mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-31 08:28:13 +00:00
78ad0b8408
Just define a local {claim,release}_dma_lock() implementation
for the floppy driver to use so we don't need to define and
export to modules the silly dma_spin_lock.
Signed-off-by: David S. Miller <davem@davemloft.net>
205 lines
8 KiB
C
205 lines
8 KiB
C
/* $Id: dma.h,v 1.21 2001/12/13 04:16:52 davem Exp $
|
|
* include/asm-sparc64/dma.h
|
|
*
|
|
* Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
|
|
*/
|
|
|
|
#ifndef _ASM_SPARC64_DMA_H
|
|
#define _ASM_SPARC64_DMA_H
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/sbus.h>
|
|
#include <asm/delay.h>
|
|
#include <asm/oplib.h>
|
|
|
|
/* These are irrelevant for Sparc DMA, but we leave it in so that
|
|
* things can compile.
|
|
*/
|
|
#define MAX_DMA_CHANNELS 8
|
|
#define DMA_MODE_READ 1
|
|
#define DMA_MODE_WRITE 2
|
|
#define MAX_DMA_ADDRESS (~0UL)
|
|
|
|
/* Useful constants */
|
|
#define SIZE_16MB (16*1024*1024)
|
|
#define SIZE_64K (64*1024)
|
|
|
|
/* SBUS DMA controller reg offsets */
|
|
#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
|
|
#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
|
|
#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
|
|
#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
|
|
|
|
/* DVMA chip revisions */
|
|
enum dvma_rev {
|
|
dvmarev0,
|
|
dvmaesc1,
|
|
dvmarev1,
|
|
dvmarev2,
|
|
dvmarev3,
|
|
dvmarevplus,
|
|
dvmahme
|
|
};
|
|
|
|
#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
|
|
|
|
/* Linux DMA information structure, filled during probe. */
|
|
struct sbus_dma {
|
|
struct sbus_dma *next;
|
|
struct sbus_dev *sdev;
|
|
void __iomem *regs;
|
|
|
|
/* Status, misc info */
|
|
int node; /* Prom node for this DMA device */
|
|
int running; /* Are we doing DMA now? */
|
|
int allocated; /* Are we "owned" by anyone yet? */
|
|
|
|
/* Transfer information. */
|
|
u32 addr; /* Start address of current transfer */
|
|
int nbytes; /* Size of current transfer */
|
|
int realbytes; /* For splitting up large transfers, etc. */
|
|
|
|
/* DMA revision */
|
|
enum dvma_rev revision;
|
|
};
|
|
|
|
extern struct sbus_dma *dma_chain;
|
|
|
|
/* Broken hardware... */
|
|
#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1)
|
|
#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
|
|
|
|
/* Main routines in dma.c */
|
|
extern void dvma_init(struct sbus_bus *);
|
|
|
|
/* Fields in the cond_reg register */
|
|
/* First, the version identification bits */
|
|
#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
|
|
#define DMA_VERS0 0x00000000 /* Sunray DMA version */
|
|
#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
|
|
#define DMA_VERS1 0x80000000 /* DMA rev 1 */
|
|
#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
|
|
#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
|
|
#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
|
|
|
|
#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
|
|
#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
|
|
#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
|
|
#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
|
|
#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
|
|
#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
|
|
#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
|
|
#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
|
|
#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
|
|
#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
|
|
#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
|
|
#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
|
|
#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
|
|
#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
|
|
#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
|
|
#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
|
|
#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
|
|
#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
|
|
#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
|
|
#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
|
|
#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
|
|
#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
|
|
#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
|
|
#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
|
|
#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
|
|
#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
|
|
#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
|
|
#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */
|
|
#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */
|
|
#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
|
|
#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
|
|
#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
|
|
#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
|
|
#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
|
|
#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
|
|
#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
|
|
#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
|
|
#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
|
|
#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
|
|
#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
|
|
#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
|
|
|
|
/* Values describing the burst-size property from the PROM */
|
|
#define DMA_BURST1 0x01
|
|
#define DMA_BURST2 0x02
|
|
#define DMA_BURST4 0x04
|
|
#define DMA_BURST8 0x08
|
|
#define DMA_BURST16 0x10
|
|
#define DMA_BURST32 0x20
|
|
#define DMA_BURST64 0x40
|
|
#define DMA_BURSTBITS 0x7f
|
|
|
|
/* Determine highest possible final transfer address given a base */
|
|
#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
|
|
|
|
/* Yes, I hack a lot of elisp in my spare time... */
|
|
#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
|
|
#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
|
|
#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
|
|
#define DMA_OFF(__regs) \
|
|
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
|
|
tmp &= ~DMA_ENABLE; \
|
|
sbus_writel(tmp, (__regs) + DMA_CSR); \
|
|
} while(0)
|
|
#define DMA_INTSOFF(__regs) \
|
|
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
|
|
tmp &= ~DMA_INT_ENAB; \
|
|
sbus_writel(tmp, (__regs) + DMA_CSR); \
|
|
} while(0)
|
|
#define DMA_INTSON(__regs) \
|
|
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
|
|
tmp |= DMA_INT_ENAB; \
|
|
sbus_writel(tmp, (__regs) + DMA_CSR); \
|
|
} while(0)
|
|
#define DMA_PUNTFIFO(__regs) \
|
|
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
|
|
tmp |= DMA_FIFO_INV; \
|
|
sbus_writel(tmp, (__regs) + DMA_CSR); \
|
|
} while(0)
|
|
#define DMA_SETSTART(__regs, __addr) \
|
|
sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
|
|
#define DMA_BEGINDMA_W(__regs) \
|
|
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
|
|
tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
|
|
sbus_writel(tmp, (__regs) + DMA_CSR); \
|
|
} while(0)
|
|
#define DMA_BEGINDMA_R(__regs) \
|
|
do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \
|
|
tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
|
|
tmp &= ~DMA_ST_WRITE; \
|
|
sbus_writel(tmp, (__regs) + DMA_CSR); \
|
|
} while(0)
|
|
|
|
/* For certain DMA chips, we need to disable ints upon irq entry
|
|
* and turn them back on when we are done. So in any ESP interrupt
|
|
* handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
|
|
* when leaving the handler. You have been warned...
|
|
*/
|
|
#define DMA_IRQ_ENTRY(dma, dregs) do { \
|
|
if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
|
|
} while (0)
|
|
|
|
#define DMA_IRQ_EXIT(dma, dregs) do { \
|
|
if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
|
|
} while(0)
|
|
|
|
#define for_each_dvma(dma) \
|
|
for((dma) = dma_chain; (dma); (dma) = (dma)->next)
|
|
|
|
/* From PCI */
|
|
|
|
#ifdef CONFIG_PCI
|
|
extern int isa_dma_bridge_buggy;
|
|
#else
|
|
#define isa_dma_bridge_buggy (0)
|
|
#endif
|
|
|
|
#endif /* !(_ASM_SPARC64_DMA_H) */
|