linux-stable/Documentation/hwmon/lm92
Jean Delvare ede7fbdf52 [PATCH] I2C: Move hwmon drivers (3/3)
Part 3: Move the drivers documentation, plus two general documentation
files.

Note that the patch "adds trailing whitespace", because it does move the
files as-is, and some files happen to have trailing whitespace.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-11 14:47:41 -07:00

37 lines
1.2 KiB
Text

Kernel driver lm92
==================
Supported chips:
* National Semiconductor LM92
Prefix: 'lm92'
Addresses scanned: I2C 0x48 - 0x4b
Datasheet: http://www.national.com/pf/LM/LM92.html
* National Semiconductor LM76
Prefix: 'lm92'
Addresses scanned: none, force parameter needed
Datasheet: http://www.national.com/pf/LM/LM76.html
* Maxim MAX6633/MAX6634/MAX6635
Prefix: 'lm92'
Addresses scanned: I2C 0x48 - 0x4b
MAX6633 with address in 0x40 - 0x47, 0x4c - 0x4f needs force parameter
and MAX6634 with address in 0x4c - 0x4f needs force parameter
Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
Authors:
Abraham van der Merwe <abraham@2d3d.co.za>
Jean Delvare <khali@linux-fr.org>
Description
-----------
This driver implements support for the National Semiconductor LM92
temperature sensor.
Each LM92 temperature sensor supports a single temperature sensor. There are
alarms for high, low, and critical thresholds. There's also an hysteresis to
control the thresholds for resetting alarms.
Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635,
which are mostly compatible. They have not all been tested, so you
may need to use the force parameter.