linux-stable/drivers/mmc/host/sdhci-esdhc.h
Yangbo Lu 011fde4839 mmc: sdhci-of-esdhc: make sure delay chain locked for HS400
For eMMC HS400 mode initialization, the DLL reset is a required step
if DLL is enabled to use previously, like in bootloader.
This step has not been documented in reference manual, but the RM will
be fixed sooner or later.

This patch is to add the step of DLL reset, and make sure delay chain
locked for HS400.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201020081116.20918-1-yangbo.lu@nxp.com
Fixes: 54e08d9a95 ("mmc: sdhci-of-esdhc: add hs400 mode support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-28 11:07:01 +01:00

109 lines
3 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Freescale eSDHC controller driver generics for OF and pltfm.
*
* Copyright (c) 2007 Freescale Semiconductor, Inc.
* Copyright (c) 2009 MontaVista Software, Inc.
* Copyright (c) 2010 Pengutronix e.K.
* Copyright 2020 NXP
* Author: Wolfram Sang <kernel@pengutronix.de>
*/
#ifndef _DRIVERS_MMC_SDHCI_ESDHC_H
#define _DRIVERS_MMC_SDHCI_ESDHC_H
/*
* Ops and quirks for the Freescale eSDHC controller.
*/
#define ESDHC_DEFAULT_QUIRKS (SDHCI_QUIRK_FORCE_BLK_SZ_2048 | \
SDHCI_QUIRK_32BIT_DMA_ADDR | \
SDHCI_QUIRK_NO_BUSY_IRQ | \
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | \
SDHCI_QUIRK_PIO_NEEDS_DELAY | \
SDHCI_QUIRK_NO_HISPD_BIT)
/* pltfm-specific */
#define ESDHC_HOST_CONTROL_LE 0x20
/*
* eSDHC register definition
*/
/* Present State Register */
#define ESDHC_PRSSTAT 0x24
#define ESDHC_CLOCK_GATE_OFF 0x00000080
#define ESDHC_CLOCK_STABLE 0x00000008
/* Protocol Control Register */
#define ESDHC_PROCTL 0x28
#define ESDHC_VOLT_SEL 0x00000400
#define ESDHC_CTRL_4BITBUS (0x1 << 1)
#define ESDHC_CTRL_8BITBUS (0x2 << 1)
#define ESDHC_CTRL_BUSWIDTH_MASK (0x3 << 1)
#define ESDHC_HOST_CONTROL_RES 0x01
/* System Control Register */
#define ESDHC_SYSTEM_CONTROL 0x2c
#define ESDHC_CLOCK_MASK 0x0000fff0
#define ESDHC_PREDIV_SHIFT 8
#define ESDHC_DIVIDER_SHIFT 4
#define ESDHC_CLOCK_SDCLKEN 0x00000008
#define ESDHC_CLOCK_PEREN 0x00000004
#define ESDHC_CLOCK_HCKEN 0x00000002
#define ESDHC_CLOCK_IPGEN 0x00000001
/* System Control 2 Register */
#define ESDHC_SYSTEM_CONTROL_2 0x3c
#define ESDHC_SMPCLKSEL 0x00800000
#define ESDHC_EXTN 0x00400000
/* Host Controller Capabilities Register 2 */
#define ESDHC_CAPABILITIES_1 0x114
/* Tuning Block Control Register */
#define ESDHC_TBCTL 0x120
#define ESDHC_HS400_WNDW_ADJUST 0x00000040
#define ESDHC_HS400_MODE 0x00000010
#define ESDHC_TB_EN 0x00000004
#define ESDHC_TB_MODE_MASK 0x00000003
#define ESDHC_TB_MODE_SW 0x00000003
#define ESDHC_TB_MODE_3 0x00000002
#define ESDHC_TBSTAT 0x124
#define ESDHC_TBPTR 0x128
#define ESDHC_WNDW_STRT_PTR_SHIFT 8
#define ESDHC_WNDW_STRT_PTR_MASK (0x7f << 8)
#define ESDHC_WNDW_END_PTR_MASK 0x7f
/* SD Clock Control Register */
#define ESDHC_SDCLKCTL 0x144
#define ESDHC_LPBK_CLK_SEL 0x80000000
#define ESDHC_CMD_CLK_CTL 0x00008000
/* SD Timing Control Register */
#define ESDHC_SDTIMNGCTL 0x148
#define ESDHC_FLW_CTL_BG 0x00008000
/* DLL Config 0 Register */
#define ESDHC_DLLCFG0 0x160
#define ESDHC_DLL_ENABLE 0x80000000
#define ESDHC_DLL_RESET 0x40000000
#define ESDHC_DLL_FREQ_SEL 0x08000000
/* DLL Config 1 Register */
#define ESDHC_DLLCFG1 0x164
#define ESDHC_DLL_PD_PULSE_STRETCH_SEL 0x80000000
/* DLL Status 0 Register */
#define ESDHC_DLLSTAT0 0x170
#define ESDHC_DLL_STS_SLV_LOCK 0x08000000
/* Control Register for DMA transfer */
#define ESDHC_DMA_SYSCTL 0x40c
#define ESDHC_PERIPHERAL_CLK_SEL 0x00080000
#define ESDHC_FLUSH_ASYNC_FIFO 0x00040000
#define ESDHC_DMA_SNOOP 0x00000040
#endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */