linux-stable/drivers/net/phy
Guangbin Huang d9032dba5a net: phy: fix save wrong speed and duplex problem if autoneg is on
If phy uses generic driver and autoneg is on, enter command
"ethtool -s eth0 speed 50" will not change phy speed actually, but
command "ethtool eth0" shows speed is 50Mb/s because phydev->speed
has been set to 50 and no update later.

And duplex setting has same problem too.

However, if autoneg is on, phy only changes speed and duplex according to
phydev->advertising, but not phydev->speed and phydev->duplex. So in this
case, phydev->speed and phydev->duplex don't need to be set in function
phy_ethtool_ksettings_set() if autoneg is on.

Fixes: 51e2a3846e ("PHY: Avoid unnecessary aneg restarts")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-01 13:16:16 -08:00
..
mscc net: phy: mscc: coma mode disabled for VSC8514 2021-02-16 14:06:19 -08:00
adin.c net: phy: adin: remove the use of the .ack_interrupt() 2020-11-17 11:37:09 -08:00
amd.c net: phy: amd: remove the use of .ack_interrupt() 2020-11-17 11:37:00 -08:00
aquantia.h
aquantia_hwmon.c
aquantia_main.c net: phy: aquantia: do not return an error on clearing pending IRQs 2020-11-11 14:09:54 -08:00
at803x.c net: phy: at803x: add MDIX support to AR8031/33 2021-02-15 15:20:00 -08:00
ax88796b.c
bcm-cygnus.c net: phy: broadcom: remove use of ack_interrupt() 2020-11-05 16:32:39 -08:00
bcm-phy-lib.c net: phy: broadcom: remove use of ack_interrupt() 2020-11-05 16:32:39 -08:00
bcm-phy-lib.h net: phy: broadcom: implement generic .handle_interrupt() callback 2020-11-05 16:32:27 -08:00
bcm7xxx.c net: phy: bcm7xxx: Add an entry for BCM72116 2021-01-07 14:46:09 -08:00
bcm63xx.c net: phy: broadcom: remove use of ack_interrupt() 2020-11-05 16:32:39 -08:00
bcm87xx.c net: phy: broadcom: remove use of ack_interrupt() 2020-11-05 16:32:39 -08:00
bcm54140.c net: phy: broadcom: remove use of ack_interrupt() 2020-11-05 16:32:39 -08:00
bcm84881.c net: phy: bcm84881: clear settings on link down 2020-04-23 15:55:35 -07:00
broadcom.c net: phy: broadcom: Do not modify LED configuration for SFP module PHYs 2021-02-16 15:23:23 -08:00
cicada.c net: phy: cicada: remove the use of .ack_interrupt() 2020-11-05 16:32:39 -08:00
cortina.c net: mdiobus: add clause 45 mdiobus accessors 2020-05-26 15:31:45 -07:00
davicom.c net: phy: davicom: remove the use of .ack_interrupt() 2020-11-05 16:32:39 -08:00
dp83tc811.c net: phy: ti: take into account all possible interrupt sources 2021-03-01 11:46:55 -08:00
dp83640.c net: phy: dp83640: use new PTP_MSGTYPE_SYNC define 2020-11-25 12:23:06 -08:00
dp83640_reg.h
dp83822.c net: phy: ti: take into account all possible interrupt sources 2021-03-01 11:46:55 -08:00
dp83848.c net: phy: ti: remove the use of .ack_interrupt() 2020-11-25 11:18:38 -08:00
dp83867.c net: phy: ti: remove the use of .ack_interrupt() 2020-11-25 11:18:38 -08:00
dp83869.c net: phy: introduce phydev->port 2021-02-11 13:09:58 -08:00
et1011c.c
fixed_phy.c treewide: Use fallthrough pseudo-keyword 2020-08-23 17:36:59 -05:00
icplus.c net: phy: icplus: call phy_restore_page() when phy_select_page() fails 2021-02-22 18:47:48 -08:00
intel-xway.c net: phy: intel-xway: remove the use of .ack_interrupt() 2020-11-25 11:18:37 -08:00
Kconfig mdio: fix mdio-thunder.c dependency & build error 2020-09-27 13:21:28 -07:00
linkmode.c
lxt.c net: phy: introduce phydev->port 2021-02-11 13:09:58 -08:00
Makefile net: phy: Sort Kconfig and Makefile 2020-08-27 06:55:51 -07:00
marvell.c net: phy: marvell: Ensure SGMII auto-negotiation is enabled for 88E1111 2021-02-16 14:16:58 -08:00
marvell10g.c net: phy: introduce phydev->port 2021-02-11 13:09:58 -08:00
mdio-boardinfo.c net: phy: Fixup parameters in kerneldoc 2020-07-07 12:47:10 -07:00
mdio-boardinfo.h
mdio_bus.c net: mdiobus: Prevent spike on MDIO bus reset signal 2021-02-03 17:28:05 -08:00
mdio_device.c net: mdio device: use flexible sleeping in reset function 2020-08-03 15:01:02 -07:00
mdio_devres.c of: mdio: provide devm_of_mdiobus_register() 2020-06-30 15:57:34 -07:00
meson-gxl.c net: phy: meson-gxl: remove the use of .ack_callback() 2020-11-25 11:18:37 -08:00
micrel.c net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081 2021-02-25 09:51:31 -08:00
microchip.c net: phy: microchip: remove the use of .ack_interrupt() 2020-11-17 11:36:59 -08:00
microchip_t1.c net: phy: microchip: remove the use of .ack_interrupt() 2020-11-17 11:36:59 -08:00
mii_timestamper.c
national.c net: phy: national: remove definition of DEBUG 2021-01-18 20:03:01 -08:00
nxp-tja11xx.c net: phy: nxp-tja11xx: remove the use of .ack_interrupt() 2020-11-17 11:37:00 -08:00
phy-c45.c net: phy: fix kernel-doc markups 2020-11-17 14:15:03 -08:00
phy-core.c net: phy: Document core PHY structures 2020-09-23 18:02:49 -07:00
phy.c net: phy: fix save wrong speed and duplex problem if autoneg is on 2021-03-01 13:16:16 -08:00
phy_device.c net: phy: make mdio_bus_phy_suspend/resume as __maybe_unused 2021-02-26 15:43:25 -08:00
phy_led_triggers.c net: phy: leds: Deduplicate link LED trigger registration 2020-10-30 10:43:37 -07:00
phylink.c net: phylink: Add 5gbase-r support 2021-02-16 14:15:12 -08:00
qsemi.c net: phy: qsemi: remove the use of .ack_interrupt() 2020-11-25 11:18:38 -08:00
realtek.c net: phy: realtek: Add support for RTL9000AA/AN 2021-01-22 18:06:42 -08:00
rockchip.c
sfp-bus.c sfp: add support for 5gbase-t SFPs 2021-02-16 14:15:12 -08:00
sfp.c net: sfp: add mode quirk for GPON module Ubiquiti U-Fiber Instant 2021-01-28 13:41:17 -08:00
sfp.h
smsc.c net: phy: smsc: fix clk error handling 2021-01-12 18:39:19 -08:00
spi_ks8995.c net: Use kobj_to_dev() API 2020-09-28 15:14:42 -07:00
ste10Xp.c net: phy: ste10Xp: remove the use of .ack_interrupt() 2020-11-17 11:37:00 -08:00
swphy.c
swphy.h
teranetics.c net: phy: remove genphy_no_soft_reset 2020-04-24 16:47:51 -07:00
uPD60620.c
vitesse.c net: phy: vitesse: remove the use of .ack_interrupt() 2020-11-17 11:36:59 -08:00
xilinx_gmii2rgmii.c