linux-stable/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
Geert Uytterhoeven 4c7a7d5086 dt-bindings: net: ti,bluetooth: Document default max-speed
Document the default value of max-speed, as used by
linux/drivers/bluetooth/hci_ll.c.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/0c6a08c714aeb6dd96b5a54a45b0b5b1cfb49ad1.1635338283.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
2021-11-01 20:33:57 -05:00

92 lines
2.2 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments Bluetooth Chips
maintainers:
- David Lechner <david@lechnology.com>
description: |
This documents the binding structure and common properties for serial
attached TI Bluetooth devices. The following chips are included in this
binding:
* TI CC256x Bluetooth devices
* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
and GPS over what's called "shared transport". The shared transport is
standard BT HCI protocol with additional channels for the other functions.
TI WiLink devices also have a separate WiFi interface as described in
wireless/ti,wlcore.yaml.
This bindings follows the UART slave device binding in ../serial/serial.yaml.
properties:
compatible:
enum:
- ti,cc2560
- ti,wl1271-st
- ti,wl1273-st
- ti,wl1281-st
- ti,wl1283-st
- ti,wl1285-st
- ti,wl1801-st
- ti,wl1805-st
- ti,wl1807-st
- ti,wl1831-st
- ti,wl1835-st
- ti,wl1837-st
enable-gpios:
maxItems: 1
vio-supply:
description: Vio input supply (1.8V)
vbat-supply:
description: Vbat input supply (2.9-4.8V)
clocks:
maxItems: 1
clock-names:
items:
- const: ext_clock
max-speed:
default: 3000000
nvmem-cells:
maxItems: 1
description:
Nvmem data cell that contains a 6 byte BD address with the most
significant byte first (big-endian).
nvmem-cell-names:
items:
- const: bd-address
required:
- compatible
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
serial {
bluetooth {
compatible = "ti,wl1835-st";
enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
clocks = <&clk32k_wl18xx>;
clock-names = "ext_clock";
nvmem-cells = <&bd_address>;
nvmem-cell-names = "bd-address";
};
};