mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Youquan Song](/assets/img/avatar_default.png)
Retrieve and print retry_rd_err_log registers like the earlier change:
commit e80634a75a
("EDAC, skx: Retrieve and print retry_rd_err_log registers")
This is a little trickier than on Skylake because of potential
interference with BIOS use of the same registers. The default
behavior is to ignore these registers.
A module parameter retry_rd_err_log(default=0) controls the mode of operation:
- 0=off : Default.
- 1=bios : Linux doesn't reset any control bits, but just reports values.
This is "no harm" mode, but it may miss reporting some data.
- 2=linux: Linux tries to take control and resets mode bits,
clears valid/UC bits after reading. This should be
more reliable (especially if BIOS interference is reduced
by disabling eMCA reporting mode in BIOS setup).
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20210818175701.1611513-3-tony.luck@intel.com
194 lines
5 KiB
C
194 lines
5 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Common codes for both the skx_edac driver and Intel 10nm server EDAC driver.
|
|
* Originally split out from the skx_edac driver.
|
|
*
|
|
* Copyright (c) 2018, Intel Corporation.
|
|
*/
|
|
|
|
#ifndef _SKX_COMM_EDAC_H
|
|
#define _SKX_COMM_EDAC_H
|
|
|
|
#include <linux/bits.h>
|
|
|
|
#define MSG_SIZE 1024
|
|
|
|
/*
|
|
* Debug macros
|
|
*/
|
|
#define skx_printk(level, fmt, arg...) \
|
|
edac_printk(level, "skx", fmt, ##arg)
|
|
|
|
#define skx_mc_printk(mci, level, fmt, arg...) \
|
|
edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
|
|
|
|
/*
|
|
* Get a bit field at register value <v>, from bit <lo> to bit <hi>
|
|
*/
|
|
#define GET_BITFIELD(v, lo, hi) \
|
|
(((v) & GENMASK_ULL((hi), (lo))) >> (lo))
|
|
|
|
#define SKX_NUM_IMC 2 /* Memory controllers per socket */
|
|
#define SKX_NUM_CHANNELS 3 /* Channels per memory controller */
|
|
#define SKX_NUM_DIMMS 2 /* Max DIMMS per channel */
|
|
|
|
#define I10NM_NUM_DDR_IMC 4
|
|
#define I10NM_NUM_DDR_CHANNELS 2
|
|
#define I10NM_NUM_DDR_DIMMS 2
|
|
|
|
#define I10NM_NUM_HBM_IMC 16
|
|
#define I10NM_NUM_HBM_CHANNELS 2
|
|
#define I10NM_NUM_HBM_DIMMS 1
|
|
|
|
#define I10NM_NUM_IMC (I10NM_NUM_DDR_IMC + I10NM_NUM_HBM_IMC)
|
|
#define I10NM_NUM_CHANNELS MAX(I10NM_NUM_DDR_CHANNELS, I10NM_NUM_HBM_CHANNELS)
|
|
#define I10NM_NUM_DIMMS MAX(I10NM_NUM_DDR_DIMMS, I10NM_NUM_HBM_DIMMS)
|
|
|
|
#define MAX(a, b) ((a) > (b) ? (a) : (b))
|
|
#define NUM_IMC MAX(SKX_NUM_IMC, I10NM_NUM_IMC)
|
|
#define NUM_CHANNELS MAX(SKX_NUM_CHANNELS, I10NM_NUM_CHANNELS)
|
|
#define NUM_DIMMS MAX(SKX_NUM_DIMMS, I10NM_NUM_DIMMS)
|
|
|
|
#define IS_DIMM_PRESENT(r) GET_BITFIELD(r, 15, 15)
|
|
#define IS_NVDIMM_PRESENT(r, i) GET_BITFIELD(r, i, i)
|
|
|
|
/*
|
|
* Each cpu socket contains some pci devices that provide global
|
|
* information, and also some that are local to each of the two
|
|
* memory controllers on the die.
|
|
*/
|
|
struct skx_dev {
|
|
struct list_head list;
|
|
u8 bus[4];
|
|
int seg;
|
|
struct pci_dev *sad_all;
|
|
struct pci_dev *util_all;
|
|
struct pci_dev *uracu; /* for i10nm CPU */
|
|
struct pci_dev *pcu_cr3; /* for HBM memory detection */
|
|
u32 mcroute;
|
|
struct skx_imc {
|
|
struct mem_ctl_info *mci;
|
|
struct pci_dev *mdev; /* for i10nm CPU */
|
|
void __iomem *mbase; /* for i10nm CPU */
|
|
int chan_mmio_sz; /* for i10nm CPU */
|
|
int num_channels; /* channels per memory controller */
|
|
int num_dimms; /* dimms per channel */
|
|
bool hbm_mc;
|
|
u8 mc; /* system wide mc# */
|
|
u8 lmc; /* socket relative mc# */
|
|
u8 src_id, node_id;
|
|
struct skx_channel {
|
|
struct pci_dev *cdev;
|
|
struct pci_dev *edev;
|
|
u32 retry_rd_err_log_s;
|
|
u32 retry_rd_err_log_d;
|
|
struct skx_dimm {
|
|
u8 close_pg;
|
|
u8 bank_xor_enable;
|
|
u8 fine_grain_bank;
|
|
u8 rowbits;
|
|
u8 colbits;
|
|
} dimms[NUM_DIMMS];
|
|
} chan[NUM_CHANNELS];
|
|
} imc[NUM_IMC];
|
|
};
|
|
|
|
struct skx_pvt {
|
|
struct skx_imc *imc;
|
|
};
|
|
|
|
enum type {
|
|
SKX,
|
|
I10NM,
|
|
SPR
|
|
};
|
|
|
|
enum {
|
|
INDEX_SOCKET,
|
|
INDEX_MEMCTRL,
|
|
INDEX_CHANNEL,
|
|
INDEX_DIMM,
|
|
INDEX_NM_FIRST,
|
|
INDEX_NM_MEMCTRL = INDEX_NM_FIRST,
|
|
INDEX_NM_CHANNEL,
|
|
INDEX_NM_DIMM,
|
|
INDEX_MAX
|
|
};
|
|
|
|
#define BIT_NM_MEMCTRL BIT_ULL(INDEX_NM_MEMCTRL)
|
|
#define BIT_NM_CHANNEL BIT_ULL(INDEX_NM_CHANNEL)
|
|
#define BIT_NM_DIMM BIT_ULL(INDEX_NM_DIMM)
|
|
|
|
struct decoded_addr {
|
|
struct skx_dev *dev;
|
|
u64 addr;
|
|
int socket;
|
|
int imc;
|
|
int channel;
|
|
u64 chan_addr;
|
|
int sktways;
|
|
int chanways;
|
|
int dimm;
|
|
int rank;
|
|
int channel_rank;
|
|
u64 rank_address;
|
|
int row;
|
|
int column;
|
|
int bank_address;
|
|
int bank_group;
|
|
};
|
|
|
|
struct res_config {
|
|
enum type type;
|
|
/* Configuration agent device ID */
|
|
unsigned int decs_did;
|
|
/* Default bus number configuration register offset */
|
|
int busno_cfg_offset;
|
|
/* Per DDR channel memory-mapped I/O size */
|
|
int ddr_chan_mmio_sz;
|
|
/* Per HBM channel memory-mapped I/O size */
|
|
int hbm_chan_mmio_sz;
|
|
bool support_ddr5;
|
|
/* SAD device number and function number */
|
|
unsigned int sad_all_devfn;
|
|
int sad_all_offset;
|
|
/* Offsets of retry_rd_err_log registers */
|
|
u32 *offsets_scrub;
|
|
u32 *offsets_demand;
|
|
};
|
|
|
|
typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci,
|
|
struct res_config *cfg);
|
|
typedef bool (*skx_decode_f)(struct decoded_addr *res);
|
|
typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len, bool scrub_err);
|
|
|
|
int __init skx_adxl_get(void);
|
|
void __exit skx_adxl_put(void);
|
|
void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log);
|
|
void skx_set_mem_cfg(bool mem_cfg_2lm);
|
|
|
|
int skx_get_src_id(struct skx_dev *d, int off, u8 *id);
|
|
int skx_get_node_id(struct skx_dev *d, u8 *id);
|
|
|
|
int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list);
|
|
|
|
int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm);
|
|
|
|
int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm,
|
|
struct skx_imc *imc, int chan, int dimmno,
|
|
struct res_config *cfg);
|
|
|
|
int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
|
|
int chan, int dimmno, const char *mod_str);
|
|
|
|
int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev,
|
|
const char *ctl_name, const char *mod_str,
|
|
get_dimm_config_f get_dimm_config,
|
|
struct res_config *cfg);
|
|
|
|
int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
|
|
void *data);
|
|
|
|
void skx_remove(void);
|
|
|
|
#endif /* _SKX_COMM_EDAC_H */
|