linux-stable/drivers/clocksource/timer-ti-32k.c
Alexander A. Klimov dcf30fc0ca clocksource/drivers: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200708165856.15322-1-grandmaster@al2klimov.de
2020-07-23 16:57:43 +02:00

165 lines
4.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/**
* timer-ti-32k.c - OMAP2 32k Timer Support
*
* Copyright (C) 2009 Nokia Corporation
*
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
*
* Original driver:
* Copyright (C) 2005 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
* Juha Yrjölä <juha.yrjola@nokia.com>
* OMAP Dual-mode timer framework support by Timo Teras
*
* Some parts based off of TI's 24xx code:
*
* Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com
*/
#include <linux/clk.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/sched_clock.h>
#include <linux/clocksource.h>
#include <linux/of.h>
#include <linux/of_address.h>
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
* higher resolution in free-running counter modes (e.g. 12 MHz xtal),
* but systems won't necessarily want to spend resources that way.
*/
#define OMAP2_32KSYNCNT_REV_OFF 0x0
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
struct ti_32k {
void __iomem *base;
void __iomem *counter;
struct clocksource cs;
};
static inline struct ti_32k *to_ti_32k(struct clocksource *cs)
{
return container_of(cs, struct ti_32k, cs);
}
static u64 notrace ti_32k_read_cycles(struct clocksource *cs)
{
struct ti_32k *ti = to_ti_32k(cs);
return (u64)readl_relaxed(ti->counter);
}
static struct ti_32k ti_32k_timer = {
.cs = {
.name = "32k_counter",
.rating = 250,
.read = ti_32k_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
};
static u64 notrace omap_32k_read_sched_clock(void)
{
return ti_32k_read_cycles(&ti_32k_timer.cs);
}
static void __init ti_32k_timer_enable_clock(struct device_node *np,
const char *name)
{
struct clk *clock;
int error;
clock = of_clk_get_by_name(np->parent, name);
if (IS_ERR(clock)) {
/* Only some SoCs have a separate interface clock */
if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3))
return;
pr_warn("%s: could not get clock %s %li\n",
__func__, name, PTR_ERR(clock));
return;
}
error = clk_prepare_enable(clock);
if (error) {
pr_warn("%s: could not enable %s: %i\n",
__func__, name, error);
return;
}
}
static void __init ti_32k_timer_module_init(struct device_node *np,
void __iomem *base)
{
void __iomem *sysc = base + 4;
if (!of_device_is_compatible(np->parent, "ti,sysc"))
return;
ti_32k_timer_enable_clock(np, "fck");
ti_32k_timer_enable_clock(np, "ick");
/*
* Force idle module as wkup domain is active with MPU.
* No need to tag the module disabled for ti-sysc probe.
*/
writel_relaxed(0, sysc);
}
static int __init ti_32k_timer_init(struct device_node *np)
{
int ret;
ti_32k_timer.base = of_iomap(np, 0);
if (!ti_32k_timer.base) {
pr_err("Can't ioremap 32k timer base\n");
return -ENXIO;
}
if (!of_machine_is_compatible("ti,am43"))
ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
ti_32k_timer.counter = ti_32k_timer.base;
ti_32k_timer_module_init(np, ti_32k_timer.base);
/*
* 32k sync Counter IP register offsets vary between the highlander
* version and the legacy ones.
*
* The 'SCHEME' bits(30-31) of the revision register is used to identify
* the version.
*/
if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) &
OMAP2_32KSYNCNT_REV_SCHEME)
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH;
else
ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW;
pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
ret = clocksource_register_hz(&ti_32k_timer.cs, 32768);
if (ret) {
pr_err("32k_counter: can't register clocksource\n");
return ret;
}
sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
return 0;
}
TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k",
ti_32k_timer_init);