and WP pins. They are both by default active low to
* match the SDHCI spec. If GPIOs are provided for CD and / or WP, the
* mmc-gpio helpers are used to attach, configure and use them. If
* polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH
* and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the
* "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability
* is set. If the "non-removable" property is found, the
* MMC_CAP_NONREMOVABLE capability is set and no card-detection
* configuration is performed.
*/
/* Parse Card Detection */
if (device_property_read_bool(dev, "non-removable")) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
if (device_property_read_bool(dev, "cd-inverted"))
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
if (device_property_read_u32(dev, "cd-debounce-delay-ms",
&cd_debounce_delay_ms))
cd_debounce_delay_ms = 200;
if (device_property_read_bool(dev, "broken-cd"))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, false,
cd_debounce_delay_ms * 1000);
if (!ret)
dev_info(host->parent, "Got CD GPIO\n");
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
}
/* Parse Write Protection */
if (device_property_read_bool(dev, "wp-inverted"))
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
ret = mmc_gpiod_request_ro(host, "wp", 0, 0);
if (!ret)
dev_info(host->parent, "Got WP GPIO\n");
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
if (device_property_read_bool(dev, "disable-wp"))
host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
if (device_property_read_bool(dev, "cap-sd-highspeed"))
host->caps |= MMC_CAP_SD_HIGHSPEED;
if (device_property_read_bool(dev, "cap-mmc-highspeed"))
host->caps |= MMC_CAP_MMC_HIGHSPEED;
if (device_property_read_bool(dev, "sd-uhs-sdr12"))
host->caps |= MMC_CAP_UHS_SDR12;
if (device_property_read_bool(dev, "sd-uhs-sdr25"))
host->caps |= MMC_CAP_UHS_SDR25;
if (device_property_read_bool(dev, "sd-uhs-sdr50"))
host->caps |= MMC_CAP_UHS_SDR50;
if (device_property_read_bool(dev, "sd-uhs-sdr104"))
host->caps |= MMC_CAP_UHS_SDR104;
if (device_property_read_bool(dev, "sd-uhs-ddr50"))
host->caps |= MMC_CAP_UHS_DDR50;
if (device_property_read_bool(dev, "cap-power-off-card"))
host->caps |= MMC_CAP_POWER_OFF_CARD;
if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
host->caps |= MMC_CAP_HW_RESET;
if (device_property_read_bool(dev, "cap-sdio-irq"))
host->caps |= MMC_CAP_SDIO_IRQ;
if (device_property_read_bool(dev, "full-pwr-cycle"))
host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
if (device_property_read_bool(dev, "full-pwr-cycle-in-suspend"))
host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND;
if (device_property_read_bool(dev, "keep-power-in-suspend"))
host->pm_caps |= MMC_PM_KEEP_POWER;
if (device_property_read_bool(dev, "wakeup-source") ||
device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
host->caps |= MMC_CAP_3_3V_DDR;
if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
host->caps |= MMC_CAP_1_8V_DDR;
if (device_property_read_bool(dev, "mmc-ddr-1_2v"))
host->caps |= MMC_CAP_1_2V_DDR;
if (device_property_read_bool(dev, "mmc-hs200-1_8v"))
host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
host->caps2 |= MMC_CAP2_HS400_ES;
if (device_property_read_bool(dev, "no-sdio"))
host->caps2 |= MMC_CAP2_NO_SDIO;
if (device_property_read_bool(dev, "no-sd"))
host->caps2 |= MMC_CAP2_NO_SD;
if (device_property_read_bool(dev, "no-mmc"))
host->caps2 |= MMC_CAP2_NO_MMC;
if (device_property_read_bool(dev, "no-mmc-hs400"))
host->caps2 &= ~(MMC_CAP2_HS400_1_8V | MMC_CAP2_HS400_1_2V |
MMC_CAP2_HS400_ES);
/* Must be after "non-removable" check */
if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) {
if (host->caps & MMC_CAP_NONREMOVABLE)
host->fixed_drv_type = drv_type;
else
dev_err(host->parent,
"can't use fixed driver type, media is removable\n");
}
host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
if (host->dsr_req && (host->dsr & ~0xffff)) {
dev_err(host->parent,
"device tree specified broken value for DSR: 0x%x, ignoring\n",
host->dsr);
host->dsr_req = 0;
}
device_property_read_u32(dev, "post-power-on-delay-ms",
&host->ios.power_delay_ms);
return mmc_pwrseq_alloc(host);
}
EXPORT_SYMBOL(mmc_of_parse);
/**
* mmc_of_parse_voltage - return mask of supported voltages
* @host: host whose properties should be parsed.
* @mask: mask of voltages available for MMC/SD/SDIO
*
* Parse the "voltage-ranges" property, returning zero if it is not
* found, negative errno if the voltage-range specification is invalid,
* or one if the voltage-range is specified and successfully parsed.
*/
int mmc_of_parse_voltage(struct mmc_host *host, u32 *mask)
{
const char *prop = "voltage-ranges";
struct device *dev = host->parent;
u32 *voltage_ranges;
int num_ranges, i;
int ret;
if (!device_property_present(dev, prop)) {
dev_dbg(dev, "%s unspecified\n", prop);
return 0;
}
ret = device_property_count_u32(dev, prop);
if (ret < 0)
return ret;
num_ranges = ret / 2;
if (!num_ranges) {
dev_err(dev, "%s empty\n", prop);
return -EINVAL;
}
voltage_ranges = kcalloc(2 * num_ranges, sizeof(*voltage_ranges), GFP_KERNEL);
if (!voltage_ranges)
return -ENOMEM;
ret = device_property_read_u32_array(dev, prop, voltage_ranges, 2 * num_ranges);
if (ret) {
kfree(voltage_ranges);
return ret;
}
for (i = 0; i < num_ranges; i++) {
const int j = i * 2;
u32 ocr_mask;
ocr_mask = mmc_vddrange_to_ocrmask(voltage_ranges[j + 0],
voltage_ranges[j + 1]);
if (!ocr_mask) {
dev_err(dev, "range #%d in %s is invalid\n", i, prop);
kfree(voltage_ranges);
return -EINVAL;
}
*mask |= ocr_mask;
}
kfree(voltage_ranges);
return 1;
}
EXPORT_SYMBOL(mmc_of_parse_voltage);
/**
* mmc_first_nonreserved_index() - get the first index that is not reserved
*/
static int mmc_first_nonreserved_index(void)
{
int max;
max = of_alias_get_highest_id("mmc");
if (max < 0)
return 0;
return max + 1;
}
/**
* mmc_alloc_host - initialise the per-host structure.
* @extra: sizeof private data structure
* @dev: pointer to host device model structure
*
* Initialise the per-host structure.
*/
struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
{
int index;
struct mmc_host *host;
int alias_id, min_idx, max_idx;
host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL);
if (!host)
return NULL;
/* scanning will be enabled when we're ready */
host->rescan_disable = 1;
alias_id = of_alias_get_id(dev->of_node, "mmc");
if (alias_id >= 0) {
index = alias_id;
} else {
min_idx = mmc_first_nonreserved_index();
max_idx = 0;
index = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL);
if (index < 0) {
kfree(host);
return NULL;
}
}
host->index = index;
dev_set_name(&host->class_dev, "mmc%d", host->index);
host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev));
host->parent = dev;
host->class_dev.parent = dev;
host->class_dev.class = &mmc_host_class;
device_initialize(&host->class_dev);
device_enable_async_suspend(&host->class_dev);
if (mmc_gpio_alloc(host)) {
put_device(&host->class_dev);
return NULL;
}
spin_lock_init(&host->lock);
init_waitqueue_head(&host->wq);
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
INIT_WORK(&host->sdio_irq_work, sdio_irq_work);
timer_setup(&host->retune_timer, mmc_retune_timer, 0);
/*
* By default, hosts do not support SGIO or large requests.
* They have to set these according to their abilities.
*/
host->max_segs = 1;
host->max_seg_size = PAGE_SIZE;
host->max_req_size = PAGE_SIZE;
host->max_blk_size = 512;
host->max_blk_count = PAGE_SIZE / 512;
host->fixed_drv_type = -EINVAL;
host->ios.power_delay_ms = 10;
host->ios.power_mode = MMC_POWER_UNDEFINED;
return host;
}
EXPORT_SYMBOL(mmc_alloc_host);
static void devm_mmc_host_release(struct device *dev, void *res)
{
mmc_free_host(*(struct mmc_host **)res);
}
struct mmc_host *devm_mmc_alloc_host(struct device *dev, int extra)
{
struct mmc_host **dr, *host;
dr = devres_alloc(devm_mmc_host_release, sizeof(*dr), GFP_KERNEL);
if (!dr)
return NULL;
host = mmc_alloc_host(extra, dev);
if (!host) {
devres_free(dr);
return NULL;
}
*dr = host;
devres_add(dev, dr);
return host;
}
EXPORT_SYMBOL(devm_mmc_alloc_host);
static int mmc_validate_host_caps(struct mmc_host *host)
{
struct device *dev = host->parent;
u32 caps = host->caps, caps2 = host->caps2;
if (caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) {
dev_warn(dev, "missing ->enable_sdio_irq() ops\n");
return -EINVAL;
}
if (caps2 & (MMC_CAP2_HS400_ES | MMC_CAP2_HS400) &&
!(caps & MMC_CAP_8_BIT_DATA) && !(caps2 & MMC_CAP2_NO_MMC)) {
dev_warn(dev, "drop HS400 support since no 8-bit bus\n");
host->caps2 = caps2 & ~MMC_CAP2_HS400_ES & ~MMC_CAP2_HS400;
}
return 0;
}
/**
* mmc_add_host - initialise host hardware
* @host: mmc host
*
* Register the host with the driver model. The host must be
* prepared to start servicing requests before this function
* completes.
*/
int mmc_add_host(struct mmc_host *host)
{
int err;
err = mmc_validate_host_caps(host);
if (err)
return err;
err = device_add(&host->class_dev);
if (err)
return err;
led_trigger_register_simple(dev_name(&host->class_dev), &host->led);
mmc_add_host_debugfs(host);
mmc_start_host(host);
return 0;
}
EXPORT_SYMBOL(mmc_add_host);
/**
* mmc_remove_host - remove host hardware
* @host: mmc host
*
* Unregister and remove all cards associated with this host,
* and power down the MMC bus. No new requests will be issued
* after this function has returned.
*/
void mmc_remove_host(struct mmc_host *host)
{
mmc_stop_host(host);
mmc_remove_host_debugfs(host);
device_del(&host->class_dev);
led_trigger_unregister_simple(host->led);
}
EXPORT_SYMBOL(mmc_remove_host);
/**
* mmc_free_host - free the host structure
* @host: mmc host
*
* Free the host once all references to it have been dropped.
*/
void mmc_free_host(struct mmc_host *host)
{
cancel_delayed_work_sync(&host->detect);
mmc_pwrseq_free(host);
put_device(&host->class_dev);
}
EXPORT_SYMBOL(mmc_free_host);
Reference in a new issue View git blame Copy permalink