Arnd Bergmann fcc3e3c3a4 STM32 DT updates for v5.11, round 1 ... Highlights: ---------- MCU part: -Fix dmamux reg property (length) on stm32h743. -Explicitly set DCMI bus type on stm32429i eval board. MPU part: -Enable FIFO mode with half-full threshold for DCMI. -Harmonize EHCI/OHCI nodes. -Move SDMMC IP version to v2.0 to get features improvements. -Add LP-timer wakeup support. -Enable crypto/hash/crc support. -Explicitly set DCMI bus type on stm32mp157 eval board. -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards (It is connected to I2C4). -Fix dmamux reg property (length) on stm32mp151. -Optimize USB OTG FIFO sizes on stm32mp151. -Declare tamp node also as "simple-mfd". -LXA: -Document Octavo vendor-prefixes yaml file. -Document lxa,stm32mp157c-mc1 in STM32 yaml file. -DH: -Connect PHY IRQ line on DH SoM. -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2. -Document all DH compatible strings in STM32 yaml file. -Add DHCOM based PicoITX board. This board embedds ethernet port, USB, CAN LEDS and a custom board-to-board connector. -----BEGIN PGP SIGNATURE----- iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAl/Au8MdHGFsZXhhbmRy ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIXyEw//WdCcKbynDRO0GjK3 sFIAHUBLKt4vZJRD7M5jWojKgcdggl/kaY/k5Us2hr2eLRK0yEG76njIcMEHElxz rUnEOcnJ7z0qAXZkaTCbvs/5cLybHEyAfEAl+V4fGPYO0CuJrGKpqz6cliU40VJq vWcn7hFhS7wf3bFmJgUeW36mTbBJVFD4xqvdN6ZCV3VeClqCdln7VVz3QcYEU0RW 7TcJVuvsmBOUseprmzXnTLCiEEG28Y7TexoJgAlwPvcKUlA4RGT8+cvibObTyTN6 Gvprpgm90M2Lp7RvnHQJ043o6rvu0tKjzHDxr2XIZw4uiwMwn8xtKNJUFiOCMjP4 YwTGbO1FcDFDGoWoRcFwglJSpSxBxnbFwgmdMYXoIQuJv9wv1AdFQgSknxtJzxTs 0waE0WY5+YLGFRt4x/tXoP/VCg/U4xbPXc/zOGMZwjHfZXzZyuLVj/Y2uXM2WRZZ EUCfsNUQGX460M1MF2ap2d0sI3q6WI1223dIB7bO+QN03gCLoCZ6Rhqb/JJXODu6 Nm5g5byg4Ov7p4znvAIYbGkcrqecS0YjVM1Lq6gbWV/pgjiNwkjgMuVw7AYND01u J7UWvGvJevAIfitCJTG8U66jbY+BKJQsbjHA3x1zOp7F/SnQM3jFIRgKUfrB2kd9 wPdXEthFxOFTdeyAy994NO8XTJc= =O+Lk -----END PGP SIGNATURE----- Merge tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.11, round 1 Highlights: ---------- MCU part: -Fix dmamux reg property (length) on stm32h743. -Explicitly set DCMI bus type on stm32429i eval board. MPU part: -Enable FIFO mode with half-full threshold for DCMI. -Harmonize EHCI/OHCI nodes. -Move SDMMC IP version to v2.0 to get features improvements. -Add LP-timer wakeup support. -Enable crypto/hash/crc support. -Explicitly set DCMI bus type on stm32mp157 eval board. -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards (It is connected to I2C4). -Fix dmamux reg property (length) on stm32mp151. -Optimize USB OTG FIFO sizes on stm32mp151. -Declare tamp node also as "simple-mfd". -LXA: -Document Octavo vendor-prefixes yaml file. -Document lxa,stm32mp157c-mc1 in STM32 yaml file. -DH: -Connect PHY IRQ line on DH SoM. -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2. -Document all DH compatible strings in STM32 yaml file. -Add DHCOM based PicoITX board. This board embedds ethernet port, USB, CAN LEDS and a custom board-to-board connector. * tag 'stm32-dt-for-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles dt-bindings: arm: stm32: add extra SiP compatible for lxa,stm32mp157c-mc1 dt-bindings: vendor-prefixes: document Octavo Systems oct prefix ARM: dts: stm32: Add DHCOM based PicoITX board dt-bindings: arm: stm32: Add compatible strings for DH SoMs and boards ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon dt-bindings: arm: stm32: add simple-mfd compatible for tamp node ARM: dts: stm32: update stm32mp151 for remote proc synchronization support ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151 ARM: dts: stm32: fix dmamux reg property on stm32h743 ARM: dts: stm32: fix dmamux reg property on stm32mp151 ARM: dts: stm32: fix mdma1 clients channel priority level on stm32mp151 ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller dt-bindings: connector: add typec-power-opmode property to usb-connector ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board ARM: dts: stm32: enable CRYP by default on stm32mp15 ARM: dts: stm32: enable CRC1 by default on stm32mp15 ... Link: https://lore.kernel.org/r/873c17a5-28d5-9261-f691-1b917611c932@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>		2020-11-27 18:00:08 +01:00
..
bindings	STM32 DT updates for v5.11, round 1	2020-11-27 18:00:08 +01:00
changesets.rst
dynamic-resolution-notes.rst
index.rst	dt: Remove booting-without-of.rst	2020-10-13 13:33:16 -05:00
of_unittest.rst
overlay-notes.rst
usage-model.rst
writing-schema.rst