mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Venki Pallipadi](/assets/img/avatar_default.png)
Add another PCI ID for ICH7 force hpet. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
254 lines
6.3 KiB
C
254 lines
6.3 KiB
C
/*
|
|
* This file contains work-arounds for x86 and x86_64 platform bugs.
|
|
*/
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <asm/hpet.h>
|
|
|
|
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI)
|
|
|
|
static void __devinit quirk_intel_irqbalance(struct pci_dev *dev)
|
|
{
|
|
u8 config, rev;
|
|
u32 word;
|
|
|
|
/* BIOS may enable hardware IRQ balancing for
|
|
* E7520/E7320/E7525(revision ID 0x9 and below)
|
|
* based platforms.
|
|
* Disable SW irqbalance/affinity on those platforms.
|
|
*/
|
|
pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
|
|
if (rev > 0x9)
|
|
return;
|
|
|
|
/* enable access to config space*/
|
|
pci_read_config_byte(dev, 0xf4, &config);
|
|
pci_write_config_byte(dev, 0xf4, config|0x2);
|
|
|
|
/* read xTPR register */
|
|
raw_pci_ops->read(0, 0, 0x40, 0x4c, 2, &word);
|
|
|
|
if (!(word & (1 << 13))) {
|
|
printk(KERN_INFO "Intel E7520/7320/7525 detected. "
|
|
"Disabling irq balancing and affinity\n");
|
|
#ifdef CONFIG_IRQBALANCE
|
|
irqbalance_disable("");
|
|
#endif
|
|
noirqdebug_setup("");
|
|
#ifdef CONFIG_PROC_FS
|
|
no_irq_affinity = 1;
|
|
#endif
|
|
}
|
|
|
|
/* put back the original value for config space*/
|
|
if (!(config & 0x2))
|
|
pci_write_config_byte(dev, 0xf4, config);
|
|
}
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_intel_irqbalance);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_intel_irqbalance);
|
|
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_intel_irqbalance);
|
|
#endif
|
|
|
|
#if defined(CONFIG_HPET_TIMER)
|
|
unsigned long force_hpet_address;
|
|
|
|
static enum {
|
|
NONE_FORCE_HPET_RESUME,
|
|
OLD_ICH_FORCE_HPET_RESUME,
|
|
ICH_FORCE_HPET_RESUME
|
|
} force_hpet_resume_type;
|
|
|
|
static void __iomem *rcba_base;
|
|
|
|
static void ich_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (!force_hpet_address)
|
|
return;
|
|
|
|
if (rcba_base == NULL)
|
|
BUG();
|
|
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80)) {
|
|
/* HPET disabled in HPTC. Trying to enable */
|
|
writel(val | 0x80, rcba_base + 0x3404);
|
|
}
|
|
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80))
|
|
BUG();
|
|
else
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
|
|
return;
|
|
}
|
|
|
|
static void ich_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(rcba);
|
|
int err = 0;
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0xF0, &rcba);
|
|
rcba &= 0xFFFFC000;
|
|
if (rcba == 0) {
|
|
printk(KERN_DEBUG "RCBA disabled. Cannot force enable HPET\n");
|
|
return;
|
|
}
|
|
|
|
/* use bits 31:14, 16 kB aligned */
|
|
rcba_base = ioremap_nocache(rcba, 0x4000);
|
|
if (rcba_base == NULL) {
|
|
printk(KERN_DEBUG "ioremap failed. Cannot force enable HPET\n");
|
|
return;
|
|
}
|
|
|
|
/* read the Function Disable register, dword mode only */
|
|
val = readl(rcba_base + 0x3404);
|
|
|
|
if (val & 0x80) {
|
|
/* HPET is enabled in HPTC. Just not reported by BIOS */
|
|
val = val & 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
|
|
force_hpet_address);
|
|
iounmap(rcba_base);
|
|
return;
|
|
}
|
|
|
|
/* HPET disabled in HPTC. Trying to enable */
|
|
writel(val | 0x80, rcba_base + 0x3404);
|
|
|
|
val = readl(rcba_base + 0x3404);
|
|
if (!(val & 0x80)) {
|
|
err = 1;
|
|
} else {
|
|
val = val & 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
}
|
|
|
|
if (err) {
|
|
force_hpet_address = 0;
|
|
iounmap(rcba_base);
|
|
printk(KERN_DEBUG "Failed to force enable HPET\n");
|
|
} else {
|
|
force_hpet_resume_type = ICH_FORCE_HPET_RESUME;
|
|
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
|
|
force_hpet_address);
|
|
}
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31,
|
|
ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1,
|
|
ich_force_enable_hpet);
|
|
|
|
|
|
static struct pci_dev *cached_dev;
|
|
|
|
static void old_ich_force_hpet_resume(void)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(gen_cntl);
|
|
|
|
if (!force_hpet_address || !cached_dev)
|
|
return;
|
|
|
|
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
|
|
gen_cntl &= (~(0x7 << 15));
|
|
gen_cntl |= (0x4 << 15);
|
|
|
|
pci_write_config_dword(cached_dev, 0xD0, gen_cntl);
|
|
pci_read_config_dword(cached_dev, 0xD0, &gen_cntl);
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val == 0x4)
|
|
printk(KERN_DEBUG "Force enabled HPET at resume\n");
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
static void old_ich_force_enable_hpet(struct pci_dev *dev)
|
|
{
|
|
u32 val;
|
|
u32 uninitialized_var(gen_cntl);
|
|
|
|
if (hpet_address || force_hpet_address)
|
|
return;
|
|
|
|
pci_read_config_dword(dev, 0xD0, &gen_cntl);
|
|
/*
|
|
* Bit 17 is HPET enable bit.
|
|
* Bit 16:15 control the HPET base address.
|
|
*/
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val & 0x4) {
|
|
val &= 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
printk(KERN_DEBUG "HPET at base address 0x%lx\n",
|
|
force_hpet_address);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* HPET is disabled. Trying enabling at FED00000 and check
|
|
* whether it sticks
|
|
*/
|
|
gen_cntl &= (~(0x7 << 15));
|
|
gen_cntl |= (0x4 << 15);
|
|
pci_write_config_dword(dev, 0xD0, gen_cntl);
|
|
|
|
pci_read_config_dword(dev, 0xD0, &gen_cntl);
|
|
|
|
val = gen_cntl >> 15;
|
|
val &= 0x7;
|
|
if (val & 0x4) {
|
|
/* HPET is enabled in HPTC. Just not reported by BIOS */
|
|
val &= 0x3;
|
|
force_hpet_address = 0xFED00000 | (val << 12);
|
|
printk(KERN_DEBUG "Force enabled HPET at base address 0x%lx\n",
|
|
force_hpet_address);
|
|
cached_dev = dev;
|
|
force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME;
|
|
return;
|
|
}
|
|
|
|
printk(KERN_DEBUG "Failed to force enable HPET\n");
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,
|
|
old_ich_force_enable_hpet);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12,
|
|
old_ich_force_enable_hpet);
|
|
|
|
void force_hpet_resume(void)
|
|
{
|
|
switch (force_hpet_resume_type) {
|
|
case ICH_FORCE_HPET_RESUME:
|
|
return ich_force_hpet_resume();
|
|
|
|
case OLD_ICH_FORCE_HPET_RESUME:
|
|
return old_ich_force_hpet_resume();
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
#endif
|