mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Jean Delvare](/assets/img/avatar_default.png)
Since commit 0166dc11be
("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
As a minor optimization, this also lets us drop several occurrences of
of_match_ptr(), __maybe_unused and some ifdef guarding, as we now know
what all of this will resolve to, we might as well save cpp some work.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Icenowy Zheng <icenowy@aosc.io>
Link: https://lore.kernel.org/r/20221124144708.64371b98@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
245 lines
5.8 KiB
C
245 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// SY8824C/SY8824E regulator driver
|
|
//
|
|
// Copyright (C) 2019 Synaptics Incorporated
|
|
//
|
|
// Author: Jisheng Zhang <jszhang@kernel.org>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define SY8824C_BUCK_EN (1 << 7)
|
|
#define SY8824C_MODE (1 << 6)
|
|
|
|
struct sy8824_config {
|
|
/* registers */
|
|
unsigned int vol_reg;
|
|
unsigned int mode_reg;
|
|
unsigned int enable_reg;
|
|
/* Voltage range and step(linear) */
|
|
unsigned int vsel_min;
|
|
unsigned int vsel_step;
|
|
unsigned int vsel_count;
|
|
const struct regmap_config *config;
|
|
};
|
|
|
|
struct sy8824_device_info {
|
|
struct device *dev;
|
|
struct regulator_desc desc;
|
|
struct regulator_init_data *regulator;
|
|
const struct sy8824_config *cfg;
|
|
};
|
|
|
|
static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
struct sy8824_device_info *di = rdev_get_drvdata(rdev);
|
|
const struct sy8824_config *cfg = di->cfg;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
regmap_update_bits(rdev->regmap, cfg->mode_reg,
|
|
SY8824C_MODE, SY8824C_MODE);
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
regmap_update_bits(rdev->regmap, cfg->mode_reg,
|
|
SY8824C_MODE, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sy8824_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
struct sy8824_device_info *di = rdev_get_drvdata(rdev);
|
|
const struct sy8824_config *cfg = di->cfg;
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ret = regmap_read(rdev->regmap, cfg->mode_reg, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (val & SY8824C_MODE)
|
|
return REGULATOR_MODE_FAST;
|
|
else
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static const struct regulator_ops sy8824_regulator_ops = {
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
|
.map_voltage = regulator_map_voltage_linear,
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_mode = sy8824_set_mode,
|
|
.get_mode = sy8824_get_mode,
|
|
};
|
|
|
|
static int sy8824_regulator_register(struct sy8824_device_info *di,
|
|
struct regulator_config *config)
|
|
{
|
|
struct regulator_desc *rdesc = &di->desc;
|
|
const struct sy8824_config *cfg = di->cfg;
|
|
struct regulator_dev *rdev;
|
|
|
|
rdesc->name = "sy8824-reg";
|
|
rdesc->supply_name = "vin";
|
|
rdesc->ops = &sy8824_regulator_ops;
|
|
rdesc->type = REGULATOR_VOLTAGE;
|
|
rdesc->n_voltages = cfg->vsel_count;
|
|
rdesc->enable_reg = cfg->enable_reg;
|
|
rdesc->enable_mask = SY8824C_BUCK_EN;
|
|
rdesc->min_uV = cfg->vsel_min;
|
|
rdesc->uV_step = cfg->vsel_step;
|
|
rdesc->vsel_reg = cfg->vol_reg;
|
|
rdesc->vsel_mask = cfg->vsel_count - 1;
|
|
rdesc->owner = THIS_MODULE;
|
|
|
|
rdev = devm_regulator_register(di->dev, &di->desc, config);
|
|
return PTR_ERR_OR_ZERO(rdev);
|
|
}
|
|
|
|
static const struct regmap_config sy8824_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.num_reg_defaults_raw = 1,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static const struct regmap_config sy20276_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.num_reg_defaults_raw = 2,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
static int sy8824_i2c_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct sy8824_device_info *di;
|
|
struct regulator_config config = { };
|
|
struct regmap *regmap;
|
|
int ret;
|
|
|
|
di = devm_kzalloc(dev, sizeof(struct sy8824_device_info), GFP_KERNEL);
|
|
if (!di)
|
|
return -ENOMEM;
|
|
|
|
di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
|
|
if (!di->regulator) {
|
|
dev_err(dev, "Platform data not found!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
di->dev = dev;
|
|
di->cfg = of_device_get_match_data(dev);
|
|
|
|
regmap = devm_regmap_init_i2c(client, di->cfg->config);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(dev, "Failed to allocate regmap!\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
i2c_set_clientdata(client, di);
|
|
|
|
config.dev = di->dev;
|
|
config.init_data = di->regulator;
|
|
config.regmap = regmap;
|
|
config.driver_data = di;
|
|
config.of_node = np;
|
|
|
|
ret = sy8824_regulator_register(di, &config);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to register regulator!\n");
|
|
return ret;
|
|
}
|
|
|
|
static const struct sy8824_config sy8824c_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x00,
|
|
.enable_reg = 0x00,
|
|
.vsel_min = 762500,
|
|
.vsel_step = 12500,
|
|
.vsel_count = 64,
|
|
.config = &sy8824_regmap_config,
|
|
};
|
|
|
|
static const struct sy8824_config sy8824e_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x00,
|
|
.enable_reg = 0x00,
|
|
.vsel_min = 700000,
|
|
.vsel_step = 12500,
|
|
.vsel_count = 64,
|
|
.config = &sy8824_regmap_config,
|
|
};
|
|
|
|
static const struct sy8824_config sy20276_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x01,
|
|
.enable_reg = 0x01,
|
|
.vsel_min = 600000,
|
|
.vsel_step = 10000,
|
|
.vsel_count = 128,
|
|
.config = &sy20276_regmap_config,
|
|
};
|
|
|
|
static const struct sy8824_config sy20278_cfg = {
|
|
.vol_reg = 0x00,
|
|
.mode_reg = 0x01,
|
|
.enable_reg = 0x01,
|
|
.vsel_min = 762500,
|
|
.vsel_step = 12500,
|
|
.vsel_count = 64,
|
|
.config = &sy20276_regmap_config,
|
|
};
|
|
|
|
static const struct of_device_id sy8824_dt_ids[] = {
|
|
{
|
|
.compatible = "silergy,sy8824c",
|
|
.data = &sy8824c_cfg
|
|
},
|
|
{
|
|
.compatible = "silergy,sy8824e",
|
|
.data = &sy8824e_cfg
|
|
},
|
|
{
|
|
.compatible = "silergy,sy20276",
|
|
.data = &sy20276_cfg
|
|
},
|
|
{
|
|
.compatible = "silergy,sy20278",
|
|
.data = &sy20278_cfg
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sy8824_dt_ids);
|
|
|
|
static const struct i2c_device_id sy8824_id[] = {
|
|
{ "sy8824", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sy8824_id);
|
|
|
|
static struct i2c_driver sy8824_regulator_driver = {
|
|
.driver = {
|
|
.name = "sy8824-regulator",
|
|
.of_match_table = sy8824_dt_ids,
|
|
},
|
|
.probe_new = sy8824_i2c_probe,
|
|
.id_table = sy8824_id,
|
|
};
|
|
module_i2c_driver(sy8824_regulator_driver);
|
|
|
|
MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
|
|
MODULE_DESCRIPTION("SY8824C/SY8824E regulator driver");
|
|
MODULE_LICENSE("GPL v2");
|