mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Matti Vaittinen](/assets/img/avatar_default.png)
The dev_err_probe() has (at least) following benefits over dev_err() when printing an error print for a failed function call at a device driver probe: - Omit error level print if error is 'EPRBE_DEFER' - Standardized print format for returned error - return the error value allowing shortening calls like: if (ret) { dev_err(...); return ret; } to if (ret) return dev_err_probe(...); Convert the ROHM BD71828, ROHM BD71815 and ROHM BD9576 regulator drivers to use the dev_err_probe() when returned error is not hard-coded constant. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/0b644da4a8f58558ffe474d2593f85c46de2f965.1669203610.git.mazziesaccount@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
1139 lines
31 KiB
C
1139 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (C) 2020 ROHM Semiconductors
|
|
// ROHM BD9576MUF/BD9573MUF regulator driver
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/rohm-bd957x.h>
|
|
#include <linux/mfd/rohm-generic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#define BD957X_VOUTS1_VOLT 3300000
|
|
#define BD957X_VOUTS4_BASE_VOLT 1030000
|
|
#define BD957X_VOUTS34_NUM_VOLT 32
|
|
|
|
#define BD9576_THERM_IRQ_MASK_TW BIT(5)
|
|
#define BD9576_xVD_IRQ_MASK_VOUTL1 BIT(5)
|
|
#define BD9576_UVD_IRQ_MASK_VOUTS1_OCW BIT(6)
|
|
#define BD9576_xVD_IRQ_MASK_VOUT1TO4 0x0F
|
|
|
|
static const unsigned int vout1_volt_table[] = {
|
|
5000000, 4900000, 4800000, 4700000, 4600000,
|
|
4500000, 4500000, 4500000, 5000000, 5100000,
|
|
5200000, 5300000, 5400000, 5500000, 5500000,
|
|
5500000
|
|
};
|
|
|
|
static const unsigned int vout2_volt_table[] = {
|
|
1800000, 1780000, 1760000, 1740000, 1720000,
|
|
1700000, 1680000, 1660000, 1800000, 1820000,
|
|
1840000, 1860000, 1880000, 1900000, 1920000,
|
|
1940000
|
|
};
|
|
|
|
static const unsigned int voutl1_volt_table[] = {
|
|
2500000, 2540000, 2580000, 2620000, 2660000,
|
|
2700000, 2740000, 2780000, 2500000, 2460000,
|
|
2420000, 2380000, 2340000, 2300000, 2260000,
|
|
2220000
|
|
};
|
|
|
|
static const struct linear_range vout1_xvd_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(225000, 0x01, 0x2b, 0),
|
|
REGULATOR_LINEAR_RANGE(225000, 0x2c, 0x54, 5000),
|
|
REGULATOR_LINEAR_RANGE(425000, 0x55, 0x7f, 0),
|
|
};
|
|
|
|
static const struct linear_range vout234_xvd_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(17000, 0x01, 0x0f, 0),
|
|
REGULATOR_LINEAR_RANGE(17000, 0x10, 0x6d, 1000),
|
|
REGULATOR_LINEAR_RANGE(110000, 0x6e, 0x7f, 0),
|
|
};
|
|
|
|
static const struct linear_range voutL1_xvd_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(34000, 0x01, 0x0f, 0),
|
|
REGULATOR_LINEAR_RANGE(34000, 0x10, 0x6d, 2000),
|
|
REGULATOR_LINEAR_RANGE(220000, 0x6e, 0x7f, 0),
|
|
};
|
|
|
|
static struct linear_range voutS1_ocw_ranges_internal[] = {
|
|
REGULATOR_LINEAR_RANGE(200000, 0x01, 0x04, 0),
|
|
REGULATOR_LINEAR_RANGE(250000, 0x05, 0x18, 50000),
|
|
REGULATOR_LINEAR_RANGE(1200000, 0x19, 0x3f, 0),
|
|
};
|
|
|
|
static struct linear_range voutS1_ocw_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(50000, 0x01, 0x04, 0),
|
|
REGULATOR_LINEAR_RANGE(60000, 0x05, 0x18, 10000),
|
|
REGULATOR_LINEAR_RANGE(250000, 0x19, 0x3f, 0),
|
|
};
|
|
|
|
static struct linear_range voutS1_ocp_ranges_internal[] = {
|
|
REGULATOR_LINEAR_RANGE(300000, 0x01, 0x06, 0),
|
|
REGULATOR_LINEAR_RANGE(350000, 0x7, 0x1b, 50000),
|
|
REGULATOR_LINEAR_RANGE(1350000, 0x1c, 0x3f, 0),
|
|
};
|
|
|
|
static struct linear_range voutS1_ocp_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(70000, 0x01, 0x06, 0),
|
|
REGULATOR_LINEAR_RANGE(80000, 0x7, 0x1b, 10000),
|
|
REGULATOR_LINEAR_RANGE(280000, 0x1c, 0x3f, 0),
|
|
};
|
|
|
|
struct bd957x_regulator_data {
|
|
struct regulator_desc desc;
|
|
int base_voltage;
|
|
struct regulator_dev *rdev;
|
|
int ovd_notif;
|
|
int uvd_notif;
|
|
int temp_notif;
|
|
int ovd_err;
|
|
int uvd_err;
|
|
int temp_err;
|
|
const struct linear_range *xvd_ranges;
|
|
int num_xvd_ranges;
|
|
bool oc_supported;
|
|
unsigned int ovd_reg;
|
|
unsigned int uvd_reg;
|
|
unsigned int xvd_mask;
|
|
unsigned int ocp_reg;
|
|
unsigned int ocp_mask;
|
|
unsigned int ocw_reg;
|
|
unsigned int ocw_mask;
|
|
unsigned int ocw_rfet;
|
|
};
|
|
|
|
#define BD9576_NUM_REGULATORS 6
|
|
#define BD9576_NUM_OVD_REGULATORS 5
|
|
|
|
struct bd957x_data {
|
|
struct bd957x_regulator_data regulator_data[BD9576_NUM_REGULATORS];
|
|
struct regmap *regmap;
|
|
struct delayed_work therm_irq_suppress;
|
|
struct delayed_work ovd_irq_suppress;
|
|
struct delayed_work uvd_irq_suppress;
|
|
unsigned int therm_irq;
|
|
unsigned int ovd_irq;
|
|
unsigned int uvd_irq;
|
|
spinlock_t err_lock;
|
|
int regulator_global_err;
|
|
};
|
|
|
|
static int bd957x_vout34_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
int multiplier = selector & desc->vsel_mask & 0x7f;
|
|
int tune;
|
|
|
|
/* VOUT3 and 4 has 10mV step */
|
|
tune = multiplier * 10000;
|
|
|
|
if (!(selector & 0x80))
|
|
return desc->fixed_uV - tune;
|
|
|
|
return desc->fixed_uV + tune;
|
|
}
|
|
|
|
static int bd957x_list_voltage(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
int index = selector & desc->vsel_mask & 0x7f;
|
|
|
|
if (!(selector & 0x80))
|
|
index += desc->n_voltages/2;
|
|
|
|
if (index >= desc->n_voltages)
|
|
return -EINVAL;
|
|
|
|
return desc->volt_table[index];
|
|
}
|
|
|
|
static void bd9576_fill_ovd_flags(struct bd957x_regulator_data *data,
|
|
bool warn)
|
|
{
|
|
if (warn) {
|
|
data->ovd_notif = REGULATOR_EVENT_OVER_VOLTAGE_WARN;
|
|
data->ovd_err = REGULATOR_ERROR_OVER_VOLTAGE_WARN;
|
|
} else {
|
|
data->ovd_notif = REGULATOR_EVENT_REGULATION_OUT;
|
|
data->ovd_err = REGULATOR_ERROR_REGULATION_OUT;
|
|
}
|
|
}
|
|
|
|
static void bd9576_fill_ocp_flags(struct bd957x_regulator_data *data,
|
|
bool warn)
|
|
{
|
|
if (warn) {
|
|
data->uvd_notif = REGULATOR_EVENT_OVER_CURRENT_WARN;
|
|
data->uvd_err = REGULATOR_ERROR_OVER_CURRENT_WARN;
|
|
} else {
|
|
data->uvd_notif = REGULATOR_EVENT_OVER_CURRENT;
|
|
data->uvd_err = REGULATOR_ERROR_OVER_CURRENT;
|
|
}
|
|
}
|
|
|
|
static void bd9576_fill_uvd_flags(struct bd957x_regulator_data *data,
|
|
bool warn)
|
|
{
|
|
if (warn) {
|
|
data->uvd_notif = REGULATOR_EVENT_UNDER_VOLTAGE_WARN;
|
|
data->uvd_err = REGULATOR_ERROR_UNDER_VOLTAGE_WARN;
|
|
} else {
|
|
data->uvd_notif = REGULATOR_EVENT_UNDER_VOLTAGE;
|
|
data->uvd_err = REGULATOR_ERROR_UNDER_VOLTAGE;
|
|
}
|
|
}
|
|
|
|
static void bd9576_fill_temp_flags(struct bd957x_regulator_data *data,
|
|
bool enable, bool warn)
|
|
{
|
|
if (!enable) {
|
|
data->temp_notif = 0;
|
|
data->temp_err = 0;
|
|
} else if (warn) {
|
|
data->temp_notif = REGULATOR_EVENT_OVER_TEMP_WARN;
|
|
data->temp_err = REGULATOR_ERROR_OVER_TEMP_WARN;
|
|
} else {
|
|
data->temp_notif = REGULATOR_EVENT_OVER_TEMP;
|
|
data->temp_err = REGULATOR_ERROR_OVER_TEMP;
|
|
}
|
|
}
|
|
|
|
static int bd9576_set_limit(const struct linear_range *r, int num_ranges,
|
|
struct regmap *regmap, int reg, int mask, int lim)
|
|
{
|
|
int ret;
|
|
bool found;
|
|
int sel = 0;
|
|
|
|
if (lim) {
|
|
|
|
ret = linear_range_get_selector_low_array(r, num_ranges,
|
|
lim, &sel, &found);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!found)
|
|
dev_warn(regmap_get_device(regmap),
|
|
"limit %d out of range. Setting lower\n",
|
|
lim);
|
|
}
|
|
|
|
return regmap_update_bits(regmap, reg, mask, sel);
|
|
}
|
|
|
|
static bool check_ocp_flag_mismatch(struct regulator_dev *rdev, int severity,
|
|
struct bd957x_regulator_data *r)
|
|
{
|
|
if ((severity == REGULATOR_SEVERITY_ERR &&
|
|
r->uvd_notif != REGULATOR_EVENT_OVER_CURRENT) ||
|
|
(severity == REGULATOR_SEVERITY_WARN &&
|
|
r->uvd_notif != REGULATOR_EVENT_OVER_CURRENT_WARN)) {
|
|
dev_warn(rdev_get_dev(rdev),
|
|
"Can't support both OCP WARN and ERR\n");
|
|
/* Do not overwrite ERR config with WARN */
|
|
if (severity == REGULATOR_SEVERITY_WARN)
|
|
return true;
|
|
|
|
bd9576_fill_ocp_flags(r, 0);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool check_uvd_flag_mismatch(struct regulator_dev *rdev, int severity,
|
|
struct bd957x_regulator_data *r)
|
|
{
|
|
if ((severity == REGULATOR_SEVERITY_ERR &&
|
|
r->uvd_notif != REGULATOR_EVENT_UNDER_VOLTAGE) ||
|
|
(severity == REGULATOR_SEVERITY_WARN &&
|
|
r->uvd_notif != REGULATOR_EVENT_UNDER_VOLTAGE_WARN)) {
|
|
dev_warn(rdev_get_dev(rdev),
|
|
"Can't support both UVD WARN and ERR\n");
|
|
if (severity == REGULATOR_SEVERITY_WARN)
|
|
return true;
|
|
|
|
bd9576_fill_uvd_flags(r, 0);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool check_ovd_flag_mismatch(struct regulator_dev *rdev, int severity,
|
|
struct bd957x_regulator_data *r)
|
|
{
|
|
if ((severity == REGULATOR_SEVERITY_ERR &&
|
|
r->ovd_notif != REGULATOR_EVENT_REGULATION_OUT) ||
|
|
(severity == REGULATOR_SEVERITY_WARN &&
|
|
r->ovd_notif != REGULATOR_EVENT_OVER_VOLTAGE_WARN)) {
|
|
dev_warn(rdev_get_dev(rdev),
|
|
"Can't support both OVD WARN and ERR\n");
|
|
if (severity == REGULATOR_SEVERITY_WARN)
|
|
return true;
|
|
|
|
bd9576_fill_ovd_flags(r, 0);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool check_temp_flag_mismatch(struct regulator_dev *rdev, int severity,
|
|
struct bd957x_regulator_data *r)
|
|
{
|
|
if ((severity == REGULATOR_SEVERITY_ERR &&
|
|
r->temp_notif != REGULATOR_EVENT_OVER_TEMP) ||
|
|
(severity == REGULATOR_SEVERITY_WARN &&
|
|
r->temp_notif != REGULATOR_EVENT_OVER_TEMP_WARN)) {
|
|
dev_warn(rdev_get_dev(rdev),
|
|
"Can't support both thermal WARN and ERR\n");
|
|
if (severity == REGULATOR_SEVERITY_WARN)
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int bd9576_set_ocp(struct regulator_dev *rdev, int lim_uA, int severity,
|
|
bool enable)
|
|
{
|
|
struct bd957x_data *d;
|
|
struct bd957x_regulator_data *r;
|
|
int reg, mask;
|
|
int Vfet, rfet;
|
|
const struct linear_range *range;
|
|
int num_ranges;
|
|
|
|
if ((lim_uA && !enable) || (!lim_uA && enable))
|
|
return -EINVAL;
|
|
|
|
r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
|
|
if (!r->oc_supported)
|
|
return -EINVAL;
|
|
|
|
d = rdev_get_drvdata(rdev);
|
|
|
|
if (severity == REGULATOR_SEVERITY_PROT) {
|
|
reg = r->ocp_reg;
|
|
mask = r->ocp_mask;
|
|
if (r->ocw_rfet) {
|
|
range = voutS1_ocp_ranges;
|
|
num_ranges = ARRAY_SIZE(voutS1_ocp_ranges);
|
|
rfet = r->ocw_rfet / 1000;
|
|
} else {
|
|
range = voutS1_ocp_ranges_internal;
|
|
num_ranges = ARRAY_SIZE(voutS1_ocp_ranges_internal);
|
|
/* Internal values are already micro-amperes */
|
|
rfet = 1000;
|
|
}
|
|
} else {
|
|
reg = r->ocw_reg;
|
|
mask = r->ocw_mask;
|
|
|
|
if (r->ocw_rfet) {
|
|
range = voutS1_ocw_ranges;
|
|
num_ranges = ARRAY_SIZE(voutS1_ocw_ranges);
|
|
rfet = r->ocw_rfet / 1000;
|
|
} else {
|
|
range = voutS1_ocw_ranges_internal;
|
|
num_ranges = ARRAY_SIZE(voutS1_ocw_ranges_internal);
|
|
/* Internal values are already micro-amperes */
|
|
rfet = 1000;
|
|
}
|
|
|
|
/* We abuse uvd fields for OCW on VoutS1 */
|
|
if (r->uvd_notif) {
|
|
/*
|
|
* If both warning and error are requested, prioritize
|
|
* ERROR configuration
|
|
*/
|
|
if (check_ocp_flag_mismatch(rdev, severity, r))
|
|
return 0;
|
|
} else {
|
|
bool warn = severity == REGULATOR_SEVERITY_WARN;
|
|
|
|
bd9576_fill_ocp_flags(r, warn);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* limits are given in uA, rfet is mOhm
|
|
* Divide lim_uA by 1000 to get Vfet in uV.
|
|
* (We expect both Rfet and limit uA to be magnitude of hundreds of
|
|
* milli Amperes & milli Ohms => we should still have decent accuracy)
|
|
*/
|
|
Vfet = lim_uA/1000 * rfet;
|
|
|
|
return bd9576_set_limit(range, num_ranges, d->regmap,
|
|
reg, mask, Vfet);
|
|
}
|
|
|
|
static int bd9576_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
|
|
bool enable)
|
|
{
|
|
struct bd957x_data *d;
|
|
struct bd957x_regulator_data *r;
|
|
int mask, reg;
|
|
|
|
if (severity == REGULATOR_SEVERITY_PROT) {
|
|
if (!enable || lim_uV)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* BD9576 has enable control as a special value in limit reg. Can't
|
|
* set limit but keep feature disabled or enable W/O given limit.
|
|
*/
|
|
if ((lim_uV && !enable) || (!lim_uV && enable))
|
|
return -EINVAL;
|
|
|
|
r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
|
|
d = rdev_get_drvdata(rdev);
|
|
|
|
mask = r->xvd_mask;
|
|
reg = r->uvd_reg;
|
|
/*
|
|
* Check that there is no mismatch for what the detection IRQs are to
|
|
* be used.
|
|
*/
|
|
if (r->uvd_notif) {
|
|
if (check_uvd_flag_mismatch(rdev, severity, r))
|
|
return 0;
|
|
} else {
|
|
bd9576_fill_uvd_flags(r, severity == REGULATOR_SEVERITY_WARN);
|
|
}
|
|
|
|
return bd9576_set_limit(r->xvd_ranges, r->num_xvd_ranges, d->regmap,
|
|
reg, mask, lim_uV);
|
|
}
|
|
|
|
static int bd9576_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
|
|
bool enable)
|
|
{
|
|
struct bd957x_data *d;
|
|
struct bd957x_regulator_data *r;
|
|
int mask, reg;
|
|
|
|
if (severity == REGULATOR_SEVERITY_PROT) {
|
|
if (!enable || lim_uV)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* BD9576 has enable control as a special value in limit reg. Can't
|
|
* set limit but keep feature disabled or enable W/O given limit.
|
|
*/
|
|
if ((lim_uV && !enable) || (!lim_uV && enable))
|
|
return -EINVAL;
|
|
|
|
r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
|
|
d = rdev_get_drvdata(rdev);
|
|
|
|
mask = r->xvd_mask;
|
|
reg = r->ovd_reg;
|
|
/*
|
|
* Check that there is no mismatch for what the detection IRQs are to
|
|
* be used.
|
|
*/
|
|
if (r->ovd_notif) {
|
|
if (check_ovd_flag_mismatch(rdev, severity, r))
|
|
return 0;
|
|
} else {
|
|
bd9576_fill_ovd_flags(r, severity == REGULATOR_SEVERITY_WARN);
|
|
}
|
|
|
|
return bd9576_set_limit(r->xvd_ranges, r->num_xvd_ranges, d->regmap,
|
|
reg, mask, lim_uV);
|
|
}
|
|
|
|
|
|
static int bd9576_set_tw(struct regulator_dev *rdev, int lim, int severity,
|
|
bool enable)
|
|
{
|
|
struct bd957x_data *d;
|
|
struct bd957x_regulator_data *r;
|
|
int i;
|
|
|
|
/*
|
|
* BD9576MUF has fixed temperature limits
|
|
* The detection can only be enabled/disabled
|
|
*/
|
|
if (lim)
|
|
return -EINVAL;
|
|
|
|
/* Protection can't be disabled */
|
|
if (severity == REGULATOR_SEVERITY_PROT) {
|
|
if (!enable)
|
|
return -EINVAL;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
r = container_of(rdev->desc, struct bd957x_regulator_data, desc);
|
|
d = rdev_get_drvdata(rdev);
|
|
|
|
/*
|
|
* Check that there is no mismatch for what the detection IRQs are to
|
|
* be used.
|
|
*/
|
|
if (r->temp_notif)
|
|
if (check_temp_flag_mismatch(rdev, severity, r))
|
|
return 0;
|
|
|
|
bd9576_fill_temp_flags(r, enable, severity == REGULATOR_SEVERITY_WARN);
|
|
|
|
if (enable)
|
|
return regmap_update_bits(d->regmap, BD957X_REG_INT_THERM_MASK,
|
|
BD9576_THERM_IRQ_MASK_TW, 0);
|
|
|
|
/*
|
|
* If any of the regulators is interested in thermal warning we keep IRQ
|
|
* enabled.
|
|
*/
|
|
for (i = 0; i < BD9576_NUM_REGULATORS; i++)
|
|
if (d->regulator_data[i].temp_notif)
|
|
return 0;
|
|
|
|
return regmap_update_bits(d->regmap, BD957X_REG_INT_THERM_MASK,
|
|
BD9576_THERM_IRQ_MASK_TW,
|
|
BD9576_THERM_IRQ_MASK_TW);
|
|
}
|
|
|
|
static const struct regulator_ops bd9573_vout34_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = bd957x_vout34_list_voltage,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd9576_vout34_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = bd957x_vout34_list_voltage,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_over_voltage_protection = bd9576_set_ovp,
|
|
.set_under_voltage_protection = bd9576_set_uvp,
|
|
.set_thermal_protection = bd9576_set_tw,
|
|
};
|
|
|
|
static const struct regulator_ops bd9573_vouts1_regulator_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd9576_vouts1_regulator_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_over_current_protection = bd9576_set_ocp,
|
|
};
|
|
|
|
static const struct regulator_ops bd9573_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = bd957x_list_voltage,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops bd9576_ops = {
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.list_voltage = bd957x_list_voltage,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_over_voltage_protection = bd9576_set_ovp,
|
|
.set_under_voltage_protection = bd9576_set_uvp,
|
|
.set_thermal_protection = bd9576_set_tw,
|
|
};
|
|
|
|
static const struct regulator_ops *bd9573_ops_arr[] = {
|
|
[BD957X_VD50] = &bd9573_ops,
|
|
[BD957X_VD18] = &bd9573_ops,
|
|
[BD957X_VDDDR] = &bd9573_vout34_ops,
|
|
[BD957X_VD10] = &bd9573_vout34_ops,
|
|
[BD957X_VOUTL1] = &bd9573_ops,
|
|
[BD957X_VOUTS1] = &bd9573_vouts1_regulator_ops,
|
|
};
|
|
|
|
static const struct regulator_ops *bd9576_ops_arr[] = {
|
|
[BD957X_VD50] = &bd9576_ops,
|
|
[BD957X_VD18] = &bd9576_ops,
|
|
[BD957X_VDDDR] = &bd9576_vout34_ops,
|
|
[BD957X_VD10] = &bd9576_vout34_ops,
|
|
[BD957X_VOUTL1] = &bd9576_ops,
|
|
[BD957X_VOUTS1] = &bd9576_vouts1_regulator_ops,
|
|
};
|
|
|
|
static int vouts1_get_fet_res(struct device_node *np,
|
|
const struct regulator_desc *desc,
|
|
struct regulator_config *cfg)
|
|
{
|
|
struct bd957x_regulator_data *data;
|
|
int ret;
|
|
u32 uohms;
|
|
|
|
data = container_of(desc, struct bd957x_regulator_data, desc);
|
|
|
|
ret = of_property_read_u32(np, "rohm,ocw-fet-ron-micro-ohms", &uohms);
|
|
if (ret) {
|
|
if (ret != -EINVAL)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
data->ocw_rfet = uohms;
|
|
return 0;
|
|
}
|
|
|
|
static struct bd957x_data bd957x_regulators = {
|
|
.regulator_data = {
|
|
{
|
|
.desc = {
|
|
.name = "VD50",
|
|
.of_match = of_match_ptr("regulator-vd50"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VD50,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.volt_table = &vout1_volt_table[0],
|
|
.n_voltages = ARRAY_SIZE(vout1_volt_table),
|
|
.vsel_reg = BD957X_REG_VOUT1_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT1_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER1,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.xvd_ranges = vout1_xvd_ranges,
|
|
.num_xvd_ranges = ARRAY_SIZE(vout1_xvd_ranges),
|
|
.ovd_reg = BD9576_REG_VOUT1_OVD,
|
|
.uvd_reg = BD9576_REG_VOUT1_UVD,
|
|
.xvd_mask = BD9576_MASK_XVD,
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VD18",
|
|
.of_match = of_match_ptr("regulator-vd18"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VD18,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.volt_table = &vout2_volt_table[0],
|
|
.n_voltages = ARRAY_SIZE(vout2_volt_table),
|
|
.vsel_reg = BD957X_REG_VOUT2_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT2_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER2,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.xvd_ranges = vout234_xvd_ranges,
|
|
.num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges),
|
|
.ovd_reg = BD9576_REG_VOUT2_OVD,
|
|
.uvd_reg = BD9576_REG_VOUT2_UVD,
|
|
.xvd_mask = BD9576_MASK_XVD,
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VDDDR",
|
|
.of_match = of_match_ptr("regulator-vdddr"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VDDDR,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = BD957X_VOUTS34_NUM_VOLT,
|
|
.vsel_reg = BD957X_REG_VOUT3_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT3_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER3,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.ovd_reg = BD9576_REG_VOUT3_OVD,
|
|
.uvd_reg = BD9576_REG_VOUT3_UVD,
|
|
.xvd_mask = BD9576_MASK_XVD,
|
|
.xvd_ranges = vout234_xvd_ranges,
|
|
.num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges),
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VD10",
|
|
.of_match = of_match_ptr("regulator-vd10"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VD10,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.fixed_uV = BD957X_VOUTS4_BASE_VOLT,
|
|
.n_voltages = BD957X_VOUTS34_NUM_VOLT,
|
|
.vsel_reg = BD957X_REG_VOUT4_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUT4_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGER4,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.xvd_ranges = vout234_xvd_ranges,
|
|
.num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges),
|
|
.ovd_reg = BD9576_REG_VOUT4_OVD,
|
|
.uvd_reg = BD9576_REG_VOUT4_UVD,
|
|
.xvd_mask = BD9576_MASK_XVD,
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VOUTL1",
|
|
.of_match = of_match_ptr("regulator-voutl1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VOUTL1,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.volt_table = &voutl1_volt_table[0],
|
|
.n_voltages = ARRAY_SIZE(voutl1_volt_table),
|
|
.vsel_reg = BD957X_REG_VOUTL1_TUNE,
|
|
.vsel_mask = BD957X_MASK_VOUTL1_TUNE,
|
|
.enable_reg = BD957X_REG_POW_TRIGGERL1,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.xvd_ranges = voutL1_xvd_ranges,
|
|
.num_xvd_ranges = ARRAY_SIZE(voutL1_xvd_ranges),
|
|
.ovd_reg = BD9576_REG_VOUTL1_OVD,
|
|
.uvd_reg = BD9576_REG_VOUTL1_UVD,
|
|
.xvd_mask = BD9576_MASK_XVD,
|
|
},
|
|
{
|
|
.desc = {
|
|
.name = "VOUTS1",
|
|
.of_match = of_match_ptr("regulator-vouts1"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = BD957X_VOUTS1,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.n_voltages = 1,
|
|
.fixed_uV = BD957X_VOUTS1_VOLT,
|
|
.enable_reg = BD957X_REG_POW_TRIGGERS1,
|
|
.enable_mask = BD957X_REGULATOR_EN_MASK,
|
|
.enable_val = BD957X_REGULATOR_DIS_VAL,
|
|
.enable_is_inverted = true,
|
|
.owner = THIS_MODULE,
|
|
.of_parse_cb = vouts1_get_fet_res,
|
|
},
|
|
.oc_supported = true,
|
|
.ocw_reg = BD9576_REG_VOUT1S_OCW,
|
|
.ocw_mask = BD9576_MASK_VOUT1S_OCW,
|
|
.ocp_reg = BD9576_REG_VOUT1S_OCP,
|
|
.ocp_mask = BD9576_MASK_VOUT1S_OCP,
|
|
},
|
|
},
|
|
};
|
|
|
|
static int bd9576_renable(struct regulator_irq_data *rid, int reg, int mask)
|
|
{
|
|
int val, ret;
|
|
struct bd957x_data *d = (struct bd957x_data *)rid->data;
|
|
|
|
ret = regmap_read(d->regmap, reg, &val);
|
|
if (ret)
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
if (rid->opaque && rid->opaque == (val & mask)) {
|
|
/*
|
|
* It seems we stil have same status. Ack and return
|
|
* information that we are still out of limits and core
|
|
* should not enable IRQ
|
|
*/
|
|
regmap_write(d->regmap, reg, mask & val);
|
|
return REGULATOR_ERROR_ON;
|
|
}
|
|
rid->opaque = 0;
|
|
/*
|
|
* Status was changed. Either prolem was solved or we have new issues.
|
|
* Let's re-enable IRQs and be prepared to report problems again
|
|
*/
|
|
return REGULATOR_ERROR_CLEARED;
|
|
}
|
|
|
|
static int bd9576_uvd_renable(struct regulator_irq_data *rid)
|
|
{
|
|
return bd9576_renable(rid, BD957X_REG_INT_UVD_STAT, UVD_IRQ_VALID_MASK);
|
|
}
|
|
|
|
static int bd9576_ovd_renable(struct regulator_irq_data *rid)
|
|
{
|
|
return bd9576_renable(rid, BD957X_REG_INT_OVD_STAT, OVD_IRQ_VALID_MASK);
|
|
}
|
|
|
|
static int bd9576_temp_renable(struct regulator_irq_data *rid)
|
|
{
|
|
return bd9576_renable(rid, BD957X_REG_INT_THERM_STAT,
|
|
BD9576_THERM_IRQ_MASK_TW);
|
|
}
|
|
|
|
static int bd9576_uvd_handler(int irq, struct regulator_irq_data *rid,
|
|
unsigned long *dev_mask)
|
|
{
|
|
int val, ret, i;
|
|
struct bd957x_data *d = (struct bd957x_data *)rid->data;
|
|
|
|
ret = regmap_read(d->regmap, BD957X_REG_INT_UVD_STAT, &val);
|
|
if (ret)
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
*dev_mask = 0;
|
|
|
|
rid->opaque = val & UVD_IRQ_VALID_MASK;
|
|
|
|
/*
|
|
* Go through the set status bits and report either error or warning
|
|
* to the notifier depending on what was flagged in DT
|
|
*/
|
|
*dev_mask = val & BD9576_xVD_IRQ_MASK_VOUT1TO4;
|
|
/* There is 1 bit gap in register after Vout1 .. Vout4 statuses */
|
|
*dev_mask |= ((val & BD9576_xVD_IRQ_MASK_VOUTL1) >> 1);
|
|
/*
|
|
* We (ab)use the uvd for OCW notification. DT parsing should
|
|
* have added correct OCW flag to uvd_notif and uvd_err for S1
|
|
*/
|
|
*dev_mask |= ((val & BD9576_UVD_IRQ_MASK_VOUTS1_OCW) >> 1);
|
|
|
|
for_each_set_bit(i, dev_mask, 6) {
|
|
struct bd957x_regulator_data *rdata;
|
|
struct regulator_err_state *stat;
|
|
|
|
rdata = &d->regulator_data[i];
|
|
stat = &rid->states[i];
|
|
|
|
stat->notifs = rdata->uvd_notif;
|
|
stat->errors = rdata->uvd_err;
|
|
}
|
|
|
|
ret = regmap_write(d->regmap, BD957X_REG_INT_UVD_STAT,
|
|
UVD_IRQ_VALID_MASK & val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd9576_ovd_handler(int irq, struct regulator_irq_data *rid,
|
|
unsigned long *dev_mask)
|
|
{
|
|
int val, ret, i;
|
|
struct bd957x_data *d = (struct bd957x_data *)rid->data;
|
|
|
|
ret = regmap_read(d->regmap, BD957X_REG_INT_OVD_STAT, &val);
|
|
if (ret)
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
rid->opaque = val & OVD_IRQ_VALID_MASK;
|
|
*dev_mask = 0;
|
|
|
|
if (!(val & OVD_IRQ_VALID_MASK))
|
|
return 0;
|
|
|
|
*dev_mask = val & BD9576_xVD_IRQ_MASK_VOUT1TO4;
|
|
/* There is 1 bit gap in register after Vout1 .. Vout4 statuses */
|
|
*dev_mask |= ((val & BD9576_xVD_IRQ_MASK_VOUTL1) >> 1);
|
|
|
|
for_each_set_bit(i, dev_mask, 5) {
|
|
struct bd957x_regulator_data *rdata;
|
|
struct regulator_err_state *stat;
|
|
|
|
rdata = &d->regulator_data[i];
|
|
stat = &rid->states[i];
|
|
|
|
stat->notifs = rdata->ovd_notif;
|
|
stat->errors = rdata->ovd_err;
|
|
}
|
|
|
|
/* Clear the sub-IRQ status */
|
|
regmap_write(d->regmap, BD957X_REG_INT_OVD_STAT,
|
|
OVD_IRQ_VALID_MASK & val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define BD9576_DEV_MASK_ALL_REGULATORS 0x3F
|
|
|
|
static int bd9576_thermal_handler(int irq, struct regulator_irq_data *rid,
|
|
unsigned long *dev_mask)
|
|
{
|
|
int val, ret, i;
|
|
struct bd957x_data *d = (struct bd957x_data *)rid->data;
|
|
|
|
ret = regmap_read(d->regmap, BD957X_REG_INT_THERM_STAT, &val);
|
|
if (ret)
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
if (!(val & BD9576_THERM_IRQ_MASK_TW)) {
|
|
*dev_mask = 0;
|
|
return 0;
|
|
}
|
|
|
|
*dev_mask = BD9576_DEV_MASK_ALL_REGULATORS;
|
|
|
|
for (i = 0; i < BD9576_NUM_REGULATORS; i++) {
|
|
struct bd957x_regulator_data *rdata;
|
|
struct regulator_err_state *stat;
|
|
|
|
rdata = &d->regulator_data[i];
|
|
stat = &rid->states[i];
|
|
|
|
stat->notifs = rdata->temp_notif;
|
|
stat->errors = rdata->temp_err;
|
|
}
|
|
|
|
/* Clear the sub-IRQ status */
|
|
regmap_write(d->regmap, BD957X_REG_INT_THERM_STAT,
|
|
BD9576_THERM_IRQ_MASK_TW);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd957x_probe(struct platform_device *pdev)
|
|
{
|
|
int i;
|
|
unsigned int num_reg_data;
|
|
bool vout_mode, ddr_sel, may_have_irqs = false;
|
|
struct regmap *regmap;
|
|
struct bd957x_data *ic_data;
|
|
struct regulator_config config = { 0 };
|
|
/* All regulators are related to UVD and thermal IRQs... */
|
|
struct regulator_dev *rdevs[BD9576_NUM_REGULATORS];
|
|
/* ...But VoutS1 is not flagged by OVD IRQ */
|
|
struct regulator_dev *ovd_devs[BD9576_NUM_OVD_REGULATORS];
|
|
static const struct regulator_irq_desc bd9576_notif_uvd = {
|
|
.name = "bd9576-uvd",
|
|
.irq_off_ms = 1000,
|
|
.map_event = bd9576_uvd_handler,
|
|
.renable = bd9576_uvd_renable,
|
|
.data = &bd957x_regulators,
|
|
};
|
|
static const struct regulator_irq_desc bd9576_notif_ovd = {
|
|
.name = "bd9576-ovd",
|
|
.irq_off_ms = 1000,
|
|
.map_event = bd9576_ovd_handler,
|
|
.renable = bd9576_ovd_renable,
|
|
.data = &bd957x_regulators,
|
|
};
|
|
static const struct regulator_irq_desc bd9576_notif_temp = {
|
|
.name = "bd9576-temp",
|
|
.irq_off_ms = 1000,
|
|
.map_event = bd9576_thermal_handler,
|
|
.renable = bd9576_temp_renable,
|
|
.data = &bd957x_regulators,
|
|
};
|
|
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
|
|
|
|
num_reg_data = ARRAY_SIZE(bd957x_regulators.regulator_data);
|
|
|
|
ic_data = &bd957x_regulators;
|
|
|
|
regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!regmap) {
|
|
dev_err(&pdev->dev, "No regmap\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ic_data->regmap = regmap;
|
|
vout_mode = device_property_read_bool(pdev->dev.parent,
|
|
"rohm,vout1-en-low");
|
|
if (vout_mode) {
|
|
struct gpio_desc *en;
|
|
|
|
dev_dbg(&pdev->dev, "GPIO controlled mode\n");
|
|
|
|
/* VOUT1 enable state judged by VOUT1_EN pin */
|
|
/* See if we have GPIO defined */
|
|
en = devm_fwnode_gpiod_get(&pdev->dev,
|
|
dev_fwnode(pdev->dev.parent),
|
|
"rohm,vout1-en", GPIOD_OUT_LOW,
|
|
"vout1-en");
|
|
|
|
/* VOUT1_OPS gpio ctrl */
|
|
/*
|
|
* Regulator core prioritizes the ena_gpio over
|
|
* enable/disable/is_enabled callbacks so no need to clear them
|
|
* even if GPIO is used. So, we can still use same ops.
|
|
*
|
|
* In theory it is possible someone wants to set vout1-en LOW
|
|
* during OTP loading and set VOUT1 to be controlled by GPIO -
|
|
* but control the GPIO from some where else than this driver.
|
|
* For that to work we should unset the is_enabled callback
|
|
* here.
|
|
*
|
|
* I believe such case where rohm,vout1-en-low is set and
|
|
* vout1-en-gpios is not is likely to be a misconfiguration.
|
|
* So let's just err out for now.
|
|
*/
|
|
if (!IS_ERR(en))
|
|
config.ena_gpiod = en;
|
|
else
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(en),
|
|
"Failed to get VOUT1 control GPIO\n");
|
|
}
|
|
|
|
/*
|
|
* If more than one PMIC needs to be controlled by same processor then
|
|
* allocate the regulator data array here and use bd9576_regulators as
|
|
* template. At the moment I see no such use-case so I spare some
|
|
* bytes and use bd9576_regulators directly for non-constant configs
|
|
* like DDR voltage selection.
|
|
*/
|
|
platform_set_drvdata(pdev, ic_data);
|
|
ddr_sel = device_property_read_bool(pdev->dev.parent,
|
|
"rohm,ddr-sel-low");
|
|
if (ddr_sel)
|
|
ic_data->regulator_data[2].desc.fixed_uV = 1350000;
|
|
else
|
|
ic_data->regulator_data[2].desc.fixed_uV = 1500000;
|
|
|
|
switch (chip) {
|
|
case ROHM_CHIP_TYPE_BD9576:
|
|
may_have_irqs = true;
|
|
dev_dbg(&pdev->dev, "Found BD9576MUF\n");
|
|
break;
|
|
case ROHM_CHIP_TYPE_BD9573:
|
|
dev_dbg(&pdev->dev, "Found BD9573MUF\n");
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unsupported chip type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < num_reg_data; i++) {
|
|
struct regulator_desc *d;
|
|
|
|
d = &ic_data->regulator_data[i].desc;
|
|
|
|
|
|
if (may_have_irqs) {
|
|
if (d->id >= ARRAY_SIZE(bd9576_ops_arr))
|
|
return -EINVAL;
|
|
|
|
d->ops = bd9576_ops_arr[d->id];
|
|
} else {
|
|
if (d->id >= ARRAY_SIZE(bd9573_ops_arr))
|
|
return -EINVAL;
|
|
|
|
d->ops = bd9573_ops_arr[d->id];
|
|
}
|
|
}
|
|
|
|
config.dev = pdev->dev.parent;
|
|
config.regmap = regmap;
|
|
config.driver_data = ic_data;
|
|
|
|
for (i = 0; i < num_reg_data; i++) {
|
|
|
|
struct bd957x_regulator_data *r = &ic_data->regulator_data[i];
|
|
const struct regulator_desc *desc = &r->desc;
|
|
|
|
r->rdev = devm_regulator_register(&pdev->dev, desc,
|
|
&config);
|
|
if (IS_ERR(r->rdev))
|
|
return dev_err_probe(&pdev->dev, PTR_ERR(r->rdev),
|
|
"failed to register %s regulator\n",
|
|
desc->name);
|
|
/*
|
|
* Clear the VOUT1 GPIO setting - rest of the regulators do not
|
|
* support GPIO control
|
|
*/
|
|
config.ena_gpiod = NULL;
|
|
|
|
if (!may_have_irqs)
|
|
continue;
|
|
|
|
rdevs[i] = r->rdev;
|
|
if (i < BD957X_VOUTS1)
|
|
ovd_devs[i] = r->rdev;
|
|
}
|
|
if (may_have_irqs) {
|
|
void *ret;
|
|
/*
|
|
* We can add both the possible error and warning flags here
|
|
* because the core uses these only for status clearing and
|
|
* if we use warnings - errors are always clear and the other
|
|
* way around. We can also add CURRENT flag for all regulators
|
|
* because it is never set if it is not supported. Same applies
|
|
* to setting UVD for VoutS1 - it is not accidentally cleared
|
|
* as it is never set.
|
|
*/
|
|
int uvd_errs = REGULATOR_ERROR_UNDER_VOLTAGE |
|
|
REGULATOR_ERROR_UNDER_VOLTAGE_WARN |
|
|
REGULATOR_ERROR_OVER_CURRENT |
|
|
REGULATOR_ERROR_OVER_CURRENT_WARN;
|
|
int ovd_errs = REGULATOR_ERROR_OVER_VOLTAGE_WARN |
|
|
REGULATOR_ERROR_REGULATION_OUT;
|
|
int temp_errs = REGULATOR_ERROR_OVER_TEMP |
|
|
REGULATOR_ERROR_OVER_TEMP_WARN;
|
|
int irq;
|
|
|
|
irq = platform_get_irq_byname(pdev, "bd9576-uvd");
|
|
|
|
/* Register notifiers - can fail if IRQ is not given */
|
|
ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_uvd,
|
|
irq, 0, uvd_errs, NULL,
|
|
&rdevs[0],
|
|
BD9576_NUM_REGULATORS);
|
|
if (IS_ERR(ret)) {
|
|
if (PTR_ERR(ret) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_warn(&pdev->dev, "UVD disabled %pe\n", ret);
|
|
}
|
|
|
|
irq = platform_get_irq_byname(pdev, "bd9576-ovd");
|
|
|
|
ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_ovd,
|
|
irq, 0, ovd_errs, NULL,
|
|
&ovd_devs[0],
|
|
BD9576_NUM_OVD_REGULATORS);
|
|
if (IS_ERR(ret)) {
|
|
if (PTR_ERR(ret) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_warn(&pdev->dev, "OVD disabled %pe\n", ret);
|
|
}
|
|
irq = platform_get_irq_byname(pdev, "bd9576-temp");
|
|
|
|
ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_temp,
|
|
irq, 0, temp_errs, NULL,
|
|
&rdevs[0],
|
|
BD9576_NUM_REGULATORS);
|
|
if (IS_ERR(ret)) {
|
|
if (PTR_ERR(ret) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_warn(&pdev->dev, "Thermal warning disabled %pe\n",
|
|
ret);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id bd957x_pmic_id[] = {
|
|
{ "bd9573-regulator", ROHM_CHIP_TYPE_BD9573 },
|
|
{ "bd9576-regulator", ROHM_CHIP_TYPE_BD9576 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, bd957x_pmic_id);
|
|
|
|
static struct platform_driver bd957x_regulator = {
|
|
.driver = {
|
|
.name = "bd957x-pmic",
|
|
},
|
|
.probe = bd957x_probe,
|
|
.id_table = bd957x_pmic_id,
|
|
};
|
|
|
|
module_platform_driver(bd957x_regulator);
|
|
|
|
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
|
|
MODULE_DESCRIPTION("ROHM BD9576/BD9573 voltage regulator driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:bd957x-pmic");
|