mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-05 10:29:37 +00:00
![Greg Ungerer](/assets/img/avatar_default.png)
Some platform based configuration setup of spi-imx SPI devices does not set the "chip_select" to the actual hardware chip select used. This works because the cs_gpio mapping that is associated with this platform setup maps the chip_select offset used to the appropriate hardware chip select. The spi-imx driver uses the chip_select as an index into the cs_gpio array and ultimately gets the correct hardware chip select for its hardware setup. The motivation is to be able to eventually modify the spi-imx code to use the "chip_select" directly for harwdare setup instead of indirectly via the cs_gpio mapping array. This change only affects platforms using the hardware chip select addressing method for their SPI devices (sometimes called native chip select). The majority of devices using the spi-imx driver use the GPIO addressing method. The change to use the correct "chip_select" is strait forward. But the cs_gpio mapping arrary also needs to be modifed to match that change. In simple terms the cs_gpio mapping should always have the hardware chip select number at its same index offset. There is no functional change with these patches. The three affected platforms should work exactly as before. However I don't have any of these platforms (or access to them) and so I can't test them. So this patch is compile tested only. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
633 lines
16 KiB
C
633 lines
16 KiB
C
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/mc13783.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/l4f00242t03.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/ulpi.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include "3ds_debugboard.h"
|
|
#include "common.h"
|
|
#include "devices-imx31.h"
|
|
#include "ehci.h"
|
|
#include "hardware.h"
|
|
#include "iomux-mx3.h"
|
|
#include "ulpi.h"
|
|
|
|
static int mx31_3ds_pins[] = {
|
|
/* UART1 */
|
|
MX31_PIN_CTS1__CTS1,
|
|
MX31_PIN_RTS1__RTS1,
|
|
MX31_PIN_TXD1__TXD1,
|
|
MX31_PIN_RXD1__RXD1,
|
|
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
|
|
/*SPI0*/
|
|
IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
|
|
/* SPI 1 */
|
|
MX31_PIN_CSPI2_SCLK__SCLK,
|
|
MX31_PIN_CSPI2_MOSI__MOSI,
|
|
MX31_PIN_CSPI2_MISO__MISO,
|
|
MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
|
|
MX31_PIN_CSPI2_SS0__SS0,
|
|
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
|
|
/* MC13783 IRQ */
|
|
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
|
|
/* USB OTG reset */
|
|
IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
|
|
/* USB OTG */
|
|
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
|
|
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
|
|
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
|
|
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
|
|
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
|
|
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
|
|
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
|
|
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
|
|
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
|
|
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
|
|
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
|
|
MX31_PIN_USBOTG_STP__USBOTG_STP,
|
|
/*Keyboard*/
|
|
MX31_PIN_KEY_ROW0_KEY_ROW0,
|
|
MX31_PIN_KEY_ROW1_KEY_ROW1,
|
|
MX31_PIN_KEY_ROW2_KEY_ROW2,
|
|
MX31_PIN_KEY_COL0_KEY_COL0,
|
|
MX31_PIN_KEY_COL1_KEY_COL1,
|
|
MX31_PIN_KEY_COL2_KEY_COL2,
|
|
MX31_PIN_KEY_COL3_KEY_COL3,
|
|
/* USB Host 2 */
|
|
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
|
|
IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
|
|
IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
|
|
/* USB Host2 reset */
|
|
IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
|
|
/* I2C1 */
|
|
MX31_PIN_I2C_CLK__I2C1_SCL,
|
|
MX31_PIN_I2C_DAT__I2C1_SDA,
|
|
/* SDHC1 */
|
|
MX31_PIN_SD1_DATA3__SD1_DATA3,
|
|
MX31_PIN_SD1_DATA2__SD1_DATA2,
|
|
MX31_PIN_SD1_DATA1__SD1_DATA1,
|
|
MX31_PIN_SD1_DATA0__SD1_DATA0,
|
|
MX31_PIN_SD1_CLK__SD1_CLK,
|
|
MX31_PIN_SD1_CMD__SD1_CMD,
|
|
MX31_PIN_GPIO3_1__GPIO3_1, /* Card detect */
|
|
MX31_PIN_GPIO3_0__GPIO3_0, /* OE */
|
|
/* Framebuffer */
|
|
MX31_PIN_LD0__LD0,
|
|
MX31_PIN_LD1__LD1,
|
|
MX31_PIN_LD2__LD2,
|
|
MX31_PIN_LD3__LD3,
|
|
MX31_PIN_LD4__LD4,
|
|
MX31_PIN_LD5__LD5,
|
|
MX31_PIN_LD6__LD6,
|
|
MX31_PIN_LD7__LD7,
|
|
MX31_PIN_LD8__LD8,
|
|
MX31_PIN_LD9__LD9,
|
|
MX31_PIN_LD10__LD10,
|
|
MX31_PIN_LD11__LD11,
|
|
MX31_PIN_LD12__LD12,
|
|
MX31_PIN_LD13__LD13,
|
|
MX31_PIN_LD14__LD14,
|
|
MX31_PIN_LD15__LD15,
|
|
MX31_PIN_LD16__LD16,
|
|
MX31_PIN_LD17__LD17,
|
|
MX31_PIN_VSYNC3__VSYNC3,
|
|
MX31_PIN_HSYNC__HSYNC,
|
|
MX31_PIN_FPSHIFT__FPSHIFT,
|
|
MX31_PIN_CONTRAST__CONTRAST,
|
|
/* SSI */
|
|
MX31_PIN_STXD4__STXD4,
|
|
MX31_PIN_SRXD4__SRXD4,
|
|
MX31_PIN_SCK4__SCK4,
|
|
MX31_PIN_SFS4__SFS4,
|
|
};
|
|
|
|
/*
|
|
* FB support
|
|
*/
|
|
static const struct fb_videomode fb_modedb[] = {
|
|
{ /* 480x640 @ 60 Hz */
|
|
.name = "Epson-VGA",
|
|
.refresh = 60,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.pixclock = 41701,
|
|
.left_margin = 20,
|
|
.right_margin = 41,
|
|
.upper_margin = 10,
|
|
.lower_margin = 5,
|
|
.hsync_len = 20,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
.flag = 0,
|
|
},
|
|
};
|
|
|
|
static struct mx3fb_platform_data mx3fb_pdata __initdata = {
|
|
.name = "Epson-VGA",
|
|
.mode = fb_modedb,
|
|
.num_modes = ARRAY_SIZE(fb_modedb),
|
|
};
|
|
|
|
/* LCD */
|
|
static struct l4f00242t03_pdata mx31_3ds_l4f00242t03_pdata = {
|
|
.reset_gpio = IOMUX_TO_GPIO(MX31_PIN_LCS1),
|
|
.data_enable_gpio = IOMUX_TO_GPIO(MX31_PIN_SER_RS),
|
|
};
|
|
|
|
/*
|
|
* Support for SD card slot in personality board
|
|
*/
|
|
#define MX31_3DS_GPIO_SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
|
|
#define MX31_3DS_GPIO_SDHC1_BE IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
|
|
|
|
static struct gpio mx31_3ds_sdhc1_gpios[] = {
|
|
{ MX31_3DS_GPIO_SDHC1_CD, GPIOF_IN, "sdhc1-card-detect" },
|
|
{ MX31_3DS_GPIO_SDHC1_BE, GPIOF_OUT_INIT_LOW, "sdhc1-bus-en" },
|
|
};
|
|
|
|
static int mx31_3ds_sdhc1_init(struct device *dev,
|
|
irq_handler_t detect_irq,
|
|
void *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = gpio_request_array(mx31_3ds_sdhc1_gpios,
|
|
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
|
|
if (ret) {
|
|
pr_warn("Unable to request the SD/MMC GPIOs.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
|
|
detect_irq,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
"sdhc1-detect", data);
|
|
if (ret) {
|
|
pr_warn("Unable to request the SD/MMC card-detect IRQ.\n");
|
|
goto gpio_free;
|
|
}
|
|
|
|
return 0;
|
|
|
|
gpio_free:
|
|
gpio_free_array(mx31_3ds_sdhc1_gpios,
|
|
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
|
|
return ret;
|
|
}
|
|
|
|
static void mx31_3ds_sdhc1_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data);
|
|
gpio_free_array(mx31_3ds_sdhc1_gpios,
|
|
ARRAY_SIZE(mx31_3ds_sdhc1_gpios));
|
|
}
|
|
|
|
static void mx31_3ds_sdhc1_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
/*
|
|
* While the voltage stuff is done by the driver, activate the
|
|
* Buffer Enable Pin only if there is a card in slot to fix the card
|
|
* voltage issue caused by bi-directional chip TXB0108 on 3Stack.
|
|
* Done here because at this stage we have for sure a debounced value
|
|
* of the presence of the card, showed by the value of vdd.
|
|
* 7 == ilog2(MMC_VDD_165_195)
|
|
*/
|
|
if (vdd > 7)
|
|
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 1);
|
|
else
|
|
gpio_set_value(MX31_3DS_GPIO_SDHC1_BE, 0);
|
|
}
|
|
|
|
static struct imxmmc_platform_data sdhc1_pdata = {
|
|
.init = mx31_3ds_sdhc1_init,
|
|
.exit = mx31_3ds_sdhc1_exit,
|
|
.setpower = mx31_3ds_sdhc1_setpower,
|
|
};
|
|
|
|
/*
|
|
* Matrix keyboard
|
|
*/
|
|
|
|
static const uint32_t mx31_3ds_keymap[] = {
|
|
KEY(0, 0, KEY_UP),
|
|
KEY(0, 1, KEY_DOWN),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(1, 1, KEY_LEFT),
|
|
KEY(1, 2, KEY_ENTER),
|
|
KEY(2, 0, KEY_F6),
|
|
KEY(2, 1, KEY_F8),
|
|
KEY(2, 2, KEY_F9),
|
|
KEY(2, 3, KEY_F10),
|
|
};
|
|
|
|
static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
|
|
.keymap = mx31_3ds_keymap,
|
|
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
|
|
};
|
|
|
|
/* Regulators */
|
|
static struct regulator_init_data pwgtx_init = {
|
|
.constraints = {
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data gpo_init = {
|
|
.constraints = {
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
}
|
|
};
|
|
|
|
static struct regulator_consumer_supply vmmc2_consumers[] = {
|
|
REGULATOR_SUPPLY("vmmc", "imx31-mmc.0"),
|
|
};
|
|
|
|
static struct regulator_init_data vmmc2_init = {
|
|
.constraints = {
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vmmc2_consumers),
|
|
.consumer_supplies = vmmc2_consumers,
|
|
};
|
|
|
|
static struct regulator_consumer_supply vmmc1_consumers[] = {
|
|
REGULATOR_SUPPLY("vcore", "spi0.0"),
|
|
};
|
|
|
|
static struct regulator_init_data vmmc1_init = {
|
|
.constraints = {
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
|
|
.consumer_supplies = vmmc1_consumers,
|
|
};
|
|
|
|
static struct regulator_consumer_supply vgen_consumers[] = {
|
|
REGULATOR_SUPPLY("vdd", "spi0.0"),
|
|
};
|
|
|
|
static struct regulator_init_data vgen_init = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
|
|
.consumer_supplies = vgen_consumers,
|
|
};
|
|
|
|
static struct mc13xxx_regulator_init_data mx31_3ds_regulators[] = {
|
|
{
|
|
.id = MC13783_REG_PWGT1SPI, /* Power Gate for ARM core. */
|
|
.init_data = &pwgtx_init,
|
|
}, {
|
|
.id = MC13783_REG_PWGT2SPI, /* Power Gate for L2 Cache. */
|
|
.init_data = &pwgtx_init,
|
|
}, {
|
|
|
|
.id = MC13783_REG_GPO1, /* Turn on 1.8V */
|
|
.init_data = &gpo_init,
|
|
}, {
|
|
.id = MC13783_REG_GPO3, /* Turn on 3.3V */
|
|
.init_data = &gpo_init,
|
|
}, {
|
|
.id = MC13783_REG_VMMC2, /* Power MMC/SD, WiFi/Bluetooth. */
|
|
.init_data = &vmmc2_init,
|
|
}, {
|
|
.id = MC13783_REG_VMMC1, /* Power LCD, CMOS, FM, GPS, Accel. */
|
|
.init_data = &vmmc1_init,
|
|
}, {
|
|
.id = MC13783_REG_VGEN, /* Power LCD */
|
|
.init_data = &vgen_init,
|
|
},
|
|
};
|
|
|
|
/* MC13783 */
|
|
static struct mc13xxx_codec_platform_data mx31_3ds_codec = {
|
|
.dac_ssi_port = MC13783_SSI1_PORT,
|
|
.adc_ssi_port = MC13783_SSI1_PORT,
|
|
};
|
|
|
|
static struct mc13xxx_platform_data mc13783_pdata = {
|
|
.regulators = {
|
|
.regulators = mx31_3ds_regulators,
|
|
.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
|
|
},
|
|
.codec = &mx31_3ds_codec,
|
|
.flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | MC13XXX_USE_CODEC,
|
|
|
|
};
|
|
|
|
static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
|
|
.flags = IMX_SSI_DMA | IMX_SSI_NET,
|
|
};
|
|
|
|
/* SPI */
|
|
static int spi0_internal_chipselect[] = {
|
|
MXC_SPI_CS(0),
|
|
MXC_SPI_CS(1),
|
|
MXC_SPI_CS(2),
|
|
};
|
|
|
|
static const struct spi_imx_master spi0_pdata __initconst = {
|
|
.chipselect = spi0_internal_chipselect,
|
|
.num_chipselect = ARRAY_SIZE(spi0_internal_chipselect),
|
|
};
|
|
|
|
static int spi1_internal_chipselect[] = {
|
|
MXC_SPI_CS(0),
|
|
MXC_SPI_CS(1),
|
|
MXC_SPI_CS(2),
|
|
};
|
|
|
|
static const struct spi_imx_master spi1_pdata __initconst = {
|
|
.chipselect = spi1_internal_chipselect,
|
|
.num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
|
|
};
|
|
|
|
static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
|
|
{
|
|
.modalias = "mc13783",
|
|
.max_speed_hz = 1000000,
|
|
.bus_num = 1,
|
|
.chip_select = 2, /* SS2 */
|
|
.platform_data = &mc13783_pdata,
|
|
/* irq number is run-time assigned */
|
|
.mode = SPI_CS_HIGH,
|
|
}, {
|
|
.modalias = "l4f00242t03",
|
|
.max_speed_hz = 5000000,
|
|
.bus_num = 0,
|
|
.chip_select = 2, /* SS2 */
|
|
.platform_data = &mx31_3ds_l4f00242t03_pdata,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* NAND Flash
|
|
*/
|
|
static const struct mxc_nand_platform_data
|
|
mx31_3ds_nand_board_info __initconst = {
|
|
.width = 1,
|
|
.hw_ecc = 1,
|
|
#ifdef CONFIG_MACH_MX31_3DS_MXC_NAND_USE_BBT
|
|
.flash_bbt = 1,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* USB OTG
|
|
*/
|
|
|
|
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
|
|
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
|
|
|
|
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
|
|
#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
|
|
|
|
static int mx31_3ds_usbotg_init(void)
|
|
{
|
|
int err;
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
|
|
|
|
err = gpio_request(USBOTG_RST_B, "otgusb-reset");
|
|
if (err) {
|
|
pr_err("Failed to request the USB OTG reset gpio\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpio_direction_output(USBOTG_RST_B, 0);
|
|
if (err) {
|
|
pr_err("Failed to drive the USB OTG reset gpio\n");
|
|
goto usbotg_free_reset;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(USBOTG_RST_B, 1);
|
|
return 0;
|
|
|
|
usbotg_free_reset:
|
|
gpio_free(USBOTG_RST_B);
|
|
return err;
|
|
}
|
|
|
|
static int mx31_3ds_otg_init(struct platform_device *pdev)
|
|
{
|
|
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
|
|
}
|
|
|
|
static int mx31_3ds_host2_init(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
|
|
mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
|
|
|
|
err = gpio_request(USBH2_RST_B, "usbh2-reset");
|
|
if (err) {
|
|
pr_err("Failed to request the USB Host 2 reset gpio\n");
|
|
return err;
|
|
}
|
|
|
|
err = gpio_direction_output(USBH2_RST_B, 0);
|
|
if (err) {
|
|
pr_err("Failed to drive the USB Host 2 reset gpio\n");
|
|
goto usbotg_free_reset;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(USBH2_RST_B, 1);
|
|
|
|
mdelay(10);
|
|
|
|
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
|
|
|
|
usbotg_free_reset:
|
|
gpio_free(USBH2_RST_B);
|
|
return err;
|
|
}
|
|
|
|
static struct mxc_usbh_platform_data otg_pdata __initdata = {
|
|
.init = mx31_3ds_otg_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
|
|
.init = mx31_3ds_host2_init,
|
|
.portsc = MXC_EHCI_MODE_ULPI,
|
|
};
|
|
|
|
static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
|
|
.operating_mode = FSL_USB2_DR_DEVICE,
|
|
.phy_mode = FSL_USB2_PHY_ULPI,
|
|
};
|
|
|
|
static bool otg_mode_host __initdata;
|
|
|
|
static int __init mx31_3ds_otg_mode(char *options)
|
|
{
|
|
if (!strcmp(options, "host"))
|
|
otg_mode_host = true;
|
|
else if (!strcmp(options, "device"))
|
|
otg_mode_host = false;
|
|
else
|
|
pr_info("otg_mode neither \"host\" nor \"device\". "
|
|
"Defaulting to device\n");
|
|
return 1;
|
|
}
|
|
__setup("otg_mode=", mx31_3ds_otg_mode);
|
|
|
|
static const struct imxuart_platform_data uart_pdata __initconst = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
static const struct imxi2c_platform_data mx31_3ds_i2c0_data __initconst = {
|
|
.bitrate = 100000,
|
|
};
|
|
|
|
static void __init mx31_3ds_init(void)
|
|
{
|
|
imx31_soc_init();
|
|
|
|
/* Configure SPI1 IOMUX */
|
|
mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
|
|
|
|
mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
|
|
"mx31_3ds");
|
|
|
|
imx31_add_imx_uart0(&uart_pdata);
|
|
imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
|
|
|
|
imx31_add_spi_imx1(&spi1_pdata);
|
|
|
|
imx31_add_imx_keypad(&mx31_3ds_keymap_data);
|
|
|
|
imx31_add_imx2_wdt();
|
|
imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
|
|
|
|
imx31_add_spi_imx0(&spi0_pdata);
|
|
imx31_add_ipu_core();
|
|
imx31_add_mx3_sdc_fb(&mx3fb_pdata);
|
|
|
|
imx31_add_imx_ssi(0, &mx31_3ds_ssi_pdata);
|
|
|
|
imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
|
|
}
|
|
|
|
static void __init mx31_3ds_late(void)
|
|
{
|
|
mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
|
|
spi_register_board_info(mx31_3ds_spi_devs,
|
|
ARRAY_SIZE(mx31_3ds_spi_devs));
|
|
|
|
mx31_3ds_usbotg_init();
|
|
if (otg_mode_host) {
|
|
otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
|
ULPI_OTG_DRVVBUS_EXT);
|
|
if (otg_pdata.otg)
|
|
imx31_add_mxc_ehci_otg(&otg_pdata);
|
|
}
|
|
usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
|
|
ULPI_OTG_DRVVBUS_EXT);
|
|
if (usbh2_pdata.otg)
|
|
imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
|
|
|
|
if (!otg_mode_host)
|
|
imx31_add_fsl_usb2_udc(&usbotg_pdata);
|
|
|
|
if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)))
|
|
printk(KERN_WARNING "Init of the debug board failed, all "
|
|
"devices on the debug board are unusable.\n");
|
|
|
|
imx31_add_mxc_mmc(0, &sdhc1_pdata);
|
|
}
|
|
|
|
static void __init mx31_3ds_timer_init(void)
|
|
{
|
|
mx31_clocks_init(26000000);
|
|
}
|
|
|
|
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
|
|
/* Maintainer: Freescale Semiconductor, Inc. */
|
|
.atag_offset = 0x100,
|
|
.map_io = mx31_map_io,
|
|
.init_early = imx31_init_early,
|
|
.init_irq = mx31_init_irq,
|
|
.init_time = mx31_3ds_timer_init,
|
|
.init_machine = mx31_3ds_init,
|
|
.init_late = mx31_3ds_late,
|
|
.restart = mxc_restart,
|
|
MACHINE_END
|