mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Wolfram Sang](/assets/img/avatar_default.png)
Move from the deprecated i2c_new_probed_device() to the new i2c_new_scanned_device(). Make use of the new ERRPTR if suitable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Max Staudt <max@enpas.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
229 lines
6 KiB
C
229 lines
6 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* I2C driver for stand-alone PCF8584 style adapters on Zorro cards
|
|
*
|
|
* Original ICY documentation can be found on Aminet:
|
|
* https://aminet.net/package/docs/hard/icy
|
|
*
|
|
* There has been a modern community re-print of this design in 2019:
|
|
* https://www.a1k.org/forum/index.php?threads/70106/
|
|
*
|
|
* The card is basically a Philips PCF8584 connected straight to the
|
|
* beginning of the AutoConfig'd address space (register S1 on base+2),
|
|
* with /INT on /INT2 on the Zorro bus.
|
|
*
|
|
* Copyright (c) 2019 Max Staudt <max@enpas.org>
|
|
*
|
|
* This started as a fork of i2c-elektor.c and has evolved since.
|
|
* Thanks go to its authors for providing a base to grow on.
|
|
*
|
|
*
|
|
* IRQ support is currently not implemented.
|
|
*
|
|
* As it turns out, i2c-algo-pcf is really written with i2c-elektor's
|
|
* edge-triggered ISA interrupts in mind, while the Amiga's Zorro bus has
|
|
* level-triggered interrupts. This means that once an interrupt occurs, we
|
|
* have to tell the PCF8584 to shut up immediately, or it will keep the
|
|
* interrupt line busy and cause an IRQ storm.
|
|
|
|
* However, because of the PCF8584's host-side protocol, there is no good
|
|
* way to just quieten it without side effects. Rather, we have to perform
|
|
* the next read/write operation straight away, which will reset the /INT
|
|
* pin. This entails re-designing the core of i2c-algo-pcf in the future.
|
|
* For now, we never request an IRQ from the PCF8584, and poll it instead.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-pcf.h>
|
|
|
|
#include <asm/amigaints.h>
|
|
#include <linux/zorro.h>
|
|
|
|
#include "../algos/i2c-algo-pcf.h"
|
|
|
|
struct icy_i2c {
|
|
struct i2c_adapter adapter;
|
|
|
|
void __iomem *reg_s0;
|
|
void __iomem *reg_s1;
|
|
struct fwnode_handle *ltc2990_fwnode;
|
|
struct i2c_client *ltc2990_client;
|
|
};
|
|
|
|
/*
|
|
* Functions called by i2c-algo-pcf
|
|
*/
|
|
static void icy_pcf_setpcf(void *data, int ctl, int val)
|
|
{
|
|
struct icy_i2c *i2c = (struct icy_i2c *)data;
|
|
|
|
u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0;
|
|
|
|
z_writeb(val, address);
|
|
}
|
|
|
|
static int icy_pcf_getpcf(void *data, int ctl)
|
|
{
|
|
struct icy_i2c *i2c = (struct icy_i2c *)data;
|
|
|
|
u8 __iomem *address = ctl ? i2c->reg_s1 : i2c->reg_s0;
|
|
|
|
return z_readb(address);
|
|
}
|
|
|
|
static int icy_pcf_getown(void *data)
|
|
{
|
|
return 0x55;
|
|
}
|
|
|
|
static int icy_pcf_getclock(void *data)
|
|
{
|
|
return 0x1c;
|
|
}
|
|
|
|
static void icy_pcf_waitforpin(void *data)
|
|
{
|
|
usleep_range(50, 150);
|
|
}
|
|
|
|
/*
|
|
* Main i2c-icy part
|
|
*/
|
|
static unsigned short const icy_ltc2990_addresses[] = {
|
|
0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END
|
|
};
|
|
|
|
/*
|
|
* Additional sensors exposed once this property is applied:
|
|
*
|
|
* in1 will be the voltage of the 5V rail, divided by 2.
|
|
* in2 will be the voltage of the 12V rail, divided by 4.
|
|
* temp3 will be measured using a PCB loop next the chip.
|
|
*/
|
|
static const u32 icy_ltc2990_meas_mode[] = {0, 3};
|
|
|
|
static const struct property_entry icy_ltc2990_props[] = {
|
|
PROPERTY_ENTRY_U32_ARRAY("lltc,meas-mode", icy_ltc2990_meas_mode),
|
|
{ }
|
|
};
|
|
|
|
static int icy_probe(struct zorro_dev *z,
|
|
const struct zorro_device_id *ent)
|
|
{
|
|
struct icy_i2c *i2c;
|
|
struct i2c_algo_pcf_data *algo_data;
|
|
struct fwnode_handle *new_fwnode;
|
|
struct i2c_board_info ltc2990_info = {
|
|
.type = "ltc2990",
|
|
};
|
|
|
|
i2c = devm_kzalloc(&z->dev, sizeof(*i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
algo_data = devm_kzalloc(&z->dev, sizeof(*algo_data), GFP_KERNEL);
|
|
if (!algo_data)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&z->dev, i2c);
|
|
i2c->adapter.dev.parent = &z->dev;
|
|
i2c->adapter.owner = THIS_MODULE;
|
|
/* i2c->adapter.algo assigned by i2c_pcf_add_bus() */
|
|
i2c->adapter.algo_data = algo_data;
|
|
strlcpy(i2c->adapter.name, "ICY I2C Zorro adapter",
|
|
sizeof(i2c->adapter.name));
|
|
|
|
if (!devm_request_mem_region(&z->dev,
|
|
z->resource.start,
|
|
4, i2c->adapter.name))
|
|
return -ENXIO;
|
|
|
|
/* Driver private data */
|
|
i2c->reg_s0 = ZTWO_VADDR(z->resource.start);
|
|
i2c->reg_s1 = ZTWO_VADDR(z->resource.start + 2);
|
|
|
|
algo_data->data = i2c;
|
|
algo_data->setpcf = icy_pcf_setpcf;
|
|
algo_data->getpcf = icy_pcf_getpcf;
|
|
algo_data->getown = icy_pcf_getown;
|
|
algo_data->getclock = icy_pcf_getclock;
|
|
algo_data->waitforpin = icy_pcf_waitforpin;
|
|
|
|
if (i2c_pcf_add_bus(&i2c->adapter)) {
|
|
dev_err(&z->dev, "i2c_pcf_add_bus() failed\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
dev_info(&z->dev, "ICY I2C controller at %pa, IRQ not implemented\n",
|
|
&z->resource.start);
|
|
|
|
/*
|
|
* The 2019 a1k.org PCBs have an LTC2990 at 0x4c, so start
|
|
* it automatically once ltc2990 is modprobed.
|
|
*
|
|
* in0 is the voltage of the internal 5V power supply.
|
|
* temp1 is the temperature inside the chip.
|
|
*
|
|
* See property_entry above for in1, in2, temp3.
|
|
*/
|
|
new_fwnode = fwnode_create_software_node(icy_ltc2990_props, NULL);
|
|
if (IS_ERR(new_fwnode)) {
|
|
dev_info(&z->dev, "Failed to create fwnode for LTC2990, error: %ld\n",
|
|
PTR_ERR(new_fwnode));
|
|
} else {
|
|
/*
|
|
* Store the fwnode so we can destroy it on .remove().
|
|
* Only store it on success, as fwnode_remove_software_node()
|
|
* is NULL safe, but not PTR_ERR safe.
|
|
*/
|
|
i2c->ltc2990_fwnode = new_fwnode;
|
|
ltc2990_info.fwnode = new_fwnode;
|
|
|
|
i2c->ltc2990_client =
|
|
i2c_new_scanned_device(&i2c->adapter,
|
|
<c2990_info,
|
|
icy_ltc2990_addresses,
|
|
NULL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void icy_remove(struct zorro_dev *z)
|
|
{
|
|
struct icy_i2c *i2c = dev_get_drvdata(&z->dev);
|
|
|
|
i2c_unregister_device(i2c->ltc2990_client);
|
|
fwnode_remove_software_node(i2c->ltc2990_fwnode);
|
|
|
|
i2c_del_adapter(&i2c->adapter);
|
|
}
|
|
|
|
static const struct zorro_device_id icy_zorro_tbl[] = {
|
|
{ ZORRO_ID(VMC, 15, 0), },
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(zorro, icy_zorro_tbl);
|
|
|
|
static struct zorro_driver icy_driver = {
|
|
.name = "i2c-icy",
|
|
.id_table = icy_zorro_tbl,
|
|
.probe = icy_probe,
|
|
.remove = icy_remove,
|
|
};
|
|
|
|
module_driver(icy_driver,
|
|
zorro_register_driver,
|
|
zorro_unregister_driver);
|
|
|
|
MODULE_AUTHOR("Max Staudt <max@enpas.org>");
|
|
MODULE_DESCRIPTION("I2C bus via PCF8584 on ICY Zorro card");
|
|
MODULE_LICENSE("GPL v2");
|