mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Uwe Kleine-König](/assets/img/avatar_default.png)
Several drivers manually register a devm handler to disable their clk. Convert them to devm_clk_get_enabled(). Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
538 lines
15 KiB
C
538 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Fan Control HDL CORE driver
|
|
*
|
|
* Copyright 2019 Analog Devices Inc.
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/fpga/adi-axi-common.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
/* register map */
|
|
#define ADI_REG_RSTN 0x0080
|
|
#define ADI_REG_PWM_WIDTH 0x0084
|
|
#define ADI_REG_TACH_PERIOD 0x0088
|
|
#define ADI_REG_TACH_TOLERANCE 0x008c
|
|
#define ADI_REG_PWM_PERIOD 0x00c0
|
|
#define ADI_REG_TACH_MEASUR 0x00c4
|
|
#define ADI_REG_TEMPERATURE 0x00c8
|
|
#define ADI_REG_TEMP_00_H 0x0100
|
|
#define ADI_REG_TEMP_25_L 0x0104
|
|
#define ADI_REG_TEMP_25_H 0x0108
|
|
#define ADI_REG_TEMP_50_L 0x010c
|
|
#define ADI_REG_TEMP_50_H 0x0110
|
|
#define ADI_REG_TEMP_75_L 0x0114
|
|
#define ADI_REG_TEMP_75_H 0x0118
|
|
#define ADI_REG_TEMP_100_L 0x011c
|
|
|
|
#define ADI_REG_IRQ_MASK 0x0040
|
|
#define ADI_REG_IRQ_PENDING 0x0044
|
|
#define ADI_REG_IRQ_SRC 0x0048
|
|
|
|
/* IRQ sources */
|
|
#define ADI_IRQ_SRC_PWM_CHANGED BIT(0)
|
|
#define ADI_IRQ_SRC_TACH_ERR BIT(1)
|
|
#define ADI_IRQ_SRC_TEMP_INCREASE BIT(2)
|
|
#define ADI_IRQ_SRC_NEW_MEASUR BIT(3)
|
|
#define ADI_IRQ_SRC_MASK GENMASK(3, 0)
|
|
#define ADI_IRQ_MASK_OUT_ALL 0xFFFFFFFFU
|
|
|
|
#define SYSFS_PWM_MAX 255
|
|
|
|
struct axi_fan_control_data {
|
|
void __iomem *base;
|
|
struct device *hdev;
|
|
unsigned long clk_rate;
|
|
int irq;
|
|
/* pulses per revolution */
|
|
u32 ppr;
|
|
bool hw_pwm_req;
|
|
bool update_tacho_params;
|
|
u8 fan_fault;
|
|
};
|
|
|
|
static inline void axi_iowrite(const u32 val, const u32 reg,
|
|
const struct axi_fan_control_data *ctl)
|
|
{
|
|
iowrite32(val, ctl->base + reg);
|
|
}
|
|
|
|
static inline u32 axi_ioread(const u32 reg,
|
|
const struct axi_fan_control_data *ctl)
|
|
{
|
|
return ioread32(ctl->base + reg);
|
|
}
|
|
|
|
/*
|
|
* The core calculates the temperature as:
|
|
* T = /raw * 509.3140064 / 65535) - 280.2308787
|
|
*/
|
|
static ssize_t axi_fan_control_show(struct device *dev, struct device_attribute *da, char *buf)
|
|
{
|
|
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u32 temp = axi_ioread(attr->index, ctl);
|
|
|
|
temp = DIV_ROUND_CLOSEST_ULL(temp * 509314ULL, 65535) - 280230;
|
|
|
|
return sprintf(buf, "%u\n", temp);
|
|
}
|
|
|
|
static ssize_t axi_fan_control_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u32 temp;
|
|
int ret;
|
|
|
|
ret = kstrtou32(buf, 10, &temp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
temp = DIV_ROUND_CLOSEST_ULL((temp + 280230) * 65535ULL, 509314);
|
|
axi_iowrite(temp, attr->index, ctl);
|
|
|
|
return count;
|
|
}
|
|
|
|
static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
|
|
{
|
|
u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
|
|
u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
|
|
/*
|
|
* PWM_PERIOD is a RO register set by the core. It should never be 0.
|
|
* For now we are trusting the HW...
|
|
*/
|
|
return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
|
|
}
|
|
|
|
static int axi_fan_control_set_pwm_duty(const long val,
|
|
struct axi_fan_control_data *ctl)
|
|
{
|
|
u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
|
|
u32 new_width;
|
|
long __val = clamp_val(val, 0, SYSFS_PWM_MAX);
|
|
|
|
new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);
|
|
|
|
axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
|
|
{
|
|
const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
|
|
|
|
if (tach == 0)
|
|
/* should we return error, EAGAIN maybe? */
|
|
return 0;
|
|
/*
|
|
* The tacho period should be:
|
|
* TACH = 60/(ppr * rpm), where rpm is revolutions per second
|
|
* and ppr is pulses per revolution.
|
|
* Given the tacho period, we can multiply it by the input clock
|
|
* so that we know how many clocks we need to have this period.
|
|
* From this, we can derive the RPM value.
|
|
*/
|
|
return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
|
|
}
|
|
|
|
static int axi_fan_control_read_temp(struct device *dev, u32 attr, long *val)
|
|
{
|
|
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
|
long raw_temp;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
|
|
/*
|
|
* The formula for the temperature is:
|
|
* T = (ADC * 501.3743 / 2^bits) - 273.6777
|
|
* It's multiplied by 1000 to have millidegrees as
|
|
* specified by the hwmon sysfs interface.
|
|
*/
|
|
*val = ((raw_temp * 501374) >> 16) - 273677;
|
|
return 0;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_fan_control_read_fan(struct device *dev, u32 attr, long *val)
|
|
{
|
|
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_fan_fault:
|
|
*val = ctl->fan_fault;
|
|
/* clear it now */
|
|
ctl->fan_fault = 0;
|
|
return 0;
|
|
case hwmon_fan_input:
|
|
*val = axi_fan_control_get_fan_rpm(ctl);
|
|
return 0;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_fan_control_read_pwm(struct device *dev, u32 attr, long *val)
|
|
{
|
|
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_pwm_input:
|
|
*val = axi_fan_control_get_pwm_duty(ctl);
|
|
return 0;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
|
|
{
|
|
struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_pwm_input:
|
|
return axi_fan_control_set_pwm_duty(val, ctl);
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_fan_control_read_labels(struct device *dev,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel, const char **str)
|
|
{
|
|
switch (type) {
|
|
case hwmon_fan:
|
|
*str = "FAN";
|
|
return 0;
|
|
case hwmon_temp:
|
|
*str = "SYSMON4";
|
|
return 0;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_fan_control_read(struct device *dev,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_fan:
|
|
return axi_fan_control_read_fan(dev, attr, val);
|
|
case hwmon_pwm:
|
|
return axi_fan_control_read_pwm(dev, attr, val);
|
|
case hwmon_temp:
|
|
return axi_fan_control_read_temp(dev, attr, val);
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int axi_fan_control_write(struct device *dev,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_pwm:
|
|
return axi_fan_control_write_pwm(dev, attr, val);
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t axi_fan_control_fan_is_visible(const u32 attr)
|
|
{
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
case hwmon_fan_fault:
|
|
case hwmon_fan_label:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
|
|
{
|
|
switch (attr) {
|
|
case hwmon_pwm_input:
|
|
return 0644;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static umode_t axi_fan_control_temp_is_visible(const u32 attr)
|
|
{
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_label:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static umode_t axi_fan_control_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_fan:
|
|
return axi_fan_control_fan_is_visible(attr);
|
|
case hwmon_pwm:
|
|
return axi_fan_control_pwm_is_visible(attr);
|
|
case hwmon_temp:
|
|
return axi_fan_control_temp_is_visible(attr);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This core has two main ways of changing the PWM duty cycle. It is done,
|
|
* either by a request from userspace (writing on pwm1_input) or by the
|
|
* core itself. When the change is done by the core, it will use predefined
|
|
* parameters to evaluate the tach signal and, on that case we cannot set them.
|
|
* On the other hand, when the request is done by the user, with some arbitrary
|
|
* value that the core does not now about, we have to provide the tach
|
|
* parameters so that, the core can evaluate the signal. On the IRQ handler we
|
|
* distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
|
|
* us that the CORE requested a new duty cycle. After this, there is 5s delay
|
|
* on which the core waits for the fan rotation speed to stabilize. After this
|
|
* we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
|
|
* the tach parameters or not on the next tach measurement cycle (corresponding
|
|
* already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
|
|
*/
|
|
static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
|
|
{
|
|
struct axi_fan_control_data *ctl = (struct axi_fan_control_data *)data;
|
|
u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
|
|
u32 clear_mask;
|
|
|
|
if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
|
|
/* hardware requested a new pwm */
|
|
ctl->hw_pwm_req = true;
|
|
|
|
if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
|
|
/*
|
|
* if the pwm changes on behalf of software,
|
|
* we need to provide new tacho parameters to the core.
|
|
* Wait for the next measurement for that...
|
|
*/
|
|
if (!ctl->hw_pwm_req) {
|
|
ctl->update_tacho_params = true;
|
|
} else {
|
|
ctl->hw_pwm_req = false;
|
|
hwmon_notify_event(ctl->hdev, hwmon_pwm,
|
|
hwmon_pwm_input, 0);
|
|
}
|
|
}
|
|
|
|
if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
|
|
if (ctl->update_tacho_params) {
|
|
u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
|
|
/* get 25% tolerance */
|
|
u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
|
|
|
|
/* set new tacho parameters */
|
|
axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
|
|
axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
|
|
ctl->update_tacho_params = false;
|
|
}
|
|
}
|
|
|
|
if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
|
|
ctl->fan_fault = 1;
|
|
|
|
/* clear all interrupts */
|
|
clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
|
|
axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int axi_fan_control_init(struct axi_fan_control_data *ctl,
|
|
const struct device_node *np)
|
|
{
|
|
int ret;
|
|
|
|
/* get fan pulses per revolution */
|
|
ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 1, 2 and 4 are the typical and accepted values */
|
|
if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
|
|
return -EINVAL;
|
|
/*
|
|
* Enable all IRQs
|
|
*/
|
|
axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
|
|
~(ADI_IRQ_SRC_NEW_MEASUR | ADI_IRQ_SRC_TACH_ERR |
|
|
ADI_IRQ_SRC_PWM_CHANGED | ADI_IRQ_SRC_TEMP_INCREASE),
|
|
ADI_REG_IRQ_MASK, ctl);
|
|
|
|
/* bring the device out of reset */
|
|
axi_iowrite(0x01, ADI_REG_RSTN, ctl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct hwmon_channel_info *axi_fan_control_info[] = {
|
|
HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
|
|
HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL),
|
|
HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops axi_fan_control_hwmon_ops = {
|
|
.is_visible = axi_fan_control_is_visible,
|
|
.read = axi_fan_control_read,
|
|
.write = axi_fan_control_write,
|
|
.read_string = axi_fan_control_read_labels,
|
|
};
|
|
|
|
static const struct hwmon_chip_info axi_chip_info = {
|
|
.ops = &axi_fan_control_hwmon_ops,
|
|
.info = axi_fan_control_info,
|
|
};
|
|
|
|
/* temperature threshold below which PWM should be 0% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp_hyst, axi_fan_control, ADI_REG_TEMP_00_H);
|
|
/* temperature threshold above which PWM should be 25% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, axi_fan_control, ADI_REG_TEMP_25_L);
|
|
/* temperature threshold below which PWM should be 25% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp_hyst, axi_fan_control, ADI_REG_TEMP_25_H);
|
|
/* temperature threshold above which PWM should be 50% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, axi_fan_control, ADI_REG_TEMP_50_L);
|
|
/* temperature threshold below which PWM should be 50% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp_hyst, axi_fan_control, ADI_REG_TEMP_50_H);
|
|
/* temperature threshold above which PWM should be 75% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, axi_fan_control, ADI_REG_TEMP_75_L);
|
|
/* temperature threshold below which PWM should be 75% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp_hyst, axi_fan_control, ADI_REG_TEMP_75_H);
|
|
/* temperature threshold above which PWM should be 100% */
|
|
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, axi_fan_control, ADI_REG_TEMP_100_L);
|
|
|
|
static struct attribute *axi_fan_control_attrs[] = {
|
|
&sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
ATTRIBUTE_GROUPS(axi_fan_control);
|
|
|
|
static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
|
|
|
|
static const struct of_device_id axi_fan_control_of_match[] = {
|
|
{ .compatible = "adi,axi-fan-control-1.00.a",
|
|
.data = (void *)&version_1_0_0},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
|
|
|
|
static int axi_fan_control_probe(struct platform_device *pdev)
|
|
{
|
|
struct axi_fan_control_data *ctl;
|
|
struct clk *clk;
|
|
const struct of_device_id *id;
|
|
const char *name = "axi_fan_control";
|
|
u32 version;
|
|
int ret;
|
|
|
|
id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
|
|
if (!id)
|
|
return -EINVAL;
|
|
|
|
ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
|
|
if (!ctl)
|
|
return -ENOMEM;
|
|
|
|
ctl->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(ctl->base))
|
|
return PTR_ERR(ctl->base);
|
|
|
|
clk = devm_clk_get_enabled(&pdev->dev, NULL);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
ctl->clk_rate = clk_get_rate(clk);
|
|
if (!ctl->clk_rate)
|
|
return -EINVAL;
|
|
|
|
version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
|
|
if (ADI_AXI_PCORE_VER_MAJOR(version) !=
|
|
ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data))) {
|
|
dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
|
|
ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data)),
|
|
ADI_AXI_PCORE_VER_MINOR((*(u32 *)id->data)),
|
|
ADI_AXI_PCORE_VER_PATCH((*(u32 *)id->data)),
|
|
ADI_AXI_PCORE_VER_MAJOR(version),
|
|
ADI_AXI_PCORE_VER_MINOR(version),
|
|
ADI_AXI_PCORE_VER_PATCH(version));
|
|
return -ENODEV;
|
|
}
|
|
|
|
ctl->irq = platform_get_irq(pdev, 0);
|
|
if (ctl->irq < 0)
|
|
return ctl->irq;
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
|
|
axi_fan_control_irq_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
|
|
pdev->driver_override, ctl);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to request an irq, %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = axi_fan_control_init(ctl, pdev->dev.of_node);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to initialize device\n");
|
|
return ret;
|
|
}
|
|
|
|
ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
|
|
name,
|
|
ctl,
|
|
&axi_chip_info,
|
|
axi_fan_control_groups);
|
|
|
|
return PTR_ERR_OR_ZERO(ctl->hdev);
|
|
}
|
|
|
|
static struct platform_driver axi_fan_control_driver = {
|
|
.driver = {
|
|
.name = "axi_fan_control_driver",
|
|
.of_match_table = axi_fan_control_of_match,
|
|
},
|
|
.probe = axi_fan_control_probe,
|
|
};
|
|
module_platform_driver(axi_fan_control_driver);
|
|
|
|
MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
|
|
MODULE_LICENSE("GPL");
|