mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
![Alan Cox](/assets/img/avatar_default.png)
A couple of distributions (Fedora, Ubuntu) were having weird problems with the ATI IXP series PATA controllers being reported as simplex. At the heart of the problem is that both distros ignored the recommendations to load pata_acpi and ata_generic *AFTER* specific host drivers. The underlying cause however is that if you D3 and then D0 an ATI IXP it helpfully throws away some configuration and won't let you rewrite it. Add checks to ata_generic and pata_acpi to pin ATIIXP devices. Possibly the real answer here is to quirk them and pin them, but right now we can't do that before they've been pcim_enable()'d by a driver. I'm indebted to David Gero for this. His bug report not only reported the problem but identified the cause correctly and he had tested the right values to prove what was going on [If you backport this for 2.6.24 you will need to pull in the 2.6.25 removal of the bogus WARN_ON() in pcim_enagle] Signed-off-by: Alan Cox <alan@redhat.com> Tested-by: David Gero <davidg@havidave.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
305 lines
7 KiB
C
305 lines
7 KiB
C
/*
|
|
* ACPI PATA driver
|
|
*
|
|
* (c) 2007 Red Hat <alan@redhat.com>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <acpi/acpi_bus.h>
|
|
#include <acpi/acnames.h>
|
|
#include <acpi/acnamesp.h>
|
|
#include <acpi/acparser.h>
|
|
#include <acpi/acexcep.h>
|
|
#include <acpi/acmacros.h>
|
|
#include <acpi/actypes.h>
|
|
|
|
#include <linux/libata.h>
|
|
#include <linux/ata.h>
|
|
|
|
#define DRV_NAME "pata_acpi"
|
|
#define DRV_VERSION "0.2.3"
|
|
|
|
struct pata_acpi {
|
|
struct ata_acpi_gtm gtm;
|
|
void *last;
|
|
unsigned long mask[2];
|
|
};
|
|
|
|
/**
|
|
* pacpi_pre_reset - check for 40/80 pin
|
|
* @ap: Port
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Perform the PATA port setup we need.
|
|
*/
|
|
|
|
static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
|
|
return -ENODEV;
|
|
|
|
return ata_sff_prereset(link, deadline);
|
|
}
|
|
|
|
/**
|
|
* pacpi_cable_detect - cable type detection
|
|
* @ap: port to detect
|
|
*
|
|
* Perform device specific cable detection
|
|
*/
|
|
|
|
static int pacpi_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
|
|
if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
|
|
return ATA_CBL_PATA80;
|
|
else
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* pacpi_discover_modes - filter non ACPI modes
|
|
* @adev: ATA device
|
|
* @mask: proposed modes
|
|
*
|
|
* Try the modes available and see which ones the ACPI method will
|
|
* set up sensibly. From this we get a mask of ACPI modes we can use
|
|
*/
|
|
|
|
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
struct ata_acpi_gtm probe;
|
|
unsigned int xfer_mask;
|
|
|
|
probe = acpi->gtm;
|
|
|
|
ata_acpi_gtm(ap, &probe);
|
|
|
|
xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
|
|
|
|
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
|
|
ap->cbl = ATA_CBL_PATA80;
|
|
|
|
return xfer_mask;
|
|
}
|
|
|
|
/**
|
|
* pacpi_mode_filter - mode filter for ACPI
|
|
* @adev: device
|
|
* @mask: mask of valid modes
|
|
*
|
|
* Filter the valid mode list according to our own specific rules, in
|
|
* this case the list of discovered valid modes obtained by ACPI probing
|
|
*/
|
|
|
|
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
|
|
{
|
|
struct pata_acpi *acpi = adev->link->ap->private_data;
|
|
return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
|
|
}
|
|
|
|
/**
|
|
* pacpi_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*/
|
|
|
|
static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int unit = adev->devno;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
const struct ata_timing *t;
|
|
|
|
if (!(acpi->gtm.flags & 0x10))
|
|
unit = 0;
|
|
|
|
/* Now stuff the nS values into the structure */
|
|
t = ata_timing_find_mode(adev->pio_mode);
|
|
acpi->gtm.drive[unit].pio = t->cycle;
|
|
ata_acpi_stm(ap, &acpi->gtm);
|
|
/* See what mode we actually got */
|
|
ata_acpi_gtm(ap, &acpi->gtm);
|
|
}
|
|
|
|
/**
|
|
* pacpi_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*/
|
|
|
|
static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int unit = adev->devno;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
const struct ata_timing *t;
|
|
|
|
if (!(acpi->gtm.flags & 0x10))
|
|
unit = 0;
|
|
|
|
/* Now stuff the nS values into the structure */
|
|
t = ata_timing_find_mode(adev->dma_mode);
|
|
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
acpi->gtm.drive[unit].dma = t->udma;
|
|
acpi->gtm.flags |= (1 << (2 * unit));
|
|
} else {
|
|
acpi->gtm.drive[unit].dma = t->cycle;
|
|
acpi->gtm.flags &= ~(1 << (2 * unit));
|
|
}
|
|
ata_acpi_stm(ap, &acpi->gtm);
|
|
/* See what mode we actually got */
|
|
ata_acpi_gtm(ap, &acpi->gtm);
|
|
}
|
|
|
|
/**
|
|
* pacpi_qc_issue - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* neccessary.
|
|
*/
|
|
|
|
static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
struct pata_acpi *acpi = ap->private_data;
|
|
|
|
if (acpi->gtm.flags & 0x10)
|
|
return ata_sff_qc_issue(qc);
|
|
|
|
if (adev != acpi->last) {
|
|
pacpi_set_piomode(ap, adev);
|
|
if (adev->dma_mode)
|
|
pacpi_set_dmamode(ap, adev);
|
|
acpi->last = adev;
|
|
}
|
|
return ata_sff_qc_issue(qc);
|
|
}
|
|
|
|
/**
|
|
* pacpi_port_start - port setup
|
|
* @ap: ATA port being set up
|
|
*
|
|
* Use the port_start hook to maintain private control structures
|
|
*/
|
|
|
|
static int pacpi_port_start(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct pata_acpi *acpi;
|
|
|
|
int ret;
|
|
|
|
if (ap->acpi_handle == NULL)
|
|
return -ENODEV;
|
|
|
|
acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
|
|
if (ap->private_data == NULL)
|
|
return -ENOMEM;
|
|
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
|
|
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
|
|
ret = ata_sff_port_start(ap);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct scsi_host_template pacpi_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations pacpi_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.qc_issue = pacpi_qc_issue,
|
|
.cable_detect = pacpi_cable_detect,
|
|
.mode_filter = pacpi_mode_filter,
|
|
.set_piomode = pacpi_set_piomode,
|
|
.set_dmamode = pacpi_set_dmamode,
|
|
.prereset = pacpi_pre_reset,
|
|
.port_start = pacpi_port_start,
|
|
};
|
|
|
|
|
|
/**
|
|
* pacpi_init_one - Register ACPI ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in pacpi_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.udma_mask = 0x7f,
|
|
|
|
.port_ops = &pacpi_ops,
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, NULL };
|
|
if (pdev->vendor == PCI_VENDOR_ID_ATI) {
|
|
int rc = pcim_enable_device(pdev);
|
|
if (rc < 0)
|
|
return rc;
|
|
pcim_pin_device(pdev);
|
|
}
|
|
return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
|
|
}
|
|
|
|
static const struct pci_device_id pacpi_pci_tbl[] = {
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver pacpi_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pacpi_pci_tbl,
|
|
.probe = pacpi_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init pacpi_init(void)
|
|
{
|
|
return pci_register_driver(&pacpi_pci_driver);
|
|
}
|
|
|
|
static void __exit pacpi_exit(void)
|
|
{
|
|
pci_unregister_driver(&pacpi_pci_driver);
|
|
}
|
|
|
|
module_init(pacpi_init);
|
|
module_exit(pacpi_exit);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|