linux-stable/drivers/hwmon/lm70.c
Christian Lamparter cd929672a9 hwmon: (lm70) Add ti,tmp125 support
The TMP125 is a 2 degree Celsius accurate Digital
Temperature Sensor with a SPI interface.

The temperature register is a 16-bit, read-only register.
The MSB (Bit 15) is a leading zero and never set. Bits 14
to 5 are the 1+9 temperature data bits in a two's
complement format. Bits 4 to 0 are useless copies of
Bit 5 value and therefore ignored.

This was tested on a Aerohive HiveAP-350.

Bonus: lm70 supports TMP122/TMP124 as well.
I added them to the Kconfig module description.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-02-27 17:03:19 -08:00

222 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* lm70.c
*
* The LM70 is a temperature sensor chip from National Semiconductor (NS).
* Copyright (C) 2006 Kaiwan N Billimoria <kaiwan@designergraphix.com>
*
* The LM70 communicates with a host processor via an SPI/Microwire Bus
* interface. The complete datasheet is available at National's website
* here:
* http://www.national.com/pf/LM/LM70.html
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/hwmon.h>
#include <linux/mutex.h>
#include <linux/mod_devicetable.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#define DRVNAME "lm70"
#define LM70_CHIP_LM70 0 /* original NS LM70 */
#define LM70_CHIP_TMP121 1 /* TI TMP121/TMP123 */
#define LM70_CHIP_LM71 2 /* NS LM71 */
#define LM70_CHIP_LM74 3 /* NS LM74 */
#define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */
#define LM70_CHIP_TMP125 5 /* TI TMP125 */
struct lm70 {
struct spi_device *spi;
struct mutex lock;
unsigned int chip;
};
/* sysfs hook function */
static ssize_t temp1_input_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct lm70 *p_lm70 = dev_get_drvdata(dev);
struct spi_device *spi = p_lm70->spi;
int status, val = 0;
u8 rxbuf[2];
s16 raw = 0;
if (mutex_lock_interruptible(&p_lm70->lock))
return -ERESTARTSYS;
/*
* spi_read() requires a DMA-safe buffer; so we use
* spi_write_then_read(), transmitting 0 bytes.
*/
status = spi_write_then_read(spi, NULL, 0, &rxbuf[0], 2);
if (status < 0) {
dev_warn(dev, "spi_write_then_read failed with status %d\n",
status);
goto out;
}
raw = (rxbuf[0] << 8) + rxbuf[1];
dev_dbg(dev, "rxbuf[0] : 0x%02x rxbuf[1] : 0x%02x raw=0x%04x\n",
rxbuf[0], rxbuf[1], raw);
/*
* LM70:
* The "raw" temperature read into rxbuf[] is a 16-bit signed 2's
* complement value. Only the MSB 11 bits (1 sign + 10 temperature
* bits) are meaningful; the LSB 5 bits are to be discarded.
* See the datasheet.
*
* Further, each bit represents 0.25 degrees Celsius; so, multiply
* by 0.25. Also multiply by 1000 to represent in millidegrees
* Celsius.
* So it's equivalent to multiplying by 0.25 * 1000 = 250.
*
* LM74 and TMP121/TMP122/TMP123/TMP124:
* 13 bits of 2's complement data, discard LSB 3 bits,
* resolution 0.0625 degrees celsius.
*
* LM71:
* 14 bits of 2's complement data, discard LSB 2 bits,
* resolution 0.0312 degrees celsius.
*
* TMP125:
* MSB/D15 is a leading zero. D14 is the sign-bit. This is
* followed by 9 temperature bits (D13..D5) in 2's complement
* data format with a resolution of 0.25 degrees celsius per unit.
* LSB 5 bits (D4..D0) share the same value as D5 and get discarded.
*/
switch (p_lm70->chip) {
case LM70_CHIP_LM70:
val = ((int)raw / 32) * 250;
break;
case LM70_CHIP_TMP121:
case LM70_CHIP_TMP122:
case LM70_CHIP_LM74:
val = ((int)raw / 8) * 625 / 10;
break;
case LM70_CHIP_LM71:
val = ((int)raw / 4) * 3125 / 100;
break;
case LM70_CHIP_TMP125:
val = (sign_extend32(raw, 14) / 32) * 250;
break;
}
status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
out:
mutex_unlock(&p_lm70->lock);
return status;
}
static DEVICE_ATTR_RO(temp1_input);
static struct attribute *lm70_attrs[] = {
&dev_attr_temp1_input.attr,
NULL
};
ATTRIBUTE_GROUPS(lm70);
/*----------------------------------------------------------------------*/
#ifdef CONFIG_OF
static const struct of_device_id lm70_of_ids[] = {
{
.compatible = "ti,lm70",
.data = (void *) LM70_CHIP_LM70,
},
{
.compatible = "ti,tmp121",
.data = (void *) LM70_CHIP_TMP121,
},
{
.compatible = "ti,tmp122",
.data = (void *) LM70_CHIP_TMP122,
},
{
.compatible = "ti,tmp125",
.data = (void *) LM70_CHIP_TMP125,
},
{
.compatible = "ti,lm71",
.data = (void *) LM70_CHIP_LM71,
},
{
.compatible = "ti,lm74",
.data = (void *) LM70_CHIP_LM74,
},
{},
};
MODULE_DEVICE_TABLE(of, lm70_of_ids);
#endif
static int lm70_probe(struct spi_device *spi)
{
struct device *hwmon_dev;
struct lm70 *p_lm70;
int chip;
if (dev_fwnode(&spi->dev))
chip = (int)(uintptr_t)device_get_match_data(&spi->dev);
else
chip = spi_get_device_id(spi)->driver_data;
/* signaling is SPI_MODE_0 */
if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0)
return -EINVAL;
/* NOTE: we assume 8-bit words, and convert to 16 bits manually */
p_lm70 = devm_kzalloc(&spi->dev, sizeof(*p_lm70), GFP_KERNEL);
if (!p_lm70)
return -ENOMEM;
mutex_init(&p_lm70->lock);
p_lm70->chip = chip;
p_lm70->spi = spi;
hwmon_dev = devm_hwmon_device_register_with_groups(&spi->dev,
spi->modalias,
p_lm70, lm70_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct spi_device_id lm70_ids[] = {
{ "lm70", LM70_CHIP_LM70 },
{ "tmp121", LM70_CHIP_TMP121 },
{ "tmp122", LM70_CHIP_TMP122 },
{ "tmp125", LM70_CHIP_TMP125 },
{ "lm71", LM70_CHIP_LM71 },
{ "lm74", LM70_CHIP_LM74 },
{ },
};
MODULE_DEVICE_TABLE(spi, lm70_ids);
static struct spi_driver lm70_driver = {
.driver = {
.name = "lm70",
.of_match_table = of_match_ptr(lm70_of_ids),
},
.id_table = lm70_ids,
.probe = lm70_probe,
};
module_spi_driver(lm70_driver);
MODULE_AUTHOR("Kaiwan N Billimoria");
MODULE_DESCRIPTION("NS LM70 and compatibles Linux driver");
MODULE_LICENSE("GPL");