mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-25 02:09:42 +00:00
![Alexander Sverdlin](/assets/img/avatar_default.png)
Use recovery framework and implement bus recovery using "Bus Monitor" register. Tests show that shortening SDA to GND results in "completion" timeout with "BUSY" bit still set, so initiate recovery in this case. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
601 lines
16 KiB
C
601 lines
16 KiB
C
/*
|
|
* This driver implements I2C master functionality using the LSI API2C
|
|
* controller.
|
|
*
|
|
* NOTE: The controller has a limitation in that it can only do transfers of
|
|
* maximum 255 bytes at a time. If a larger transfer is attempted, error code
|
|
* (-EINVAL) is returned.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define SCL_WAIT_TIMEOUT_NS 25000000
|
|
#define I2C_XFER_TIMEOUT (msecs_to_jiffies(250))
|
|
#define I2C_STOP_TIMEOUT (msecs_to_jiffies(100))
|
|
#define FIFO_SIZE 8
|
|
|
|
#define GLOBAL_CONTROL 0x00
|
|
#define GLOBAL_MST_EN BIT(0)
|
|
#define GLOBAL_SLV_EN BIT(1)
|
|
#define GLOBAL_IBML_EN BIT(2)
|
|
#define INTERRUPT_STATUS 0x04
|
|
#define INTERRUPT_ENABLE 0x08
|
|
#define INT_SLV BIT(1)
|
|
#define INT_MST BIT(0)
|
|
#define WAIT_TIMER_CONTROL 0x0c
|
|
#define WT_EN BIT(15)
|
|
#define WT_VALUE(_x) ((_x) & 0x7fff)
|
|
#define IBML_TIMEOUT 0x10
|
|
#define IBML_LOW_MEXT 0x14
|
|
#define IBML_LOW_SEXT 0x18
|
|
#define TIMER_CLOCK_DIV 0x1c
|
|
#define I2C_BUS_MONITOR 0x20
|
|
#define BM_SDAC BIT(3)
|
|
#define BM_SCLC BIT(2)
|
|
#define BM_SDAS BIT(1)
|
|
#define BM_SCLS BIT(0)
|
|
#define SOFT_RESET 0x24
|
|
#define MST_COMMAND 0x28
|
|
#define CMD_BUSY (1<<3)
|
|
#define CMD_MANUAL (0x00 | CMD_BUSY)
|
|
#define CMD_AUTO (0x01 | CMD_BUSY)
|
|
#define MST_RX_XFER 0x2c
|
|
#define MST_TX_XFER 0x30
|
|
#define MST_ADDR_1 0x34
|
|
#define MST_ADDR_2 0x38
|
|
#define MST_DATA 0x3c
|
|
#define MST_TX_FIFO 0x40
|
|
#define MST_RX_FIFO 0x44
|
|
#define MST_INT_ENABLE 0x48
|
|
#define MST_INT_STATUS 0x4c
|
|
#define MST_STATUS_RFL (1 << 13) /* RX FIFO serivce */
|
|
#define MST_STATUS_TFL (1 << 12) /* TX FIFO service */
|
|
#define MST_STATUS_SNS (1 << 11) /* Manual mode done */
|
|
#define MST_STATUS_SS (1 << 10) /* Automatic mode done */
|
|
#define MST_STATUS_SCC (1 << 9) /* Stop complete */
|
|
#define MST_STATUS_IP (1 << 8) /* Invalid parameter */
|
|
#define MST_STATUS_TSS (1 << 7) /* Timeout */
|
|
#define MST_STATUS_AL (1 << 6) /* Arbitration lost */
|
|
#define MST_STATUS_ND (1 << 5) /* NAK on data phase */
|
|
#define MST_STATUS_NA (1 << 4) /* NAK on address phase */
|
|
#define MST_STATUS_NAK (MST_STATUS_NA | \
|
|
MST_STATUS_ND)
|
|
#define MST_STATUS_ERR (MST_STATUS_NAK | \
|
|
MST_STATUS_AL | \
|
|
MST_STATUS_IP | \
|
|
MST_STATUS_TSS)
|
|
#define MST_TX_BYTES_XFRD 0x50
|
|
#define MST_RX_BYTES_XFRD 0x54
|
|
#define SCL_HIGH_PERIOD 0x80
|
|
#define SCL_LOW_PERIOD 0x84
|
|
#define SPIKE_FLTR_LEN 0x88
|
|
#define SDA_SETUP_TIME 0x8c
|
|
#define SDA_HOLD_TIME 0x90
|
|
|
|
/**
|
|
* axxia_i2c_dev - I2C device context
|
|
* @base: pointer to register struct
|
|
* @msg: pointer to current message
|
|
* @msg_xfrd: number of bytes transferred in msg
|
|
* @msg_err: error code for completed message
|
|
* @msg_complete: xfer completion object
|
|
* @dev: device reference
|
|
* @adapter: core i2c abstraction
|
|
* @i2c_clk: clock reference for i2c input clock
|
|
* @bus_clk_rate: current i2c bus clock rate
|
|
*/
|
|
struct axxia_i2c_dev {
|
|
void __iomem *base;
|
|
struct i2c_msg *msg;
|
|
size_t msg_xfrd;
|
|
int msg_err;
|
|
struct completion msg_complete;
|
|
struct device *dev;
|
|
struct i2c_adapter adapter;
|
|
struct clk *i2c_clk;
|
|
u32 bus_clk_rate;
|
|
};
|
|
|
|
static void i2c_int_disable(struct axxia_i2c_dev *idev, u32 mask)
|
|
{
|
|
u32 int_en;
|
|
|
|
int_en = readl(idev->base + MST_INT_ENABLE);
|
|
writel(int_en & ~mask, idev->base + MST_INT_ENABLE);
|
|
}
|
|
|
|
static void i2c_int_enable(struct axxia_i2c_dev *idev, u32 mask)
|
|
{
|
|
u32 int_en;
|
|
|
|
int_en = readl(idev->base + MST_INT_ENABLE);
|
|
writel(int_en | mask, idev->base + MST_INT_ENABLE);
|
|
}
|
|
|
|
/**
|
|
* ns_to_clk - Convert time (ns) to clock cycles for the given clock frequency.
|
|
*/
|
|
static u32 ns_to_clk(u64 ns, u32 clk_mhz)
|
|
{
|
|
return div_u64(ns * clk_mhz, 1000);
|
|
}
|
|
|
|
static int axxia_i2c_init(struct axxia_i2c_dev *idev)
|
|
{
|
|
u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
|
|
u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
|
|
u32 t_setup;
|
|
u32 t_high, t_low;
|
|
u32 tmo_clk;
|
|
u32 prescale;
|
|
unsigned long timeout;
|
|
|
|
dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
|
|
idev->bus_clk_rate, clk_mhz, divisor);
|
|
|
|
/* Reset controller */
|
|
writel(0x01, idev->base + SOFT_RESET);
|
|
timeout = jiffies + msecs_to_jiffies(100);
|
|
while (readl(idev->base + SOFT_RESET) & 1) {
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_warn(idev->dev, "Soft reset failed\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Enable Master Mode */
|
|
writel(0x1, idev->base + GLOBAL_CONTROL);
|
|
|
|
if (idev->bus_clk_rate <= 100000) {
|
|
/* Standard mode SCL 50/50, tSU:DAT = 250 ns */
|
|
t_high = divisor * 1 / 2;
|
|
t_low = divisor * 1 / 2;
|
|
t_setup = ns_to_clk(250, clk_mhz);
|
|
} else {
|
|
/* Fast mode SCL 33/66, tSU:DAT = 100 ns */
|
|
t_high = divisor * 1 / 3;
|
|
t_low = divisor * 2 / 3;
|
|
t_setup = ns_to_clk(100, clk_mhz);
|
|
}
|
|
|
|
/* SCL High Time */
|
|
writel(t_high, idev->base + SCL_HIGH_PERIOD);
|
|
/* SCL Low Time */
|
|
writel(t_low, idev->base + SCL_LOW_PERIOD);
|
|
/* SDA Setup Time */
|
|
writel(t_setup, idev->base + SDA_SETUP_TIME);
|
|
/* SDA Hold Time, 300ns */
|
|
writel(ns_to_clk(300, clk_mhz), idev->base + SDA_HOLD_TIME);
|
|
/* Filter <50ns spikes */
|
|
writel(ns_to_clk(50, clk_mhz), idev->base + SPIKE_FLTR_LEN);
|
|
|
|
/* Configure Time-Out Registers */
|
|
tmo_clk = ns_to_clk(SCL_WAIT_TIMEOUT_NS, clk_mhz);
|
|
|
|
/* Find prescaler value that makes tmo_clk fit in 15-bits counter. */
|
|
for (prescale = 0; prescale < 15; ++prescale) {
|
|
if (tmo_clk <= 0x7fff)
|
|
break;
|
|
tmo_clk >>= 1;
|
|
}
|
|
if (tmo_clk > 0x7fff)
|
|
tmo_clk = 0x7fff;
|
|
|
|
/* Prescale divider (log2) */
|
|
writel(prescale, idev->base + TIMER_CLOCK_DIV);
|
|
/* Timeout in divided clocks */
|
|
writel(WT_EN | WT_VALUE(tmo_clk), idev->base + WAIT_TIMER_CONTROL);
|
|
|
|
/* Mask all master interrupt bits */
|
|
i2c_int_disable(idev, ~0);
|
|
|
|
/* Interrupt enable */
|
|
writel(0x01, idev->base + INTERRUPT_ENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_m_rd(const struct i2c_msg *msg)
|
|
{
|
|
return (msg->flags & I2C_M_RD) != 0;
|
|
}
|
|
|
|
static int i2c_m_ten(const struct i2c_msg *msg)
|
|
{
|
|
return (msg->flags & I2C_M_TEN) != 0;
|
|
}
|
|
|
|
static int i2c_m_recv_len(const struct i2c_msg *msg)
|
|
{
|
|
return (msg->flags & I2C_M_RECV_LEN) != 0;
|
|
}
|
|
|
|
/**
|
|
* axxia_i2c_empty_rx_fifo - Fetch data from RX FIFO and update SMBus block
|
|
* transfer length if this is the first byte of such a transfer.
|
|
*/
|
|
static int axxia_i2c_empty_rx_fifo(struct axxia_i2c_dev *idev)
|
|
{
|
|
struct i2c_msg *msg = idev->msg;
|
|
size_t rx_fifo_avail = readl(idev->base + MST_RX_FIFO);
|
|
int bytes_to_transfer = min(rx_fifo_avail, msg->len - idev->msg_xfrd);
|
|
|
|
while (bytes_to_transfer-- > 0) {
|
|
int c = readl(idev->base + MST_DATA);
|
|
|
|
if (idev->msg_xfrd == 0 && i2c_m_recv_len(msg)) {
|
|
/*
|
|
* Check length byte for SMBus block read
|
|
*/
|
|
if (c <= 0 || c > I2C_SMBUS_BLOCK_MAX) {
|
|
idev->msg_err = -EPROTO;
|
|
i2c_int_disable(idev, ~0);
|
|
complete(&idev->msg_complete);
|
|
break;
|
|
}
|
|
msg->len = 1 + c;
|
|
writel(msg->len, idev->base + MST_RX_XFER);
|
|
}
|
|
msg->buf[idev->msg_xfrd++] = c;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* axxia_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
|
|
* @return: Number of bytes left to transfer.
|
|
*/
|
|
static int axxia_i2c_fill_tx_fifo(struct axxia_i2c_dev *idev)
|
|
{
|
|
struct i2c_msg *msg = idev->msg;
|
|
size_t tx_fifo_avail = FIFO_SIZE - readl(idev->base + MST_TX_FIFO);
|
|
int bytes_to_transfer = min(tx_fifo_avail, msg->len - idev->msg_xfrd);
|
|
int ret = msg->len - idev->msg_xfrd - bytes_to_transfer;
|
|
|
|
while (bytes_to_transfer-- > 0)
|
|
writel(msg->buf[idev->msg_xfrd++], idev->base + MST_DATA);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t axxia_i2c_isr(int irq, void *_dev)
|
|
{
|
|
struct axxia_i2c_dev *idev = _dev;
|
|
u32 status;
|
|
|
|
if (!(readl(idev->base + INTERRUPT_STATUS) & INT_MST))
|
|
return IRQ_NONE;
|
|
|
|
/* Read interrupt status bits */
|
|
status = readl(idev->base + MST_INT_STATUS);
|
|
|
|
if (!idev->msg) {
|
|
dev_warn(idev->dev, "unexpected interrupt\n");
|
|
goto out;
|
|
}
|
|
|
|
/* RX FIFO needs service? */
|
|
if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
|
|
axxia_i2c_empty_rx_fifo(idev);
|
|
|
|
/* TX FIFO needs service? */
|
|
if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
|
|
if (axxia_i2c_fill_tx_fifo(idev) == 0)
|
|
i2c_int_disable(idev, MST_STATUS_TFL);
|
|
}
|
|
|
|
if (status & MST_STATUS_SCC) {
|
|
/* Stop completed */
|
|
i2c_int_disable(idev, ~0);
|
|
complete(&idev->msg_complete);
|
|
} else if (status & MST_STATUS_SNS) {
|
|
/* Transfer done */
|
|
i2c_int_disable(idev, ~0);
|
|
if (i2c_m_rd(idev->msg) && idev->msg_xfrd < idev->msg->len)
|
|
axxia_i2c_empty_rx_fifo(idev);
|
|
complete(&idev->msg_complete);
|
|
} else if (unlikely(status & MST_STATUS_ERR)) {
|
|
/* Transfer error */
|
|
i2c_int_disable(idev, ~0);
|
|
if (status & MST_STATUS_AL)
|
|
idev->msg_err = -EAGAIN;
|
|
else if (status & MST_STATUS_NAK)
|
|
idev->msg_err = -ENXIO;
|
|
else
|
|
idev->msg_err = -EIO;
|
|
dev_dbg(idev->dev, "error %#x, addr=%#x rx=%u/%u tx=%u/%u\n",
|
|
status,
|
|
idev->msg->addr,
|
|
readl(idev->base + MST_RX_BYTES_XFRD),
|
|
readl(idev->base + MST_RX_XFER),
|
|
readl(idev->base + MST_TX_BYTES_XFRD),
|
|
readl(idev->base + MST_TX_XFER));
|
|
complete(&idev->msg_complete);
|
|
}
|
|
|
|
out:
|
|
/* Clear interrupt */
|
|
writel(INT_MST, idev->base + INTERRUPT_STATUS);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg)
|
|
{
|
|
u32 int_mask = MST_STATUS_ERR | MST_STATUS_SNS;
|
|
u32 rx_xfer, tx_xfer;
|
|
u32 addr_1, addr_2;
|
|
unsigned long time_left;
|
|
|
|
idev->msg = msg;
|
|
idev->msg_xfrd = 0;
|
|
idev->msg_err = 0;
|
|
reinit_completion(&idev->msg_complete);
|
|
|
|
if (i2c_m_ten(msg)) {
|
|
/* 10-bit address
|
|
* addr_1: 5'b11110 | addr[9:8] | (R/nW)
|
|
* addr_2: addr[7:0]
|
|
*/
|
|
addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06);
|
|
addr_2 = msg->addr & 0xFF;
|
|
} else {
|
|
/* 7-bit address
|
|
* addr_1: addr[6:0] | (R/nW)
|
|
* addr_2: dont care
|
|
*/
|
|
addr_1 = (msg->addr << 1) & 0xFF;
|
|
addr_2 = 0;
|
|
}
|
|
|
|
if (i2c_m_rd(msg)) {
|
|
/* I2C read transfer */
|
|
rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len;
|
|
tx_xfer = 0;
|
|
addr_1 |= 1; /* Set the R/nW bit of the address */
|
|
} else {
|
|
/* I2C write transfer */
|
|
rx_xfer = 0;
|
|
tx_xfer = msg->len;
|
|
}
|
|
|
|
writel(rx_xfer, idev->base + MST_RX_XFER);
|
|
writel(tx_xfer, idev->base + MST_TX_XFER);
|
|
writel(addr_1, idev->base + MST_ADDR_1);
|
|
writel(addr_2, idev->base + MST_ADDR_2);
|
|
|
|
if (i2c_m_rd(msg))
|
|
int_mask |= MST_STATUS_RFL;
|
|
else if (axxia_i2c_fill_tx_fifo(idev) != 0)
|
|
int_mask |= MST_STATUS_TFL;
|
|
|
|
/* Start manual mode */
|
|
writel(CMD_MANUAL, idev->base + MST_COMMAND);
|
|
|
|
i2c_int_enable(idev, int_mask);
|
|
|
|
time_left = wait_for_completion_timeout(&idev->msg_complete,
|
|
I2C_XFER_TIMEOUT);
|
|
|
|
i2c_int_disable(idev, int_mask);
|
|
|
|
if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
|
|
dev_warn(idev->dev, "busy after xfer\n");
|
|
|
|
if (time_left == 0)
|
|
idev->msg_err = -ETIMEDOUT;
|
|
|
|
if (idev->msg_err == -ETIMEDOUT)
|
|
i2c_recover_bus(&idev->adapter);
|
|
|
|
if (unlikely(idev->msg_err) && idev->msg_err != -ENXIO)
|
|
axxia_i2c_init(idev);
|
|
|
|
return idev->msg_err;
|
|
}
|
|
|
|
static int axxia_i2c_stop(struct axxia_i2c_dev *idev)
|
|
{
|
|
u32 int_mask = MST_STATUS_ERR | MST_STATUS_SCC;
|
|
unsigned long time_left;
|
|
|
|
reinit_completion(&idev->msg_complete);
|
|
|
|
/* Issue stop */
|
|
writel(0xb, idev->base + MST_COMMAND);
|
|
i2c_int_enable(idev, int_mask);
|
|
time_left = wait_for_completion_timeout(&idev->msg_complete,
|
|
I2C_STOP_TIMEOUT);
|
|
i2c_int_disable(idev, int_mask);
|
|
if (time_left == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
if (readl(idev->base + MST_COMMAND) & CMD_BUSY)
|
|
dev_warn(idev->dev, "busy after stop\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
|
|
{
|
|
struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
|
|
int i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; ret == 0 && i < num; ++i)
|
|
ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
|
|
|
|
axxia_i2c_stop(idev);
|
|
|
|
return ret ? : i;
|
|
}
|
|
|
|
static int axxia_i2c_get_scl(struct i2c_adapter *adap)
|
|
{
|
|
struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
|
|
|
|
return !!(readl(idev->base + I2C_BUS_MONITOR) & BM_SCLS);
|
|
}
|
|
|
|
static void axxia_i2c_set_scl(struct i2c_adapter *adap, int val)
|
|
{
|
|
struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
|
|
u32 tmp;
|
|
|
|
/* Preserve SDA Control */
|
|
tmp = readl(idev->base + I2C_BUS_MONITOR) & BM_SDAC;
|
|
if (!val)
|
|
tmp |= BM_SCLC;
|
|
writel(tmp, idev->base + I2C_BUS_MONITOR);
|
|
}
|
|
|
|
static int axxia_i2c_get_sda(struct i2c_adapter *adap)
|
|
{
|
|
struct axxia_i2c_dev *idev = i2c_get_adapdata(adap);
|
|
|
|
return !!(readl(idev->base + I2C_BUS_MONITOR) & BM_SDAS);
|
|
}
|
|
|
|
static struct i2c_bus_recovery_info axxia_i2c_recovery_info = {
|
|
.recover_bus = i2c_generic_scl_recovery,
|
|
.get_scl = axxia_i2c_get_scl,
|
|
.set_scl = axxia_i2c_set_scl,
|
|
.get_sda = axxia_i2c_get_sda,
|
|
};
|
|
|
|
static u32 axxia_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
u32 caps = (I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
|
|
I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA);
|
|
return caps;
|
|
}
|
|
|
|
static const struct i2c_algorithm axxia_i2c_algo = {
|
|
.master_xfer = axxia_i2c_xfer,
|
|
.functionality = axxia_i2c_func,
|
|
};
|
|
|
|
static struct i2c_adapter_quirks axxia_i2c_quirks = {
|
|
.max_read_len = 255,
|
|
.max_write_len = 255,
|
|
};
|
|
|
|
static int axxia_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct axxia_i2c_dev *idev = NULL;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int irq;
|
|
int ret = 0;
|
|
|
|
idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
|
|
if (!idev)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "missing interrupt resource\n");
|
|
return irq;
|
|
}
|
|
|
|
idev->i2c_clk = devm_clk_get(&pdev->dev, "i2c");
|
|
if (IS_ERR(idev->i2c_clk)) {
|
|
dev_err(&pdev->dev, "missing clock\n");
|
|
return PTR_ERR(idev->i2c_clk);
|
|
}
|
|
|
|
idev->base = base;
|
|
idev->dev = &pdev->dev;
|
|
init_completion(&idev->msg_complete);
|
|
|
|
of_property_read_u32(np, "clock-frequency", &idev->bus_clk_rate);
|
|
if (idev->bus_clk_rate == 0)
|
|
idev->bus_clk_rate = 100000; /* default clock rate */
|
|
|
|
ret = axxia_i2c_init(idev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to initialize\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, axxia_i2c_isr, 0,
|
|
pdev->name, idev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to claim IRQ%d\n", irq);
|
|
return ret;
|
|
}
|
|
|
|
clk_prepare_enable(idev->i2c_clk);
|
|
|
|
i2c_set_adapdata(&idev->adapter, idev);
|
|
strlcpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
|
|
idev->adapter.owner = THIS_MODULE;
|
|
idev->adapter.algo = &axxia_i2c_algo;
|
|
idev->adapter.bus_recovery_info = &axxia_i2c_recovery_info;
|
|
idev->adapter.quirks = &axxia_i2c_quirks;
|
|
idev->adapter.dev.parent = &pdev->dev;
|
|
idev->adapter.dev.of_node = pdev->dev.of_node;
|
|
|
|
platform_set_drvdata(pdev, idev);
|
|
|
|
ret = i2c_add_adapter(&idev->adapter);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add adapter\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int axxia_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct axxia_i2c_dev *idev = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(idev->i2c_clk);
|
|
i2c_del_adapter(&idev->adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Match table for of_platform binding */
|
|
static const struct of_device_id axxia_i2c_of_match[] = {
|
|
{ .compatible = "lsi,api2c", },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, axxia_i2c_of_match);
|
|
|
|
static struct platform_driver axxia_i2c_driver = {
|
|
.probe = axxia_i2c_probe,
|
|
.remove = axxia_i2c_remove,
|
|
.driver = {
|
|
.name = "axxia-i2c",
|
|
.of_match_table = axxia_i2c_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(axxia_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Axxia I2C Bus driver");
|
|
MODULE_AUTHOR("Anders Berg <anders.berg@lsi.com>");
|
|
MODULE_LICENSE("GPL v2");
|