mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 18:09:57 +00:00
![Codrin Ciubotariu](/assets/img/avatar_default.png)
Starting with
commit 75820314de
("i2c: core: add generic I2C GPIO recovery")
GPIO bus recovery is supported by the I2C core, so we can remove the
driver implementation and use that one instead.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
1553 lines
37 KiB
C
1553 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* i2c_adap_pxa.c
|
|
*
|
|
* I2C adapter for the PXA I2C bus access.
|
|
*
|
|
* Copyright (C) 2002 Intrinsyc Software Inc.
|
|
* Copyright (C) 2004-2005 Deep Blue Solutions Ltd.
|
|
*
|
|
* History:
|
|
* Apr 2002: Initial version [CS]
|
|
* Jun 2002: Properly separated algo/adap [FB]
|
|
* Jan 2003: Fixed several bugs concerning interrupt handling [Kai-Uwe Bloem]
|
|
* Jan 2003: added limited signal handling [Kai-Uwe Bloem]
|
|
* Sep 2004: Major rework to ensure efficient bus handling [RMK]
|
|
* Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood]
|
|
* Feb 2005: Rework slave mode handling [RMK]
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* I2C register field definitions */
|
|
#define IBMR_SDAS (1 << 0)
|
|
#define IBMR_SCLS (1 << 1)
|
|
|
|
#define ICR_START (1 << 0) /* start bit */
|
|
#define ICR_STOP (1 << 1) /* stop bit */
|
|
#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
|
|
#define ICR_TB (1 << 3) /* transfer byte bit */
|
|
#define ICR_MA (1 << 4) /* master abort */
|
|
#define ICR_SCLE (1 << 5) /* master clock enable */
|
|
#define ICR_IUE (1 << 6) /* unit enable */
|
|
#define ICR_GCD (1 << 7) /* general call disable */
|
|
#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
|
|
#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
|
|
#define ICR_BEIE (1 << 10) /* enable bus error ints */
|
|
#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
|
|
#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
|
|
#define ICR_SADIE (1 << 13) /* slave address detected int enable */
|
|
#define ICR_UR (1 << 14) /* unit reset */
|
|
#define ICR_FM (1 << 15) /* fast mode */
|
|
#define ICR_HS (1 << 16) /* High Speed mode */
|
|
#define ICR_A3700_FM (1 << 16) /* fast mode for armada-3700 */
|
|
#define ICR_A3700_HS (1 << 17) /* high speed mode for armada-3700 */
|
|
#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */
|
|
|
|
#define ISR_RWM (1 << 0) /* read/write mode */
|
|
#define ISR_ACKNAK (1 << 1) /* ack/nak status */
|
|
#define ISR_UB (1 << 2) /* unit busy */
|
|
#define ISR_IBB (1 << 3) /* bus busy */
|
|
#define ISR_SSD (1 << 4) /* slave stop detected */
|
|
#define ISR_ALD (1 << 5) /* arbitration loss detected */
|
|
#define ISR_ITE (1 << 6) /* tx buffer empty */
|
|
#define ISR_IRF (1 << 7) /* rx buffer full */
|
|
#define ISR_GCAD (1 << 8) /* general call address detected */
|
|
#define ISR_SAD (1 << 9) /* slave address detected */
|
|
#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
|
|
|
|
#define ILCR_SLV_SHIFT 0
|
|
#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT)
|
|
#define ILCR_FLV_SHIFT 9
|
|
#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT)
|
|
#define ILCR_HLVL_SHIFT 18
|
|
#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT)
|
|
#define ILCR_HLVH_SHIFT 27
|
|
#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT)
|
|
|
|
#define IWCR_CNT_SHIFT 0
|
|
#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT)
|
|
#define IWCR_HS_CNT1_SHIFT 5
|
|
#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT)
|
|
#define IWCR_HS_CNT2_SHIFT 10
|
|
#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT)
|
|
|
|
/* need a longer timeout if we're dealing with the fact we may well be
|
|
* looking at a multi-master environment
|
|
*/
|
|
#define DEF_TIMEOUT 32
|
|
|
|
#define NO_SLAVE (-ENXIO)
|
|
#define BUS_ERROR (-EREMOTEIO)
|
|
#define XFER_NAKED (-ECONNREFUSED)
|
|
#define I2C_RETRY (-2000) /* an error has occurred retry transmit */
|
|
|
|
/* ICR initialize bit values
|
|
*
|
|
* 15 FM 0 (100 kHz operation)
|
|
* 14 UR 0 (No unit reset)
|
|
* 13 SADIE 0 (Disables the unit from interrupting on slave addresses
|
|
* matching its slave address)
|
|
* 12 ALDIE 0 (Disables the unit from interrupt when it loses arbitration
|
|
* in master mode)
|
|
* 11 SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode)
|
|
* 10 BEIE 1 (Enable interrupts from detected bus errors, no ACK sent)
|
|
* 9 IRFIE 1 (Enable interrupts from full buffer received)
|
|
* 8 ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty)
|
|
* 7 GCD 1 (Disables i2c unit response to general call messages as a slave)
|
|
* 6 IUE 0 (Disable unit until we change settings)
|
|
* 5 SCLE 1 (Enables the i2c clock output for master mode (drives SCL)
|
|
* 4 MA 0 (Only send stop with the ICR stop bit)
|
|
* 3 TB 0 (We are not transmitting a byte initially)
|
|
* 2 ACKNAK 0 (Send an ACK after the unit receives a byte)
|
|
* 1 STOP 0 (Do not send a STOP)
|
|
* 0 START 0 (Do not send a START)
|
|
*/
|
|
#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
|
|
|
|
/* I2C status register init values
|
|
*
|
|
* 10 BED 1 (Clear bus error detected)
|
|
* 9 SAD 1 (Clear slave address detected)
|
|
* 7 IRF 1 (Clear IDBR Receive Full)
|
|
* 6 ITE 1 (Clear IDBR Transmit Empty)
|
|
* 5 ALD 1 (Clear Arbitration Loss Detected)
|
|
* 4 SSD 1 (Clear Slave Stop Detected)
|
|
*/
|
|
#define I2C_ISR_INIT 0x7FF /* status register init */
|
|
|
|
struct pxa_reg_layout {
|
|
u32 ibmr;
|
|
u32 idbr;
|
|
u32 icr;
|
|
u32 isr;
|
|
u32 isar;
|
|
u32 ilcr;
|
|
u32 iwcr;
|
|
u32 fm;
|
|
u32 hs;
|
|
};
|
|
|
|
enum pxa_i2c_types {
|
|
REGS_PXA2XX,
|
|
REGS_PXA3XX,
|
|
REGS_CE4100,
|
|
REGS_PXA910,
|
|
REGS_A3700,
|
|
};
|
|
|
|
/* I2C register layout definitions */
|
|
static struct pxa_reg_layout pxa_reg_layout[] = {
|
|
[REGS_PXA2XX] = {
|
|
.ibmr = 0x00,
|
|
.idbr = 0x08,
|
|
.icr = 0x10,
|
|
.isr = 0x18,
|
|
.isar = 0x20,
|
|
.fm = ICR_FM,
|
|
.hs = ICR_HS,
|
|
},
|
|
[REGS_PXA3XX] = {
|
|
.ibmr = 0x00,
|
|
.idbr = 0x04,
|
|
.icr = 0x08,
|
|
.isr = 0x0c,
|
|
.isar = 0x10,
|
|
.fm = ICR_FM,
|
|
.hs = ICR_HS,
|
|
},
|
|
[REGS_CE4100] = {
|
|
.ibmr = 0x14,
|
|
.idbr = 0x0c,
|
|
.icr = 0x00,
|
|
.isr = 0x04,
|
|
/* no isar register */
|
|
.fm = ICR_FM,
|
|
.hs = ICR_HS,
|
|
},
|
|
[REGS_PXA910] = {
|
|
.ibmr = 0x00,
|
|
.idbr = 0x08,
|
|
.icr = 0x10,
|
|
.isr = 0x18,
|
|
.isar = 0x20,
|
|
.ilcr = 0x28,
|
|
.iwcr = 0x30,
|
|
.fm = ICR_FM,
|
|
.hs = ICR_HS,
|
|
},
|
|
[REGS_A3700] = {
|
|
.ibmr = 0x00,
|
|
.idbr = 0x04,
|
|
.icr = 0x08,
|
|
.isr = 0x0c,
|
|
.isar = 0x10,
|
|
.fm = ICR_A3700_FM,
|
|
.hs = ICR_A3700_HS,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id i2c_pxa_dt_ids[] = {
|
|
{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
|
|
{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
|
|
{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
|
|
{ .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
|
|
|
|
static const struct platform_device_id i2c_pxa_id_table[] = {
|
|
{ "pxa2xx-i2c", REGS_PXA2XX },
|
|
{ "pxa3xx-pwri2c", REGS_PXA3XX },
|
|
{ "ce4100-i2c", REGS_CE4100 },
|
|
{ "pxa910-i2c", REGS_PXA910 },
|
|
{ "armada-3700-i2c", REGS_A3700 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
|
|
|
|
struct pxa_i2c {
|
|
spinlock_t lock;
|
|
wait_queue_head_t wait;
|
|
struct i2c_msg *msg;
|
|
unsigned int msg_num;
|
|
unsigned int msg_idx;
|
|
unsigned int msg_ptr;
|
|
unsigned int slave_addr;
|
|
unsigned int req_slave_addr;
|
|
|
|
struct i2c_adapter adap;
|
|
struct clk *clk;
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
struct i2c_client *slave;
|
|
#endif
|
|
|
|
unsigned int irqlogidx;
|
|
u32 isrlog[32];
|
|
u32 icrlog[32];
|
|
|
|
void __iomem *reg_base;
|
|
void __iomem *reg_ibmr;
|
|
void __iomem *reg_idbr;
|
|
void __iomem *reg_icr;
|
|
void __iomem *reg_isr;
|
|
void __iomem *reg_isar;
|
|
void __iomem *reg_ilcr;
|
|
void __iomem *reg_iwcr;
|
|
|
|
unsigned long iobase;
|
|
unsigned long iosize;
|
|
|
|
int irq;
|
|
unsigned int use_pio :1;
|
|
unsigned int fast_mode :1;
|
|
unsigned int high_mode:1;
|
|
unsigned char master_code;
|
|
unsigned long rate;
|
|
bool highmode_enter;
|
|
u32 fm_mask;
|
|
u32 hs_mask;
|
|
|
|
struct i2c_bus_recovery_info recovery;
|
|
};
|
|
|
|
#define _IBMR(i2c) ((i2c)->reg_ibmr)
|
|
#define _IDBR(i2c) ((i2c)->reg_idbr)
|
|
#define _ICR(i2c) ((i2c)->reg_icr)
|
|
#define _ISR(i2c) ((i2c)->reg_isr)
|
|
#define _ISAR(i2c) ((i2c)->reg_isar)
|
|
#define _ILCR(i2c) ((i2c)->reg_ilcr)
|
|
#define _IWCR(i2c) ((i2c)->reg_iwcr)
|
|
|
|
/*
|
|
* I2C Slave mode address
|
|
*/
|
|
#define I2C_PXA_SLAVE_ADDR 0x1
|
|
|
|
#ifdef DEBUG
|
|
|
|
struct bits {
|
|
u32 mask;
|
|
const char *set;
|
|
const char *unset;
|
|
};
|
|
#define PXA_BIT(m, s, u) { .mask = m, .set = s, .unset = u }
|
|
|
|
static inline void
|
|
decode_bits(const char *prefix, const struct bits *bits, int num, u32 val)
|
|
{
|
|
printk("%s %08x:", prefix, val);
|
|
while (num--) {
|
|
const char *str = val & bits->mask ? bits->set : bits->unset;
|
|
if (str)
|
|
pr_cont(" %s", str);
|
|
bits++;
|
|
}
|
|
pr_cont("\n");
|
|
}
|
|
|
|
static const struct bits isr_bits[] = {
|
|
PXA_BIT(ISR_RWM, "RX", "TX"),
|
|
PXA_BIT(ISR_ACKNAK, "NAK", "ACK"),
|
|
PXA_BIT(ISR_UB, "Bsy", "Rdy"),
|
|
PXA_BIT(ISR_IBB, "BusBsy", "BusRdy"),
|
|
PXA_BIT(ISR_SSD, "SlaveStop", NULL),
|
|
PXA_BIT(ISR_ALD, "ALD", NULL),
|
|
PXA_BIT(ISR_ITE, "TxEmpty", NULL),
|
|
PXA_BIT(ISR_IRF, "RxFull", NULL),
|
|
PXA_BIT(ISR_GCAD, "GenCall", NULL),
|
|
PXA_BIT(ISR_SAD, "SlaveAddr", NULL),
|
|
PXA_BIT(ISR_BED, "BusErr", NULL),
|
|
};
|
|
|
|
static void decode_ISR(unsigned int val)
|
|
{
|
|
decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val);
|
|
}
|
|
|
|
static const struct bits icr_bits[] = {
|
|
PXA_BIT(ICR_START, "START", NULL),
|
|
PXA_BIT(ICR_STOP, "STOP", NULL),
|
|
PXA_BIT(ICR_ACKNAK, "ACKNAK", NULL),
|
|
PXA_BIT(ICR_TB, "TB", NULL),
|
|
PXA_BIT(ICR_MA, "MA", NULL),
|
|
PXA_BIT(ICR_SCLE, "SCLE", "scle"),
|
|
PXA_BIT(ICR_IUE, "IUE", "iue"),
|
|
PXA_BIT(ICR_GCD, "GCD", NULL),
|
|
PXA_BIT(ICR_ITEIE, "ITEIE", NULL),
|
|
PXA_BIT(ICR_IRFIE, "IRFIE", NULL),
|
|
PXA_BIT(ICR_BEIE, "BEIE", NULL),
|
|
PXA_BIT(ICR_SSDIE, "SSDIE", NULL),
|
|
PXA_BIT(ICR_ALDIE, "ALDIE", NULL),
|
|
PXA_BIT(ICR_SADIE, "SADIE", NULL),
|
|
PXA_BIT(ICR_UR, "UR", "ur"),
|
|
};
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
static void decode_ICR(unsigned int val)
|
|
{
|
|
decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val);
|
|
}
|
|
#endif
|
|
|
|
static unsigned int i2c_debug = DEBUG;
|
|
|
|
static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
|
|
{
|
|
dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno,
|
|
readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
|
|
}
|
|
|
|
#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __func__)
|
|
|
|
static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why)
|
|
{
|
|
unsigned int i;
|
|
struct device *dev = &i2c->adap.dev;
|
|
|
|
dev_err(dev, "slave_0x%x error: %s\n",
|
|
i2c->req_slave_addr >> 1, why);
|
|
dev_err(dev, "msg_num: %d msg_idx: %d msg_ptr: %d\n",
|
|
i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
|
|
dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n",
|
|
readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)),
|
|
readl(_ISR(i2c)));
|
|
dev_err(dev, "log:");
|
|
for (i = 0; i < i2c->irqlogidx; i++)
|
|
pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]);
|
|
pr_cont("\n");
|
|
}
|
|
|
|
#else /* ifdef DEBUG */
|
|
|
|
#define i2c_debug 0
|
|
|
|
#define show_state(i2c) do { } while (0)
|
|
#define decode_ISR(val) do { } while (0)
|
|
#define decode_ICR(val) do { } while (0)
|
|
#define i2c_pxa_scream_blue_murder(i2c, why) do { } while (0)
|
|
|
|
#endif /* ifdef DEBUG / else */
|
|
|
|
static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret);
|
|
|
|
static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
|
|
{
|
|
return !(readl(_ICR(i2c)) & ICR_SCLE);
|
|
}
|
|
|
|
static void i2c_pxa_abort(struct pxa_i2c *i2c)
|
|
{
|
|
int i = 250;
|
|
|
|
if (i2c_pxa_is_slavemode(i2c)) {
|
|
dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
|
|
return;
|
|
}
|
|
|
|
while ((i > 0) && (readl(_IBMR(i2c)) & IBMR_SDAS) == 0) {
|
|
unsigned long icr = readl(_ICR(i2c));
|
|
|
|
icr &= ~ICR_START;
|
|
icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
|
|
|
|
writel(icr, _ICR(i2c));
|
|
|
|
show_state(i2c);
|
|
|
|
mdelay(1);
|
|
i --;
|
|
}
|
|
|
|
writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
|
|
_ICR(i2c));
|
|
}
|
|
|
|
static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
|
|
{
|
|
int timeout = DEF_TIMEOUT;
|
|
u32 isr;
|
|
|
|
while (1) {
|
|
isr = readl(_ISR(i2c));
|
|
if (!(isr & (ISR_IBB | ISR_UB)))
|
|
return 0;
|
|
|
|
if (isr & ISR_SAD)
|
|
timeout += 4;
|
|
|
|
if (!timeout--)
|
|
break;
|
|
|
|
msleep(2);
|
|
show_state(i2c);
|
|
}
|
|
|
|
show_state(i2c);
|
|
|
|
return I2C_RETRY;
|
|
}
|
|
|
|
static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
|
|
{
|
|
unsigned long timeout = jiffies + HZ*4;
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
if (i2c_debug > 1)
|
|
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
|
|
__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
|
|
|
|
if (readl(_ISR(i2c)) & ISR_SAD) {
|
|
if (i2c_debug > 0)
|
|
dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
/* wait for unit and bus being not busy, and we also do a
|
|
* quick check of the i2c lines themselves to ensure they've
|
|
* gone high...
|
|
*/
|
|
if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 &&
|
|
readl(_IBMR(i2c)) == (IBMR_SCLS | IBMR_SDAS)) {
|
|
if (i2c_debug > 0)
|
|
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
if (i2c_debug > 0)
|
|
dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__);
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_pxa_set_master(struct pxa_i2c *i2c)
|
|
{
|
|
if (i2c_debug)
|
|
dev_dbg(&i2c->adap.dev, "setting to bus master\n");
|
|
|
|
if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) {
|
|
dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__);
|
|
if (!i2c_pxa_wait_master(i2c)) {
|
|
dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__);
|
|
return I2C_RETRY;
|
|
}
|
|
}
|
|
|
|
writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
static int i2c_pxa_wait_slave(struct pxa_i2c *i2c)
|
|
{
|
|
unsigned long timeout = jiffies + HZ*1;
|
|
|
|
/* wait for stop */
|
|
|
|
show_state(i2c);
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
if (i2c_debug > 1)
|
|
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
|
|
__func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
|
|
|
|
if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 ||
|
|
(readl(_ISR(i2c)) & ISR_SAD) != 0 ||
|
|
(readl(_ICR(i2c)) & ICR_SCLE) == 0) {
|
|
if (i2c_debug > 1)
|
|
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
msleep(1);
|
|
}
|
|
|
|
if (i2c_debug > 0)
|
|
dev_dbg(&i2c->adap.dev, "%s: did not free\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* clear the hold on the bus, and take of anything else
|
|
* that has been configured
|
|
*/
|
|
static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode)
|
|
{
|
|
show_state(i2c);
|
|
|
|
if (errcode < 0) {
|
|
udelay(100); /* simple delay */
|
|
} else {
|
|
/* we need to wait for the stop condition to end */
|
|
|
|
/* if we where in stop, then clear... */
|
|
if (readl(_ICR(i2c)) & ICR_STOP) {
|
|
udelay(100);
|
|
writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c));
|
|
}
|
|
|
|
if (!i2c_pxa_wait_slave(i2c)) {
|
|
dev_err(&i2c->adap.dev, "%s: wait timedout\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
}
|
|
|
|
writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c));
|
|
writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
|
|
|
|
if (i2c_debug) {
|
|
dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c)));
|
|
decode_ICR(readl(_ICR(i2c)));
|
|
}
|
|
}
|
|
#else
|
|
#define i2c_pxa_set_slave(i2c, err) do { } while (0)
|
|
#endif
|
|
|
|
static void i2c_pxa_do_reset(struct pxa_i2c *i2c)
|
|
{
|
|
/* reset according to 9.8 */
|
|
writel(ICR_UR, _ICR(i2c));
|
|
writel(I2C_ISR_INIT, _ISR(i2c));
|
|
writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
|
|
|
|
if (i2c->reg_isar && IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
|
|
writel(i2c->slave_addr, _ISAR(i2c));
|
|
|
|
/* set control register values */
|
|
writel(I2C_ICR_INIT | (i2c->fast_mode ? i2c->fm_mask : 0), _ICR(i2c));
|
|
writel(readl(_ICR(i2c)) | (i2c->high_mode ? i2c->hs_mask : 0), _ICR(i2c));
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
|
|
writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
|
|
#endif
|
|
|
|
i2c_pxa_set_slave(i2c, 0);
|
|
}
|
|
|
|
static void i2c_pxa_enable(struct pxa_i2c *i2c)
|
|
{
|
|
/* enable unit */
|
|
writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
|
|
udelay(100);
|
|
}
|
|
|
|
static void i2c_pxa_reset(struct pxa_i2c *i2c)
|
|
{
|
|
pr_debug("Resetting I2C Controller Unit\n");
|
|
|
|
/* abort any transfer currently under way */
|
|
i2c_pxa_abort(i2c);
|
|
i2c_pxa_do_reset(i2c);
|
|
i2c_pxa_enable(i2c);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
/*
|
|
* PXA I2C Slave mode
|
|
*/
|
|
|
|
static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
if (isr & ISR_BED) {
|
|
/* what should we do here? */
|
|
} else {
|
|
u8 byte = 0;
|
|
|
|
if (i2c->slave != NULL)
|
|
i2c_slave_event(i2c->slave, I2C_SLAVE_READ_PROCESSED,
|
|
&byte);
|
|
|
|
writel(byte, _IDBR(i2c));
|
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */
|
|
}
|
|
}
|
|
|
|
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
u8 byte = readl(_IDBR(i2c));
|
|
|
|
if (i2c->slave != NULL)
|
|
i2c_slave_event(i2c->slave, I2C_SLAVE_WRITE_RECEIVED, &byte);
|
|
|
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
|
|
}
|
|
|
|
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
int timeout;
|
|
|
|
if (i2c_debug > 0)
|
|
dev_dbg(&i2c->adap.dev, "SAD, mode is slave-%cx\n",
|
|
(isr & ISR_RWM) ? 'r' : 't');
|
|
|
|
if (i2c->slave != NULL) {
|
|
if (isr & ISR_RWM) {
|
|
u8 byte = 0;
|
|
|
|
i2c_slave_event(i2c->slave, I2C_SLAVE_READ_REQUESTED,
|
|
&byte);
|
|
writel(byte, _IDBR(i2c));
|
|
} else {
|
|
i2c_slave_event(i2c->slave, I2C_SLAVE_WRITE_REQUESTED,
|
|
NULL);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* slave could interrupt in the middle of us generating a
|
|
* start condition... if this happens, we'd better back off
|
|
* and stop holding the poor thing up
|
|
*/
|
|
writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
|
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
|
|
|
|
timeout = 0x10000;
|
|
|
|
while (1) {
|
|
if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
|
|
break;
|
|
|
|
timeout--;
|
|
|
|
if (timeout <= 0) {
|
|
dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
|
|
}
|
|
|
|
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
|
|
{
|
|
if (i2c_debug > 2)
|
|
dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop)\n");
|
|
|
|
if (i2c->slave != NULL)
|
|
i2c_slave_event(i2c->slave, I2C_SLAVE_STOP, NULL);
|
|
|
|
if (i2c_debug > 2)
|
|
dev_dbg(&i2c->adap.dev, "ISR: SSD (Slave Stop) acked\n");
|
|
|
|
/*
|
|
* If we have a master-mode message waiting,
|
|
* kick it off now that the slave has completed.
|
|
*/
|
|
if (i2c->msg)
|
|
i2c_pxa_master_complete(i2c, I2C_RETRY);
|
|
}
|
|
|
|
static int i2c_pxa_slave_reg(struct i2c_client *slave)
|
|
{
|
|
struct pxa_i2c *i2c = slave->adapter->algo_data;
|
|
|
|
if (i2c->slave)
|
|
return -EBUSY;
|
|
|
|
if (!i2c->reg_isar)
|
|
return -EAFNOSUPPORT;
|
|
|
|
i2c->slave = slave;
|
|
i2c->slave_addr = slave->addr;
|
|
|
|
writel(i2c->slave_addr, _ISAR(i2c));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_pxa_slave_unreg(struct i2c_client *slave)
|
|
{
|
|
struct pxa_i2c *i2c = slave->adapter->algo_data;
|
|
|
|
WARN_ON(!i2c->slave);
|
|
|
|
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
|
|
writel(i2c->slave_addr, _ISAR(i2c));
|
|
|
|
i2c->slave = NULL;
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static void i2c_pxa_slave_txempty(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
if (isr & ISR_BED) {
|
|
/* what should we do here? */
|
|
} else {
|
|
writel(0, _IDBR(i2c));
|
|
writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
|
|
}
|
|
}
|
|
|
|
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
|
|
}
|
|
|
|
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
int timeout;
|
|
|
|
/*
|
|
* slave could interrupt in the middle of us generating a
|
|
* start condition... if this happens, we'd better back off
|
|
* and stop holding the poor thing up
|
|
*/
|
|
writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
|
|
writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
|
|
|
|
timeout = 0x10000;
|
|
|
|
while (1) {
|
|
if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS)
|
|
break;
|
|
|
|
timeout--;
|
|
|
|
if (timeout <= 0) {
|
|
dev_err(&i2c->adap.dev, "timeout waiting for SCL high\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
|
|
}
|
|
|
|
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
|
|
{
|
|
if (i2c->msg)
|
|
i2c_pxa_master_complete(i2c, I2C_RETRY);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* PXA I2C Master mode
|
|
*/
|
|
|
|
static inline void i2c_pxa_start_message(struct pxa_i2c *i2c)
|
|
{
|
|
u32 icr;
|
|
|
|
/*
|
|
* Step 1: target slave address into IDBR
|
|
*/
|
|
i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
|
|
writel(i2c->req_slave_addr, _IDBR(i2c));
|
|
|
|
/*
|
|
* Step 2: initiate the write.
|
|
*/
|
|
icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
|
|
writel(icr | ICR_START | ICR_TB, _ICR(i2c));
|
|
}
|
|
|
|
static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c)
|
|
{
|
|
u32 icr;
|
|
|
|
/* Clear the START, STOP, ACK, TB and MA flags */
|
|
icr = readl(_ICR(i2c));
|
|
icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA);
|
|
writel(icr, _ICR(i2c));
|
|
}
|
|
|
|
/*
|
|
* PXA I2C send master code
|
|
* 1. Load master code to IDBR and send it.
|
|
* Note for HS mode, set ICR [GPIOEN].
|
|
* 2. Wait until win arbitration.
|
|
*/
|
|
static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
|
|
{
|
|
u32 icr;
|
|
long timeout;
|
|
|
|
spin_lock_irq(&i2c->lock);
|
|
i2c->highmode_enter = true;
|
|
writel(i2c->master_code, _IDBR(i2c));
|
|
|
|
icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
|
|
icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE;
|
|
writel(icr, _ICR(i2c));
|
|
|
|
spin_unlock_irq(&i2c->lock);
|
|
timeout = wait_event_timeout(i2c->wait,
|
|
i2c->highmode_enter == false, HZ * 1);
|
|
|
|
i2c->highmode_enter = false;
|
|
|
|
return (timeout == 0) ? I2C_RETRY : 0;
|
|
}
|
|
|
|
/*
|
|
* i2c_pxa_master_complete - complete the message and wake up.
|
|
*/
|
|
static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret)
|
|
{
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg = NULL;
|
|
i2c->msg_idx ++;
|
|
i2c->msg_num = 0;
|
|
if (ret)
|
|
i2c->msg_idx = ret;
|
|
if (!i2c->use_pio)
|
|
wake_up(&i2c->wait);
|
|
}
|
|
|
|
static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
|
|
|
|
again:
|
|
/*
|
|
* If ISR_ALD is set, we lost arbitration.
|
|
*/
|
|
if (isr & ISR_ALD) {
|
|
/*
|
|
* Do we need to do anything here? The PXA docs
|
|
* are vague about what happens.
|
|
*/
|
|
i2c_pxa_scream_blue_murder(i2c, "ALD set");
|
|
|
|
/*
|
|
* We ignore this error. We seem to see spurious ALDs
|
|
* for seemingly no reason. If we handle them as I think
|
|
* they should, we end up causing an I2C error, which
|
|
* is painful for some systems.
|
|
*/
|
|
return; /* ignore */
|
|
}
|
|
|
|
if ((isr & ISR_BED) &&
|
|
(!((i2c->msg->flags & I2C_M_IGNORE_NAK) &&
|
|
(isr & ISR_ACKNAK)))) {
|
|
int ret = BUS_ERROR;
|
|
|
|
/*
|
|
* I2C bus error - either the device NAK'd us, or
|
|
* something more serious happened. If we were NAK'd
|
|
* on the initial address phase, we can retry.
|
|
*/
|
|
if (isr & ISR_ACKNAK) {
|
|
if (i2c->msg_ptr == 0 && i2c->msg_idx == 0)
|
|
ret = NO_SLAVE;
|
|
else
|
|
ret = XFER_NAKED;
|
|
}
|
|
i2c_pxa_master_complete(i2c, ret);
|
|
} else if (isr & ISR_RWM) {
|
|
/*
|
|
* Read mode. We have just sent the address byte, and
|
|
* now we must initiate the transfer.
|
|
*/
|
|
if (i2c->msg_ptr == i2c->msg->len - 1 &&
|
|
i2c->msg_idx == i2c->msg_num - 1)
|
|
icr |= ICR_STOP | ICR_ACKNAK;
|
|
|
|
icr |= ICR_ALDIE | ICR_TB;
|
|
} else if (i2c->msg_ptr < i2c->msg->len) {
|
|
/*
|
|
* Write mode. Write the next data byte.
|
|
*/
|
|
writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c));
|
|
|
|
icr |= ICR_ALDIE | ICR_TB;
|
|
|
|
/*
|
|
* If this is the last byte of the last message or last byte
|
|
* of any message with I2C_M_STOP (e.g. SCCB), send a STOP.
|
|
*/
|
|
if ((i2c->msg_ptr == i2c->msg->len) &&
|
|
((i2c->msg->flags & I2C_M_STOP) ||
|
|
(i2c->msg_idx == i2c->msg_num - 1)))
|
|
icr |= ICR_STOP;
|
|
|
|
} else if (i2c->msg_idx < i2c->msg_num - 1) {
|
|
/*
|
|
* Next segment of the message.
|
|
*/
|
|
i2c->msg_ptr = 0;
|
|
i2c->msg_idx ++;
|
|
i2c->msg++;
|
|
|
|
/*
|
|
* If we aren't doing a repeated start and address,
|
|
* go back and try to send the next byte. Note that
|
|
* we do not support switching the R/W direction here.
|
|
*/
|
|
if (i2c->msg->flags & I2C_M_NOSTART)
|
|
goto again;
|
|
|
|
/*
|
|
* Write the next address.
|
|
*/
|
|
i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg);
|
|
writel(i2c->req_slave_addr, _IDBR(i2c));
|
|
|
|
/*
|
|
* And trigger a repeated start, and send the byte.
|
|
*/
|
|
icr &= ~ICR_ALDIE;
|
|
icr |= ICR_START | ICR_TB;
|
|
} else {
|
|
if (i2c->msg->len == 0)
|
|
icr |= ICR_MA;
|
|
i2c_pxa_master_complete(i2c, 0);
|
|
}
|
|
|
|
i2c->icrlog[i2c->irqlogidx-1] = icr;
|
|
|
|
writel(icr, _ICR(i2c));
|
|
show_state(i2c);
|
|
}
|
|
|
|
static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
|
|
{
|
|
u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
|
|
|
|
/*
|
|
* Read the byte.
|
|
*/
|
|
i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c));
|
|
|
|
if (i2c->msg_ptr < i2c->msg->len) {
|
|
/*
|
|
* If this is the last byte of the last
|
|
* message, send a STOP.
|
|
*/
|
|
if (i2c->msg_ptr == i2c->msg->len - 1)
|
|
icr |= ICR_STOP | ICR_ACKNAK;
|
|
|
|
icr |= ICR_ALDIE | ICR_TB;
|
|
} else {
|
|
i2c_pxa_master_complete(i2c, 0);
|
|
}
|
|
|
|
i2c->icrlog[i2c->irqlogidx-1] = icr;
|
|
|
|
writel(icr, _ICR(i2c));
|
|
}
|
|
|
|
#define VALID_INT_SOURCE (ISR_SSD | ISR_ALD | ISR_ITE | ISR_IRF | \
|
|
ISR_SAD | ISR_BED)
|
|
static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
|
|
{
|
|
struct pxa_i2c *i2c = dev_id;
|
|
u32 isr = readl(_ISR(i2c));
|
|
|
|
if (!(isr & VALID_INT_SOURCE))
|
|
return IRQ_NONE;
|
|
|
|
if (i2c_debug > 2 && 0) {
|
|
dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
|
|
__func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
|
|
decode_ISR(isr);
|
|
}
|
|
|
|
if (i2c->irqlogidx < ARRAY_SIZE(i2c->isrlog))
|
|
i2c->isrlog[i2c->irqlogidx++] = isr;
|
|
|
|
show_state(i2c);
|
|
|
|
/*
|
|
* Always clear all pending IRQs.
|
|
*/
|
|
writel(isr & VALID_INT_SOURCE, _ISR(i2c));
|
|
|
|
if (isr & ISR_SAD)
|
|
i2c_pxa_slave_start(i2c, isr);
|
|
if (isr & ISR_SSD)
|
|
i2c_pxa_slave_stop(i2c);
|
|
|
|
if (i2c_pxa_is_slavemode(i2c)) {
|
|
if (isr & ISR_ITE)
|
|
i2c_pxa_slave_txempty(i2c, isr);
|
|
if (isr & ISR_IRF)
|
|
i2c_pxa_slave_rxfull(i2c, isr);
|
|
} else if (i2c->msg && (!i2c->highmode_enter)) {
|
|
if (isr & ISR_ITE)
|
|
i2c_pxa_irq_txempty(i2c, isr);
|
|
if (isr & ISR_IRF)
|
|
i2c_pxa_irq_rxfull(i2c, isr);
|
|
} else if ((isr & ISR_ITE) && i2c->highmode_enter) {
|
|
i2c->highmode_enter = false;
|
|
wake_up(&i2c->wait);
|
|
} else {
|
|
i2c_pxa_scream_blue_murder(i2c, "spurious irq");
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* We are protected by the adapter bus mutex.
|
|
*/
|
|
static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
|
|
{
|
|
long timeout;
|
|
int ret;
|
|
|
|
/*
|
|
* Wait for the bus to become free.
|
|
*/
|
|
ret = i2c_pxa_wait_bus_not_busy(i2c);
|
|
if (ret) {
|
|
dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
|
|
i2c_recover_bus(&i2c->adap);
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Set master mode.
|
|
*/
|
|
ret = i2c_pxa_set_master(i2c);
|
|
if (ret) {
|
|
dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
if (i2c->high_mode) {
|
|
ret = i2c_pxa_send_mastercode(i2c);
|
|
if (ret) {
|
|
dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
spin_lock_irq(&i2c->lock);
|
|
|
|
i2c->msg = msg;
|
|
i2c->msg_num = num;
|
|
i2c->msg_idx = 0;
|
|
i2c->msg_ptr = 0;
|
|
i2c->irqlogidx = 0;
|
|
|
|
i2c_pxa_start_message(i2c);
|
|
|
|
spin_unlock_irq(&i2c->lock);
|
|
|
|
/*
|
|
* The rest of the processing occurs in the interrupt handler.
|
|
*/
|
|
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
|
|
i2c_pxa_stop_message(i2c);
|
|
|
|
/*
|
|
* We place the return code in i2c->msg_idx.
|
|
*/
|
|
ret = i2c->msg_idx;
|
|
|
|
if (!timeout && i2c->msg_num) {
|
|
i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
|
|
i2c_recover_bus(&i2c->adap);
|
|
ret = I2C_RETRY;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c,
|
|
struct i2c_msg *msgs, int num,
|
|
int (*xfer)(struct pxa_i2c *,
|
|
struct i2c_msg *, int num))
|
|
{
|
|
int ret, i;
|
|
|
|
for (i = 0; ; ) {
|
|
ret = xfer(i2c, msgs, num);
|
|
if (ret != I2C_RETRY && ret != NO_SLAVE)
|
|
goto out;
|
|
if (++i >= i2c->adap.retries)
|
|
break;
|
|
|
|
if (i2c_debug)
|
|
dev_dbg(&i2c->adap.dev, "Retrying transmission\n");
|
|
udelay(100);
|
|
}
|
|
if (ret != NO_SLAVE)
|
|
i2c_pxa_scream_blue_murder(i2c, "exhausted retries");
|
|
ret = -EREMOTEIO;
|
|
out:
|
|
i2c_pxa_set_slave(i2c, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_pxa_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
struct pxa_i2c *i2c = adap->algo_data;
|
|
|
|
return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_xfer);
|
|
}
|
|
|
|
static u32 i2c_pxa_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
|
|
I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART;
|
|
}
|
|
|
|
static const struct i2c_algorithm i2c_pxa_algorithm = {
|
|
.master_xfer = i2c_pxa_xfer,
|
|
.functionality = i2c_pxa_functionality,
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
.reg_slave = i2c_pxa_slave_reg,
|
|
.unreg_slave = i2c_pxa_slave_unreg,
|
|
#endif
|
|
};
|
|
|
|
/* Non-interrupt mode support */
|
|
static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
|
|
{
|
|
/* make timeout the same as for interrupt based functions */
|
|
long timeout = 2 * DEF_TIMEOUT;
|
|
|
|
/*
|
|
* Wait for the bus to become free.
|
|
*/
|
|
while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB))
|
|
udelay(1000);
|
|
|
|
if (timeout < 0) {
|
|
show_state(i2c);
|
|
dev_err(&i2c->adap.dev,
|
|
"i2c_pxa: timeout waiting for bus free (set_master)\n");
|
|
return I2C_RETRY;
|
|
}
|
|
|
|
/*
|
|
* Set master mode.
|
|
*/
|
|
writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
|
|
struct i2c_msg *msg, int num)
|
|
{
|
|
unsigned long timeout = 500000; /* 5 seconds */
|
|
int ret = 0;
|
|
|
|
ret = i2c_pxa_pio_set_master(i2c);
|
|
if (ret)
|
|
goto out;
|
|
|
|
i2c->msg = msg;
|
|
i2c->msg_num = num;
|
|
i2c->msg_idx = 0;
|
|
i2c->msg_ptr = 0;
|
|
i2c->irqlogidx = 0;
|
|
|
|
i2c_pxa_start_message(i2c);
|
|
|
|
while (i2c->msg_num > 0 && --timeout) {
|
|
i2c_pxa_handler(0, i2c);
|
|
udelay(10);
|
|
}
|
|
|
|
i2c_pxa_stop_message(i2c);
|
|
|
|
/*
|
|
* We place the return code in i2c->msg_idx.
|
|
*/
|
|
ret = i2c->msg_idx;
|
|
|
|
out:
|
|
if (timeout == 0) {
|
|
i2c_pxa_scream_blue_murder(i2c, "timeout (do_pio_xfer)");
|
|
ret = I2C_RETRY;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_pxa_pio_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
struct pxa_i2c *i2c = adap->algo_data;
|
|
|
|
/* If the I2C controller is disabled we need to reset it
|
|
(probably due to a suspend/resume destroying state). We do
|
|
this here as we can then avoid worrying about resuming the
|
|
controller before its users. */
|
|
if (!(readl(_ICR(i2c)) & ICR_IUE))
|
|
i2c_pxa_reset(i2c);
|
|
|
|
return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_pio_xfer);
|
|
}
|
|
|
|
static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
|
|
.master_xfer = i2c_pxa_pio_xfer,
|
|
.functionality = i2c_pxa_functionality,
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
.reg_slave = i2c_pxa_slave_reg,
|
|
.unreg_slave = i2c_pxa_slave_unreg,
|
|
#endif
|
|
};
|
|
|
|
static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c,
|
|
enum pxa_i2c_types *i2c_types)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
const struct of_device_id *of_id =
|
|
of_match_device(i2c_pxa_dt_ids, &pdev->dev);
|
|
|
|
if (!of_id)
|
|
return 1;
|
|
|
|
/* For device tree we always use the dynamic or alias-assigned ID */
|
|
i2c->adap.nr = -1;
|
|
|
|
if (of_get_property(np, "mrvl,i2c-polling", NULL))
|
|
i2c->use_pio = 1;
|
|
if (of_get_property(np, "mrvl,i2c-fast-mode", NULL))
|
|
i2c->fast_mode = 1;
|
|
|
|
*i2c_types = (enum pxa_i2c_types)(of_id->data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_pxa_probe_pdata(struct platform_device *pdev,
|
|
struct pxa_i2c *i2c,
|
|
enum pxa_i2c_types *i2c_types)
|
|
{
|
|
struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev);
|
|
const struct platform_device_id *id = platform_get_device_id(pdev);
|
|
|
|
*i2c_types = id->driver_data;
|
|
if (plat) {
|
|
i2c->use_pio = plat->use_pio;
|
|
i2c->fast_mode = plat->fast_mode;
|
|
i2c->high_mode = plat->high_mode;
|
|
i2c->master_code = plat->master_code;
|
|
if (!i2c->master_code)
|
|
i2c->master_code = 0xe;
|
|
i2c->rate = plat->rate;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap)
|
|
{
|
|
struct pxa_i2c *i2c = adap->algo_data;
|
|
u32 ibmr = readl(_IBMR(i2c));
|
|
|
|
/*
|
|
* Program the GPIOs to reflect the current I2C bus state while
|
|
* we transition to recovery; this avoids glitching the bus.
|
|
*/
|
|
gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS);
|
|
gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS);
|
|
}
|
|
|
|
static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap)
|
|
{
|
|
struct pxa_i2c *i2c = adap->algo_data;
|
|
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
|
|
u32 isr;
|
|
|
|
/*
|
|
* The bus should now be free. Clear up the I2C controller before
|
|
* handing control of the bus back to avoid the bus changing state.
|
|
*/
|
|
isr = readl(_ISR(i2c));
|
|
if (isr & (ISR_UB | ISR_IBB)) {
|
|
dev_dbg(&i2c->adap.dev,
|
|
"recovery: resetting controller, ISR=0x%08x\n", isr);
|
|
i2c_pxa_do_reset(i2c);
|
|
}
|
|
|
|
WARN_ON(pinctrl_select_state(bri->pinctrl, bri->pins_default));
|
|
|
|
dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n",
|
|
readl(_IBMR(i2c)), readl(_ISR(i2c)));
|
|
|
|
i2c_pxa_enable(i2c);
|
|
}
|
|
|
|
static int i2c_pxa_init_recovery(struct pxa_i2c *i2c)
|
|
{
|
|
struct i2c_bus_recovery_info *bri = &i2c->recovery;
|
|
struct device *dev = i2c->adap.dev.parent;
|
|
|
|
/*
|
|
* When slave mode is enabled, we are not the only master on the bus.
|
|
* Bus recovery can only be performed when we are the master, which
|
|
* we can't be certain of. Therefore, when slave mode is enabled, do
|
|
* not configure bus recovery.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
|
|
return 0;
|
|
|
|
bri->pinctrl = devm_pinctrl_get(dev);
|
|
if (PTR_ERR(bri->pinctrl) == -ENODEV) {
|
|
bri->pinctrl = NULL;
|
|
return 0;
|
|
}
|
|
if (IS_ERR(bri->pinctrl))
|
|
return PTR_ERR(bri->pinctrl);
|
|
|
|
bri->prepare_recovery = i2c_pxa_prepare_recovery;
|
|
bri->unprepare_recovery = i2c_pxa_unprepare_recovery;
|
|
|
|
i2c->adap.bus_recovery_info = bri;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_pxa_probe(struct platform_device *dev)
|
|
{
|
|
struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
|
|
enum pxa_i2c_types i2c_type;
|
|
struct pxa_i2c *i2c;
|
|
struct resource *res = NULL;
|
|
int ret, irq;
|
|
|
|
i2c = devm_kzalloc(&dev->dev, sizeof(struct pxa_i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
/* Default adapter num to device id; i2c_pxa_probe_dt can override. */
|
|
i2c->adap.nr = dev->id;
|
|
i2c->adap.owner = THIS_MODULE;
|
|
i2c->adap.retries = 5;
|
|
i2c->adap.algo_data = i2c;
|
|
i2c->adap.dev.parent = &dev->dev;
|
|
#ifdef CONFIG_OF
|
|
i2c->adap.dev.of_node = dev->dev.of_node;
|
|
#endif
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
|
|
if (IS_ERR(i2c->reg_base))
|
|
return PTR_ERR(i2c->reg_base);
|
|
|
|
irq = platform_get_irq(dev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = i2c_pxa_init_recovery(i2c);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
|
|
if (ret > 0)
|
|
ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
spin_lock_init(&i2c->lock);
|
|
init_waitqueue_head(&i2c->wait);
|
|
|
|
strlcpy(i2c->adap.name, "pxa_i2c-i2c", sizeof(i2c->adap.name));
|
|
|
|
i2c->clk = devm_clk_get(&dev->dev, NULL);
|
|
if (IS_ERR(i2c->clk)) {
|
|
dev_err(&dev->dev, "failed to get the clk: %ld\n", PTR_ERR(i2c->clk));
|
|
return PTR_ERR(i2c->clk);
|
|
}
|
|
|
|
i2c->reg_ibmr = i2c->reg_base + pxa_reg_layout[i2c_type].ibmr;
|
|
i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr;
|
|
i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr;
|
|
i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr;
|
|
i2c->fm_mask = pxa_reg_layout[i2c_type].fm;
|
|
i2c->hs_mask = pxa_reg_layout[i2c_type].hs;
|
|
|
|
if (i2c_type != REGS_CE4100)
|
|
i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar;
|
|
|
|
if (i2c_type == REGS_PXA910) {
|
|
i2c->reg_ilcr = i2c->reg_base + pxa_reg_layout[i2c_type].ilcr;
|
|
i2c->reg_iwcr = i2c->reg_base + pxa_reg_layout[i2c_type].iwcr;
|
|
}
|
|
|
|
i2c->iobase = res->start;
|
|
i2c->iosize = resource_size(res);
|
|
|
|
i2c->irq = irq;
|
|
|
|
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
|
|
i2c->highmode_enter = false;
|
|
|
|
if (plat) {
|
|
i2c->adap.class = plat->class;
|
|
}
|
|
|
|
if (i2c->high_mode) {
|
|
if (i2c->rate) {
|
|
clk_set_rate(i2c->clk, i2c->rate);
|
|
pr_info("i2c: <%s> set rate to %ld\n",
|
|
i2c->adap.name, clk_get_rate(i2c->clk));
|
|
} else
|
|
pr_warn("i2c: <%s> clock rate not set\n",
|
|
i2c->adap.name);
|
|
}
|
|
|
|
clk_prepare_enable(i2c->clk);
|
|
|
|
if (i2c->use_pio) {
|
|
i2c->adap.algo = &i2c_pxa_pio_algorithm;
|
|
} else {
|
|
i2c->adap.algo = &i2c_pxa_algorithm;
|
|
ret = devm_request_irq(&dev->dev, irq, i2c_pxa_handler,
|
|
IRQF_SHARED | IRQF_NO_SUSPEND,
|
|
dev_name(&dev->dev), i2c);
|
|
if (ret) {
|
|
dev_err(&dev->dev, "failed to request irq: %d\n", ret);
|
|
goto ereqirq;
|
|
}
|
|
}
|
|
|
|
i2c_pxa_reset(i2c);
|
|
|
|
ret = i2c_add_numbered_adapter(&i2c->adap);
|
|
if (ret < 0)
|
|
goto ereqirq;
|
|
|
|
platform_set_drvdata(dev, i2c);
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
dev_info(&i2c->adap.dev, " PXA I2C adapter, slave address %d\n",
|
|
i2c->slave_addr);
|
|
#else
|
|
dev_info(&i2c->adap.dev, " PXA I2C adapter\n");
|
|
#endif
|
|
return 0;
|
|
|
|
ereqirq:
|
|
clk_disable_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_pxa_remove(struct platform_device *dev)
|
|
{
|
|
struct pxa_i2c *i2c = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
clk_disable_unprepare(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i2c_pxa_suspend_noirq(struct device *dev)
|
|
{
|
|
struct pxa_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
clk_disable(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_pxa_resume_noirq(struct device *dev)
|
|
{
|
|
struct pxa_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
clk_enable(i2c->clk);
|
|
i2c_pxa_reset(i2c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops i2c_pxa_dev_pm_ops = {
|
|
.suspend_noirq = i2c_pxa_suspend_noirq,
|
|
.resume_noirq = i2c_pxa_resume_noirq,
|
|
};
|
|
|
|
#define I2C_PXA_DEV_PM_OPS (&i2c_pxa_dev_pm_ops)
|
|
#else
|
|
#define I2C_PXA_DEV_PM_OPS NULL
|
|
#endif
|
|
|
|
static struct platform_driver i2c_pxa_driver = {
|
|
.probe = i2c_pxa_probe,
|
|
.remove = i2c_pxa_remove,
|
|
.driver = {
|
|
.name = "pxa2xx-i2c",
|
|
.pm = I2C_PXA_DEV_PM_OPS,
|
|
.of_match_table = i2c_pxa_dt_ids,
|
|
},
|
|
.id_table = i2c_pxa_id_table,
|
|
};
|
|
|
|
static int __init i2c_adap_pxa_init(void)
|
|
{
|
|
return platform_driver_register(&i2c_pxa_driver);
|
|
}
|
|
|
|
static void __exit i2c_adap_pxa_exit(void)
|
|
{
|
|
platform_driver_unregister(&i2c_pxa_driver);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa2xx-i2c");
|
|
|
|
subsys_initcall(i2c_adap_pxa_init);
|
|
module_exit(i2c_adap_pxa_exit);
|