mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Srinivas Kandagatla](/assets/img/avatar_default.png)
This patch moves to nvmem support in the driver to use callback instead of regmap. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
288 lines
7.2 KiB
C
288 lines
7.2 KiB
C
/*
|
|
* NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
|
|
*
|
|
* Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-provider.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
/* Registers */
|
|
#define LPC18XX_EEPROM_AUTOPROG 0x00c
|
|
#define LPC18XX_EEPROM_AUTOPROG_WORD 0x1
|
|
|
|
#define LPC18XX_EEPROM_CLKDIV 0x014
|
|
|
|
#define LPC18XX_EEPROM_PWRDWN 0x018
|
|
#define LPC18XX_EEPROM_PWRDWN_NO 0x0
|
|
#define LPC18XX_EEPROM_PWRDWN_YES 0x1
|
|
|
|
#define LPC18XX_EEPROM_INTSTAT 0xfe0
|
|
#define LPC18XX_EEPROM_INTSTAT_END_OF_PROG BIT(2)
|
|
|
|
#define LPC18XX_EEPROM_INTSTATCLR 0xfe8
|
|
#define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST BIT(2)
|
|
|
|
/* Fixed page size (bytes) */
|
|
#define LPC18XX_EEPROM_PAGE_SIZE 0x80
|
|
|
|
/* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
|
|
#define LPC18XX_EEPROM_CLOCK_HZ 1500000
|
|
|
|
/* EEPROM requires 3 ms of erase/program time between each writing */
|
|
#define LPC18XX_EEPROM_PROGRAM_TIME 3
|
|
|
|
struct lpc18xx_eeprom_dev {
|
|
struct clk *clk;
|
|
void __iomem *reg_base;
|
|
void __iomem *mem_base;
|
|
struct nvmem_device *nvmem;
|
|
unsigned reg_bytes;
|
|
unsigned val_bytes;
|
|
int size;
|
|
};
|
|
|
|
static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
|
|
u32 reg, u32 val)
|
|
{
|
|
writel(val, eeprom->reg_base + reg);
|
|
}
|
|
|
|
static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
|
|
u32 reg)
|
|
{
|
|
return readl(eeprom->reg_base + reg);
|
|
}
|
|
|
|
static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
|
|
{
|
|
unsigned long end;
|
|
u32 val;
|
|
|
|
/* Wait until EEPROM program operation has finished */
|
|
end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
|
|
|
|
while (time_is_after_jiffies(end)) {
|
|
val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
|
|
|
|
if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
|
|
LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
|
|
return 0;
|
|
}
|
|
|
|
usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
|
|
(LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int lpc18xx_eeprom_gather_write(void *context, unsigned int reg,
|
|
void *val, size_t bytes)
|
|
{
|
|
struct lpc18xx_eeprom_dev *eeprom = context;
|
|
unsigned int offset = reg;
|
|
int ret;
|
|
|
|
/*
|
|
* The last page contains the EEPROM initialization data and is not
|
|
* writable.
|
|
*/
|
|
if ((reg > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE) ||
|
|
(reg + bytes > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE))
|
|
return -EINVAL;
|
|
|
|
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
|
|
LPC18XX_EEPROM_PWRDWN_NO);
|
|
|
|
/* Wait 100 us while the EEPROM wakes up */
|
|
usleep_range(100, 200);
|
|
|
|
while (bytes) {
|
|
writel(*(u32 *)val, eeprom->mem_base + offset);
|
|
ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
bytes -= eeprom->val_bytes;
|
|
val += eeprom->val_bytes;
|
|
offset += eeprom->val_bytes;
|
|
}
|
|
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
|
|
LPC18XX_EEPROM_PWRDWN_YES);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpc18xx_eeprom_read(void *context, unsigned int offset,
|
|
void *val, size_t bytes)
|
|
{
|
|
struct lpc18xx_eeprom_dev *eeprom = context;
|
|
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
|
|
LPC18XX_EEPROM_PWRDWN_NO);
|
|
|
|
/* Wait 100 us while the EEPROM wakes up */
|
|
usleep_range(100, 200);
|
|
|
|
while (bytes) {
|
|
*(u32 *)val = readl(eeprom->mem_base + offset);
|
|
bytes -= eeprom->val_bytes;
|
|
val += eeprom->val_bytes;
|
|
offset += eeprom->val_bytes;
|
|
}
|
|
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
|
|
LPC18XX_EEPROM_PWRDWN_YES);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct nvmem_config lpc18xx_nvmem_config = {
|
|
.name = "lpc18xx-eeprom",
|
|
.stride = 4,
|
|
.word_size = 4,
|
|
.reg_read = lpc18xx_eeprom_read,
|
|
.reg_write = lpc18xx_eeprom_gather_write,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int lpc18xx_eeprom_probe(struct platform_device *pdev)
|
|
{
|
|
struct lpc18xx_eeprom_dev *eeprom;
|
|
struct device *dev = &pdev->dev;
|
|
struct reset_control *rst;
|
|
unsigned long clk_rate;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
|
|
if (!eeprom)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
|
|
eeprom->reg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(eeprom->reg_base))
|
|
return PTR_ERR(eeprom->reg_base);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
|
|
eeprom->mem_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(eeprom->mem_base))
|
|
return PTR_ERR(eeprom->mem_base);
|
|
|
|
eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
|
|
if (IS_ERR(eeprom->clk)) {
|
|
dev_err(&pdev->dev, "failed to get eeprom clock\n");
|
|
return PTR_ERR(eeprom->clk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(eeprom->clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
rst = devm_reset_control_get(dev, NULL);
|
|
if (IS_ERR(rst)) {
|
|
dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
|
|
ret = PTR_ERR(rst);
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = reset_control_assert(rst);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to assert reset: %d\n", ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
eeprom->val_bytes = 4;
|
|
eeprom->reg_bytes = 4;
|
|
|
|
/*
|
|
* Clock rate is generated by dividing the system bus clock by the
|
|
* division factor, contained in the divider register (minus 1 encoded).
|
|
*/
|
|
clk_rate = clk_get_rate(eeprom->clk);
|
|
clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
|
|
|
|
/*
|
|
* Writing a single word to the page will start the erase/program cycle
|
|
* automatically
|
|
*/
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
|
|
LPC18XX_EEPROM_AUTOPROG_WORD);
|
|
|
|
lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
|
|
LPC18XX_EEPROM_PWRDWN_YES);
|
|
|
|
eeprom->size = resource_size(res);
|
|
lpc18xx_nvmem_config.size = resource_size(res);
|
|
lpc18xx_nvmem_config.dev = dev;
|
|
lpc18xx_nvmem_config.priv = eeprom;
|
|
|
|
eeprom->nvmem = nvmem_register(&lpc18xx_nvmem_config);
|
|
if (IS_ERR(eeprom->nvmem)) {
|
|
ret = PTR_ERR(eeprom->nvmem);
|
|
goto err_clk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, eeprom);
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_disable_unprepare(eeprom->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int lpc18xx_eeprom_remove(struct platform_device *pdev)
|
|
{
|
|
struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = nvmem_unregister(eeprom->nvmem);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
clk_disable_unprepare(eeprom->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id lpc18xx_eeprom_of_match[] = {
|
|
{ .compatible = "nxp,lpc1857-eeprom" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
|
|
|
|
static struct platform_driver lpc18xx_eeprom_driver = {
|
|
.probe = lpc18xx_eeprom_probe,
|
|
.remove = lpc18xx_eeprom_remove,
|
|
.driver = {
|
|
.name = "lpc18xx-eeprom",
|
|
.of_match_table = lpc18xx_eeprom_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(lpc18xx_eeprom_driver);
|
|
|
|
MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
|
|
MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
|
|
MODULE_LICENSE("GPL v2");
|