mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Randy Dunlap](/assets/img/avatar_default.png)
Add description for MCP16502_REG_HPM to prevent a kernel-doc warning: drivers/regulator/mcp16502.c:90: warning: Enum value 'MCP16502_REG_HPM' not described in enum 'mcp16502_reg' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230117070139.28905-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
602 lines
16 KiB
C
602 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// MCP16502 PMIC driver
|
|
//
|
|
// Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
|
|
//
|
|
// Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
|
|
//
|
|
// Inspired from tps65086-regulator.c
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#define VDD_LOW_SEL 0x0D
|
|
#define VDD_HIGH_SEL 0x3F
|
|
|
|
#define MCP16502_FLT BIT(7)
|
|
#define MCP16502_DVSR GENMASK(3, 2)
|
|
#define MCP16502_ENS BIT(0)
|
|
|
|
/*
|
|
* The PMIC has four sets of registers corresponding to four power modes:
|
|
* Performance, Active, Low-power, Hibernate.
|
|
*
|
|
* Registers:
|
|
* Each regulator has a register for each power mode. To access a register
|
|
* for a specific regulator and mode BASE_* and OFFSET_* need to be added.
|
|
*
|
|
* Operating modes:
|
|
* In order for the PMIC to transition to operating modes it has to be
|
|
* controlled via GPIO lines called LPM and HPM.
|
|
*
|
|
* The registers are fully configurable such that you can put all regulators in
|
|
* a low-power state while the PMIC is in Active mode. They are supposed to be
|
|
* configured at startup and then simply transition to/from a global low-power
|
|
* state by setting the GPIO lpm pin high/low.
|
|
*
|
|
* This driver keeps the PMIC in Active mode, Low-power state is set for the
|
|
* regulators by enabling/disabling operating mode (FPWM or Auto PFM).
|
|
*
|
|
* The PMIC's Low-power and Hibernate modes are used during standby/suspend.
|
|
* To enter standby/suspend the PMIC will go to Low-power mode. From there, it
|
|
* will transition to Hibernate when the PWRHLD line is set to low by the MPU.
|
|
*/
|
|
|
|
/*
|
|
* This function is useful for iterating over all regulators and accessing their
|
|
* registers in a generic way or accessing a regulator device by its id.
|
|
*/
|
|
#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r)
|
|
#define MCP16502_STAT_BASE(i) ((i) + 5)
|
|
|
|
#define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
|
|
#define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
|
|
#define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
|
|
|
|
#define MCP16502_MODE_AUTO_PFM 0
|
|
#define MCP16502_MODE_FPWM BIT(6)
|
|
|
|
#define MCP16502_VSEL 0x3F
|
|
#define MCP16502_EN BIT(7)
|
|
#define MCP16502_MODE BIT(6)
|
|
|
|
#define MCP16502_MIN_REG 0x0
|
|
#define MCP16502_MAX_REG 0x65
|
|
|
|
/**
|
|
* enum mcp16502_reg - MCP16502 regulators's registers
|
|
* @MCP16502_REG_A: active state register
|
|
* @MCP16502_REG_LPM: low power mode state register
|
|
* @MCP16502_REG_HIB: hibernate state register
|
|
* @MCP16502_REG_HPM: high-performance mode register
|
|
* @MCP16502_REG_SEQ: startup sequence register
|
|
* @MCP16502_REG_CFG: configuration register
|
|
*/
|
|
enum mcp16502_reg {
|
|
MCP16502_REG_A,
|
|
MCP16502_REG_LPM,
|
|
MCP16502_REG_HIB,
|
|
MCP16502_REG_HPM,
|
|
MCP16502_REG_SEQ,
|
|
MCP16502_REG_CFG,
|
|
};
|
|
|
|
/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
|
|
static const unsigned int mcp16502_ramp_b1l12[] = {
|
|
6250, 3125, 2083, 1563
|
|
};
|
|
|
|
/* Ramp delay (uV/us) for buck2, buck3, buck4. */
|
|
static const unsigned int mcp16502_ramp_b234[] = {
|
|
3125, 1563, 1042, 781
|
|
};
|
|
|
|
static unsigned int mcp16502_of_map_mode(unsigned int mode)
|
|
{
|
|
if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
|
|
return mode;
|
|
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
|
|
#define MCP16502_REGULATOR(_name, _id, _ranges, _ops, _ramp_table) \
|
|
[_id] = { \
|
|
.name = _name, \
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
.id = _id, \
|
|
.ops = &(_ops), \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
.n_voltages = MCP16502_VSEL + 1, \
|
|
.linear_ranges = _ranges, \
|
|
.linear_min_sel = VDD_LOW_SEL, \
|
|
.n_linear_ranges = ARRAY_SIZE(_ranges), \
|
|
.of_match = of_match_ptr(_name), \
|
|
.of_map_mode = mcp16502_of_map_mode, \
|
|
.vsel_reg = (((_id) + 1) << 4), \
|
|
.vsel_mask = MCP16502_VSEL, \
|
|
.enable_reg = (((_id) + 1) << 4), \
|
|
.enable_mask = MCP16502_EN, \
|
|
.ramp_reg = MCP16502_REG_BASE(_id, CFG), \
|
|
.ramp_mask = MCP16502_DVSR, \
|
|
.ramp_delay_table = _ramp_table, \
|
|
.n_ramp_values = ARRAY_SIZE(_ramp_table), \
|
|
}
|
|
|
|
enum {
|
|
BUCK1 = 0,
|
|
BUCK2,
|
|
BUCK3,
|
|
BUCK4,
|
|
LDO1,
|
|
LDO2,
|
|
NUM_REGULATORS
|
|
};
|
|
|
|
/*
|
|
* struct mcp16502 - PMIC representation
|
|
* @lpm: LPM GPIO descriptor
|
|
*/
|
|
struct mcp16502 {
|
|
struct gpio_desc *lpm;
|
|
};
|
|
|
|
/*
|
|
* mcp16502_gpio_set_mode() - set the GPIO corresponding value
|
|
*
|
|
* Used to prepare transitioning into hibernate or resuming from it.
|
|
*/
|
|
static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
|
|
{
|
|
switch (mode) {
|
|
case MCP16502_OPMODE_ACTIVE:
|
|
gpiod_set_value(mcp->lpm, 0);
|
|
break;
|
|
case MCP16502_OPMODE_LPM:
|
|
case MCP16502_OPMODE_HIB:
|
|
gpiod_set_value(mcp->lpm, 1);
|
|
break;
|
|
default:
|
|
pr_err("%s: %d invalid\n", __func__, mode);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mcp16502_get_reg() - get the PMIC's state configuration register for opmode
|
|
*
|
|
* @rdev: the regulator whose register we are searching
|
|
* @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
|
|
*/
|
|
static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode)
|
|
{
|
|
switch (opmode) {
|
|
case MCP16502_OPMODE_ACTIVE:
|
|
return MCP16502_REG_BASE(rdev_get_id(rdev), A);
|
|
case MCP16502_OPMODE_LPM:
|
|
return MCP16502_REG_BASE(rdev_get_id(rdev), LPM);
|
|
case MCP16502_OPMODE_HIB:
|
|
return MCP16502_REG_BASE(rdev_get_id(rdev), HIB);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mcp16502_get_mode() - return the current operating mode of a regulator
|
|
*
|
|
* Note: all functions that are not part of entering/exiting standby/suspend
|
|
* use the Active mode registers.
|
|
*
|
|
* Note: this is different from the PMIC's operatig mode, it is the
|
|
* MODE bit from the regulator's register.
|
|
*/
|
|
static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int val;
|
|
int ret, reg;
|
|
|
|
reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
ret = regmap_read(rdev->regmap, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (val & MCP16502_MODE) {
|
|
case MCP16502_MODE_FPWM:
|
|
return REGULATOR_MODE_NORMAL;
|
|
case MCP16502_MODE_AUTO_PFM:
|
|
return REGULATOR_MODE_IDLE;
|
|
default:
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* _mcp16502_set_mode() - helper for set_mode and set_suspend_mode
|
|
*
|
|
* @rdev: the regulator for which we are setting the mode
|
|
* @mode: the regulator's mode (the one from MODE bit)
|
|
* @opmode: the PMIC's operating mode: Active/Low-power/Hibernate
|
|
*/
|
|
static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
|
|
unsigned int op_mode)
|
|
{
|
|
int val;
|
|
int reg;
|
|
|
|
reg = mcp16502_get_state_reg(rdev, op_mode);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = MCP16502_MODE_FPWM;
|
|
break;
|
|
case REGULATOR_MODE_IDLE:
|
|
val = MCP16502_MODE_AUTO_PFM;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = regmap_update_bits(rdev->regmap, reg, MCP16502_MODE, val);
|
|
return reg;
|
|
}
|
|
|
|
/*
|
|
* mcp16502_set_mode() - regulator_ops set_mode
|
|
*/
|
|
static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_ACTIVE);
|
|
}
|
|
|
|
/*
|
|
* mcp16502_get_status() - regulator_ops get_status
|
|
*/
|
|
static int mcp16502_get_status(struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_read(rdev->regmap, MCP16502_STAT_BASE(rdev_get_id(rdev)),
|
|
&val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & MCP16502_FLT)
|
|
return REGULATOR_STATUS_ERROR;
|
|
else if (val & MCP16502_ENS)
|
|
return REGULATOR_STATUS_ON;
|
|
else if (!(val & MCP16502_ENS))
|
|
return REGULATOR_STATUS_OFF;
|
|
|
|
return REGULATOR_STATUS_UNDEFINED;
|
|
}
|
|
|
|
static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_sel,
|
|
unsigned int new_sel)
|
|
{
|
|
static const u8 us_ramp[] = { 8, 16, 24, 32 };
|
|
int id = rdev_get_id(rdev);
|
|
unsigned int uV_delta, val;
|
|
int ret;
|
|
|
|
ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = (val & MCP16502_DVSR) >> 2;
|
|
uV_delta = abs(new_sel * rdev->desc->linear_ranges->step -
|
|
old_sel * rdev->desc->linear_ranges->step);
|
|
switch (id) {
|
|
case BUCK1:
|
|
case LDO1:
|
|
case LDO2:
|
|
ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
|
|
mcp16502_ramp_b1l12[val]);
|
|
break;
|
|
|
|
case BUCK2:
|
|
case BUCK3:
|
|
case BUCK4:
|
|
ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
|
|
mcp16502_ramp_b234[val]);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
/*
|
|
* mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
|
|
* mode
|
|
*/
|
|
static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
|
|
{
|
|
switch (pm_suspend_target_state) {
|
|
case PM_SUSPEND_STANDBY:
|
|
return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM);
|
|
case PM_SUSPEND_ON:
|
|
case PM_SUSPEND_MEM:
|
|
return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB);
|
|
default:
|
|
dev_err(&rdev->dev, "invalid suspend target: %d\n",
|
|
pm_suspend_target_state);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* mcp16502_set_suspend_voltage() - regulator_ops set_suspend_voltage
|
|
*/
|
|
static int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
|
{
|
|
int sel = regulator_map_voltage_linear_range(rdev, uV, uV);
|
|
int reg = mcp16502_suspend_get_target_reg(rdev);
|
|
|
|
if (sel < 0)
|
|
return sel;
|
|
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg, MCP16502_VSEL, sel);
|
|
}
|
|
|
|
/*
|
|
* mcp16502_set_suspend_mode() - regulator_ops set_suspend_mode
|
|
*/
|
|
static int mcp16502_set_suspend_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
switch (pm_suspend_target_state) {
|
|
case PM_SUSPEND_STANDBY:
|
|
return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_LPM);
|
|
case PM_SUSPEND_ON:
|
|
case PM_SUSPEND_MEM:
|
|
return _mcp16502_set_mode(rdev, mode, MCP16502_OPMODE_HIB);
|
|
default:
|
|
dev_err(&rdev->dev, "invalid suspend target: %d\n",
|
|
pm_suspend_target_state);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* mcp16502_set_suspend_enable() - regulator_ops set_suspend_enable
|
|
*/
|
|
static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
int reg = mcp16502_suspend_get_target_reg(rdev);
|
|
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, MCP16502_EN);
|
|
}
|
|
|
|
/*
|
|
* mcp16502_set_suspend_disable() - regulator_ops set_suspend_disable
|
|
*/
|
|
static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
int reg = mcp16502_suspend_get_target_reg(rdev);
|
|
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
return regmap_update_bits(rdev->regmap, reg, MCP16502_EN, 0);
|
|
}
|
|
#endif /* CONFIG_SUSPEND */
|
|
|
|
static const struct regulator_ops mcp16502_buck_ops = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.get_status = mcp16502_get_status,
|
|
.set_voltage_time_sel = mcp16502_set_voltage_time_sel,
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
|
|
.set_mode = mcp16502_set_mode,
|
|
.get_mode = mcp16502_get_mode,
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
.set_suspend_voltage = mcp16502_set_suspend_voltage,
|
|
.set_suspend_mode = mcp16502_set_suspend_mode,
|
|
.set_suspend_enable = mcp16502_set_suspend_enable,
|
|
.set_suspend_disable = mcp16502_set_suspend_disable,
|
|
#endif /* CONFIG_SUSPEND */
|
|
};
|
|
|
|
/*
|
|
* LDOs cannot change operating modes.
|
|
*/
|
|
static const struct regulator_ops mcp16502_ldo_ops = {
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
|
.map_voltage = regulator_map_voltage_linear_range,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.get_status = mcp16502_get_status,
|
|
.set_voltage_time_sel = mcp16502_set_voltage_time_sel,
|
|
.set_ramp_delay = regulator_set_ramp_delay_regmap,
|
|
|
|
#ifdef CONFIG_SUSPEND
|
|
.set_suspend_voltage = mcp16502_set_suspend_voltage,
|
|
.set_suspend_enable = mcp16502_set_suspend_enable,
|
|
.set_suspend_disable = mcp16502_set_suspend_disable,
|
|
#endif /* CONFIG_SUSPEND */
|
|
};
|
|
|
|
static const struct of_device_id mcp16502_ids[] = {
|
|
{ .compatible = "microchip,mcp16502", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mcp16502_ids);
|
|
|
|
static const struct linear_range b1l12_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
|
|
};
|
|
|
|
static const struct linear_range b234_ranges[] = {
|
|
REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
|
|
};
|
|
|
|
static const struct regulator_desc mcp16502_desc[] = {
|
|
/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops, ramp_table) */
|
|
MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops,
|
|
mcp16502_ramp_b1l12),
|
|
MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops,
|
|
mcp16502_ramp_b234),
|
|
MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
|
|
mcp16502_ramp_b234),
|
|
MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops,
|
|
mcp16502_ramp_b234),
|
|
MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops,
|
|
mcp16502_ramp_b1l12),
|
|
MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops,
|
|
mcp16502_ramp_b1l12)
|
|
};
|
|
|
|
static const struct regmap_range mcp16502_ranges[] = {
|
|
regmap_reg_range(MCP16502_MIN_REG, MCP16502_MAX_REG)
|
|
};
|
|
|
|
static const struct regmap_access_table mcp16502_yes_reg_table = {
|
|
.yes_ranges = mcp16502_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(mcp16502_ranges),
|
|
};
|
|
|
|
static const struct regmap_config mcp16502_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = MCP16502_MAX_REG,
|
|
.cache_type = REGCACHE_NONE,
|
|
.rd_table = &mcp16502_yes_reg_table,
|
|
.wr_table = &mcp16502_yes_reg_table,
|
|
};
|
|
|
|
static int mcp16502_probe(struct i2c_client *client)
|
|
{
|
|
struct regulator_config config = { };
|
|
struct regulator_dev *rdev;
|
|
struct device *dev;
|
|
struct mcp16502 *mcp;
|
|
struct regmap *rmap;
|
|
int i, ret;
|
|
|
|
dev = &client->dev;
|
|
config.dev = dev;
|
|
|
|
mcp = devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
|
|
if (!mcp)
|
|
return -ENOMEM;
|
|
|
|
rmap = devm_regmap_init_i2c(client, &mcp16502_regmap_config);
|
|
if (IS_ERR(rmap)) {
|
|
ret = PTR_ERR(rmap);
|
|
dev_err(dev, "regmap init failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_clientdata(client, mcp);
|
|
config.regmap = rmap;
|
|
config.driver_data = mcp;
|
|
|
|
mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
|
|
if (IS_ERR(mcp->lpm)) {
|
|
dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
|
|
return PTR_ERR(mcp->lpm);
|
|
}
|
|
|
|
for (i = 0; i < NUM_REGULATORS; i++) {
|
|
rdev = devm_regulator_register(dev, &mcp16502_desc[i], &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(dev,
|
|
"failed to register %s regulator %ld\n",
|
|
mcp16502_desc[i].name, PTR_ERR(rdev));
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mcp16502_suspend_noirq(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mcp16502 *mcp = i2c_get_clientdata(client);
|
|
|
|
mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_LPM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcp16502_resume_noirq(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mcp16502 *mcp = i2c_get_clientdata(client);
|
|
|
|
mcp16502_gpio_set_mode(mcp, MCP16502_OPMODE_ACTIVE);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
static const struct dev_pm_ops mcp16502_pm_ops = {
|
|
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend_noirq,
|
|
mcp16502_resume_noirq)
|
|
};
|
|
#endif
|
|
static const struct i2c_device_id mcp16502_i2c_id[] = {
|
|
{ "mcp16502", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
|
|
|
|
static struct i2c_driver mcp16502_drv = {
|
|
.probe_new = mcp16502_probe,
|
|
.driver = {
|
|
.name = "mcp16502-regulator",
|
|
.of_match_table = of_match_ptr(mcp16502_ids),
|
|
#ifdef CONFIG_PM
|
|
.pm = &mcp16502_pm_ops,
|
|
#endif
|
|
},
|
|
.id_table = mcp16502_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(mcp16502_drv);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MCP16502 PMIC driver");
|
|
MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");
|