mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-03 17:40:04 +00:00
![Colin Ian King](/assets/img/avatar_default.png)
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 1329 bytes. Before: text data bss dec hex filename 5581 1488 64 7133 1bdd drivers/staging/fbtft/fb_hx8340bn.o 5444 1264 0 6708 1a34 drivers/staging/fbtft/fb_hx8347d.o 3581 1360 0 4941 134d drivers/staging/fbtft/fb_ili9163.o 7154 1552 0 8706 2202 drivers/staging/fbtft/fb_ili9320.o 7478 2544 0 10022 2726 drivers/staging/fbtft/fb_ili9325.o 6327 1424 0 7751 1e47 drivers/staging/fbtft/fb_s6d1121.o 6498 1776 0 8274 2052 drivers/staging/fbtft/fb_ssd1289.o After: text data bss dec hex filename 5376 1584 64 7024 1b70 drivers/staging/fbtft/fb_hx8340bn.o 5276 1328 0 6604 19cc drivers/staging/fbtft/fb_hx8347d.o 3581 1360 0 4941 134d drivers/staging/fbtft/fb_ili9163.o 6905 1616 0 8521 2149 drivers/staging/fbtft/fb_ili9320.o 7229 2608 0 9837 266d drivers/staging/fbtft/fb_ili9325.o 6030 1488 0 7518 1d5e drivers/staging/fbtft/fb_s6d1121.o 6249 1872 0 8121 1fb9 drivers/staging/fbtft/fb_ssd1289.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190906153052.31846-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
225 lines
5.9 KiB
C
225 lines
5.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* FB driver for the HX8340BN LCD Controller
|
|
*
|
|
* This display uses 9-bit SPI: Data/Command bit + 8 data bits
|
|
* For platforms that doesn't support 9-bit, the driver is capable
|
|
* of emulating this using 8-bit transfer.
|
|
* This is done by transferring eight 9-bit words in 9 bytes.
|
|
*
|
|
* Copyright (C) 2013 Noralf Tronnes
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/delay.h>
|
|
#include <video/mipi_display.h>
|
|
|
|
#include "fbtft.h"
|
|
|
|
#define DRVNAME "fb_hx8340bn"
|
|
#define WIDTH 176
|
|
#define HEIGHT 220
|
|
#define TXBUFLEN (4 * PAGE_SIZE)
|
|
#define DEFAULT_GAMMA "1 3 0E 5 0 2 09 0 6 1 7 1 0 2 2\n" \
|
|
"3 3 17 8 4 7 05 7 6 0 3 1 6 0 0 "
|
|
|
|
static bool emulate;
|
|
module_param(emulate, bool, 0000);
|
|
MODULE_PARM_DESC(emulate, "Force emulation in 9-bit mode");
|
|
|
|
static int init_display(struct fbtft_par *par)
|
|
{
|
|
par->fbtftops.reset(par);
|
|
|
|
/* BTL221722-276L startup sequence, from datasheet */
|
|
|
|
/*
|
|
* SETEXTCOM: Set extended command set (C1h)
|
|
* This command is used to set extended command set access enable.
|
|
* Enable: After command (C1h), must write: ffh,83h,40h
|
|
*/
|
|
write_reg(par, 0xC1, 0xFF, 0x83, 0x40);
|
|
|
|
/*
|
|
* Sleep out
|
|
* This command turns off sleep mode.
|
|
* In this mode the DC/DC converter is enabled, Internal oscillator
|
|
* is started, and panel scanning is started.
|
|
*/
|
|
write_reg(par, 0x11);
|
|
mdelay(150);
|
|
|
|
/* Undoc'd register? */
|
|
write_reg(par, 0xCA, 0x70, 0x00, 0xD9);
|
|
|
|
/*
|
|
* SETOSC: Set Internal Oscillator (B0h)
|
|
* This command is used to set internal oscillator related settings
|
|
* OSC_EN: Enable internal oscillator
|
|
* Internal oscillator frequency: 125% x 2.52MHz
|
|
*/
|
|
write_reg(par, 0xB0, 0x01, 0x11);
|
|
|
|
/* Drive ability setting */
|
|
write_reg(par, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06);
|
|
mdelay(20);
|
|
|
|
/*
|
|
* SETPWCTR5: Set Power Control 5(B5h)
|
|
* This command is used to set VCOM Low and VCOM High Voltage
|
|
* VCOMH 0110101 : 3.925
|
|
* VCOML 0100000 : -1.700
|
|
* 45h=69 VCOMH: "VMH" + 5d VCOML: "VMH" + 5d
|
|
*/
|
|
write_reg(par, 0xB5, 0x35, 0x20, 0x45);
|
|
|
|
/*
|
|
* SETPWCTR4: Set Power Control 4(B4h)
|
|
* VRH[4:0]: Specify the VREG1 voltage adjusting.
|
|
* VREG1 voltage is for gamma voltage setting.
|
|
* BT[2:0]: Switch the output factor of step-up circuit 2
|
|
* for VGH and VGL voltage generation.
|
|
*/
|
|
write_reg(par, 0xB4, 0x33, 0x25, 0x4C);
|
|
mdelay(10);
|
|
|
|
/*
|
|
* Interface Pixel Format (3Ah)
|
|
* This command is used to define the format of RGB picture data,
|
|
* which is to be transfer via the system and RGB interface.
|
|
* RGB interface: 16 Bit/Pixel
|
|
*/
|
|
write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
|
|
|
|
/*
|
|
* Display on (29h)
|
|
* This command is used to recover from DISPLAY OFF mode.
|
|
* Output from the Frame Memory is enabled.
|
|
*/
|
|
write_reg(par, MIPI_DCS_SET_DISPLAY_ON);
|
|
mdelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
|
{
|
|
write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, xs, 0x00, xe);
|
|
write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, ys, 0x00, ye);
|
|
write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
|
|
}
|
|
|
|
static int set_var(struct fbtft_par *par)
|
|
{
|
|
/* MADCTL - Memory data access control */
|
|
/* RGB/BGR can be set with H/W pin SRGB and MADCTL BGR bit */
|
|
#define MY BIT(7)
|
|
#define MX BIT(6)
|
|
#define MV BIT(5)
|
|
switch (par->info->var.rotate) {
|
|
case 0:
|
|
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, par->bgr << 3);
|
|
break;
|
|
case 270:
|
|
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
|
|
MX | MV | (par->bgr << 3));
|
|
break;
|
|
case 180:
|
|
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
|
|
MX | MY | (par->bgr << 3));
|
|
break;
|
|
case 90:
|
|
write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
|
|
MY | MV | (par->bgr << 3));
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Gamma Curve selection, GC (only GC0 can be customized):
|
|
* 0 = 2.2, 1 = 1.8, 2 = 2.5, 3 = 1.0
|
|
* Gamma string format:
|
|
* OP0 OP1 CP0 CP1 CP2 CP3 CP4 MP0 MP1 MP2 MP3 MP4 MP5 CGM0 CGM1
|
|
* ON0 ON1 CN0 CN1 CN2 CN3 CN4 MN0 MN1 MN2 MN3 MN4 MN5 XXXX GC
|
|
*/
|
|
#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)]
|
|
static int set_gamma(struct fbtft_par *par, u32 *curves)
|
|
{
|
|
static const unsigned long mask[] = {
|
|
0x0f, 0x0f, 0x1f, 0x0f, 0x0f, 0x0f, 0x1f, 0x07, 0x07, 0x07,
|
|
0x07, 0x07, 0x07, 0x03, 0x03, 0x0f, 0x0f, 0x1f, 0x0f, 0x0f,
|
|
0x0f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00,
|
|
};
|
|
int i, j;
|
|
|
|
/* apply mask */
|
|
for (i = 0; i < par->gamma.num_curves; i++)
|
|
for (j = 0; j < par->gamma.num_values; j++)
|
|
CURVE(i, j) &= mask[i * par->gamma.num_values + j];
|
|
|
|
/* Gamma Set (26h) */
|
|
write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 1 << CURVE(1, 14));
|
|
|
|
if (CURVE(1, 14))
|
|
return 0; /* only GC0 can be customized */
|
|
|
|
write_reg(par, 0xC2,
|
|
(CURVE(0, 8) << 4) | CURVE(0, 7),
|
|
(CURVE(0, 10) << 4) | CURVE(0, 9),
|
|
(CURVE(0, 12) << 4) | CURVE(0, 11),
|
|
CURVE(0, 2),
|
|
(CURVE(0, 4) << 4) | CURVE(0, 3),
|
|
CURVE(0, 5),
|
|
CURVE(0, 6),
|
|
(CURVE(0, 1) << 4) | CURVE(0, 0),
|
|
(CURVE(0, 14) << 2) | CURVE(0, 13));
|
|
|
|
write_reg(par, 0xC3,
|
|
(CURVE(1, 8) << 4) | CURVE(1, 7),
|
|
(CURVE(1, 10) << 4) | CURVE(1, 9),
|
|
(CURVE(1, 12) << 4) | CURVE(1, 11),
|
|
CURVE(1, 2),
|
|
(CURVE(1, 4) << 4) | CURVE(1, 3),
|
|
CURVE(1, 5),
|
|
CURVE(1, 6),
|
|
(CURVE(1, 1) << 4) | CURVE(1, 0));
|
|
|
|
mdelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#undef CURVE
|
|
|
|
static struct fbtft_display display = {
|
|
.regwidth = 8,
|
|
.width = WIDTH,
|
|
.height = HEIGHT,
|
|
.txbuflen = TXBUFLEN,
|
|
.gamma_num = 2,
|
|
.gamma_len = 15,
|
|
.gamma = DEFAULT_GAMMA,
|
|
.fbtftops = {
|
|
.init_display = init_display,
|
|
.set_addr_win = set_addr_win,
|
|
.set_var = set_var,
|
|
.set_gamma = set_gamma,
|
|
},
|
|
};
|
|
|
|
FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8340bn", &display);
|
|
|
|
MODULE_ALIAS("spi:" DRVNAME);
|
|
MODULE_ALIAS("platform:" DRVNAME);
|
|
MODULE_ALIAS("spi:hx8340bn");
|
|
MODULE_ALIAS("platform:hx8340bn");
|
|
|
|
MODULE_DESCRIPTION("FB driver for the HX8340BN LCD Controller");
|
|
MODULE_AUTHOR("Noralf Tronnes");
|
|
MODULE_LICENSE("GPL");
|