mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 18:39:59 +00:00
![Liu Xiang](/assets/img/avatar_default.png)
The '|' operation of status in linflex_rxint is unnecessary, so it can be removed. Signed-off-by: Liu Xiang <liuxiang_1999@126.com> Link: https://lore.kernel.org/r/1604065391-3790-1-git-send-email-liuxiang_1999@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
937 lines
22 KiB
C
937 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Freescale LINFlexD UART serial port driver
|
|
*
|
|
* Copyright 2012-2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017-2019 NXP
|
|
*/
|
|
|
|
#include <linux/console.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/delay.h>
|
|
|
|
/* All registers are 32-bit width */
|
|
|
|
#define LINCR1 0x0000 /* LIN control register */
|
|
#define LINIER 0x0004 /* LIN interrupt enable register */
|
|
#define LINSR 0x0008 /* LIN status register */
|
|
#define LINESR 0x000C /* LIN error status register */
|
|
#define UARTCR 0x0010 /* UART mode control register */
|
|
#define UARTSR 0x0014 /* UART mode status register */
|
|
#define LINTCSR 0x0018 /* LIN timeout control status register */
|
|
#define LINOCR 0x001C /* LIN output compare register */
|
|
#define LINTOCR 0x0020 /* LIN timeout control register */
|
|
#define LINFBRR 0x0024 /* LIN fractional baud rate register */
|
|
#define LINIBRR 0x0028 /* LIN integer baud rate register */
|
|
#define LINCFR 0x002C /* LIN checksum field register */
|
|
#define LINCR2 0x0030 /* LIN control register 2 */
|
|
#define BIDR 0x0034 /* Buffer identifier register */
|
|
#define BDRL 0x0038 /* Buffer data register least significant */
|
|
#define BDRM 0x003C /* Buffer data register most significant */
|
|
#define IFER 0x0040 /* Identifier filter enable register */
|
|
#define IFMI 0x0044 /* Identifier filter match index */
|
|
#define IFMR 0x0048 /* Identifier filter mode register */
|
|
#define GCR 0x004C /* Global control register */
|
|
#define UARTPTO 0x0050 /* UART preset timeout register */
|
|
#define UARTCTO 0x0054 /* UART current timeout register */
|
|
|
|
/*
|
|
* Register field definitions
|
|
*/
|
|
|
|
#define LINFLEXD_LINCR1_INIT BIT(0)
|
|
#define LINFLEXD_LINCR1_MME BIT(4)
|
|
#define LINFLEXD_LINCR1_BF BIT(7)
|
|
|
|
#define LINFLEXD_LINSR_LINS_INITMODE BIT(12)
|
|
#define LINFLEXD_LINSR_LINS_MASK (0xF << 12)
|
|
|
|
#define LINFLEXD_LINIER_SZIE BIT(15)
|
|
#define LINFLEXD_LINIER_OCIE BIT(14)
|
|
#define LINFLEXD_LINIER_BEIE BIT(13)
|
|
#define LINFLEXD_LINIER_CEIE BIT(12)
|
|
#define LINFLEXD_LINIER_HEIE BIT(11)
|
|
#define LINFLEXD_LINIER_FEIE BIT(8)
|
|
#define LINFLEXD_LINIER_BOIE BIT(7)
|
|
#define LINFLEXD_LINIER_LSIE BIT(6)
|
|
#define LINFLEXD_LINIER_WUIE BIT(5)
|
|
#define LINFLEXD_LINIER_DBFIE BIT(4)
|
|
#define LINFLEXD_LINIER_DBEIETOIE BIT(3)
|
|
#define LINFLEXD_LINIER_DRIE BIT(2)
|
|
#define LINFLEXD_LINIER_DTIE BIT(1)
|
|
#define LINFLEXD_LINIER_HRIE BIT(0)
|
|
|
|
#define LINFLEXD_UARTCR_OSR_MASK (0xF << 24)
|
|
#define LINFLEXD_UARTCR_OSR(uartcr) (((uartcr) \
|
|
& LINFLEXD_UARTCR_OSR_MASK) >> 24)
|
|
|
|
#define LINFLEXD_UARTCR_ROSE BIT(23)
|
|
|
|
#define LINFLEXD_UARTCR_RFBM BIT(9)
|
|
#define LINFLEXD_UARTCR_TFBM BIT(8)
|
|
#define LINFLEXD_UARTCR_WL1 BIT(7)
|
|
#define LINFLEXD_UARTCR_PC1 BIT(6)
|
|
|
|
#define LINFLEXD_UARTCR_RXEN BIT(5)
|
|
#define LINFLEXD_UARTCR_TXEN BIT(4)
|
|
#define LINFLEXD_UARTCR_PC0 BIT(3)
|
|
|
|
#define LINFLEXD_UARTCR_PCE BIT(2)
|
|
#define LINFLEXD_UARTCR_WL0 BIT(1)
|
|
#define LINFLEXD_UARTCR_UART BIT(0)
|
|
|
|
#define LINFLEXD_UARTSR_SZF BIT(15)
|
|
#define LINFLEXD_UARTSR_OCF BIT(14)
|
|
#define LINFLEXD_UARTSR_PE3 BIT(13)
|
|
#define LINFLEXD_UARTSR_PE2 BIT(12)
|
|
#define LINFLEXD_UARTSR_PE1 BIT(11)
|
|
#define LINFLEXD_UARTSR_PE0 BIT(10)
|
|
#define LINFLEXD_UARTSR_RMB BIT(9)
|
|
#define LINFLEXD_UARTSR_FEF BIT(8)
|
|
#define LINFLEXD_UARTSR_BOF BIT(7)
|
|
#define LINFLEXD_UARTSR_RPS BIT(6)
|
|
#define LINFLEXD_UARTSR_WUF BIT(5)
|
|
#define LINFLEXD_UARTSR_4 BIT(4)
|
|
|
|
#define LINFLEXD_UARTSR_TO BIT(3)
|
|
|
|
#define LINFLEXD_UARTSR_DRFRFE BIT(2)
|
|
#define LINFLEXD_UARTSR_DTFTFF BIT(1)
|
|
#define LINFLEXD_UARTSR_NF BIT(0)
|
|
#define LINFLEXD_UARTSR_PE (LINFLEXD_UARTSR_PE0 |\
|
|
LINFLEXD_UARTSR_PE1 |\
|
|
LINFLEXD_UARTSR_PE2 |\
|
|
LINFLEXD_UARTSR_PE3)
|
|
|
|
#define LINFLEX_LDIV_MULTIPLIER (16)
|
|
|
|
#define DRIVER_NAME "fsl-linflexuart"
|
|
#define DEV_NAME "ttyLF"
|
|
#define UART_NR 4
|
|
|
|
#define EARLYCON_BUFFER_INITIAL_CAP 8
|
|
|
|
#define PREINIT_DELAY 2000 /* us */
|
|
|
|
static const struct of_device_id linflex_dt_ids[] = {
|
|
{
|
|
.compatible = "fsl,s32v234-linflexuart",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, linflex_dt_ids);
|
|
|
|
#ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE
|
|
static struct uart_port *earlycon_port;
|
|
static bool linflex_earlycon_same_instance;
|
|
static DEFINE_SPINLOCK(init_lock);
|
|
static bool during_init;
|
|
|
|
static struct {
|
|
char *content;
|
|
unsigned int len, cap;
|
|
} earlycon_buf;
|
|
#endif
|
|
|
|
static void linflex_stop_tx(struct uart_port *port)
|
|
{
|
|
unsigned long ier;
|
|
|
|
ier = readl(port->membase + LINIER);
|
|
ier &= ~(LINFLEXD_LINIER_DTIE);
|
|
writel(ier, port->membase + LINIER);
|
|
}
|
|
|
|
static void linflex_stop_rx(struct uart_port *port)
|
|
{
|
|
unsigned long ier;
|
|
|
|
ier = readl(port->membase + LINIER);
|
|
writel(ier & ~LINFLEXD_LINIER_DRIE, port->membase + LINIER);
|
|
}
|
|
|
|
static inline void linflex_transmit_buffer(struct uart_port *sport)
|
|
{
|
|
struct circ_buf *xmit = &sport->state->xmit;
|
|
unsigned char c;
|
|
unsigned long status;
|
|
|
|
while (!uart_circ_empty(xmit)) {
|
|
c = xmit->buf[xmit->tail];
|
|
writeb(c, sport->membase + BDRL);
|
|
|
|
/* Waiting for data transmission completed. */
|
|
while (((status = readl(sport->membase + UARTSR)) &
|
|
LINFLEXD_UARTSR_DTFTFF) !=
|
|
LINFLEXD_UARTSR_DTFTFF)
|
|
;
|
|
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
sport->icount.tx++;
|
|
|
|
writel(status | LINFLEXD_UARTSR_DTFTFF,
|
|
sport->membase + UARTSR);
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(sport);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
linflex_stop_tx(sport);
|
|
}
|
|
|
|
static void linflex_start_tx(struct uart_port *port)
|
|
{
|
|
unsigned long ier;
|
|
|
|
linflex_transmit_buffer(port);
|
|
ier = readl(port->membase + LINIER);
|
|
writel(ier | LINFLEXD_LINIER_DTIE, port->membase + LINIER);
|
|
}
|
|
|
|
static irqreturn_t linflex_txint(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *sport = dev_id;
|
|
struct circ_buf *xmit = &sport->state->xmit;
|
|
unsigned long flags;
|
|
unsigned long status;
|
|
|
|
spin_lock_irqsave(&sport->lock, flags);
|
|
|
|
if (sport->x_char) {
|
|
writeb(sport->x_char, sport->membase + BDRL);
|
|
|
|
/* waiting for data transmission completed */
|
|
while (((status = readl(sport->membase + UARTSR)) &
|
|
LINFLEXD_UARTSR_DTFTFF) != LINFLEXD_UARTSR_DTFTFF)
|
|
;
|
|
|
|
writel(status | LINFLEXD_UARTSR_DTFTFF,
|
|
sport->membase + UARTSR);
|
|
|
|
goto out;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(sport)) {
|
|
linflex_stop_tx(sport);
|
|
goto out;
|
|
}
|
|
|
|
linflex_transmit_buffer(sport);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(sport);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&sport->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t linflex_rxint(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *sport = dev_id;
|
|
unsigned int flg;
|
|
struct tty_port *port = &sport->state->port;
|
|
unsigned long flags, status;
|
|
unsigned char rx;
|
|
bool brk;
|
|
|
|
spin_lock_irqsave(&sport->lock, flags);
|
|
|
|
status = readl(sport->membase + UARTSR);
|
|
while (status & LINFLEXD_UARTSR_RMB) {
|
|
rx = readb(sport->membase + BDRM);
|
|
brk = false;
|
|
flg = TTY_NORMAL;
|
|
sport->icount.rx++;
|
|
|
|
if (status & (LINFLEXD_UARTSR_BOF | LINFLEXD_UARTSR_FEF |
|
|
LINFLEXD_UARTSR_PE)) {
|
|
if (status & LINFLEXD_UARTSR_BOF)
|
|
sport->icount.overrun++;
|
|
if (status & LINFLEXD_UARTSR_FEF) {
|
|
if (!rx) {
|
|
brk = true;
|
|
sport->icount.brk++;
|
|
} else
|
|
sport->icount.frame++;
|
|
}
|
|
if (status & LINFLEXD_UARTSR_PE)
|
|
sport->icount.parity++;
|
|
}
|
|
|
|
writel(status, sport->membase + UARTSR);
|
|
status = readl(sport->membase + UARTSR);
|
|
|
|
if (brk) {
|
|
uart_handle_break(sport);
|
|
} else {
|
|
if (uart_handle_sysrq_char(sport, (unsigned char)rx))
|
|
continue;
|
|
tty_insert_flip_char(port, rx, flg);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sport->lock, flags);
|
|
|
|
tty_flip_buffer_push(port);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t linflex_int(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *sport = dev_id;
|
|
unsigned long status;
|
|
|
|
status = readl(sport->membase + UARTSR);
|
|
|
|
if (status & LINFLEXD_UARTSR_DRFRFE)
|
|
linflex_rxint(irq, dev_id);
|
|
if (status & LINFLEXD_UARTSR_DTFTFF)
|
|
linflex_txint(irq, dev_id);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* return TIOCSER_TEMT when transmitter is not busy */
|
|
static unsigned int linflex_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned long status;
|
|
|
|
status = readl(port->membase + UARTSR) & LINFLEXD_UARTSR_DTFTFF;
|
|
|
|
return status ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
static unsigned int linflex_get_mctrl(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void linflex_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
}
|
|
|
|
static void linflex_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
}
|
|
|
|
static void linflex_setup_watermark(struct uart_port *sport)
|
|
{
|
|
unsigned long cr, ier, cr1;
|
|
|
|
/* Disable transmission/reception */
|
|
ier = readl(sport->membase + LINIER);
|
|
ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE);
|
|
writel(ier, sport->membase + LINIER);
|
|
|
|
cr = readl(sport->membase + UARTCR);
|
|
cr &= ~(LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN);
|
|
writel(cr, sport->membase + UARTCR);
|
|
|
|
/* Enter initialization mode by setting INIT bit */
|
|
|
|
/* set the Linflex in master mode and activate by-pass filter */
|
|
cr1 = LINFLEXD_LINCR1_BF | LINFLEXD_LINCR1_MME
|
|
| LINFLEXD_LINCR1_INIT;
|
|
writel(cr1, sport->membase + LINCR1);
|
|
|
|
/* wait for init mode entry */
|
|
while ((readl(sport->membase + LINSR)
|
|
& LINFLEXD_LINSR_LINS_MASK)
|
|
!= LINFLEXD_LINSR_LINS_INITMODE)
|
|
;
|
|
|
|
/*
|
|
* UART = 0x1; - Linflex working in UART mode
|
|
* TXEN = 0x1; - Enable transmission of data now
|
|
* RXEn = 0x1; - Receiver enabled
|
|
* WL0 = 0x1; - 8 bit data
|
|
* PCE = 0x0; - No parity
|
|
*/
|
|
|
|
/* set UART bit to allow writing other bits */
|
|
writel(LINFLEXD_UARTCR_UART, sport->membase + UARTCR);
|
|
|
|
cr = (LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN |
|
|
LINFLEXD_UARTCR_WL0 | LINFLEXD_UARTCR_UART);
|
|
|
|
writel(cr, sport->membase + UARTCR);
|
|
|
|
cr1 &= ~(LINFLEXD_LINCR1_INIT);
|
|
|
|
writel(cr1, sport->membase + LINCR1);
|
|
|
|
ier = readl(sport->membase + LINIER);
|
|
ier |= LINFLEXD_LINIER_DRIE;
|
|
ier |= LINFLEXD_LINIER_DTIE;
|
|
|
|
writel(ier, sport->membase + LINIER);
|
|
}
|
|
|
|
static int linflex_startup(struct uart_port *port)
|
|
{
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
linflex_setup_watermark(port);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
ret = devm_request_irq(port->dev, port->irq, linflex_int, 0,
|
|
DRIVER_NAME, port);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void linflex_shutdown(struct uart_port *port)
|
|
{
|
|
unsigned long ier;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
/* disable interrupts */
|
|
ier = readl(port->membase + LINIER);
|
|
ier &= ~(LINFLEXD_LINIER_DRIE | LINFLEXD_LINIER_DTIE);
|
|
writel(ier, port->membase + LINIER);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
devm_free_irq(port->dev, port->irq, port);
|
|
}
|
|
|
|
static void
|
|
linflex_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
unsigned long flags;
|
|
unsigned long cr, old_cr, cr1;
|
|
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
|
|
|
|
cr = readl(port->membase + UARTCR);
|
|
old_cr = cr;
|
|
|
|
/* Enter initialization mode by setting INIT bit */
|
|
cr1 = readl(port->membase + LINCR1);
|
|
cr1 |= LINFLEXD_LINCR1_INIT;
|
|
writel(cr1, port->membase + LINCR1);
|
|
|
|
/* wait for init mode entry */
|
|
while ((readl(port->membase + LINSR)
|
|
& LINFLEXD_LINSR_LINS_MASK)
|
|
!= LINFLEXD_LINSR_LINS_INITMODE)
|
|
;
|
|
|
|
/*
|
|
* only support CS8 and CS7, and for CS7 must enable PE.
|
|
* supported mode:
|
|
* - (7,e/o,1)
|
|
* - (8,n,1)
|
|
* - (8,e/o,1)
|
|
*/
|
|
/* enter the UART into configuration mode */
|
|
|
|
while ((termios->c_cflag & CSIZE) != CS8 &&
|
|
(termios->c_cflag & CSIZE) != CS7) {
|
|
termios->c_cflag &= ~CSIZE;
|
|
termios->c_cflag |= old_csize;
|
|
old_csize = CS8;
|
|
}
|
|
|
|
if ((termios->c_cflag & CSIZE) == CS7) {
|
|
/* Word length: WL1WL0:00 */
|
|
cr = old_cr & ~LINFLEXD_UARTCR_WL1 & ~LINFLEXD_UARTCR_WL0;
|
|
}
|
|
|
|
if ((termios->c_cflag & CSIZE) == CS8) {
|
|
/* Word length: WL1WL0:01 */
|
|
cr = (old_cr | LINFLEXD_UARTCR_WL0) & ~LINFLEXD_UARTCR_WL1;
|
|
}
|
|
|
|
if (termios->c_cflag & CMSPAR) {
|
|
if ((termios->c_cflag & CSIZE) != CS8) {
|
|
termios->c_cflag &= ~CSIZE;
|
|
termios->c_cflag |= CS8;
|
|
}
|
|
/* has a space/sticky bit */
|
|
cr |= LINFLEXD_UARTCR_WL0;
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
termios->c_cflag &= ~CSTOPB;
|
|
|
|
/* parity must be enabled when CS7 to match 8-bits format */
|
|
if ((termios->c_cflag & CSIZE) == CS7)
|
|
termios->c_cflag |= PARENB;
|
|
|
|
if ((termios->c_cflag & PARENB)) {
|
|
cr |= LINFLEXD_UARTCR_PCE;
|
|
if (termios->c_cflag & PARODD)
|
|
cr = (cr | LINFLEXD_UARTCR_PC0) &
|
|
(~LINFLEXD_UARTCR_PC1);
|
|
else
|
|
cr = cr & (~LINFLEXD_UARTCR_PC1 &
|
|
~LINFLEXD_UARTCR_PC0);
|
|
} else {
|
|
cr &= ~LINFLEXD_UARTCR_PCE;
|
|
}
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
port->read_status_mask = 0;
|
|
|
|
if (termios->c_iflag & INPCK)
|
|
port->read_status_mask |= (LINFLEXD_UARTSR_FEF |
|
|
LINFLEXD_UARTSR_PE0 |
|
|
LINFLEXD_UARTSR_PE1 |
|
|
LINFLEXD_UARTSR_PE2 |
|
|
LINFLEXD_UARTSR_PE3);
|
|
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
|
|
port->read_status_mask |= LINFLEXD_UARTSR_FEF;
|
|
|
|
/* characters to ignore */
|
|
port->ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= LINFLEXD_UARTSR_PE;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
port->ignore_status_mask |= LINFLEXD_UARTSR_PE;
|
|
/*
|
|
* if we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= LINFLEXD_UARTSR_BOF;
|
|
}
|
|
|
|
writel(cr, port->membase + UARTCR);
|
|
|
|
cr1 &= ~(LINFLEXD_LINCR1_INIT);
|
|
|
|
writel(cr1, port->membase + LINCR1);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static const char *linflex_type(struct uart_port *port)
|
|
{
|
|
return "FSL_LINFLEX";
|
|
}
|
|
|
|
static void linflex_release_port(struct uart_port *port)
|
|
{
|
|
/* nothing to do */
|
|
}
|
|
|
|
static int linflex_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* configure/auto-configure the port */
|
|
static void linflex_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE)
|
|
port->type = PORT_LINFLEXUART;
|
|
}
|
|
|
|
static const struct uart_ops linflex_pops = {
|
|
.tx_empty = linflex_tx_empty,
|
|
.set_mctrl = linflex_set_mctrl,
|
|
.get_mctrl = linflex_get_mctrl,
|
|
.stop_tx = linflex_stop_tx,
|
|
.start_tx = linflex_start_tx,
|
|
.stop_rx = linflex_stop_rx,
|
|
.break_ctl = linflex_break_ctl,
|
|
.startup = linflex_startup,
|
|
.shutdown = linflex_shutdown,
|
|
.set_termios = linflex_set_termios,
|
|
.type = linflex_type,
|
|
.request_port = linflex_request_port,
|
|
.release_port = linflex_release_port,
|
|
.config_port = linflex_config_port,
|
|
};
|
|
|
|
static struct uart_port *linflex_ports[UART_NR];
|
|
|
|
#ifdef CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE
|
|
static void linflex_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
unsigned long cr;
|
|
|
|
cr = readl(port->membase + UARTCR);
|
|
|
|
writeb(ch, port->membase + BDRL);
|
|
|
|
if (!(cr & LINFLEXD_UARTCR_TFBM))
|
|
while ((readl(port->membase + UARTSR) &
|
|
LINFLEXD_UARTSR_DTFTFF)
|
|
!= LINFLEXD_UARTSR_DTFTFF)
|
|
;
|
|
else
|
|
while (readl(port->membase + UARTSR) &
|
|
LINFLEXD_UARTSR_DTFTFF)
|
|
;
|
|
|
|
if (!(cr & LINFLEXD_UARTCR_TFBM)) {
|
|
writel((readl(port->membase + UARTSR) |
|
|
LINFLEXD_UARTSR_DTFTFF),
|
|
port->membase + UARTSR);
|
|
}
|
|
}
|
|
|
|
static void linflex_earlycon_putchar(struct uart_port *port, int ch)
|
|
{
|
|
unsigned long flags;
|
|
char *ret;
|
|
|
|
if (!linflex_earlycon_same_instance) {
|
|
linflex_console_putchar(port, ch);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&init_lock, flags);
|
|
if (!during_init)
|
|
goto outside_init;
|
|
|
|
if (earlycon_buf.len >= 1 << CONFIG_LOG_BUF_SHIFT)
|
|
goto init_release;
|
|
|
|
if (!earlycon_buf.cap) {
|
|
earlycon_buf.content = kmalloc(EARLYCON_BUFFER_INITIAL_CAP,
|
|
GFP_ATOMIC);
|
|
earlycon_buf.cap = earlycon_buf.content ?
|
|
EARLYCON_BUFFER_INITIAL_CAP : 0;
|
|
} else if (earlycon_buf.len == earlycon_buf.cap) {
|
|
ret = krealloc(earlycon_buf.content, earlycon_buf.cap << 1,
|
|
GFP_ATOMIC);
|
|
if (ret) {
|
|
earlycon_buf.content = ret;
|
|
earlycon_buf.cap <<= 1;
|
|
}
|
|
}
|
|
|
|
if (earlycon_buf.len < earlycon_buf.cap)
|
|
earlycon_buf.content[earlycon_buf.len++] = ch;
|
|
|
|
goto init_release;
|
|
|
|
outside_init:
|
|
linflex_console_putchar(port, ch);
|
|
init_release:
|
|
spin_unlock_irqrestore(&init_lock, flags);
|
|
}
|
|
|
|
static void linflex_string_write(struct uart_port *sport, const char *s,
|
|
unsigned int count)
|
|
{
|
|
unsigned long cr, ier = 0;
|
|
|
|
ier = readl(sport->membase + LINIER);
|
|
linflex_stop_tx(sport);
|
|
|
|
cr = readl(sport->membase + UARTCR);
|
|
cr |= (LINFLEXD_UARTCR_TXEN);
|
|
writel(cr, sport->membase + UARTCR);
|
|
|
|
uart_console_write(sport, s, count, linflex_console_putchar);
|
|
|
|
writel(ier, sport->membase + LINIER);
|
|
}
|
|
|
|
static void
|
|
linflex_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct uart_port *sport = linflex_ports[co->index];
|
|
unsigned long flags;
|
|
int locked = 1;
|
|
|
|
if (sport->sysrq)
|
|
locked = 0;
|
|
else if (oops_in_progress)
|
|
locked = spin_trylock_irqsave(&sport->lock, flags);
|
|
else
|
|
spin_lock_irqsave(&sport->lock, flags);
|
|
|
|
linflex_string_write(sport, s, count);
|
|
|
|
if (locked)
|
|
spin_unlock_irqrestore(&sport->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* if the port was already initialised (eg, by a boot loader),
|
|
* try to determine the current setup.
|
|
*/
|
|
static void __init
|
|
linflex_console_get_options(struct uart_port *sport, int *parity, int *bits)
|
|
{
|
|
unsigned long cr;
|
|
|
|
cr = readl(sport->membase + UARTCR);
|
|
cr &= LINFLEXD_UARTCR_RXEN | LINFLEXD_UARTCR_TXEN;
|
|
|
|
if (!cr)
|
|
return;
|
|
|
|
/* ok, the port was enabled */
|
|
|
|
*parity = 'n';
|
|
if (cr & LINFLEXD_UARTCR_PCE) {
|
|
if (cr & LINFLEXD_UARTCR_PC0)
|
|
*parity = 'o';
|
|
else
|
|
*parity = 'e';
|
|
}
|
|
|
|
if ((cr & LINFLEXD_UARTCR_WL0) && ((cr & LINFLEXD_UARTCR_WL1) == 0)) {
|
|
if (cr & LINFLEXD_UARTCR_PCE)
|
|
*bits = 9;
|
|
else
|
|
*bits = 8;
|
|
}
|
|
}
|
|
|
|
static int __init linflex_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_port *sport;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
int ret;
|
|
int i;
|
|
unsigned long flags;
|
|
/*
|
|
* check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index == -1 || co->index >= ARRAY_SIZE(linflex_ports))
|
|
co->index = 0;
|
|
|
|
sport = linflex_ports[co->index];
|
|
if (!sport)
|
|
return -ENODEV;
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
else
|
|
linflex_console_get_options(sport, &parity, &bits);
|
|
|
|
if (earlycon_port && sport->mapbase == earlycon_port->mapbase) {
|
|
linflex_earlycon_same_instance = true;
|
|
|
|
spin_lock_irqsave(&init_lock, flags);
|
|
during_init = true;
|
|
spin_unlock_irqrestore(&init_lock, flags);
|
|
|
|
/* Workaround for character loss or output of many invalid
|
|
* characters, when INIT mode is entered shortly after a
|
|
* character has just been printed.
|
|
*/
|
|
udelay(PREINIT_DELAY);
|
|
}
|
|
|
|
linflex_setup_watermark(sport);
|
|
|
|
ret = uart_set_options(sport, co, baud, parity, bits, flow);
|
|
|
|
if (!linflex_earlycon_same_instance)
|
|
goto done;
|
|
|
|
spin_lock_irqsave(&init_lock, flags);
|
|
|
|
/* Emptying buffer */
|
|
if (earlycon_buf.len) {
|
|
for (i = 0; i < earlycon_buf.len; i++)
|
|
linflex_console_putchar(earlycon_port,
|
|
earlycon_buf.content[i]);
|
|
|
|
kfree(earlycon_buf.content);
|
|
earlycon_buf.len = 0;
|
|
}
|
|
|
|
during_init = false;
|
|
spin_unlock_irqrestore(&init_lock, flags);
|
|
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
static struct uart_driver linflex_reg;
|
|
static struct console linflex_console = {
|
|
.name = DEV_NAME,
|
|
.write = linflex_console_write,
|
|
.device = uart_console_device,
|
|
.setup = linflex_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &linflex_reg,
|
|
};
|
|
|
|
static void linflex_earlycon_write(struct console *con, const char *s,
|
|
unsigned int n)
|
|
{
|
|
struct earlycon_device *dev = con->data;
|
|
|
|
uart_console_write(&dev->port, s, n, linflex_earlycon_putchar);
|
|
}
|
|
|
|
static int __init linflex_early_console_setup(struct earlycon_device *device,
|
|
const char *options)
|
|
{
|
|
if (!device->port.membase)
|
|
return -ENODEV;
|
|
|
|
device->con->write = linflex_earlycon_write;
|
|
earlycon_port = &device->port;
|
|
|
|
return 0;
|
|
}
|
|
|
|
OF_EARLYCON_DECLARE(linflex, "fsl,s32v234-linflexuart",
|
|
linflex_early_console_setup);
|
|
|
|
#define LINFLEX_CONSOLE (&linflex_console)
|
|
#else
|
|
#define LINFLEX_CONSOLE NULL
|
|
#endif
|
|
|
|
static struct uart_driver linflex_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = DRIVER_NAME,
|
|
.dev_name = DEV_NAME,
|
|
.nr = ARRAY_SIZE(linflex_ports),
|
|
.cons = LINFLEX_CONSOLE,
|
|
};
|
|
|
|
static int linflex_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct uart_port *sport;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL);
|
|
if (!sport)
|
|
return -ENOMEM;
|
|
|
|
ret = of_alias_get_id(np, "serial");
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
|
|
return ret;
|
|
}
|
|
if (ret >= UART_NR) {
|
|
dev_err(&pdev->dev, "driver limited to %d serial ports\n",
|
|
UART_NR);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
sport->line = ret;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENODEV;
|
|
|
|
sport->mapbase = res->start;
|
|
sport->membase = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(sport->membase))
|
|
return PTR_ERR(sport->membase);
|
|
|
|
sport->dev = &pdev->dev;
|
|
sport->type = PORT_LINFLEXUART;
|
|
sport->iotype = UPIO_MEM;
|
|
sport->irq = platform_get_irq(pdev, 0);
|
|
sport->ops = &linflex_pops;
|
|
sport->flags = UPF_BOOT_AUTOCONF;
|
|
sport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE);
|
|
|
|
linflex_ports[sport->line] = sport;
|
|
|
|
platform_set_drvdata(pdev, sport);
|
|
|
|
ret = uart_add_one_port(&linflex_reg, sport);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int linflex_remove(struct platform_device *pdev)
|
|
{
|
|
struct uart_port *sport = platform_get_drvdata(pdev);
|
|
|
|
uart_remove_one_port(&linflex_reg, sport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int linflex_suspend(struct device *dev)
|
|
{
|
|
struct uart_port *sport = dev_get_drvdata(dev);
|
|
|
|
uart_suspend_port(&linflex_reg, sport);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int linflex_resume(struct device *dev)
|
|
{
|
|
struct uart_port *sport = dev_get_drvdata(dev);
|
|
|
|
uart_resume_port(&linflex_reg, sport);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(linflex_pm_ops, linflex_suspend, linflex_resume);
|
|
|
|
static struct platform_driver linflex_driver = {
|
|
.probe = linflex_probe,
|
|
.remove = linflex_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = linflex_dt_ids,
|
|
.pm = &linflex_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init linflex_serial_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&linflex_reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&linflex_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&linflex_reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit linflex_serial_exit(void)
|
|
{
|
|
platform_driver_unregister(&linflex_driver);
|
|
uart_unregister_driver(&linflex_reg);
|
|
}
|
|
|
|
module_init(linflex_serial_init);
|
|
module_exit(linflex_serial_exit);
|
|
|
|
MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
|
|
MODULE_LICENSE("GPL v2");
|