linux-stable/drivers/usb/musb/cppi_dma.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

147 lines
3.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (C) 2005-2006 by Texas Instruments */
#ifndef _CPPI_DMA_H_
#define _CPPI_DMA_H_
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/dmapool.h>
#include <linux/dmaengine.h>
#include "musb_core.h"
#include "musb_dma.h"
/* CPPI RX/TX state RAM */
struct cppi_tx_stateram {
u32 tx_head; /* "DMA packet" head descriptor */
u32 tx_buf;
u32 tx_current; /* current descriptor */
u32 tx_buf_current;
u32 tx_info; /* flags, remaining buflen */
u32 tx_rem_len;
u32 tx_dummy; /* unused */
u32 tx_complete;
};
struct cppi_rx_stateram {
u32 rx_skipbytes;
u32 rx_head;
u32 rx_sop; /* "DMA packet" head descriptor */
u32 rx_current; /* current descriptor */
u32 rx_buf_current;
u32 rx_len_len;
u32 rx_cnt_cnt;
u32 rx_complete;
};
/* hw_options bits in CPPI buffer descriptors */
#define CPPI_SOP_SET ((u32)(1 << 31))
#define CPPI_EOP_SET ((u32)(1 << 30))
#define CPPI_OWN_SET ((u32)(1 << 29)) /* owned by cppi */
#define CPPI_EOQ_MASK ((u32)(1 << 28))
#define CPPI_ZERO_SET ((u32)(1 << 23)) /* rx saw zlp; tx issues one */
#define CPPI_RXABT_MASK ((u32)(1 << 19)) /* need more rx buffers */
#define CPPI_RECV_PKTLEN_MASK 0xFFFF
#define CPPI_BUFFER_LEN_MASK 0xFFFF
#define CPPI_TEAR_READY ((u32)(1 << 31))
/* CPPI data structure definitions */
#define CPPI_DESCRIPTOR_ALIGN 16 /* bytes; 5-dec docs say 4-byte align */
struct cppi_descriptor {
/* hardware overlay */
u32 hw_next; /* next buffer descriptor Pointer */
u32 hw_bufp; /* i/o buffer pointer */
u32 hw_off_len; /* buffer_offset16, buffer_length16 */
u32 hw_options; /* flags: SOP, EOP etc*/
struct cppi_descriptor *next;
dma_addr_t dma; /* address of this descriptor */
u32 buflen; /* for RX: original buffer length */
} __attribute__ ((aligned(CPPI_DESCRIPTOR_ALIGN)));
struct cppi;
/* CPPI Channel Control structure */
struct cppi_channel {
struct dma_channel channel;
/* back pointer to the DMA controller structure */
struct cppi *controller;
/* which direction of which endpoint? */
struct musb_hw_ep *hw_ep;
bool transmit;
u8 index;
/* DMA modes: RNDIS or "transparent" */
u8 is_rndis;
/* book keeping for current transfer request */
dma_addr_t buf_dma;
u32 buf_len;
u32 maxpacket;
u32 offset; /* dma requested */
void __iomem *state_ram; /* CPPI state */
struct cppi_descriptor *freelist;
/* BD management fields */
struct cppi_descriptor *head;
struct cppi_descriptor *tail;
struct cppi_descriptor *last_processed;
/* use tx_complete in host role to track endpoints waiting for
* FIFONOTEMPTY to clear.
*/
struct list_head tx_complete;
};
/* CPPI DMA controller object */
struct cppi {
struct dma_controller controller;
void __iomem *mregs; /* Mentor regs */
void __iomem *tibase; /* TI/CPPI regs */
int irq;
struct cppi_channel tx[4];
struct cppi_channel rx[4];
struct dma_pool *pool;
struct list_head tx_complete;
};
/* CPPI IRQ handler */
extern irqreturn_t cppi_interrupt(int, void *);
struct cppi41_dma_channel {
struct dma_channel channel;
struct cppi41_dma_controller *controller;
struct musb_hw_ep *hw_ep;
struct dma_chan *dc;
dma_cookie_t cookie;
u8 port_num;
u8 is_tx;
u8 is_allocated;
u8 usb_toggle;
dma_addr_t buf_addr;
u32 total_len;
u32 prog_len;
u32 transferred;
u32 packet_sz;
struct list_head tx_check;
int tx_zlp;
};
#endif /* end of ifndef _CPPI_DMA_H_ */