mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Jingoo Han](/assets/img/avatar_default.png)
Use the wrapper function for getting the driver data using pci_dev instead of using dev_get_drvdata() with &pdev->dev, so we can directly pass a struct pci_dev. This is a purely cosmetic change. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
372 lines
9.3 KiB
C
372 lines
9.3 KiB
C
/*
|
|
* pata-cs5530.c - CS5530 PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
*
|
|
* based upon cs5530.c by Mark Lord.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* Loosely based on the piix & svwks drivers.
|
|
*
|
|
* Documentation:
|
|
* Available from AMD web site.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#define DRV_NAME "pata_cs5530"
|
|
#define DRV_VERSION "0.7.4"
|
|
|
|
static void __iomem *cs5530_port_base(struct ata_port *ap)
|
|
{
|
|
unsigned long bmdma = (unsigned long)ap->ioaddr.bmdma_addr;
|
|
|
|
return (void __iomem *)((bmdma & ~0x0F) + 0x20 + 0x10 * ap->port_no);
|
|
}
|
|
|
|
/**
|
|
* cs5530_set_piomode - PIO setup
|
|
* @ap: ATA interface
|
|
* @adev: device on the interface
|
|
*
|
|
* Set our PIO requirements. This is fairly simple on the CS5530
|
|
* chips.
|
|
*/
|
|
|
|
static void cs5530_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const unsigned int cs5530_pio_timings[2][5] = {
|
|
{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
|
|
{0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
|
|
};
|
|
void __iomem *base = cs5530_port_base(ap);
|
|
u32 tuning;
|
|
int format;
|
|
|
|
/* Find out which table to use */
|
|
tuning = ioread32(base + 0x04);
|
|
format = (tuning & 0x80000000UL) ? 1 : 0;
|
|
|
|
/* Now load the right timing register */
|
|
if (adev->devno)
|
|
base += 0x08;
|
|
|
|
iowrite32(cs5530_pio_timings[format][adev->pio_mode - XFER_PIO_0], base);
|
|
}
|
|
|
|
/**
|
|
* cs5530_set_dmamode - DMA timing setup
|
|
* @ap: ATA interface
|
|
* @adev: Device being configured
|
|
*
|
|
* We cannot mix MWDMA and UDMA without reloading timings each switch
|
|
* master to slave. We track the last DMA setup in order to minimise
|
|
* reloads.
|
|
*/
|
|
|
|
static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
void __iomem *base = cs5530_port_base(ap);
|
|
u32 tuning, timing = 0;
|
|
u8 reg;
|
|
|
|
/* Find out which table to use */
|
|
tuning = ioread32(base + 0x04);
|
|
|
|
switch(adev->dma_mode) {
|
|
case XFER_UDMA_0:
|
|
timing = 0x00921250;break;
|
|
case XFER_UDMA_1:
|
|
timing = 0x00911140;break;
|
|
case XFER_UDMA_2:
|
|
timing = 0x00911030;break;
|
|
case XFER_MW_DMA_0:
|
|
timing = 0x00077771;break;
|
|
case XFER_MW_DMA_1:
|
|
timing = 0x00012121;break;
|
|
case XFER_MW_DMA_2:
|
|
timing = 0x00002020;break;
|
|
default:
|
|
BUG();
|
|
}
|
|
/* Merge in the PIO format bit */
|
|
timing |= (tuning & 0x80000000UL);
|
|
if (adev->devno == 0) /* Master */
|
|
iowrite32(timing, base + 0x04);
|
|
else {
|
|
if (timing & 0x00100000)
|
|
tuning |= 0x00100000; /* UDMA for both */
|
|
else
|
|
tuning &= ~0x00100000; /* MWDMA for both */
|
|
iowrite32(tuning, base + 0x04);
|
|
iowrite32(timing, base + 0x0C);
|
|
}
|
|
|
|
/* Set the DMA capable bit in the BMDMA area */
|
|
reg = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
|
|
reg |= (1 << (5 + adev->devno));
|
|
iowrite8(reg, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
|
|
|
|
/* Remember the last DMA setup we did */
|
|
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* cs5530_qc_issue - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* necessary. Specifically we have a problem that there is only
|
|
* one MWDMA/UDMA bit.
|
|
*/
|
|
|
|
static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
struct ata_device *prev = ap->private_data;
|
|
|
|
/* See if the DMA settings could be wrong */
|
|
if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
|
|
/* Maybe, but do the channels match MWDMA/UDMA ? */
|
|
if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
|
|
(ata_using_udma(prev) && !ata_using_udma(adev)))
|
|
/* Switch the mode bits */
|
|
cs5530_set_dmamode(ap, adev);
|
|
}
|
|
|
|
return ata_bmdma_qc_issue(qc);
|
|
}
|
|
|
|
static struct scsi_host_template cs5530_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
|
|
};
|
|
|
|
static struct ata_port_operations cs5530_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.qc_prep = ata_bmdma_dumb_qc_prep,
|
|
.qc_issue = cs5530_qc_issue,
|
|
|
|
.cable_detect = ata_cable_40wire,
|
|
.set_piomode = cs5530_set_piomode,
|
|
.set_dmamode = cs5530_set_dmamode,
|
|
};
|
|
|
|
static const struct dmi_system_id palmax_dmi_table[] = {
|
|
{
|
|
.ident = "Palmax PD1100",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "Cyrix"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Caddis"),
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static int cs5530_is_palmax(void)
|
|
{
|
|
if (dmi_check_system(palmax_dmi_table)) {
|
|
printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* cs5530_init_chip - Chipset init
|
|
*
|
|
* Perform the chip initialisation work that is shared between both
|
|
* setup and resume paths
|
|
*/
|
|
|
|
static int cs5530_init_chip(void)
|
|
{
|
|
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL, *dev = NULL;
|
|
|
|
while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
|
|
master_0 = pci_dev_get(dev);
|
|
break;
|
|
case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
|
|
cs5530_0 = pci_dev_get(dev);
|
|
break;
|
|
}
|
|
}
|
|
if (!master_0) {
|
|
printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
|
|
goto fail_put;
|
|
}
|
|
if (!cs5530_0) {
|
|
printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
|
|
goto fail_put;
|
|
}
|
|
|
|
pci_set_master(cs5530_0);
|
|
pci_try_set_mwi(cs5530_0);
|
|
|
|
/*
|
|
* Set PCI CacheLineSize to 16-bytes:
|
|
* --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
|
|
*
|
|
* Note: This value is constant because the 5530 is only a Geode companion
|
|
*/
|
|
|
|
pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
|
|
|
|
/*
|
|
* Disable trapping of UDMA register accesses (Win98 hack):
|
|
* --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
|
|
*/
|
|
|
|
pci_write_config_word(cs5530_0, 0xd0, 0x5006);
|
|
|
|
/*
|
|
* Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
|
|
* The other settings are what is necessary to get the register
|
|
* into a sane state for IDE DMA operation.
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x40, 0x1e);
|
|
|
|
/*
|
|
* Set max PCI burst size (16-bytes seems to work best):
|
|
* 16bytes: set bit-1 at 0x41 (reg value of 0x16)
|
|
* all others: clear bit-1 at 0x41, and do:
|
|
* 128bytes: OR 0x00 at 0x41
|
|
* 256bytes: OR 0x04 at 0x41
|
|
* 512bytes: OR 0x08 at 0x41
|
|
* 1024bytes: OR 0x0c at 0x41
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x41, 0x14);
|
|
|
|
/*
|
|
* These settings are necessary to get the chip
|
|
* into a sane state for IDE DMA operation.
|
|
*/
|
|
|
|
pci_write_config_byte(master_0, 0x42, 0x00);
|
|
pci_write_config_byte(master_0, 0x43, 0xc1);
|
|
|
|
pci_dev_put(master_0);
|
|
pci_dev_put(cs5530_0);
|
|
return 0;
|
|
fail_put:
|
|
if (master_0)
|
|
pci_dev_put(master_0);
|
|
if (cs5530_0)
|
|
pci_dev_put(cs5530_0);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* cs5530_init_one - Initialise a CS5530
|
|
* @dev: PCI device
|
|
* @id: Entry in match table
|
|
*
|
|
* Install a driver for the newly found CS5530 companion chip. Most of
|
|
* this is just housekeeping. We have to set the chip up correctly and
|
|
* turn off various bits of emulation magic.
|
|
*/
|
|
|
|
static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA2,
|
|
.port_ops = &cs5530_port_ops
|
|
};
|
|
/* The docking connector doesn't do UDMA, and it seems not MWDMA */
|
|
static const struct ata_port_info info_palmax_secondary = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.port_ops = &cs5530_port_ops
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
int rc;
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Chip initialisation */
|
|
if (cs5530_init_chip())
|
|
return -ENODEV;
|
|
|
|
if (cs5530_is_palmax())
|
|
ppi[1] = &info_palmax_secondary;
|
|
|
|
/* Now kick off ATA set up */
|
|
return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int cs5530_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* If we fail on resume we are doomed */
|
|
if (cs5530_init_chip())
|
|
return -EIO;
|
|
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct pci_device_id cs5530[] = {
|
|
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cs5530_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cs5530,
|
|
.probe = cs5530_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = cs5530_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
module_pci_driver(cs5530_pci_driver);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cs5530);
|
|
MODULE_VERSION(DRV_VERSION);
|