linux-stable/drivers/xen/xen-pciback/conf_space_header.c
Oleksandr Andrushchenko a67efff288 xen-pciback: allow compiling on other archs than x86
Xen-pciback driver was designed to be built for x86 only. But it
can also be used by other architectures, e.g. Arm.

Currently PCI backend implements multiple functionalities at a time,
such as:
1. It is used as a database for assignable PCI devices, e.g. xl
   pci-assignable-{add|remove|list} manipulates that list. So, whenever
   the toolstack needs to know which PCI devices can be passed through
   it reads that from the relevant sysfs entries of the pciback.
2. It is used to hold the unbound PCI devices list, e.g. when passing
   through a PCI device it needs to be unbound from the relevant device
   driver and bound to pciback (strictly speaking it is not required
   that the device is bound to pciback, but pciback is again used as a
   database of the passed through PCI devices, so we can re-bind the
   devices back to their original drivers when guest domain shuts down)
3. Device reset for the devices being passed through
4. Para-virtualised use-cases support

The para-virtualised part of the driver is not always needed as some
architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend
model for PCI device passthrough.

For such use-cases make the very first step in splitting the
xen-pciback driver into two parts: Xen PCI stub and PCI PV backend
drivers.

For that add new configuration options CONFIG_XEN_PCI_STUB and
CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its
functionality, e.g. no support for para-virtualised scenario.
x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the
fully featured backend driver.

Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-02 08:03:43 -05:00

431 lines
9.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* PCI Backend - Handles the virtual fields in the configuration space headers.
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define dev_fmt pr_fmt
#include <linux/kernel.h>
#include <linux/pci.h>
#include "pciback.h"
#include "conf_space.h"
struct pci_cmd_info {
u16 val;
};
struct pci_bar_info {
u32 val;
u32 len_val;
int which;
};
#define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO))
#define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER)
/* Bits guests are allowed to control in permissive mode. */
#define PCI_COMMAND_GUEST (PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| \
PCI_COMMAND_INVALIDATE|PCI_COMMAND_VGA_PALETTE| \
PCI_COMMAND_WAIT|PCI_COMMAND_FAST_BACK)
static void *command_init(struct pci_dev *dev, int offset)
{
struct pci_cmd_info *cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
int err;
if (!cmd)
return ERR_PTR(-ENOMEM);
err = pci_read_config_word(dev, PCI_COMMAND, &cmd->val);
if (err) {
kfree(cmd);
return ERR_PTR(err);
}
return cmd;
}
static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
{
int ret = pci_read_config_word(dev, offset, value);
const struct pci_cmd_info *cmd = data;
*value &= PCI_COMMAND_GUEST;
*value |= cmd->val & ~PCI_COMMAND_GUEST;
return ret;
}
static int command_write(struct pci_dev *dev, int offset, u16 value, void *data)
{
struct xen_pcibk_dev_data *dev_data;
int err;
u16 val;
struct pci_cmd_info *cmd = data;
dev_data = pci_get_drvdata(dev);
if (!pci_is_enabled(dev) && is_enable_cmd(value)) {
dev_dbg(&dev->dev, "enable\n");
err = pci_enable_device(dev);
if (err)
return err;
if (dev_data)
dev_data->enable_intx = 1;
} else if (pci_is_enabled(dev) && !is_enable_cmd(value)) {
dev_dbg(&dev->dev, "disable\n");
pci_disable_device(dev);
if (dev_data)
dev_data->enable_intx = 0;
}
if (!dev->is_busmaster && is_master_cmd(value)) {
dev_dbg(&dev->dev, "set bus master\n");
pci_set_master(dev);
} else if (dev->is_busmaster && !is_master_cmd(value)) {
dev_dbg(&dev->dev, "clear bus master\n");
pci_clear_master(dev);
}
if (!(cmd->val & PCI_COMMAND_INVALIDATE) &&
(value & PCI_COMMAND_INVALIDATE)) {
dev_dbg(&dev->dev, "enable memory-write-invalidate\n");
err = pci_set_mwi(dev);
if (err) {
dev_warn(&dev->dev, "cannot enable memory-write-invalidate (%d)\n",
err);
value &= ~PCI_COMMAND_INVALIDATE;
}
} else if ((cmd->val & PCI_COMMAND_INVALIDATE) &&
!(value & PCI_COMMAND_INVALIDATE)) {
dev_dbg(&dev->dev, "disable memory-write-invalidate\n");
pci_clear_mwi(dev);
}
if (dev_data && dev_data->allow_interrupt_control) {
if ((cmd->val ^ value) & PCI_COMMAND_INTX_DISABLE) {
if (value & PCI_COMMAND_INTX_DISABLE) {
pci_intx(dev, 0);
} else {
/* Do not allow enabling INTx together with MSI or MSI-X. */
switch (xen_pcibk_get_interrupt_type(dev)) {
case INTERRUPT_TYPE_NONE:
pci_intx(dev, 1);
break;
case INTERRUPT_TYPE_INTX:
break;
default:
return PCIBIOS_SET_FAILED;
}
}
}
}
cmd->val = value;
if (!xen_pcibk_permissive && (!dev_data || !dev_data->permissive))
return 0;
/* Only allow the guest to control certain bits. */
err = pci_read_config_word(dev, offset, &val);
if (err || val == value)
return err;
value &= PCI_COMMAND_GUEST;
value |= val & ~PCI_COMMAND_GUEST;
return pci_write_config_word(dev, offset, value);
}
static int rom_write(struct pci_dev *dev, int offset, u32 value, void *data)
{
struct pci_bar_info *bar = data;
if (unlikely(!bar)) {
dev_warn(&dev->dev, "driver data not found\n");
return XEN_PCI_ERR_op_failed;
}
/* A write to obtain the length must happen as a 32-bit write.
* This does not (yet) support writing individual bytes
*/
if ((value | ~PCI_ROM_ADDRESS_MASK) == ~0U)
bar->which = 1;
else {
u32 tmpval;
pci_read_config_dword(dev, offset, &tmpval);
if (tmpval != bar->val && value == bar->val) {
/* Allow restoration of bar value. */
pci_write_config_dword(dev, offset, bar->val);
}
bar->which = 0;
}
/* Do we need to support enabling/disabling the rom address here? */
return 0;
}
/* For the BARs, only allow writes which write ~0 or
* the correct resource information
* (Needed for when the driver probes the resource usage)
*/
static int bar_write(struct pci_dev *dev, int offset, u32 value, void *data)
{
struct pci_bar_info *bar = data;
unsigned int pos = (offset - PCI_BASE_ADDRESS_0) / 4;
const struct resource *res = dev->resource;
u32 mask;
if (unlikely(!bar)) {
dev_warn(&dev->dev, "driver data not found\n");
return XEN_PCI_ERR_op_failed;
}
/* A write to obtain the length must happen as a 32-bit write.
* This does not (yet) support writing individual bytes
*/
if (res[pos].flags & IORESOURCE_IO)
mask = ~PCI_BASE_ADDRESS_IO_MASK;
else if (pos && (res[pos - 1].flags & IORESOURCE_MEM_64))
mask = 0;
else
mask = ~PCI_BASE_ADDRESS_MEM_MASK;
if ((value | mask) == ~0U)
bar->which = 1;
else {
u32 tmpval;
pci_read_config_dword(dev, offset, &tmpval);
if (tmpval != bar->val && value == bar->val) {
/* Allow restoration of bar value. */
pci_write_config_dword(dev, offset, bar->val);
}
bar->which = 0;
}
return 0;
}
static int bar_read(struct pci_dev *dev, int offset, u32 * value, void *data)
{
struct pci_bar_info *bar = data;
if (unlikely(!bar)) {
dev_warn(&dev->dev, "driver data not found\n");
return XEN_PCI_ERR_op_failed;
}
*value = bar->which ? bar->len_val : bar->val;
return 0;
}
static void *bar_init(struct pci_dev *dev, int offset)
{
unsigned int pos;
const struct resource *res = dev->resource;
struct pci_bar_info *bar = kzalloc(sizeof(*bar), GFP_KERNEL);
if (!bar)
return ERR_PTR(-ENOMEM);
if (offset == PCI_ROM_ADDRESS || offset == PCI_ROM_ADDRESS1)
pos = PCI_ROM_RESOURCE;
else {
pos = (offset - PCI_BASE_ADDRESS_0) / 4;
if (pos && (res[pos - 1].flags & IORESOURCE_MEM_64)) {
/*
* Use ">> 16 >> 16" instead of direct ">> 32" shift
* to avoid warnings on 32-bit architectures.
*/
bar->val = res[pos - 1].start >> 16 >> 16;
bar->len_val = -resource_size(&res[pos - 1]) >> 16 >> 16;
return bar;
}
}
if (!res[pos].flags ||
(res[pos].flags & (IORESOURCE_DISABLED | IORESOURCE_UNSET |
IORESOURCE_BUSY)))
return bar;
bar->val = res[pos].start |
(res[pos].flags & PCI_REGION_FLAG_MASK);
bar->len_val = -resource_size(&res[pos]) |
(res[pos].flags & PCI_REGION_FLAG_MASK);
return bar;
}
static void bar_reset(struct pci_dev *dev, int offset, void *data)
{
struct pci_bar_info *bar = data;
bar->which = 0;
}
static void bar_release(struct pci_dev *dev, int offset, void *data)
{
kfree(data);
}
static int xen_pcibk_read_vendor(struct pci_dev *dev, int offset,
u16 *value, void *data)
{
*value = dev->vendor;
return 0;
}
static int xen_pcibk_read_device(struct pci_dev *dev, int offset,
u16 *value, void *data)
{
*value = dev->device;
return 0;
}
static int interrupt_read(struct pci_dev *dev, int offset, u8 * value,
void *data)
{
*value = (u8) dev->irq;
return 0;
}
static int bist_write(struct pci_dev *dev, int offset, u8 value, void *data)
{
u8 cur_value;
int err;
err = pci_read_config_byte(dev, offset, &cur_value);
if (err)
goto out;
if ((cur_value & ~PCI_BIST_START) == (value & ~PCI_BIST_START)
|| value == PCI_BIST_START)
err = pci_write_config_byte(dev, offset, value);
out:
return err;
}
static const struct config_field header_common[] = {
{
.offset = PCI_VENDOR_ID,
.size = 2,
.u.w.read = xen_pcibk_read_vendor,
},
{
.offset = PCI_DEVICE_ID,
.size = 2,
.u.w.read = xen_pcibk_read_device,
},
{
.offset = PCI_COMMAND,
.size = 2,
.init = command_init,
.release = bar_release,
.u.w.read = command_read,
.u.w.write = command_write,
},
{
.offset = PCI_INTERRUPT_LINE,
.size = 1,
.u.b.read = interrupt_read,
},
{
.offset = PCI_INTERRUPT_PIN,
.size = 1,
.u.b.read = xen_pcibk_read_config_byte,
},
{
/* Any side effects of letting driver domain control cache line? */
.offset = PCI_CACHE_LINE_SIZE,
.size = 1,
.u.b.read = xen_pcibk_read_config_byte,
.u.b.write = xen_pcibk_write_config_byte,
},
{
.offset = PCI_LATENCY_TIMER,
.size = 1,
.u.b.read = xen_pcibk_read_config_byte,
},
{
.offset = PCI_BIST,
.size = 1,
.u.b.read = xen_pcibk_read_config_byte,
.u.b.write = bist_write,
},
{}
};
#define CFG_FIELD_BAR(reg_offset) \
{ \
.offset = reg_offset, \
.size = 4, \
.init = bar_init, \
.reset = bar_reset, \
.release = bar_release, \
.u.dw.read = bar_read, \
.u.dw.write = bar_write, \
}
#define CFG_FIELD_ROM(reg_offset) \
{ \
.offset = reg_offset, \
.size = 4, \
.init = bar_init, \
.reset = bar_reset, \
.release = bar_release, \
.u.dw.read = bar_read, \
.u.dw.write = rom_write, \
}
static const struct config_field header_0[] = {
CFG_FIELD_BAR(PCI_BASE_ADDRESS_0),
CFG_FIELD_BAR(PCI_BASE_ADDRESS_1),
CFG_FIELD_BAR(PCI_BASE_ADDRESS_2),
CFG_FIELD_BAR(PCI_BASE_ADDRESS_3),
CFG_FIELD_BAR(PCI_BASE_ADDRESS_4),
CFG_FIELD_BAR(PCI_BASE_ADDRESS_5),
CFG_FIELD_ROM(PCI_ROM_ADDRESS),
{}
};
static const struct config_field header_1[] = {
CFG_FIELD_BAR(PCI_BASE_ADDRESS_0),
CFG_FIELD_BAR(PCI_BASE_ADDRESS_1),
CFG_FIELD_ROM(PCI_ROM_ADDRESS1),
{}
};
int xen_pcibk_config_header_add_fields(struct pci_dev *dev)
{
int err;
err = xen_pcibk_config_add_fields(dev, header_common);
if (err)
goto out;
switch (dev->hdr_type) {
case PCI_HEADER_TYPE_NORMAL:
err = xen_pcibk_config_add_fields(dev, header_0);
break;
case PCI_HEADER_TYPE_BRIDGE:
err = xen_pcibk_config_add_fields(dev, header_1);
break;
default:
err = -EINVAL;
dev_err(&dev->dev, "Unsupported header type %d!\n",
dev->hdr_type);
break;
}
out:
return err;
}