mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 08:58:07 +00:00
ff8abc2839
The Duckbill devices are small, pen-drive sized boards based on NXP's i.MX28 SoC. While the initial variants (Duckbill series) were equipped with a micro SD card slot only, the latest generation (Duckbill 2 series) have an additional internal eMMC onboard. To distinguish between both generations, a new device tree compatible string was introduced. To get the MAC address fixup applied, we need to check for this new string here, too. Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
466 lines
10 KiB
C
466 lines
10 KiB
C
/*
|
|
* Copyright 2012 Freescale Semiconductor, Inc.
|
|
* Copyright 2012 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk/mxs.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/irqchip/mxs.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/sys_soc.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/system_misc.h>
|
|
|
|
#include "pm.h"
|
|
|
|
/* MXS DIGCTL SAIF CLKMUX */
|
|
#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
|
|
#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
|
|
#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
|
|
#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
|
|
|
|
#define HW_DIGCTL_CHIPID 0x310
|
|
#define HW_DIGCTL_CHIPID_MASK (0xffff << 16)
|
|
#define HW_DIGCTL_REV_MASK 0xff
|
|
#define HW_DIGCTL_CHIPID_MX23 (0x3780 << 16)
|
|
#define HW_DIGCTL_CHIPID_MX28 (0x2800 << 16)
|
|
|
|
#define MXS_CHIP_REVISION_1_0 0x10
|
|
#define MXS_CHIP_REVISION_1_1 0x11
|
|
#define MXS_CHIP_REVISION_1_2 0x12
|
|
#define MXS_CHIP_REVISION_1_3 0x13
|
|
#define MXS_CHIP_REVISION_1_4 0x14
|
|
#define MXS_CHIP_REV_UNKNOWN 0xff
|
|
|
|
#define MXS_GPIO_NR(bank, nr) ((bank) * 32 + (nr))
|
|
|
|
#define MXS_SET_ADDR 0x4
|
|
#define MXS_CLR_ADDR 0x8
|
|
#define MXS_TOG_ADDR 0xc
|
|
|
|
static u32 chipid;
|
|
static u32 socid;
|
|
|
|
static void __iomem *reset_addr;
|
|
|
|
static inline void __mxs_setl(u32 mask, void __iomem *reg)
|
|
{
|
|
__raw_writel(mask, reg + MXS_SET_ADDR);
|
|
}
|
|
|
|
static inline void __mxs_clrl(u32 mask, void __iomem *reg)
|
|
{
|
|
__raw_writel(mask, reg + MXS_CLR_ADDR);
|
|
}
|
|
|
|
static inline void __mxs_togl(u32 mask, void __iomem *reg)
|
|
{
|
|
__raw_writel(mask, reg + MXS_TOG_ADDR);
|
|
}
|
|
|
|
#define OCOTP_WORD_OFFSET 0x20
|
|
#define OCOTP_WORD_COUNT 0x20
|
|
|
|
#define BM_OCOTP_CTRL_BUSY (1 << 8)
|
|
#define BM_OCOTP_CTRL_ERROR (1 << 9)
|
|
#define BM_OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
|
|
|
|
static DEFINE_MUTEX(ocotp_mutex);
|
|
static u32 ocotp_words[OCOTP_WORD_COUNT];
|
|
|
|
static const u32 *mxs_get_ocotp(void)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *ocotp_base;
|
|
int timeout = 0x400;
|
|
size_t i;
|
|
static int once;
|
|
|
|
if (once)
|
|
return ocotp_words;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
|
|
ocotp_base = of_iomap(np, 0);
|
|
WARN_ON(!ocotp_base);
|
|
|
|
mutex_lock(&ocotp_mutex);
|
|
|
|
/*
|
|
* clk_enable(hbus_clk) for ocotp can be skipped
|
|
* as it must be on when system is running.
|
|
*/
|
|
|
|
/* try to clear ERROR bit */
|
|
__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
|
|
|
|
/* check both BUSY and ERROR cleared */
|
|
while ((__raw_readl(ocotp_base) &
|
|
(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
|
|
cpu_relax();
|
|
|
|
if (unlikely(!timeout))
|
|
goto error_unlock;
|
|
|
|
/* open OCOTP banks for read */
|
|
__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
|
|
|
|
/* approximately wait 32 hclk cycles */
|
|
udelay(1);
|
|
|
|
/* poll BUSY bit becoming cleared */
|
|
timeout = 0x400;
|
|
while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
|
|
cpu_relax();
|
|
|
|
if (unlikely(!timeout))
|
|
goto error_unlock;
|
|
|
|
for (i = 0; i < OCOTP_WORD_COUNT; i++)
|
|
ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
|
|
i * 0x10);
|
|
|
|
/* close banks for power saving */
|
|
__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
|
|
|
|
once = 1;
|
|
|
|
mutex_unlock(&ocotp_mutex);
|
|
|
|
return ocotp_words;
|
|
|
|
error_unlock:
|
|
mutex_unlock(&ocotp_mutex);
|
|
pr_err("%s: timeout in reading OCOTP\n", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
enum mac_oui {
|
|
OUI_FSL,
|
|
OUI_DENX,
|
|
OUI_CRYSTALFONTZ,
|
|
OUI_I2SE,
|
|
OUI_ARMADEUS,
|
|
};
|
|
|
|
static void __init update_fec_mac_prop(enum mac_oui oui)
|
|
{
|
|
struct device_node *np, *from = NULL;
|
|
struct property *newmac;
|
|
const u32 *ocotp = mxs_get_ocotp();
|
|
u8 *macaddr;
|
|
u32 val;
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
|
|
if (!np)
|
|
return;
|
|
|
|
from = np;
|
|
|
|
if (of_get_property(np, "local-mac-address", NULL))
|
|
continue;
|
|
|
|
newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
|
|
if (!newmac)
|
|
return;
|
|
newmac->value = newmac + 1;
|
|
newmac->length = 6;
|
|
|
|
newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
|
|
if (!newmac->name) {
|
|
kfree(newmac);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* OCOTP only stores the last 4 octets for each mac address,
|
|
* so hard-code OUI here.
|
|
*/
|
|
macaddr = newmac->value;
|
|
switch (oui) {
|
|
case OUI_FSL:
|
|
macaddr[0] = 0x00;
|
|
macaddr[1] = 0x04;
|
|
macaddr[2] = 0x9f;
|
|
break;
|
|
case OUI_DENX:
|
|
macaddr[0] = 0xc0;
|
|
macaddr[1] = 0xe5;
|
|
macaddr[2] = 0x4e;
|
|
break;
|
|
case OUI_CRYSTALFONTZ:
|
|
macaddr[0] = 0x58;
|
|
macaddr[1] = 0xb9;
|
|
macaddr[2] = 0xe1;
|
|
break;
|
|
case OUI_I2SE:
|
|
macaddr[0] = 0x00;
|
|
macaddr[1] = 0x01;
|
|
macaddr[2] = 0x87;
|
|
break;
|
|
case OUI_ARMADEUS:
|
|
macaddr[0] = 0x00;
|
|
macaddr[1] = 0x1e;
|
|
macaddr[2] = 0xac;
|
|
break;
|
|
}
|
|
val = ocotp[i];
|
|
macaddr[3] = (val >> 16) & 0xff;
|
|
macaddr[4] = (val >> 8) & 0xff;
|
|
macaddr[5] = (val >> 0) & 0xff;
|
|
|
|
of_update_property(np, newmac);
|
|
}
|
|
}
|
|
|
|
static inline void enable_clk_enet_out(void)
|
|
{
|
|
struct clk *clk = clk_get_sys("enet_out", NULL);
|
|
|
|
if (!IS_ERR(clk))
|
|
clk_prepare_enable(clk);
|
|
}
|
|
|
|
static void __init imx28_evk_init(void)
|
|
{
|
|
update_fec_mac_prop(OUI_FSL);
|
|
|
|
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
|
|
}
|
|
|
|
static void __init imx28_apf28_init(void)
|
|
{
|
|
update_fec_mac_prop(OUI_ARMADEUS);
|
|
}
|
|
|
|
static int apx4devkit_phy_fixup(struct phy_device *phy)
|
|
{
|
|
phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
|
|
return 0;
|
|
}
|
|
|
|
static void __init apx4devkit_init(void)
|
|
{
|
|
enable_clk_enet_out();
|
|
|
|
if (IS_BUILTIN(CONFIG_PHYLIB))
|
|
phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
|
|
apx4devkit_phy_fixup);
|
|
}
|
|
|
|
static void __init crystalfontz_init(void)
|
|
{
|
|
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
|
}
|
|
|
|
static void __init duckbill_init(void)
|
|
{
|
|
update_fec_mac_prop(OUI_I2SE);
|
|
}
|
|
|
|
static void __init m28cu3_init(void)
|
|
{
|
|
update_fec_mac_prop(OUI_DENX);
|
|
}
|
|
|
|
static const char __init *mxs_get_soc_id(void)
|
|
{
|
|
struct device_node *np;
|
|
void __iomem *digctl_base;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
|
|
digctl_base = of_iomap(np, 0);
|
|
WARN_ON(!digctl_base);
|
|
|
|
chipid = readl(digctl_base + HW_DIGCTL_CHIPID);
|
|
socid = chipid & HW_DIGCTL_CHIPID_MASK;
|
|
|
|
iounmap(digctl_base);
|
|
of_node_put(np);
|
|
|
|
switch (socid) {
|
|
case HW_DIGCTL_CHIPID_MX23:
|
|
return "i.MX23";
|
|
case HW_DIGCTL_CHIPID_MX28:
|
|
return "i.MX28";
|
|
default:
|
|
return "Unknown";
|
|
}
|
|
}
|
|
|
|
static u32 __init mxs_get_cpu_rev(void)
|
|
{
|
|
u32 rev = chipid & HW_DIGCTL_REV_MASK;
|
|
|
|
switch (socid) {
|
|
case HW_DIGCTL_CHIPID_MX23:
|
|
switch (rev) {
|
|
case 0x0:
|
|
return MXS_CHIP_REVISION_1_0;
|
|
case 0x1:
|
|
return MXS_CHIP_REVISION_1_1;
|
|
case 0x2:
|
|
return MXS_CHIP_REVISION_1_2;
|
|
case 0x3:
|
|
return MXS_CHIP_REVISION_1_3;
|
|
case 0x4:
|
|
return MXS_CHIP_REVISION_1_4;
|
|
default:
|
|
return MXS_CHIP_REV_UNKNOWN;
|
|
}
|
|
case HW_DIGCTL_CHIPID_MX28:
|
|
switch (rev) {
|
|
case 0x0:
|
|
return MXS_CHIP_REVISION_1_1;
|
|
case 0x1:
|
|
return MXS_CHIP_REVISION_1_2;
|
|
default:
|
|
return MXS_CHIP_REV_UNKNOWN;
|
|
}
|
|
default:
|
|
return MXS_CHIP_REV_UNKNOWN;
|
|
}
|
|
}
|
|
|
|
static const char __init *mxs_get_revision(void)
|
|
{
|
|
u32 rev = mxs_get_cpu_rev();
|
|
|
|
if (rev != MXS_CHIP_REV_UNKNOWN)
|
|
return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
|
|
rev & 0xf);
|
|
else
|
|
return kasprintf(GFP_KERNEL, "%s", "Unknown");
|
|
}
|
|
|
|
#define MX23_CLKCTRL_RESET_OFFSET 0x120
|
|
#define MX28_CLKCTRL_RESET_OFFSET 0x1e0
|
|
|
|
static int __init mxs_restart_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
|
|
reset_addr = of_iomap(np, 0);
|
|
if (!reset_addr)
|
|
return -ENODEV;
|
|
|
|
if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
|
|
reset_addr += MX23_CLKCTRL_RESET_OFFSET;
|
|
else
|
|
reset_addr += MX28_CLKCTRL_RESET_OFFSET;
|
|
of_node_put(np);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init eukrea_mbmx283lc_init(void)
|
|
{
|
|
mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
|
|
}
|
|
|
|
static void __init mxs_machine_init(void)
|
|
{
|
|
struct device_node *root;
|
|
struct device *parent;
|
|
struct soc_device *soc_dev;
|
|
struct soc_device_attribute *soc_dev_attr;
|
|
int ret;
|
|
|
|
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
|
|
if (!soc_dev_attr)
|
|
return;
|
|
|
|
root = of_find_node_by_path("/");
|
|
ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
|
|
if (ret)
|
|
return;
|
|
|
|
soc_dev_attr->family = "Freescale MXS Family";
|
|
soc_dev_attr->soc_id = mxs_get_soc_id();
|
|
soc_dev_attr->revision = mxs_get_revision();
|
|
|
|
soc_dev = soc_device_register(soc_dev_attr);
|
|
if (IS_ERR(soc_dev)) {
|
|
kfree(soc_dev_attr->revision);
|
|
kfree(soc_dev_attr);
|
|
return;
|
|
}
|
|
|
|
parent = soc_device_to_device(soc_dev);
|
|
|
|
if (of_machine_is_compatible("fsl,imx28-evk"))
|
|
imx28_evk_init();
|
|
if (of_machine_is_compatible("armadeus,imx28-apf28"))
|
|
imx28_apf28_init();
|
|
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
|
|
apx4devkit_init();
|
|
else if (of_machine_is_compatible("crystalfontz,cfa10036"))
|
|
crystalfontz_init();
|
|
else if (of_machine_is_compatible("eukrea,mbmx283lc"))
|
|
eukrea_mbmx283lc_init();
|
|
else if (of_machine_is_compatible("i2se,duckbill") ||
|
|
of_machine_is_compatible("i2se,duckbill-2"))
|
|
duckbill_init();
|
|
else if (of_machine_is_compatible("msr,m28cu3"))
|
|
m28cu3_init();
|
|
|
|
of_platform_default_populate(NULL, NULL, parent);
|
|
|
|
mxs_restart_init();
|
|
}
|
|
|
|
#define MXS_CLKCTRL_RESET_CHIP (1 << 1)
|
|
|
|
/*
|
|
* Reset the system. It is called by machine_restart().
|
|
*/
|
|
static void mxs_restart(enum reboot_mode mode, const char *cmd)
|
|
{
|
|
if (reset_addr) {
|
|
/* reset the chip */
|
|
__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
|
|
|
|
pr_err("Failed to assert the chip reset\n");
|
|
|
|
/* Delay to allow the serial port to show the message */
|
|
mdelay(50);
|
|
}
|
|
|
|
/* We'll take a jump through zero as a poor second */
|
|
soft_restart(0);
|
|
}
|
|
|
|
static const char *const mxs_dt_compat[] __initconst = {
|
|
"fsl,imx28",
|
|
"fsl,imx23",
|
|
NULL,
|
|
};
|
|
|
|
DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
|
|
.handle_irq = icoll_handle_irq,
|
|
.init_machine = mxs_machine_init,
|
|
.init_late = mxs_pm_init,
|
|
.dt_compat = mxs_dt_compat,
|
|
.restart = mxs_restart,
|
|
MACHINE_END
|