mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Joe Perches](/assets/img/avatar_default.png)
Simplify and make consistent the current uses of inb/outb by using the newly introduced arcnet_<I/O> equivalents. o Add new #defines for register offsets There is an register offset, 8, that is unnamed and used as-is. o Remove old #defines that included the ioaddr o Remove obfuscating macros by expanding them in-place where appropriate o Create static inline com20020_set_subaddress for the SET_SUBADR macro There is an unused arcnet config entry CONFIGSA100_CT6001 which added a special #define BUS_ALIGN which was introduced but never used in fullhist git tree commit 22cfce4b82b0 ("[ARCNET]: Fixes.") in Nov 2004 for Linux v2.6.10. This BUS_ALIGN #define tries to allow 8 bit devices to work on a 16 bit bus by aligning addresses to 16 bit boundaries. Move this currently unused CONFIG_SA1100_CT6001 BUS_ALIGN macro from com20020.h to arcdevice.h. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
322 lines
7.5 KiB
C
322 lines
7.5 KiB
C
/*
|
|
* Linux ARCnet driver - COM20020 PCMCIA support
|
|
*
|
|
* Written 1994-1999 by Avery Pennarun,
|
|
* based on an ISA version by David Woodhouse.
|
|
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
|
|
* which was derived from pcnet_cs.c by David Hinds.
|
|
* Some additional portions derived from skeleton.c by Donald Becker.
|
|
*
|
|
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
|
|
* for sponsoring the further development of this driver.
|
|
*
|
|
* **********************
|
|
*
|
|
* The original copyright of skeleton.c was as follows:
|
|
*
|
|
* skeleton.c Written 1993 by Donald Becker.
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency. This software may only be used
|
|
* and distributed according to the terms of the GNU General Public License as
|
|
* modified by SRC, incorporated herein by reference.
|
|
*
|
|
* **********************
|
|
* Changes:
|
|
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
|
|
* - reorganize kmallocs in com20020_attach, checking all for failure
|
|
* and releasing the previous allocations if one fails
|
|
* **********************
|
|
*
|
|
* For more details, see drivers/net/arcnet.c
|
|
*
|
|
* **********************
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/io.h>
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/ds.h>
|
|
|
|
#include "arcdevice.h"
|
|
#include "com20020.h"
|
|
|
|
static void regdump(struct net_device *dev)
|
|
{
|
|
#ifdef DEBUG
|
|
int ioaddr = dev->base_addr;
|
|
int count;
|
|
|
|
netdev_dbg(dev, "register dump:\n");
|
|
for (count = 0; count < 16; count++) {
|
|
if (!(count % 16))
|
|
pr_cont("%04X:", ioaddr + count);
|
|
pr_cont(" %02X", arcnet_inb(ioaddr, count));
|
|
}
|
|
pr_cont("\n");
|
|
|
|
netdev_dbg(dev, "buffer0 dump:\n");
|
|
/* set up the address register */
|
|
count = 0;
|
|
arcnet_outb((count >> 8) | RDDATAflag | AUTOINCflag,
|
|
ioaddr, com20020_REG_W_ADDR_HI);
|
|
arcnet_outb(count & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
|
|
|
|
for (count = 0; count < 256 + 32; count++) {
|
|
if (!(count % 16))
|
|
pr_cont("%04X:", count);
|
|
|
|
/* copy the data */
|
|
pr_cont(" %02X", arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA));
|
|
}
|
|
pr_cont("\n");
|
|
#endif
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
/* Parameters that can be set with 'insmod' */
|
|
|
|
static int node;
|
|
static int timeout = 3;
|
|
static int backplane;
|
|
static int clockp;
|
|
static int clockm;
|
|
|
|
module_param(node, int, 0);
|
|
module_param(timeout, int, 0);
|
|
module_param(backplane, int, 0);
|
|
module_param(clockp, int, 0);
|
|
module_param(clockm, int, 0);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*====================================================================*/
|
|
|
|
static int com20020_config(struct pcmcia_device *link);
|
|
static void com20020_release(struct pcmcia_device *link);
|
|
|
|
static void com20020_detach(struct pcmcia_device *p_dev);
|
|
|
|
/*====================================================================*/
|
|
|
|
static int com20020_probe(struct pcmcia_device *p_dev)
|
|
{
|
|
struct com20020_dev *info;
|
|
struct net_device *dev;
|
|
struct arcnet_local *lp;
|
|
|
|
dev_dbg(&p_dev->dev, "com20020_attach()\n");
|
|
|
|
/* Create new network device */
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
goto fail_alloc_info;
|
|
|
|
dev = alloc_arcdev("");
|
|
if (!dev)
|
|
goto fail_alloc_dev;
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->timeout = timeout;
|
|
lp->backplane = backplane;
|
|
lp->clockp = clockp;
|
|
lp->clockm = clockm & 3;
|
|
lp->hw.owner = THIS_MODULE;
|
|
|
|
/* fill in our module parameters as defaults */
|
|
dev->dev_addr[0] = node;
|
|
|
|
p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
|
|
p_dev->resource[0]->end = 16;
|
|
p_dev->config_flags |= CONF_ENABLE_IRQ;
|
|
|
|
info->dev = dev;
|
|
p_dev->priv = info;
|
|
|
|
return com20020_config(p_dev);
|
|
|
|
fail_alloc_dev:
|
|
kfree(info);
|
|
fail_alloc_info:
|
|
return -ENOMEM;
|
|
} /* com20020_attach */
|
|
|
|
static void com20020_detach(struct pcmcia_device *link)
|
|
{
|
|
struct com20020_dev *info = link->priv;
|
|
struct net_device *dev = info->dev;
|
|
|
|
dev_dbg(&link->dev, "detach...\n");
|
|
|
|
dev_dbg(&link->dev, "com20020_detach\n");
|
|
|
|
dev_dbg(&link->dev, "unregister...\n");
|
|
|
|
unregister_netdev(dev);
|
|
|
|
/* this is necessary because we register our IRQ separately
|
|
* from card services.
|
|
*/
|
|
if (dev->irq)
|
|
free_irq(dev->irq, dev);
|
|
|
|
com20020_release(link);
|
|
|
|
/* Unlink device structure, free bits */
|
|
dev_dbg(&link->dev, "unlinking...\n");
|
|
if (link->priv) {
|
|
dev = info->dev;
|
|
if (dev) {
|
|
dev_dbg(&link->dev, "kfree...\n");
|
|
free_netdev(dev);
|
|
}
|
|
dev_dbg(&link->dev, "kfree2...\n");
|
|
kfree(info);
|
|
}
|
|
|
|
} /* com20020_detach */
|
|
|
|
static int com20020_config(struct pcmcia_device *link)
|
|
{
|
|
struct arcnet_local *lp;
|
|
struct com20020_dev *info;
|
|
struct net_device *dev;
|
|
int i, ret;
|
|
int ioaddr;
|
|
|
|
info = link->priv;
|
|
dev = info->dev;
|
|
|
|
dev_dbg(&link->dev, "config...\n");
|
|
|
|
dev_dbg(&link->dev, "com20020_config\n");
|
|
|
|
dev_dbg(&link->dev, "baseport1 is %Xh\n",
|
|
(unsigned int)link->resource[0]->start);
|
|
|
|
i = -ENODEV;
|
|
link->io_lines = 16;
|
|
|
|
if (!link->resource[0]->start) {
|
|
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) {
|
|
link->resource[0]->start = ioaddr;
|
|
i = pcmcia_request_io(link);
|
|
if (i == 0)
|
|
break;
|
|
}
|
|
} else {
|
|
i = pcmcia_request_io(link);
|
|
}
|
|
|
|
if (i != 0) {
|
|
dev_dbg(&link->dev, "requestIO failed totally!\n");
|
|
goto failed;
|
|
}
|
|
|
|
ioaddr = dev->base_addr = link->resource[0]->start;
|
|
dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
|
|
|
|
dev_dbg(&link->dev, "request IRQ %d\n",
|
|
link->irq);
|
|
if (!link->irq) {
|
|
dev_dbg(&link->dev, "requestIRQ failed totally!\n");
|
|
goto failed;
|
|
}
|
|
|
|
dev->irq = link->irq;
|
|
|
|
ret = pcmcia_enable_device(link);
|
|
if (ret)
|
|
goto failed;
|
|
|
|
if (com20020_check(dev)) {
|
|
regdump(dev);
|
|
goto failed;
|
|
}
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->card_name = "PCMCIA COM20020";
|
|
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
|
|
|
|
SET_NETDEV_DEV(dev, &link->dev);
|
|
|
|
i = com20020_found(dev, 0); /* calls register_netdev */
|
|
|
|
if (i != 0) {
|
|
dev_notice(&link->dev,
|
|
"com20020_found() failed\n");
|
|
goto failed;
|
|
}
|
|
|
|
netdev_dbg(dev, "port %#3lx, irq %d\n",
|
|
dev->base_addr, dev->irq);
|
|
return 0;
|
|
|
|
failed:
|
|
dev_dbg(&link->dev, "com20020_config failed...\n");
|
|
com20020_release(link);
|
|
return -ENODEV;
|
|
} /* com20020_config */
|
|
|
|
static void com20020_release(struct pcmcia_device *link)
|
|
{
|
|
dev_dbg(&link->dev, "com20020_release\n");
|
|
pcmcia_disable_device(link);
|
|
}
|
|
|
|
static int com20020_suspend(struct pcmcia_device *link)
|
|
{
|
|
struct com20020_dev *info = link->priv;
|
|
struct net_device *dev = info->dev;
|
|
|
|
if (link->open)
|
|
netif_device_detach(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int com20020_resume(struct pcmcia_device *link)
|
|
{
|
|
struct com20020_dev *info = link->priv;
|
|
struct net_device *dev = info->dev;
|
|
|
|
if (link->open) {
|
|
int ioaddr = dev->base_addr;
|
|
struct arcnet_local *lp = netdev_priv(dev);
|
|
|
|
arcnet_outb(lp->config | 0x80, ioaddr, COM20020_REG_W_CONFIG);
|
|
udelay(5);
|
|
arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pcmcia_device_id com20020_ids[] = {
|
|
PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
|
|
"PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
|
|
PCMCIA_DEVICE_PROD_ID12("SoHard AG",
|
|
"SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
|
|
PCMCIA_DEVICE_NULL
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
|
|
|
|
static struct pcmcia_driver com20020_cs_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "com20020_cs",
|
|
.probe = com20020_probe,
|
|
.remove = com20020_detach,
|
|
.id_table = com20020_ids,
|
|
.suspend = com20020_suspend,
|
|
.resume = com20020_resume,
|
|
};
|
|
module_pcmcia_driver(com20020_cs_driver);
|