mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Sai Krishna Potthuri](/assets/img/avatar_default.png)
commit9989bc33c4
upstream. This reverts commitad2bea79ef
. On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware) using these pinctrl properties can cause system hang because there is missing feature autodetection. When this feature is implemented in the PMUFW, support for these two properties should bring back. Cc: stable@vger.kernel.org Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221017130303.21746-2-sai.krishna.potthuri@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
888 lines
22 KiB
C
888 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* ZynqMP pin controller
|
|
*
|
|
* Copyright (C) 2020, 2021 Xilinx, Inc.
|
|
*
|
|
* Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
|
|
* Rajan Vaja <rajan.vaja@xilinx.com>
|
|
*/
|
|
|
|
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/firmware/xlnx-zynqmp.h>
|
|
|
|
#include <linux/pinctrl/pinmux.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "core.h"
|
|
#include "pinctrl-utils.h"
|
|
|
|
#define ZYNQMP_PIN_PREFIX "MIO"
|
|
#define PINCTRL_GET_FUNC_NAME_RESP_LEN 16
|
|
#define MAX_FUNC_NAME_LEN 16
|
|
#define MAX_GROUP_PIN 50
|
|
#define MAX_PIN_GROUPS 50
|
|
#define END_OF_FUNCTIONS "END_OF_FUNCTIONS"
|
|
#define NUM_GROUPS_PER_RESP 6
|
|
|
|
#define PINCTRL_GET_FUNC_GROUPS_RESP_LEN 12
|
|
#define PINCTRL_GET_PIN_GROUPS_RESP_LEN 12
|
|
#define NA_GROUP 0xFFFF
|
|
#define RESERVED_GROUP 0xFFFE
|
|
|
|
#define DRIVE_STRENGTH_2MA 2
|
|
#define DRIVE_STRENGTH_4MA 4
|
|
#define DRIVE_STRENGTH_8MA 8
|
|
#define DRIVE_STRENGTH_12MA 12
|
|
|
|
/**
|
|
* struct zynqmp_pmux_function - a pinmux function
|
|
* @name: Name of the pin mux function
|
|
* @groups: List of pin groups for this function
|
|
* @ngroups: Number of entries in @groups
|
|
* @node: Firmware node matching with the function
|
|
*
|
|
* This structure holds information about pin control function
|
|
* and function group names supporting that function.
|
|
*/
|
|
struct zynqmp_pmux_function {
|
|
char name[MAX_FUNC_NAME_LEN];
|
|
const char * const *groups;
|
|
unsigned int ngroups;
|
|
};
|
|
|
|
/**
|
|
* struct zynqmp_pinctrl - driver data
|
|
* @pctrl: Pin control device
|
|
* @groups: Pin groups
|
|
* @ngroups: Number of @groups
|
|
* @funcs: Pin mux functions
|
|
* @nfuncs: Number of @funcs
|
|
*
|
|
* This struct is stored as driver data and used to retrieve
|
|
* information regarding pin control functions, groups and
|
|
* group pins.
|
|
*/
|
|
struct zynqmp_pinctrl {
|
|
struct pinctrl_dev *pctrl;
|
|
const struct zynqmp_pctrl_group *groups;
|
|
unsigned int ngroups;
|
|
const struct zynqmp_pmux_function *funcs;
|
|
unsigned int nfuncs;
|
|
};
|
|
|
|
/**
|
|
* struct zynqmp_pctrl_group - Pin control group info
|
|
* @name: Group name
|
|
* @pins: Group pin numbers
|
|
* @npins: Number of pins in the group
|
|
*/
|
|
struct zynqmp_pctrl_group {
|
|
const char *name;
|
|
unsigned int pins[MAX_GROUP_PIN];
|
|
unsigned int npins;
|
|
};
|
|
|
|
static struct pinctrl_desc zynqmp_desc;
|
|
|
|
static int zynqmp_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->ngroups;
|
|
}
|
|
|
|
static const char *zynqmp_pctrl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned int selector)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->groups[selector].name;
|
|
}
|
|
|
|
static int zynqmp_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned int selector,
|
|
const unsigned int **pins,
|
|
unsigned int *npins)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = pctrl->groups[selector].pins;
|
|
*npins = pctrl->groups[selector].npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops zynqmp_pctrl_ops = {
|
|
.get_groups_count = zynqmp_pctrl_get_groups_count,
|
|
.get_group_name = zynqmp_pctrl_get_group_name,
|
|
.get_group_pins = zynqmp_pctrl_get_group_pins,
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_all,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
};
|
|
|
|
static int zynqmp_pinmux_request_pin(struct pinctrl_dev *pctldev,
|
|
unsigned int pin)
|
|
{
|
|
int ret;
|
|
|
|
ret = zynqmp_pm_pinctrl_request(pin);
|
|
if (ret) {
|
|
dev_err(pctldev->dev, "request failed for pin %u\n", pin);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_pmux_get_functions_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->nfuncs;
|
|
}
|
|
|
|
static const char *zynqmp_pmux_get_function_name(struct pinctrl_dev *pctldev,
|
|
unsigned int selector)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return pctrl->funcs[selector].name;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pmux_get_function_groups() - Get groups for the function
|
|
* @pctldev: Pincontrol device pointer.
|
|
* @selector: Function ID
|
|
* @groups: Group names.
|
|
* @num_groups: Number of function groups.
|
|
*
|
|
* Get function's group count and group names.
|
|
*
|
|
* Return: 0
|
|
*/
|
|
static int zynqmp_pmux_get_function_groups(struct pinctrl_dev *pctldev,
|
|
unsigned int selector,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = pctrl->funcs[selector].groups;
|
|
*num_groups = pctrl->funcs[selector].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinmux_set_mux() - Set requested function for the group
|
|
* @pctldev: Pincontrol device pointer.
|
|
* @function: Function ID.
|
|
* @group: Group ID.
|
|
*
|
|
* Loop through all pins of the group and call firmware API
|
|
* to set requested function for all pins in the group.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinmux_set_mux(struct pinctrl_dev *pctldev,
|
|
unsigned int function,
|
|
unsigned int group)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct zynqmp_pctrl_group *pgrp = &pctrl->groups[group];
|
|
int ret, i;
|
|
|
|
for (i = 0; i < pgrp->npins; i++) {
|
|
unsigned int pin = pgrp->pins[i];
|
|
|
|
ret = zynqmp_pm_pinctrl_set_function(pin, function);
|
|
if (ret) {
|
|
dev_err(pctldev->dev, "set mux failed for pin %u\n",
|
|
pin);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_pinmux_release_pin(struct pinctrl_dev *pctldev,
|
|
unsigned int pin)
|
|
{
|
|
int ret;
|
|
|
|
ret = zynqmp_pm_pinctrl_release(pin);
|
|
if (ret) {
|
|
dev_err(pctldev->dev, "free pin failed for pin %u\n",
|
|
pin);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinmux_ops zynqmp_pinmux_ops = {
|
|
.request = zynqmp_pinmux_request_pin,
|
|
.get_functions_count = zynqmp_pmux_get_functions_count,
|
|
.get_function_name = zynqmp_pmux_get_function_name,
|
|
.get_function_groups = zynqmp_pmux_get_function_groups,
|
|
.set_mux = zynqmp_pinmux_set_mux,
|
|
.free = zynqmp_pinmux_release_pin,
|
|
};
|
|
|
|
/**
|
|
* zynqmp_pinconf_cfg_get() - get config value for the pin
|
|
* @pctldev: Pin control device pointer.
|
|
* @pin: Pin number.
|
|
* @config: Value of config param.
|
|
*
|
|
* Get value of the requested configuration parameter for the
|
|
* given pin.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinconf_cfg_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
unsigned int arg, param = pinconf_to_config_param(*config);
|
|
int ret;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_SLEW_RATE:
|
|
param = PM_PINCTRL_CONFIG_SLEW_RATE;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
param = PM_PINCTRL_CONFIG_PULL_CTRL;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
if (arg != PM_PINCTRL_BIAS_PULL_UP)
|
|
return -EINVAL;
|
|
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
param = PM_PINCTRL_CONFIG_PULL_CTRL;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
if (arg != PM_PINCTRL_BIAS_PULL_DOWN)
|
|
return -EINVAL;
|
|
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
param = PM_PINCTRL_CONFIG_BIAS_STATUS;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
if (arg != PM_PINCTRL_BIAS_DISABLE)
|
|
return -EINVAL;
|
|
|
|
arg = 1;
|
|
break;
|
|
case PIN_CONFIG_POWER_SOURCE:
|
|
param = PM_PINCTRL_CONFIG_VOLTAGE_STATUS;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
break;
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
param = PM_PINCTRL_CONFIG_SCHMITT_CMOS;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
param = PM_PINCTRL_CONFIG_DRIVE_STRENGTH;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &arg);
|
|
switch (arg) {
|
|
case PM_PINCTRL_DRIVE_STRENGTH_2MA:
|
|
arg = DRIVE_STRENGTH_2MA;
|
|
break;
|
|
case PM_PINCTRL_DRIVE_STRENGTH_4MA:
|
|
arg = DRIVE_STRENGTH_4MA;
|
|
break;
|
|
case PM_PINCTRL_DRIVE_STRENGTH_8MA:
|
|
arg = DRIVE_STRENGTH_8MA;
|
|
break;
|
|
case PM_PINCTRL_DRIVE_STRENGTH_12MA:
|
|
arg = DRIVE_STRENGTH_12MA;
|
|
break;
|
|
default:
|
|
/* Invalid drive strength */
|
|
dev_warn(pctldev->dev,
|
|
"Invalid drive strength for pin %d\n",
|
|
pin);
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
ret = -ENOTSUPP;
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
param = pinconf_to_config_param(*config);
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinconf_cfg_set() - Set requested config for the pin
|
|
* @pctldev: Pincontrol device pointer.
|
|
* @pin: Pin number.
|
|
* @configs: Configuration to set.
|
|
* @num_configs: Number of configurations.
|
|
*
|
|
* Loop through all configurations and call firmware API
|
|
* to set requested configurations for the pin.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinconf_cfg_set(struct pinctrl_dev *pctldev,
|
|
unsigned int pin, unsigned long *configs,
|
|
unsigned int num_configs)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
unsigned int param = pinconf_to_config_param(configs[i]);
|
|
unsigned int arg = pinconf_to_config_argument(configs[i]);
|
|
unsigned int value;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_SLEW_RATE:
|
|
param = PM_PINCTRL_CONFIG_SLEW_RATE;
|
|
ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
param = PM_PINCTRL_CONFIG_PULL_CTRL;
|
|
arg = PM_PINCTRL_BIAS_PULL_UP;
|
|
ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
|
|
break;
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
param = PM_PINCTRL_CONFIG_PULL_CTRL;
|
|
arg = PM_PINCTRL_BIAS_PULL_DOWN;
|
|
ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
|
|
break;
|
|
case PIN_CONFIG_BIAS_DISABLE:
|
|
param = PM_PINCTRL_CONFIG_BIAS_STATUS;
|
|
arg = PM_PINCTRL_BIAS_DISABLE;
|
|
ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
|
|
break;
|
|
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
|
|
param = PM_PINCTRL_CONFIG_SCHMITT_CMOS;
|
|
ret = zynqmp_pm_pinctrl_set_config(pin, param, arg);
|
|
break;
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
switch (arg) {
|
|
case DRIVE_STRENGTH_2MA:
|
|
value = PM_PINCTRL_DRIVE_STRENGTH_2MA;
|
|
break;
|
|
case DRIVE_STRENGTH_4MA:
|
|
value = PM_PINCTRL_DRIVE_STRENGTH_4MA;
|
|
break;
|
|
case DRIVE_STRENGTH_8MA:
|
|
value = PM_PINCTRL_DRIVE_STRENGTH_8MA;
|
|
break;
|
|
case DRIVE_STRENGTH_12MA:
|
|
value = PM_PINCTRL_DRIVE_STRENGTH_12MA;
|
|
break;
|
|
default:
|
|
/* Invalid drive strength */
|
|
dev_warn(pctldev->dev,
|
|
"Invalid drive strength for pin %d\n",
|
|
pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
param = PM_PINCTRL_CONFIG_DRIVE_STRENGTH;
|
|
ret = zynqmp_pm_pinctrl_set_config(pin, param, value);
|
|
break;
|
|
case PIN_CONFIG_POWER_SOURCE:
|
|
param = PM_PINCTRL_CONFIG_VOLTAGE_STATUS;
|
|
ret = zynqmp_pm_pinctrl_get_config(pin, param, &value);
|
|
|
|
if (arg != value)
|
|
dev_warn(pctldev->dev,
|
|
"Invalid IO Standard requested for pin %d\n",
|
|
pin);
|
|
|
|
break;
|
|
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
|
|
case PIN_CONFIG_MODE_LOW_POWER:
|
|
/*
|
|
* These cases are mentioned in dts but configurable
|
|
* registers are unknown. So falling through to ignore
|
|
* boot time warnings as of now.
|
|
*/
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
dev_warn(pctldev->dev,
|
|
"unsupported configuration parameter '%u'\n",
|
|
param);
|
|
ret = -ENOTSUPP;
|
|
break;
|
|
}
|
|
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
if (ret)
|
|
dev_warn(pctldev->dev,
|
|
"failed to set: pin %u param %u value %u\n",
|
|
pin, param, arg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinconf_group_set() - Set requested config for the group
|
|
* @pctldev: Pincontrol device pointer.
|
|
* @selector: Group ID.
|
|
* @configs: Configuration to set.
|
|
* @num_configs: Number of configurations.
|
|
*
|
|
* Call function to set configs for each pin in the group.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinconf_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned int selector,
|
|
unsigned long *configs,
|
|
unsigned int num_configs)
|
|
{
|
|
int i, ret;
|
|
struct zynqmp_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct zynqmp_pctrl_group *pgrp = &pctrl->groups[selector];
|
|
|
|
for (i = 0; i < pgrp->npins; i++) {
|
|
ret = zynqmp_pinconf_cfg_set(pctldev, pgrp->pins[i], configs,
|
|
num_configs);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops zynqmp_pinconf_ops = {
|
|
.is_generic = true,
|
|
.pin_config_get = zynqmp_pinconf_cfg_get,
|
|
.pin_config_set = zynqmp_pinconf_cfg_set,
|
|
.pin_config_group_set = zynqmp_pinconf_group_set,
|
|
};
|
|
|
|
static struct pinctrl_desc zynqmp_desc = {
|
|
.name = "zynqmp_pinctrl",
|
|
.owner = THIS_MODULE,
|
|
.pctlops = &zynqmp_pctrl_ops,
|
|
.pmxops = &zynqmp_pinmux_ops,
|
|
.confops = &zynqmp_pinconf_ops,
|
|
};
|
|
|
|
static int zynqmp_pinctrl_get_function_groups(u32 fid, u32 index, u16 *groups)
|
|
{
|
|
struct zynqmp_pm_query_data qdata = {0};
|
|
u32 payload[PAYLOAD_ARG_CNT];
|
|
int ret;
|
|
|
|
qdata.qid = PM_QID_PINCTRL_GET_FUNCTION_GROUPS;
|
|
qdata.arg1 = fid;
|
|
qdata.arg2 = index;
|
|
|
|
ret = zynqmp_pm_query_data(qdata, payload);
|
|
if (ret)
|
|
return ret;
|
|
|
|
memcpy(groups, &payload[1], PINCTRL_GET_FUNC_GROUPS_RESP_LEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_pinctrl_get_func_num_groups(u32 fid, unsigned int *ngroups)
|
|
{
|
|
struct zynqmp_pm_query_data qdata = {0};
|
|
u32 payload[PAYLOAD_ARG_CNT];
|
|
int ret;
|
|
|
|
qdata.qid = PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS;
|
|
qdata.arg1 = fid;
|
|
|
|
ret = zynqmp_pm_query_data(qdata, payload);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*ngroups = payload[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinctrl_prepare_func_groups() - prepare function and groups data
|
|
* @dev: Device pointer.
|
|
* @fid: Function ID.
|
|
* @func: Function data.
|
|
* @groups: Groups data.
|
|
*
|
|
* Query firmware to get group IDs for each function. Firmware returns
|
|
* group IDs. Based on the group index for the function, group names in
|
|
* the function are stored. For example, the first group in "eth0" function
|
|
* is named as "eth0_0" and the second group as "eth0_1" and so on.
|
|
*
|
|
* Based on the group ID received from the firmware, function stores name of
|
|
* the group for that group ID. For example, if "eth0" first group ID
|
|
* is x, groups[x] name will be stored as "eth0_0".
|
|
*
|
|
* Once done for each function, each function would have its group names
|
|
* and each group would also have their names.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinctrl_prepare_func_groups(struct device *dev, u32 fid,
|
|
struct zynqmp_pmux_function *func,
|
|
struct zynqmp_pctrl_group *groups)
|
|
{
|
|
u16 resp[NUM_GROUPS_PER_RESP] = {0};
|
|
const char **fgroups;
|
|
int ret, index, i;
|
|
|
|
fgroups = devm_kzalloc(dev, sizeof(*fgroups) * func->ngroups, GFP_KERNEL);
|
|
if (!fgroups)
|
|
return -ENOMEM;
|
|
|
|
for (index = 0; index < func->ngroups; index += NUM_GROUPS_PER_RESP) {
|
|
ret = zynqmp_pinctrl_get_function_groups(fid, index, resp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < NUM_GROUPS_PER_RESP; i++) {
|
|
if (resp[i] == NA_GROUP)
|
|
goto done;
|
|
|
|
if (resp[i] == RESERVED_GROUP)
|
|
continue;
|
|
|
|
fgroups[index + i] = devm_kasprintf(dev, GFP_KERNEL,
|
|
"%s_%d_grp",
|
|
func->name,
|
|
index + i);
|
|
if (!fgroups[index + i])
|
|
return -ENOMEM;
|
|
|
|
groups[resp[i]].name = devm_kasprintf(dev, GFP_KERNEL,
|
|
"%s_%d_grp",
|
|
func->name,
|
|
index + i);
|
|
if (!groups[resp[i]].name)
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
done:
|
|
func->groups = fgroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zynqmp_pinctrl_get_function_name(u32 fid, char *name)
|
|
{
|
|
struct zynqmp_pm_query_data qdata = {0};
|
|
u32 payload[PAYLOAD_ARG_CNT];
|
|
|
|
qdata.qid = PM_QID_PINCTRL_GET_FUNCTION_NAME;
|
|
qdata.arg1 = fid;
|
|
|
|
/*
|
|
* Name of the function is maximum 16 bytes and cannot
|
|
* accommodate the return value in SMC buffers, hence ignoring
|
|
* the return value for this specific qid.
|
|
*/
|
|
zynqmp_pm_query_data(qdata, payload);
|
|
memcpy(name, payload, PINCTRL_GET_FUNC_NAME_RESP_LEN);
|
|
}
|
|
|
|
static int zynqmp_pinctrl_get_num_functions(unsigned int *nfuncs)
|
|
{
|
|
struct zynqmp_pm_query_data qdata = {0};
|
|
u32 payload[PAYLOAD_ARG_CNT];
|
|
int ret;
|
|
|
|
qdata.qid = PM_QID_PINCTRL_GET_NUM_FUNCTIONS;
|
|
|
|
ret = zynqmp_pm_query_data(qdata, payload);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*nfuncs = payload[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_pinctrl_get_pin_groups(u32 pin, u32 index, u16 *groups)
|
|
{
|
|
struct zynqmp_pm_query_data qdata = {0};
|
|
u32 payload[PAYLOAD_ARG_CNT];
|
|
int ret;
|
|
|
|
qdata.qid = PM_QID_PINCTRL_GET_PIN_GROUPS;
|
|
qdata.arg1 = pin;
|
|
qdata.arg2 = index;
|
|
|
|
ret = zynqmp_pm_query_data(qdata, payload);
|
|
if (ret)
|
|
return ret;
|
|
|
|
memcpy(groups, &payload[1], PINCTRL_GET_PIN_GROUPS_RESP_LEN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zynqmp_pinctrl_group_add_pin(struct zynqmp_pctrl_group *group,
|
|
unsigned int pin)
|
|
{
|
|
group->pins[group->npins++] = pin;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinctrl_create_pin_groups() - assign pins to respective groups
|
|
* @dev: Device pointer.
|
|
* @groups: Groups data.
|
|
* @pin: Pin number.
|
|
*
|
|
* Query firmware to get groups available for the given pin.
|
|
* Based on the firmware response(group IDs for the pin), add
|
|
* pin number to the respective group's pin array.
|
|
*
|
|
* Once all pins are queries, each group would have its number
|
|
* of pins and pin numbers data.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinctrl_create_pin_groups(struct device *dev,
|
|
struct zynqmp_pctrl_group *groups,
|
|
unsigned int pin)
|
|
{
|
|
u16 resp[NUM_GROUPS_PER_RESP] = {0};
|
|
int ret, i, index = 0;
|
|
|
|
do {
|
|
ret = zynqmp_pinctrl_get_pin_groups(pin, index, resp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < NUM_GROUPS_PER_RESP; i++) {
|
|
if (resp[i] == NA_GROUP)
|
|
return ret;
|
|
|
|
if (resp[i] == RESERVED_GROUP)
|
|
continue;
|
|
|
|
zynqmp_pinctrl_group_add_pin(&groups[resp[i]], pin);
|
|
}
|
|
index += NUM_GROUPS_PER_RESP;
|
|
} while (index <= MAX_PIN_GROUPS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinctrl_prepare_group_pins() - prepare each group's pin data
|
|
* @dev: Device pointer.
|
|
* @groups: Groups data.
|
|
* @ngroups: Number of groups.
|
|
*
|
|
* Prepare pin number and number of pins data for each pins.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinctrl_prepare_group_pins(struct device *dev,
|
|
struct zynqmp_pctrl_group *groups,
|
|
unsigned int ngroups)
|
|
{
|
|
unsigned int pin;
|
|
int ret;
|
|
|
|
for (pin = 0; pin < zynqmp_desc.npins; pin++) {
|
|
ret = zynqmp_pinctrl_create_pin_groups(dev, groups, pin);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinctrl_prepare_function_info() - prepare function info
|
|
* @dev: Device pointer.
|
|
* @pctrl: Pin control driver data.
|
|
*
|
|
* Query firmware for functions, groups and pin information and
|
|
* prepare pin control driver data.
|
|
*
|
|
* Query number of functions and number of function groups (number
|
|
* of groups in the given function) to allocate required memory buffers
|
|
* for functions and groups. Once buffers are allocated to store
|
|
* functions and groups data, query and store required information
|
|
* (number of groups and group names for each function, number of
|
|
* pins and pin numbers for each group).
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinctrl_prepare_function_info(struct device *dev,
|
|
struct zynqmp_pinctrl *pctrl)
|
|
{
|
|
struct zynqmp_pmux_function *funcs;
|
|
struct zynqmp_pctrl_group *groups;
|
|
int ret, i;
|
|
|
|
ret = zynqmp_pinctrl_get_num_functions(&pctrl->nfuncs);
|
|
if (ret)
|
|
return ret;
|
|
|
|
funcs = devm_kzalloc(dev, sizeof(*funcs) * pctrl->nfuncs, GFP_KERNEL);
|
|
if (!funcs)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < pctrl->nfuncs; i++) {
|
|
zynqmp_pinctrl_get_function_name(i, funcs[i].name);
|
|
|
|
ret = zynqmp_pinctrl_get_func_num_groups(i, &funcs[i].ngroups);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pctrl->ngroups += funcs[i].ngroups;
|
|
}
|
|
|
|
groups = devm_kzalloc(dev, sizeof(*groups) * pctrl->ngroups, GFP_KERNEL);
|
|
if (!groups)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < pctrl->nfuncs; i++) {
|
|
ret = zynqmp_pinctrl_prepare_func_groups(dev, i, &funcs[i],
|
|
groups);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = zynqmp_pinctrl_prepare_group_pins(dev, groups, pctrl->ngroups);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pctrl->funcs = funcs;
|
|
pctrl->groups = groups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_pinctrl_get_num_pins(unsigned int *npins)
|
|
{
|
|
struct zynqmp_pm_query_data qdata = {0};
|
|
u32 payload[PAYLOAD_ARG_CNT];
|
|
int ret;
|
|
|
|
qdata.qid = PM_QID_PINCTRL_GET_NUM_PINS;
|
|
|
|
ret = zynqmp_pm_query_data(qdata, payload);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*npins = payload[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* zynqmp_pinctrl_prepare_pin_desc() - prepare pin description info
|
|
* @dev: Device pointer.
|
|
* @zynqmp_pins: Pin information.
|
|
* @npins: Number of pins.
|
|
*
|
|
* Query number of pins information from firmware and prepare pin
|
|
* description containing pin number and pin name.
|
|
*
|
|
* Return: 0 on success else error code.
|
|
*/
|
|
static int zynqmp_pinctrl_prepare_pin_desc(struct device *dev,
|
|
const struct pinctrl_pin_desc
|
|
**zynqmp_pins,
|
|
unsigned int *npins)
|
|
{
|
|
struct pinctrl_pin_desc *pins, *pin;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = zynqmp_pinctrl_get_num_pins(npins);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pins = devm_kzalloc(dev, sizeof(*pins) * *npins, GFP_KERNEL);
|
|
if (!pins)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < *npins; i++) {
|
|
pin = &pins[i];
|
|
pin->number = i;
|
|
pin->name = devm_kasprintf(dev, GFP_KERNEL, "%s%d",
|
|
ZYNQMP_PIN_PREFIX, i);
|
|
if (!pin->name)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
*zynqmp_pins = pins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zynqmp_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct zynqmp_pinctrl *pctrl;
|
|
int ret;
|
|
|
|
pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
|
|
if (!pctrl)
|
|
return -ENOMEM;
|
|
|
|
ret = zynqmp_pinctrl_prepare_pin_desc(&pdev->dev,
|
|
&zynqmp_desc.pins,
|
|
&zynqmp_desc.npins);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "pin desc prepare fail with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = zynqmp_pinctrl_prepare_function_info(&pdev->dev, pctrl);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "function info prepare fail with %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pctrl->pctrl = devm_pinctrl_register(&pdev->dev, &zynqmp_desc, pctrl);
|
|
if (IS_ERR(pctrl->pctrl))
|
|
return PTR_ERR(pctrl->pctrl);
|
|
|
|
platform_set_drvdata(pdev, pctrl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id zynqmp_pinctrl_of_match[] = {
|
|
{ .compatible = "xlnx,zynqmp-pinctrl" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, zynqmp_pinctrl_of_match);
|
|
|
|
static struct platform_driver zynqmp_pinctrl_driver = {
|
|
.driver = {
|
|
.name = "zynqmp-pinctrl",
|
|
.of_match_table = zynqmp_pinctrl_of_match,
|
|
},
|
|
.probe = zynqmp_pinctrl_probe,
|
|
};
|
|
module_platform_driver(zynqmp_pinctrl_driver);
|
|
|
|
MODULE_AUTHOR("Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>");
|
|
MODULE_DESCRIPTION("ZynqMP Pin Controller Driver");
|
|
MODULE_LICENSE("GPL v2");
|