Vincent Donnefort f7fafd083c leds: leds-ns2: move LED modes mapping outside of the driver ... On the board n090401 (Seagate NAS 4-Bay), the LED mode mapping (GPIO values to LED mode) is different from the one used on other boards supported by the leds-ns2 driver. With this patch the hardcoded mapping is removed from leds-ns2. Now, it must be defined either in the platform data (if an old-fashion board setup file is used) or in the DT node. In order to allow the later, this patch also introduces a modes-map property for the leds-ns2 DT binding. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>		2015-08-28 14:06:06 +02:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h	staging:iio:ad7291: Move out of staging	2014-07-08 21:17:30 +01:00
ad7298.h
ad7303.h
ad7791.h
ad7793.h
ad7887.h
adau17x1.h	ASoC: Add ADAU1381/ADAU1781 audio CODEC support	2014-05-27 20:54:51 +01:00
adau1977.h	ASoC: Add ADAU1977 CODEC driver	2014-02-19 13:36:15 +09:00
ads7828.h
arm-ux500-pm.h
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h	ASoC: Samsung: Add quirk for internal DMA	2014-11-07 10:38:17 +00:00
asoc-s3c24xx_simtec.h	ASoC: s3c24xx: Remove invalid file reference	2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h	ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h	2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h	ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion	2014-01-07 15:36:09 +00:00
at24.h
at91_adc.h	iio: adc: at91_adc: Add support for touchscreens without TSMR	2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h	ata: pata_samsung_cf: removes s5pc100 related ata codes	2014-06-30 10:48:08 -04:00
atmel.h	TTY/Serial driver patches for 3.16-rc1	2014-06-03 09:01:02 -07:00
bcmgenet.h	net: bcmgenet: enable driver to work without a device tree	2014-12-08 20:26:59 -05:00
bd6107.h
bfin_rotary.h	Input: bfin_rotary - move pin lists into into platform data	2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h
bt-nokia-h4p.h	staging/bluetooth: Add hci_h4p driver	2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h
camera-pxa.h
camera-rcar.h
clk-integrator.h	ARM: integrator: switch to fetch clocks from device tree	2014-02-13 11:20:42 +01:00
clk-lpss.h
clk-realview.h
clk-u300.h
clk-ux500.h
coda.h
cpuidle-exynos.h	cpuidle: exynos: add coupled cpuidle support for exynos4210	2015-01-30 08:39:15 +09:00
crypto-atmel.h
crypto-ux500.h
cyttsp4.h
davinci_asp.h	ASoC: davinci-mcasp: Rename platform data struct	2014-02-03 18:26:59 +00:00
db8500_thermal.h
dma-atmel.h
dma-coh901318.h
dma-dw.h	dmaengine: dw: define DW_DMA_MAX_NR_MASTERS	2015-02-04 22:39:44 -08:00
dma-ep93xx.h
dma-hsu.h	dmaengine: append hsu DMA driver	2015-03-07 03:23:02 +01:00
dma-imx-sdma.h	dmaengine: imx-sdma: Add support for version 3 firmware	2015-03-18 13:53:33 +05:30
dma-imx.h	dmaengine: imx-sdma: Add a new DMATYPE for SAI	2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h	dma: mmp_tdma: Fix build for ARM64	2015-02-03 17:47:35 -08:00
dma-mv_xor.h	dma: mv_xor: Cleanup in dma-mv_xor.h header	2014-01-13 13:30:31 +05:30
dma-rcar-hpbdma.h
dma-s3c24xx.h
dma-ste-dma40.h
dmtimer-omap.h
drv260x-pdata.h	Input: drv260x - add TI drv260x haptics driver	2014-08-19 22:19:28 -07:00
dwc3-omap.h
edma.h	ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue	2014-07-28 17:03:13 +05:30
efm32-spi.h
efm32-uart.h
ehci-sh.h
elm.h	nand: omap2: Remove horrible ifdefs to fix module probe	2014-09-22 11:37:51 -07:00
emif_plat.h
eth-netx.h	net: Cleanup in eth-netx.h	2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h
gpio-ath79.h	MIPS: ath79: Add OF support to the GPIO driver	2015-06-21 21:54:09 +02:00
gpio-davinci.h	gpio: remove obsolete tnetv107x driver	2014-03-05 10:44:44 +08:00
gpio-dwapb.h	GPIO: gpio-dwapb: Enable platform driver binding to MFD driver	2014-09-23 17:51:37 +02:00
gpio-em.h
gpio-lpc32xx.h
gpio-omap.h	gpio: omap: Allow building as a loadable module	2015-05-06 15:23:03 +02:00
gpio-rcar.h
gpio-ts5500.h
gpio_backlight.h
hsmmc-omap.h	ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin	2015-03-27 12:19:37 +01:00
hwmon-s3c.h	hwmon: (s3c) Trivial cleanup in hwmon-s3c.h	2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c-davinci.h	i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery	2015-04-10 17:57:28 +02:00
i2c-designware.h	i2c: designware: add support of platform data to set I2C mode	2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h	i2c: s3c2410: Trivial cleanup in header file	2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h	watchdog: add Intel MID watchdog driver support	2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
iommu-omap.h	iommu/omap: Remove platform data da_start and da_end fields	2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h	arm: sa1100: move irda header to linux/platform_data	2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h
isl9305.h	regulator: isl9305: Add Intersil ISL9305/H driver	2014-09-06 12:43:05 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h	Input: update email-id of Rajeev Kumar	2015-05-22 10:59:55 -07:00
keypad-ep93xx.h
keypad-nomadik-ske.h
keypad-omap.h
keypad-pxa27x.h
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h	leds: leds-ns2: move LED modes mapping outside of the driver	2015-08-28 14:06:06 +02:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h
leds-omap.h
leds-pca963x.h
leds-s3c24xx.h	leds: leds-s3c24xx: Trivial cleanup in header file	2014-02-27 09:57:11 -08:00
lm3630a_bl.h
lm3639_bl.h
lp855x.h	backlight: lp855x: Add supply regulator to lp855x	2014-12-09 09:24:45 +00:00
lp8727.h
lp8755.h
lv5207lp.h
macb.h	net/macb: convert to kernel doc	2015-07-27 01:10:29 -07:00
mailbox-omap.h
max197.h	hwmon: (max197) add include guard	2014-01-14 21:36:53 -08:00
max3421-hcd.h	usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity	2014-05-29 11:19:30 -07:00
max6697.h
mfd-mcp-sa11x0.h	mfd: Cleanup mfd-mcp-sa11x0.h header	2014-01-21 08:28:59 +00:00
microread.h
mmc-atmel-mci.h	mmc: atmel-mci: move mach header to platform_data	2014-11-10 12:40:37 +01:00
mmc-davinci.h
mmc-esdhc-imx.h	mmc: sdhci-esdhc-imx: clear f_max in boarddata	2015-07-24 10:18:38 +02:00
mmc-mvsdio.h	mmc: mvsdio: Cleanup mmc-mvsdio.h header	2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h	mmc: omap_hsmmc: remove prepare/complete system suspend support.	2015-01-19 09:56:08 +01:00
mmc-pxamci.h
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
mtd-davinci-aemif.h	ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif	2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h	nand: omap2: Add support for flash-based bad block table	2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h	mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding	2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h	mtd: nand: s3c2410: Trivial cleanup in header file	2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h	mtd: omap2: Cleanup header files	2014-01-11 11:39:18 -08:00
mtd-orion_nand.h	mtd: orion: Cleanup mtd-orion_nand.h header	2014-01-11 11:39:23 -08:00
mv_usb.h
net-cw1200.h
nfcmrvl.h	NFC: nfcmrvl: add UART driver	2015-06-11 23:41:57 +02:00
ntc_thermistor.h	hwmon: (ntc_thermistor) Add support for ncpXXwf104	2015-05-31 22:58:36 -07:00
nxp-nci.h	NFC: nxp-nci: Add support for NXP NCI chips	2015-03-26 11:07:50 +01:00
omap-twl4030.h
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h
pinctrl-single.h
pn544.h
pxa2xx_udc.h
pxa_sdhci.h	mmc: sdhci-pxav3: Move private driver data to driver source	2014-11-10 12:40:31 +01:00
regulator-haptic.h	Input: add regulator haptic driver	2014-12-21 18:59:20 -08:00
remoteproc-omap.h
s3c-hsotg.h
s3c-hsudc.h
sa11x0-serial.h
sc18is602.h
serial-imx.h	serial: imx: drop support for IRDA	2015-03-07 03:26:32 +01:00
serial-omap.h	ARM: OMAP: serial: remove last vestige of DTR_gpio support.	2014-11-10 09:06:44 -08:00
serial-sccnxp.h
sh_ipmmu.h
shmob_drm.h
sht15.h	hwmon: (sht15) add include guard	2014-01-14 21:36:53 -08:00
shtc1.h	hwmon: add support for Sensirion SHTC1 sensor	2014-06-12 08:36:48 -07:00
si5351.h	clk: si5351: Do not pass struct clk in platform_data	2015-05-08 11:22:30 -07:00
simplefb.h
sky81452-backlight.h	backlight: Add support Skyworks SKY81452 backlight driver	2015-03-12 09:08:19 +00:00
spi-clps711x.h
spi-davinci.h
spi-ep93xx.h
spi-imx.h
spi-nuc900.h	spi: nuc900: Cleanup spi-nuc900.h header	2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi-s3c64xx.h	spi/s3c64xx: Trivial cleanup in header file	2014-02-16 09:59:13 +08:00
ssm2518.h
st-nci.h	nfc: st-nci: Rename st21nfcb to st-nci	2015-06-10 12:51:44 +02:00
st21nfca.h	NFC: st21nfca: Adding support for secure element	2015-01-28 00:03:36 +01:00
st33zp24.h	tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)	2015-03-18 22:43:06 +01:00
st1232_pdata.h
st_nci.h	nfc: st-nci: Rename st21nfcb to st-nci	2015-06-10 12:51:44 +02:00
st_sensors_pdata.h
syscon.h	mfd: syscon: Add platform data with a regmap config name	2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h	Input: s3c2410 - trivial cleanup in header file	2014-02-14 00:09:43 -08:00
tsl2563.h
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h	ARM: imx: move EHCI platform defines out of platform_data header	2014-07-18 16:10:04 +08:00
usb-ehci-orion.h	usb: ehci: Cleanup usb-ehci-orion.h header	2014-01-03 12:37:57 -08:00
usb-musb-ux500.h
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
usb-omap1.h
usb-pxa3xx-ulpi.h
usb-rcar-phy.h
usb-s3c2410_udc.h
usb3503.h
ux500_wdt.h
video-clcd-versatile.h	video: fix up versatile CLCD helper move	2014-07-23 17:41:00 +02:00
video-ep93xx.h	video: ep93xx: Cleanup video-ep93xx.h header	2014-01-17 10:57:41 +02:00
video-imxfb.h	video: imxfb: Remove unused fields from platform data structure	2014-02-28 12:35:22 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h	video: pxa: Cleanup video-pxafb.h header	2014-01-17 10:57:42 +02:00
video_s3c.h
voltage-omap.h
wiznet.h
wkup_m3.h	remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3	2015-06-17 09:58:08 +03:00
zforce_ts.h