mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Ralf Baechle](/assets/img/avatar_default.png)
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
477 lines
14 KiB
C
477 lines
14 KiB
C
/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */
|
|
/*
|
|
Written 1993-1994 by Donald Becker.
|
|
|
|
Copyright 1994 by Donald Becker.
|
|
Copyright 1993 United States Government as represented by the
|
|
Director, National Security Agency. This software may be used and
|
|
distributed according to the terms of the GNU General Public License,
|
|
incorporated herein by reference.
|
|
|
|
This is a driver for the Cabletron E2100 series ethercards.
|
|
|
|
The Author may be reached as becker@scyld.com, or C/O
|
|
Scyld Computing Corporation
|
|
410 Severn Ave., Suite 210
|
|
Annapolis MD 21403
|
|
|
|
The E2100 series ethercard is a fairly generic shared memory 8390
|
|
implementation. The only unusual aspect is the way the shared memory
|
|
registers are set: first you do an inb() in what is normally the
|
|
station address region, and the low three bits of next outb() *address*
|
|
is used as the write value for that register. Either someone wasn't
|
|
too used to dem bit en bites, or they were trying to obfuscate the
|
|
programming interface.
|
|
|
|
There is an additional complication when setting the window on the packet
|
|
buffer. You must first do a read into the packet buffer region with the
|
|
low 8 address bits the address setting the page for the start of the packet
|
|
buffer window, and then do the above operation. See mem_on() for details.
|
|
|
|
One bug on the chip is that even a hard reset won't disable the memory
|
|
window, usually resulting in a hung machine if mem_off() isn't called.
|
|
If this happens, you must power down the machine for about 30 seconds.
|
|
*/
|
|
|
|
static const char version[] =
|
|
"e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include "8390.h"
|
|
|
|
#define DRV_NAME "e2100"
|
|
|
|
static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0};
|
|
|
|
/* Offsets from the base_addr.
|
|
Read from the ASIC register, and the low three bits of the next outb()
|
|
address is used to set the corresponding register. */
|
|
#define E21_NIC_OFFSET 0 /* Offset to the 8390 NIC. */
|
|
#define E21_ASIC 0x10
|
|
#define E21_MEM_ENABLE 0x10
|
|
#define E21_MEM_ON 0x05 /* Enable memory in 16 bit mode. */
|
|
#define E21_MEM_ON_8 0x07 /* Enable memory in 8 bit mode. */
|
|
#define E21_MEM_BASE 0x11
|
|
#define E21_IRQ_LOW 0x12 /* The low three bits of the IRQ number. */
|
|
#define E21_IRQ_HIGH 0x14 /* The high IRQ bit and media select ... */
|
|
#define E21_MEDIA 0x14 /* (alias). */
|
|
#define E21_ALT_IFPORT 0x02 /* Set to use the other (BNC,AUI) port. */
|
|
#define E21_BIG_MEM 0x04 /* Use a bigger (64K) buffer (we don't) */
|
|
#define E21_SAPROM 0x10 /* Offset to station address data. */
|
|
#define E21_IO_EXTENT 0x20
|
|
|
|
static inline void mem_on(short port, volatile char __iomem *mem_base,
|
|
unsigned char start_page )
|
|
{
|
|
/* This is a little weird: set the shared memory window by doing a
|
|
read. The low address bits specify the starting page. */
|
|
readb(mem_base+start_page);
|
|
inb(port + E21_MEM_ENABLE);
|
|
outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON);
|
|
}
|
|
|
|
static inline void mem_off(short port)
|
|
{
|
|
inb(port + E21_MEM_ENABLE);
|
|
outb(0x00, port + E21_MEM_ENABLE);
|
|
}
|
|
|
|
/* In other drivers I put the TX pages first, but the E2100 window circuitry
|
|
is designed to have a 4K Tx region last. The windowing circuitry wraps the
|
|
window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring
|
|
appear contiguously in the window. */
|
|
#define E21_RX_START_PG 0x00 /* First page of RX buffer */
|
|
#define E21_RX_STOP_PG 0x30 /* Last page +1 of RX ring */
|
|
#define E21_BIG_RX_STOP_PG 0xF0 /* Last page +1 of RX ring */
|
|
#define E21_TX_START_PG E21_RX_STOP_PG /* First page of TX buffer */
|
|
|
|
static int e21_probe1(struct net_device *dev, int ioaddr);
|
|
|
|
static int e21_open(struct net_device *dev);
|
|
static void e21_reset_8390(struct net_device *dev);
|
|
static void e21_block_input(struct net_device *dev, int count,
|
|
struct sk_buff *skb, int ring_offset);
|
|
static void e21_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf, int start_page);
|
|
static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
|
|
int ring_page);
|
|
|
|
static int e21_close(struct net_device *dev);
|
|
|
|
|
|
/* Probe for the E2100 series ethercards. These cards have an 8390 at the
|
|
base address and the station address at both offset 0x10 and 0x18. I read
|
|
the station address from offset 0x18 to avoid the dataport of NE2000
|
|
ethercards, and look for Ctron's unique ID (first three octets of the
|
|
station address).
|
|
*/
|
|
|
|
static int __init do_e2100_probe(struct net_device *dev)
|
|
{
|
|
int *port;
|
|
int base_addr = dev->base_addr;
|
|
int irq = dev->irq;
|
|
|
|
if (base_addr > 0x1ff) /* Check a single specified location. */
|
|
return e21_probe1(dev, base_addr);
|
|
else if (base_addr != 0) /* Don't probe at all. */
|
|
return -ENXIO;
|
|
|
|
for (port = e21_probe_list; *port; port++) {
|
|
dev->irq = irq;
|
|
if (e21_probe1(dev, *port) == 0)
|
|
return 0;
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifndef MODULE
|
|
struct net_device * __init e2100_probe(int unit)
|
|
{
|
|
struct net_device *dev = alloc_ei_netdev();
|
|
int err;
|
|
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
|
|
err = do_e2100_probe(dev);
|
|
if (err)
|
|
goto out;
|
|
return dev;
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
#endif
|
|
|
|
static int __init e21_probe1(struct net_device *dev, int ioaddr)
|
|
{
|
|
int i, status, retval;
|
|
unsigned char *station_addr = dev->dev_addr;
|
|
static unsigned version_printed;
|
|
|
|
if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME))
|
|
return -EBUSY;
|
|
|
|
/* First check the station address for the Ctron prefix. */
|
|
if (inb(ioaddr + E21_SAPROM + 0) != 0x00
|
|
|| inb(ioaddr + E21_SAPROM + 1) != 0x00
|
|
|| inb(ioaddr + E21_SAPROM + 2) != 0x1d) {
|
|
retval = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
/* Verify by making certain that there is a 8390 at there. */
|
|
outb(E8390_NODMA + E8390_STOP, ioaddr);
|
|
udelay(1); /* we want to delay one I/O cycle - which is 2MHz */
|
|
status = inb(ioaddr);
|
|
if (status != 0x21 && status != 0x23) {
|
|
retval = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
/* Read the station address PROM. */
|
|
for (i = 0; i < 6; i++)
|
|
station_addr[i] = inb(ioaddr + E21_SAPROM + i);
|
|
|
|
inb(ioaddr + E21_MEDIA); /* Point to media selection. */
|
|
outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */
|
|
|
|
if (ei_debug && version_printed++ == 0)
|
|
printk(version);
|
|
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %02X", station_addr[i]);
|
|
|
|
if (dev->irq < 2) {
|
|
int irqlist[] = {15,11,10,12,5,9,3,4}, i;
|
|
for (i = 0; i < 8; i++)
|
|
if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) {
|
|
dev->irq = irqlist[i];
|
|
break;
|
|
}
|
|
if (i >= 8) {
|
|
printk(" unable to get IRQ %d.\n", dev->irq);
|
|
retval = -EAGAIN;
|
|
goto out;
|
|
}
|
|
} else if (dev->irq == 2) /* Fixup luser bogosity: IRQ2 is really IRQ9 */
|
|
dev->irq = 9;
|
|
|
|
/* The 8390 is at the base address. */
|
|
dev->base_addr = ioaddr;
|
|
|
|
ei_status.name = "E2100";
|
|
ei_status.word16 = 1;
|
|
ei_status.tx_start_page = E21_TX_START_PG;
|
|
ei_status.rx_start_page = E21_RX_START_PG;
|
|
ei_status.stop_page = E21_RX_STOP_PG;
|
|
ei_status.saved_irq = dev->irq;
|
|
|
|
/* Check the media port used. The port can be passed in on the
|
|
low mem_end bits. */
|
|
if (dev->mem_end & 15)
|
|
dev->if_port = dev->mem_end & 7;
|
|
else {
|
|
dev->if_port = 0;
|
|
inb(ioaddr + E21_MEDIA); /* Turn automatic media detection on. */
|
|
for(i = 0; i < 6; i++)
|
|
if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) {
|
|
dev->if_port = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Never map in the E21 shared memory unless you are actively using it.
|
|
Also, the shared memory has effective only one setting -- spread all
|
|
over the 128K region! */
|
|
if (dev->mem_start == 0)
|
|
dev->mem_start = 0xd0000;
|
|
|
|
ei_status.mem = ioremap(dev->mem_start, 2*1024);
|
|
if (!ei_status.mem) {
|
|
printk("unable to remap memory\n");
|
|
retval = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
#ifdef notdef
|
|
/* These values are unused. The E2100 has a 2K window into the packet
|
|
buffer. The window can be set to start on any page boundary. */
|
|
ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
|
|
dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024;
|
|
#endif
|
|
|
|
printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq,
|
|
dev->if_port ? "secondary" : "primary", dev->mem_start);
|
|
|
|
ei_status.reset_8390 = &e21_reset_8390;
|
|
ei_status.block_input = &e21_block_input;
|
|
ei_status.block_output = &e21_block_output;
|
|
ei_status.get_8390_hdr = &e21_get_8390_hdr;
|
|
dev->open = &e21_open;
|
|
dev->stop = &e21_close;
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = ei_poll;
|
|
#endif
|
|
NS8390_init(dev, 0);
|
|
|
|
retval = register_netdev(dev);
|
|
if (retval)
|
|
goto out;
|
|
return 0;
|
|
out:
|
|
release_region(ioaddr, E21_IO_EXTENT);
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
e21_open(struct net_device *dev)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
int retval;
|
|
|
|
if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
|
|
return retval;
|
|
|
|
/* Set the interrupt line and memory base on the hardware. */
|
|
inb(ioaddr + E21_IRQ_LOW);
|
|
outb(0, ioaddr + E21_ASIC + (dev->irq & 7));
|
|
inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */
|
|
outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0)
|
|
+ (dev->if_port ? E21_ALT_IFPORT : 0));
|
|
inb(ioaddr + E21_MEM_BASE);
|
|
outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7));
|
|
|
|
ei_open(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
e21_reset_8390(struct net_device *dev)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
|
|
outb(0x01, ioaddr);
|
|
if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies);
|
|
ei_status.txing = 0;
|
|
|
|
/* Set up the ASIC registers, just in case something changed them. */
|
|
|
|
if (ei_debug > 1) printk("reset done\n");
|
|
return;
|
|
}
|
|
|
|
/* Grab the 8390 specific header. We put the 2k window so the header page
|
|
appears at the start of the shared memory. */
|
|
|
|
static void
|
|
e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
|
|
{
|
|
|
|
short ioaddr = dev->base_addr;
|
|
char __iomem *shared_mem = ei_status.mem;
|
|
|
|
mem_on(ioaddr, shared_mem, ring_page);
|
|
|
|
#ifdef notdef
|
|
/* Officially this is what we are doing, but the readl() is faster */
|
|
memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr));
|
|
#else
|
|
((unsigned int*)hdr)[0] = readl(shared_mem);
|
|
#endif
|
|
|
|
/* Turn off memory access: we would need to reprogram the window anyway. */
|
|
mem_off(ioaddr);
|
|
|
|
}
|
|
|
|
/* Block input and output are easy on shared memory ethercards.
|
|
The E21xx makes block_input() especially easy by wrapping the top
|
|
ring buffer to the bottom automatically. */
|
|
static void
|
|
e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
char __iomem *shared_mem = ei_status.mem;
|
|
|
|
mem_on(ioaddr, shared_mem, (ring_offset>>8));
|
|
|
|
memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count);
|
|
|
|
mem_off(ioaddr);
|
|
}
|
|
|
|
static void
|
|
e21_block_output(struct net_device *dev, int count, const unsigned char *buf,
|
|
int start_page)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
volatile char __iomem *shared_mem = ei_status.mem;
|
|
|
|
/* Set the shared memory window start by doing a read, with the low address
|
|
bits specifying the starting page. */
|
|
readb(shared_mem + start_page);
|
|
mem_on(ioaddr, shared_mem, start_page);
|
|
|
|
memcpy_toio(shared_mem, buf, count);
|
|
mem_off(ioaddr);
|
|
}
|
|
|
|
static int
|
|
e21_close(struct net_device *dev)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
|
|
if (ei_debug > 1)
|
|
printk("%s: Shutting down ethercard.\n", dev->name);
|
|
|
|
free_irq(dev->irq, dev);
|
|
dev->irq = ei_status.saved_irq;
|
|
|
|
/* Shut off the interrupt line and secondary interface. */
|
|
inb(ioaddr + E21_IRQ_LOW);
|
|
outb(0, ioaddr + E21_ASIC);
|
|
inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */
|
|
outb(0, ioaddr + E21_ASIC);
|
|
|
|
ei_close(dev);
|
|
|
|
/* Double-check that the memory has been turned off, because really
|
|
really bad things happen if it isn't. */
|
|
mem_off(ioaddr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
#ifdef MODULE
|
|
#define MAX_E21_CARDS 4 /* Max number of E21 cards per module */
|
|
static struct net_device *dev_e21[MAX_E21_CARDS];
|
|
static int io[MAX_E21_CARDS];
|
|
static int irq[MAX_E21_CARDS];
|
|
static int mem[MAX_E21_CARDS];
|
|
static int xcvr[MAX_E21_CARDS]; /* choose int. or ext. xcvr */
|
|
|
|
module_param_array(io, int, NULL, 0);
|
|
module_param_array(irq, int, NULL, 0);
|
|
module_param_array(mem, int, NULL, 0);
|
|
module_param_array(xcvr, int, NULL, 0);
|
|
MODULE_PARM_DESC(io, "I/O base address(es)");
|
|
MODULE_PARM_DESC(irq, "IRQ number(s)");
|
|
MODULE_PARM_DESC(mem, " memory base address(es)");
|
|
MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
|
|
MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* This is set up so that only a single autoprobe takes place per call.
|
|
ISA device autoprobes on a running machine are not recommended. */
|
|
|
|
int __init init_module(void)
|
|
{
|
|
struct net_device *dev;
|
|
int this_dev, found = 0;
|
|
|
|
for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
|
|
if (io[this_dev] == 0) {
|
|
if (this_dev != 0) break; /* only autoprobe 1st one */
|
|
printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n");
|
|
}
|
|
dev = alloc_ei_netdev();
|
|
if (!dev)
|
|
break;
|
|
dev->irq = irq[this_dev];
|
|
dev->base_addr = io[this_dev];
|
|
dev->mem_start = mem[this_dev];
|
|
dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */
|
|
if (do_e2100_probe(dev) == 0) {
|
|
dev_e21[found++] = dev;
|
|
continue;
|
|
}
|
|
free_netdev(dev);
|
|
printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]);
|
|
break;
|
|
}
|
|
if (found)
|
|
return 0;
|
|
return -ENXIO;
|
|
}
|
|
|
|
static void cleanup_card(struct net_device *dev)
|
|
{
|
|
/* NB: e21_close() handles free_irq */
|
|
iounmap(ei_status.mem);
|
|
release_region(dev->base_addr, E21_IO_EXTENT);
|
|
}
|
|
|
|
void __exit
|
|
cleanup_module(void)
|
|
{
|
|
int this_dev;
|
|
|
|
for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
|
|
struct net_device *dev = dev_e21[this_dev];
|
|
if (dev) {
|
|
unregister_netdev(dev);
|
|
cleanup_card(dev);
|
|
free_netdev(dev);
|
|
}
|
|
}
|
|
}
|
|
#endif /* MODULE */
|