mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-08-26 19:00:25 +00:00
Code Issues Releases Wiki Activity
linux-stable/drivers/scsi/mvsas/mv_sas.h
Linus Torvalds ba6d10ab80 SCSI misc on 20190709 
This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
 mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
 removal of the osst driver (I heard from Willem privately that he
 would like the driver removed because all his test hardware has
 failed).  Plus number of minor changes, spelling fixes and other
 trivia.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTl4yYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdcxAQDCJVbd
 fPUX76/V1ldupunF97+3DTharxxbst+VnkOnCwD8D4c0KFFFOI9+F36cnMGCPegE
 fjy17dQLvsJ4GsidHy8=
 =aS5B
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...
2019-07-11 15:14:01 -07:00

465 lines
13 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Marvell 88SE64xx/88SE94xx main function head file
*
* Copyright 2007 Red Hat, Inc.
* Copyright 2008 Marvell. <kewei@marvell.com>
* Copyright 2009-2011 Marvell. <yuxiangl@marvell.com>
*/
#ifndef _MV_SAS_H_
#define _MV_SAS_H_
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/unaligned.h>
#include <scsi/libsas.h>
#include <scsi/scsi.h>
#include <scsi/scsi_tcq.h>
#include <scsi/sas_ata.h>
#include "mv_defs.h"
#define DRV_NAME "mvsas"
#define DRV_VERSION "0.8.16"
#define MVS_ID_NOT_MAPPED 0x7f
#define WIDE_PORT_MAX_PHY 4
#define mv_printk(fmt, arg ...) \
printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg)
#ifdef MV_DEBUG
#define mv_dprintk(format, arg...) \
printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg)
#else
#define mv_dprintk(format, arg...)
#endif
#define MV_MAX_U32 0xffffffff
extern int interrupt_coalescing;
extern struct mvs_tgt_initiator mvs_tgt;
extern struct mvs_info *tgt_mvi;
extern const struct mvs_dispatch mvs_64xx_dispatch;
extern const struct mvs_dispatch mvs_94xx_dispatch;
#define bit(n) ((u64)1 << n)
#define for_each_phy(__lseq_mask, __mc, __lseq) \
for ((__mc) = (__lseq_mask), (__lseq) = 0; \
(__mc) != 0 ; \
(++__lseq), (__mc) >>= 1)
#define MVS_PHY_ID (1U << sas_phy->id)
#define MV_INIT_DELAYED_WORK(w, f, d) INIT_DELAYED_WORK(w, f)
#define UNASSOC_D2H_FIS(id) \
((void *) mvi->rx_fis + 0x100 * id)
#define SATA_RECEIVED_FIS_LIST(reg_set) \
((void *) mvi->rx_fis + mvi->chip->fis_offs + 0x100 * reg_set)
#define SATA_RECEIVED_SDB_FIS(reg_set) \
(SATA_RECEIVED_FIS_LIST(reg_set) + 0x58)
#define SATA_RECEIVED_D2H_FIS(reg_set) \
(SATA_RECEIVED_FIS_LIST(reg_set) + 0x40)
#define SATA_RECEIVED_PIO_FIS(reg_set) \
(SATA_RECEIVED_FIS_LIST(reg_set) + 0x20)
#define SATA_RECEIVED_DMA_FIS(reg_set) \
(SATA_RECEIVED_FIS_LIST(reg_set) + 0x00)
enum dev_status {
MVS_DEV_NORMAL = 0x0,
MVS_DEV_EH = 0x1,
};
enum dev_reset {
MVS_SOFT_RESET = 0,
MVS_HARD_RESET = 1,
MVS_PHY_TUNE = 2,
};
struct mvs_info;
struct mvs_prv_info;
struct mvs_dispatch {
char *name;
int (*chip_init)(struct mvs_info *mvi);
int (*spi_init)(struct mvs_info *mvi);
int (*chip_ioremap)(struct mvs_info *mvi);
void (*chip_iounmap)(struct mvs_info *mvi);
irqreturn_t (*isr)(struct mvs_info *mvi, int irq, u32 stat);
u32 (*isr_status)(struct mvs_info *mvi, int irq);
void (*interrupt_enable)(struct mvs_info *mvi);
void (*interrupt_disable)(struct mvs_info *mvi);
u32 (*read_phy_ctl)(struct mvs_info *mvi, u32 port);
void (*write_phy_ctl)(struct mvs_info *mvi, u32 port, u32 val);
u32 (*read_port_cfg_data)(struct mvs_info *mvi, u32 port);
void (*write_port_cfg_data)(struct mvs_info *mvi, u32 port, u32 val);
void (*write_port_cfg_addr)(struct mvs_info *mvi, u32 port, u32 addr);
u32 (*read_port_vsr_data)(struct mvs_info *mvi, u32 port);
void (*write_port_vsr_data)(struct mvs_info *mvi, u32 port, u32 val);
void (*write_port_vsr_addr)(struct mvs_info *mvi, u32 port, u32 addr);
u32 (*read_port_irq_stat)(struct mvs_info *mvi, u32 port);
void (*write_port_irq_stat)(struct mvs_info *mvi, u32 port, u32 val);
u32 (*read_port_irq_mask)(struct mvs_info *mvi, u32 port);
void (*write_port_irq_mask)(struct mvs_info *mvi, u32 port, u32 val);
void (*command_active)(struct mvs_info *mvi, u32 slot_idx);
void (*clear_srs_irq)(struct mvs_info *mvi, u8 reg_set, u8 clear_all);
void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type,
u32 tfs);
void (*start_delivery)(struct mvs_info *mvi, u32 tx);
u32 (*rx_update)(struct mvs_info *mvi);
void (*int_full)(struct mvs_info *mvi);
u8 (*assign_reg_set)(struct mvs_info *mvi, u8 *tfs);
void (*free_reg_set)(struct mvs_info *mvi, u8 *tfs);
u32 (*prd_size)(void);
u32 (*prd_count)(void);
void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
void (*detect_porttype)(struct mvs_info *mvi, int i);
int (*oob_done)(struct mvs_info *mvi, int i);
void (*fix_phy_info)(struct mvs_info *mvi, int i,
struct sas_identify_frame *id);
void (*phy_work_around)(struct mvs_info *mvi, int i);
void (*phy_set_link_rate)(struct mvs_info *mvi, u32 phy_id,
struct sas_phy_linkrates *rates);
u32 (*phy_max_link_rate)(void);
void (*phy_disable)(struct mvs_info *mvi, u32 phy_id);
void (*phy_enable)(struct mvs_info *mvi, u32 phy_id);
void (*phy_reset)(struct mvs_info *mvi, u32 phy_id, int hard);
void (*stp_reset)(struct mvs_info *mvi, u32 phy_id);
void (*clear_active_cmds)(struct mvs_info *mvi);
u32 (*spi_read_data)(struct mvs_info *mvi);
void (*spi_write_data)(struct mvs_info *mvi, u32 data);
int (*spi_buildcmd)(struct mvs_info *mvi,
u32 *dwCmd,
u8 cmd,
u8 read,
u8 length,
u32 addr
);
int (*spi_issuecmd)(struct mvs_info *mvi, u32 cmd);
int (*spi_waitdataready)(struct mvs_info *mvi, u32 timeout);
void (*dma_fix)(struct mvs_info *mvi, u32 phy_mask,
int buf_len, int from, void *prd);
void (*tune_interrupt)(struct mvs_info *mvi, u32 time);
void (*non_spec_ncq_error)(struct mvs_info *mvi);
int (*gpio_write)(struct mvs_prv_info *mvs_prv, u8 reg_type,
u8 reg_index, u8 reg_count, u8 *write_data);
};
struct mvs_chip_info {
u32 n_host;
u32 n_phy;
u32 fis_offs;
u32 fis_count;
u32 srs_sz;
u32 sg_width;
u32 slot_width;
const struct mvs_dispatch *dispatch;
};
#define MVS_MAX_SG (1U << mvi->chip->sg_width)
#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
#define MVS_RX_FISL_SZ \
(mvi->chip->fis_offs + (mvi->chip->fis_count * 0x100))
#define MVS_CHIP_DISP (mvi->chip->dispatch)
struct mvs_err_info {
__le32 flags;
__le32 flags2;
};
struct mvs_cmd_hdr {
__le32 flags; /* PRD tbl len; SAS, SATA ctl */
__le32 lens; /* cmd, max resp frame len */
__le32 tags; /* targ port xfer tag; tag */
__le32 data_len; /* data xfer len */
__le64 cmd_tbl; /* command table address */
__le64 open_frame; /* open addr frame address */
__le64 status_buf; /* status buffer address */
__le64 prd_tbl; /* PRD tbl address */
__le32 reserved[4];
};
struct mvs_port {
struct asd_sas_port sas_port;
u8 port_attached;
u8 wide_port_phymap;
struct list_head list;
};
struct mvs_phy {
struct mvs_info *mvi;
struct mvs_port *port;
struct asd_sas_phy sas_phy;
struct sas_identify identify;
struct scsi_device *sdev;
struct timer_list timer;
u64 dev_sas_addr;
u64 att_dev_sas_addr;
u32 att_dev_info;
u32 dev_info;
u32 phy_type;
u32 phy_status;
u32 irq_status;
u32 frame_rcvd_size;
u8 frame_rcvd[32];
u8 phy_attached;
u8 phy_mode;
u8 reserved[2];
u32 phy_event;
enum sas_linkrate minimum_linkrate;
enum sas_linkrate maximum_linkrate;
};
struct mvs_device {
struct list_head dev_entry;
enum sas_device_type dev_type;
struct mvs_info *mvi_info;
struct domain_device *sas_device;
u32 attached_phy;
u32 device_id;
u32 running_req;
u8 taskfileset;
u8 dev_status;
u16 reserved;
};
/* Generate PHY tunning parameters */
struct phy_tuning {
/* 1 bit, transmitter emphasis enable */
u8 trans_emp_en:1;
/* 4 bits, transmitter emphasis amplitude */
u8 trans_emp_amp:4;
/* 3 bits, reserved space */
u8 Reserved_2bit_1:3;
/* 5 bits, transmitter amplitude */
u8 trans_amp:5;
/* 2 bits, transmitter amplitude adjust */
u8 trans_amp_adj:2;
/* 1 bit, reserved space */
u8 resv_2bit_2:1;
/* 2 bytes, reserved space */
u8 reserved[2];
};
struct ffe_control {
/* 4 bits, FFE Capacitor Select (value range 0~F) */
u8 ffe_cap_sel:4;
/* 3 bits, FFE Resistor Select (value range 0~7) */
u8 ffe_rss_sel:3;
/* 1 bit reserve*/
u8 reserved:1;
};
/*
* HBA_Info_Page is saved in Flash/NVRAM, total 256 bytes.
* The data area is valid only Signature="MRVL".
* If any member fills with 0xFF, the member is invalid.
*/
struct hba_info_page {
/* Dword 0 */
/* 4 bytes, structure signature,should be "MRVL" at first initial */
u8 signature[4];
/* Dword 1-13 */
u32 reserved1[13];
/* Dword 14-29 */
/* 64 bytes, SAS address for each port */
u64 sas_addr[8];
/* Dword 30-31 */
/* 8 bytes for vanir 8 port PHY FFE seeting
* BIT 0~3 : FFE Capacitor select(value range 0~F)
* BIT 4~6 : FFE Resistor select(value range 0~7)
* BIT 7: reserve.
*/
struct ffe_control ffe_ctl[8];
/* Dword 32 -43 */
u32 reserved2[12];
/* Dword 44-45 */
/* 8 bytes, 0: 1.5G, 1: 3.0G, should be 0x01 at first initial */
u8 phy_rate[8];
/* Dword 46-53 */
/* 32 bytes, PHY tuning parameters for each PHY*/
struct phy_tuning phy_tuning[8];
/* Dword 54-63 */
u32 reserved3[10];
}; /* total 256 bytes */
struct mvs_slot_info {
struct list_head entry;
union {
struct sas_task *task;
void *tdata;
};
u32 n_elem;
u32 tx;
u32 slot_tag;
/* DMA buffer for storing cmd tbl, open addr frame, status buffer,
* and PRD table
*/
void *buf;
dma_addr_t buf_dma;
void *response;
struct mvs_port *port;
struct mvs_device *device;
void *open_frame;
};
struct mvs_info {
unsigned long flags;
/* host-wide lock */
spinlock_t lock;
/* our device */
struct pci_dev *pdev;
struct device *dev;
/* enhanced mode registers */
void __iomem *regs;
/* peripheral or soc registers */
void __iomem *regs_ex;
u8 sas_addr[SAS_ADDR_SIZE];
/* SCSI/SAS glue */
struct sas_ha_struct *sas;
struct Scsi_Host *shost;
/* TX (delivery) DMA ring */
__le32 *tx;
dma_addr_t tx_dma;
/* cached next-producer idx */
u32 tx_prod;
/* RX (completion) DMA ring */
__le32 *rx;
dma_addr_t rx_dma;
/* RX consumer idx */
u32 rx_cons;
/* RX'd FIS area */
__le32 *rx_fis;
dma_addr_t rx_fis_dma;
/* DMA command header slots */
struct mvs_cmd_hdr *slot;
dma_addr_t slot_dma;
u32 chip_id;
const struct mvs_chip_info *chip;
int tags_num;
unsigned long *tags;
/* further per-slot information */
struct mvs_phy phy[MVS_MAX_PHYS];
struct mvs_port port[MVS_MAX_PHYS];
u32 id;
u64 sata_reg_set;
struct list_head *hba_list;
struct list_head soc_entry;
struct list_head wq_list;
unsigned long instance;
u16 flashid;
u32 flashsize;
u32 flashsectSize;
void *addon;
struct hba_info_page hba_info_param;
struct mvs_device devices[MVS_MAX_DEVICES];
void *bulk_buffer;
dma_addr_t bulk_buffer_dma;
void *bulk_buffer1;
dma_addr_t bulk_buffer_dma1;
#define TRASH_BUCKET_SIZE 0x20000
void *dma_pool;
struct mvs_slot_info slot_info[0];
};
struct mvs_prv_info{
u8 n_host;
u8 n_phy;
u8 scan_finished;
u8 reserve;
struct mvs_info *mvi[2];
struct tasklet_struct mv_tasklet;
};
struct mvs_wq {
struct delayed_work work_q;
struct mvs_info *mvi;
void *data;
int handler;
struct list_head entry;
};
struct mvs_task_exec_info {
struct sas_task *task;
struct mvs_cmd_hdr *hdr;
struct mvs_port *port;
u32 tag;
int n_elem;
};
/******************** function prototype *********************/
void mvs_get_sas_addr(void *buf, u32 buflen);
void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
void mvs_tag_free(struct mvs_info *mvi, u32 tag);
void mvs_tag_set(struct mvs_info *mvi, unsigned int tag);
int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out);
void mvs_tag_init(struct mvs_info *mvi);
void mvs_iounmap(void __iomem *regs);
int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex);
void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard);
int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
void *funcdata);
void mvs_set_sas_addr(struct mvs_info *mvi, int port_id, u32 off_lo,
u32 off_hi, u64 sas_addr);
void mvs_scan_start(struct Scsi_Host *shost);
int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
int mvs_queue_command(struct sas_task *task, gfp_t gfp_flags);
int mvs_abort_task(struct sas_task *task);
int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
int mvs_clear_aca(struct domain_device *dev, u8 *lun);
int mvs_clear_task_set(struct domain_device *dev, u8 * lun);
void mvs_port_formed(struct asd_sas_phy *sas_phy);
void mvs_port_deformed(struct asd_sas_phy *sas_phy);
int mvs_dev_found(struct domain_device *dev);
void mvs_dev_gone(struct domain_device *dev);
int mvs_lu_reset(struct domain_device *dev, u8 *lun);
int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags);
int mvs_I_T_nexus_reset(struct domain_device *dev);
int mvs_query_task(struct sas_task *task);
void mvs_release_task(struct mvs_info *mvi,
struct domain_device *dev);
void mvs_do_release_task(struct mvs_info *mvi, int phy_no,
struct domain_device *dev);
void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
struct mvs_device *mvs_find_dev_by_reg_set(struct mvs_info *mvi, u8 reg_set);
int mvs_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
u8 reg_count, u8 *write_data);
#endif
Reference in a new issue View git blame Copy permalink