linux-stable/include/scsi/scsi_transport.h
Linus Torvalds ba6d10ab80 SCSI misc on 20190709
This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
 mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
 removal of the osst driver (I heard from Willem privately that he
 would like the driver removed because all his test hardware has
 failed).  Plus number of minor changes, spelling fixes and other
 trivia.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTl4yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdcxAQDCJVbd
 fPUX76/V1ldupunF97+3DTharxxbst+VnkOnCwD8D4c0KFFFOI9+F36cnMGCPegE
 fjy17dQLvsJ4GsidHy8=
 =aS5B
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...
2019-07-11 15:14:01 -07:00

88 lines
2.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Transport specific attributes.
*
* Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef SCSI_TRANSPORT_H
#define SCSI_TRANSPORT_H
#include <linux/transport_class.h>
#include <linux/blkdev.h>
#include <linux/bug.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
struct scsi_transport_template {
/* the attribute containers */
struct transport_container host_attrs;
struct transport_container target_attrs;
struct transport_container device_attrs;
/*
* If set, called from sysfs and legacy procfs rescanning code.
*/
int (*user_scan)(struct Scsi_Host *, uint, uint, u64);
/* The size of the specific transport attribute structure (a
* space of this size will be left at the end of the
* scsi_* structure */
int device_size;
int device_private_offset;
int target_size;
int target_private_offset;
int host_size;
/* no private offset for the host; there's an alternative mechanism */
/*
* True if the transport wants to use a host-based work-queue
*/
unsigned int create_work_queue : 1;
/*
* Allows a transport to override the default error handler.
*/
void (* eh_strategy_handler)(struct Scsi_Host *);
};
#define transport_class_to_shost(tc) \
dev_to_shost((tc)->parent)
/* Private area maintenance. The driver requested allocations come
* directly after the transport class allocations (if any). The idea
* is that you *must* call these only once. The code assumes that the
* initial values are the ones the transport specific code requires */
static inline void
scsi_transport_reserve_target(struct scsi_transport_template * t, int space)
{
BUG_ON(t->target_private_offset != 0);
t->target_private_offset = ALIGN(t->target_size, sizeof(void *));
t->target_size = t->target_private_offset + space;
}
static inline void
scsi_transport_reserve_device(struct scsi_transport_template * t, int space)
{
BUG_ON(t->device_private_offset != 0);
t->device_private_offset = ALIGN(t->device_size, sizeof(void *));
t->device_size = t->device_private_offset + space;
}
static inline void *
scsi_transport_target_data(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
return (u8 *)starget->starget_data
+ shost->transportt->target_private_offset;
}
static inline void *
scsi_transport_device_data(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
return (u8 *)sdev->sdev_data
+ shost->transportt->device_private_offset;
}
void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q);
#endif /* SCSI_TRANSPORT_H */