mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-08-26 10:49:33 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/i2c/busses/i2c-designware-pcidrv.c
Jarkko Nikula 70fb95e213 i2c: designware-pci: Add support for Elkhart Lake PSE I2C 
Add support for Intel(R) Programmable Services Engine (Intel(R) PSE) I2C
controller in Intel Elkhart Lake when interface is assigned to the host
processor.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-08-29 22:10:01 +02:00

379 lines
9.1 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
* Copyright (C) 2011, 2015, 2016 Intel Corporation.
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include "i2c-designware-core.h"
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
medfield,
merrifield,
baytrail,
cherrytrail,
haswell,
elkhartlake,
};
struct dw_scl_sda_cfg {
u32 ss_hcnt;
u32 fs_hcnt;
u32 ss_lcnt;
u32 fs_lcnt;
u32 sda_hold;
};
struct dw_pci_controller {
u32 bus_num;
u32 bus_cfg;
u32 tx_fifo_depth;
u32 rx_fifo_depth;
u32 clk_khz;
u32 functionality;
u32 flags;
struct dw_scl_sda_cfg *scl_sda_cfg;
int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
};
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
DW_IC_CON_SLAVE_DISABLE | \
DW_IC_CON_RESTART_EN)
/* Merrifield HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg mrfld_config = {
.ss_hcnt = 0x2f8,
.fs_hcnt = 0x87,
.ss_lcnt = 0x37b,
.fs_lcnt = 0x10a,
};
/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
.ss_hcnt = 0x200,
.fs_hcnt = 0x55,
.ss_lcnt = 0x200,
.fs_lcnt = 0x99,
.sda_hold = 0x6,
};
/* Haswell HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg hsw_config = {
.ss_hcnt = 0x01b0,
.fs_hcnt = 0x48,
.ss_lcnt = 0x01fb,
.fs_lcnt = 0xa0,
.sda_hold = 0x9,
};
static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
switch (pdev->device) {
case 0x0817:
c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
c->bus_cfg |= DW_IC_CON_SPEED_STD;
/* fall through */
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
return 0;
case 0x082C:
case 0x082D:
case 0x082E:
c->bus_num = pdev->device - 0x82C + 0;
return 0;
}
return -ENODEV;
}
static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
/*
* On Intel Merrifield the user visible i2c busses are enumerated
* [1..7]. So, we add 1 to shift the default range. Besides that the
* first PCI slot provides 4 functions, that's why we have to add 0 to
* the first slot and 4 to the next one.
*/
switch (PCI_SLOT(pdev->devfn)) {
case 8:
c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
return 0;
case 9:
c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
return 0;
}
return -ENODEV;
}
static struct dw_pci_controller dw_pci_controllers[] = {
[medfield] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.clk_khz = 25000,
.setup = mfld_setup,
},
[merrifield] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 64,
.rx_fifo_depth = 64,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &mrfld_config,
.setup = mrfld_setup,
},
[baytrail] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &byt_config,
},
[haswell] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &hsw_config,
},
[cherrytrail] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.flags = MODEL_CHERRYTRAIL,
.scl_sda_cfg = &byt_config,
},
[elkhartlake] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.clk_khz = 100000,
},
};
#ifdef CONFIG_PM
static int i2c_dw_pci_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
i_dev->suspended = true;
i_dev->disable(i_dev);
return 0;
}
static int i2c_dw_pci_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
int ret;
ret = i_dev->init(i_dev);
i_dev->suspended = false;
return ret;
}
#endif
static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
i2c_dw_pci_resume, NULL);
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return dev->controller->clk_khz;
}
static int i2c_dw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
int r;
struct dw_pci_controller *controller;
struct dw_scl_sda_cfg *cfg;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
id->driver_data);
return -EINVAL;
}
controller = &dw_pci_controllers[id->driver_data];
r = pcim_enable_device(pdev);
if (r) {
dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
r);
return r;
}
pci_set_master(pdev);
r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
if (r) {
dev_err(&pdev->dev, "I/O memory remapping failed\n");
return r;
}
dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (r < 0)
return r;
dev->clk = NULL;
dev->controller = controller;
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
dev->irq = pci_irq_vector(pdev, 0);
dev->flags |= controller->flags;
if (controller->setup) {
r = controller->setup(pdev, controller);
if (r) {
pci_free_irq_vectors(pdev);
return r;
}
}
dev->functionality = controller->functionality |
DW_IC_DEFAULT_FUNCTIONALITY;
dev->master_cfg = controller->bus_cfg;
if (controller->scl_sda_cfg) {
cfg = controller->scl_sda_cfg;
dev->ss_hcnt = cfg->ss_hcnt;
dev->fs_hcnt = cfg->fs_hcnt;
dev->ss_lcnt = cfg->ss_lcnt;
dev->fs_lcnt = cfg->fs_lcnt;
dev->sda_hold_time = cfg->sda_hold;
}
pci_set_drvdata(pdev, dev);
dev->tx_fifo_depth = controller->tx_fifo_depth;
dev->rx_fifo_depth = controller->rx_fifo_depth;
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = 0;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->nr = controller->bus_num;
r = i2c_dw_probe(dev);
if (r) {
pci_free_irq_vectors(pdev);
return r;
}
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
dev->disable(dev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
i2c_del_adapter(&dev->adapter);
pci_free_irq_vectors(pdev);
}
/* work with hotplug and coldplug */
MODULE_ALIAS("i2c_designware-pci");
static const struct pci_device_id i2_designware_pci_ids[] = {
/* Medfield */
{ PCI_VDEVICE(INTEL, 0x0817), medfield },
{ PCI_VDEVICE(INTEL, 0x0818), medfield },
{ PCI_VDEVICE(INTEL, 0x0819), medfield },
{ PCI_VDEVICE(INTEL, 0x082C), medfield },
{ PCI_VDEVICE(INTEL, 0x082D), medfield },
{ PCI_VDEVICE(INTEL, 0x082E), medfield },
/* Merrifield */
{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
/* Baytrail */
{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
/* Braswell / Cherrytrail */
{ PCI_VDEVICE(INTEL, 0x22C1), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
/* Elkhart Lake (PSE I2C) */
{ PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bba), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
static struct pci_driver dw_i2c_driver = {
.name = DRIVER_NAME,
.id_table = i2_designware_pci_ids,
.probe = i2c_dw_pci_probe,
.remove = i2c_dw_pci_remove,
.driver = {
.pm = &i2c_dw_pm_ops,
},
};
module_pci_driver(dw_i2c_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink