mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-25 02:09:42 +00:00
![Masahiro Yamada](/assets/img/avatar_default.png)
The owner of the adapter is missing, while this driver is tristate. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1005 lines
29 KiB
C
1005 lines
29 KiB
C
/*
|
|
* I2C bus driver for the Cadence I2C controller.
|
|
*
|
|
* Copyright (C) 2009 - 2014 Xilinx, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it
|
|
* and/or modify it under the terms of the GNU General Public
|
|
* License as published by the Free Software Foundation;
|
|
* either version 2 of the License, or (at your option) any
|
|
* later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
|
|
/* Register offsets for the I2C device. */
|
|
#define CDNS_I2C_CR_OFFSET 0x00 /* Control Register, RW */
|
|
#define CDNS_I2C_SR_OFFSET 0x04 /* Status Register, RO */
|
|
#define CDNS_I2C_ADDR_OFFSET 0x08 /* I2C Address Register, RW */
|
|
#define CDNS_I2C_DATA_OFFSET 0x0C /* I2C Data Register, RW */
|
|
#define CDNS_I2C_ISR_OFFSET 0x10 /* IRQ Status Register, RW */
|
|
#define CDNS_I2C_XFER_SIZE_OFFSET 0x14 /* Transfer Size Register, RW */
|
|
#define CDNS_I2C_TIME_OUT_OFFSET 0x1C /* Time Out Register, RW */
|
|
#define CDNS_I2C_IER_OFFSET 0x24 /* IRQ Enable Register, WO */
|
|
#define CDNS_I2C_IDR_OFFSET 0x28 /* IRQ Disable Register, WO */
|
|
|
|
/* Control Register Bit mask definitions */
|
|
#define CDNS_I2C_CR_HOLD BIT(4) /* Hold Bus bit */
|
|
#define CDNS_I2C_CR_ACK_EN BIT(3)
|
|
#define CDNS_I2C_CR_NEA BIT(2)
|
|
#define CDNS_I2C_CR_MS BIT(1)
|
|
/* Read or Write Master transfer 0 = Transmitter, 1 = Receiver */
|
|
#define CDNS_I2C_CR_RW BIT(0)
|
|
/* 1 = Auto init FIFO to zeroes */
|
|
#define CDNS_I2C_CR_CLR_FIFO BIT(6)
|
|
#define CDNS_I2C_CR_DIVA_SHIFT 14
|
|
#define CDNS_I2C_CR_DIVA_MASK (3 << CDNS_I2C_CR_DIVA_SHIFT)
|
|
#define CDNS_I2C_CR_DIVB_SHIFT 8
|
|
#define CDNS_I2C_CR_DIVB_MASK (0x3f << CDNS_I2C_CR_DIVB_SHIFT)
|
|
|
|
/* Status Register Bit mask definitions */
|
|
#define CDNS_I2C_SR_BA BIT(8)
|
|
#define CDNS_I2C_SR_RXDV BIT(5)
|
|
|
|
/*
|
|
* I2C Address Register Bit mask definitions
|
|
* Normal addressing mode uses [6:0] bits. Extended addressing mode uses [9:0]
|
|
* bits. A write access to this register always initiates a transfer if the I2C
|
|
* is in master mode.
|
|
*/
|
|
#define CDNS_I2C_ADDR_MASK 0x000003FF /* I2C Address Mask */
|
|
|
|
/*
|
|
* I2C Interrupt Registers Bit mask definitions
|
|
* All the four interrupt registers (Status/Mask/Enable/Disable) have the same
|
|
* bit definitions.
|
|
*/
|
|
#define CDNS_I2C_IXR_ARB_LOST BIT(9)
|
|
#define CDNS_I2C_IXR_RX_UNF BIT(7)
|
|
#define CDNS_I2C_IXR_TX_OVF BIT(6)
|
|
#define CDNS_I2C_IXR_RX_OVF BIT(5)
|
|
#define CDNS_I2C_IXR_SLV_RDY BIT(4)
|
|
#define CDNS_I2C_IXR_TO BIT(3)
|
|
#define CDNS_I2C_IXR_NACK BIT(2)
|
|
#define CDNS_I2C_IXR_DATA BIT(1)
|
|
#define CDNS_I2C_IXR_COMP BIT(0)
|
|
|
|
#define CDNS_I2C_IXR_ALL_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
|
|
CDNS_I2C_IXR_RX_UNF | \
|
|
CDNS_I2C_IXR_TX_OVF | \
|
|
CDNS_I2C_IXR_RX_OVF | \
|
|
CDNS_I2C_IXR_SLV_RDY | \
|
|
CDNS_I2C_IXR_TO | \
|
|
CDNS_I2C_IXR_NACK | \
|
|
CDNS_I2C_IXR_DATA | \
|
|
CDNS_I2C_IXR_COMP)
|
|
|
|
#define CDNS_I2C_IXR_ERR_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
|
|
CDNS_I2C_IXR_RX_UNF | \
|
|
CDNS_I2C_IXR_TX_OVF | \
|
|
CDNS_I2C_IXR_RX_OVF | \
|
|
CDNS_I2C_IXR_NACK)
|
|
|
|
#define CDNS_I2C_ENABLED_INTR_MASK (CDNS_I2C_IXR_ARB_LOST | \
|
|
CDNS_I2C_IXR_RX_UNF | \
|
|
CDNS_I2C_IXR_TX_OVF | \
|
|
CDNS_I2C_IXR_RX_OVF | \
|
|
CDNS_I2C_IXR_NACK | \
|
|
CDNS_I2C_IXR_DATA | \
|
|
CDNS_I2C_IXR_COMP)
|
|
|
|
#define CDNS_I2C_TIMEOUT msecs_to_jiffies(1000)
|
|
|
|
#define CDNS_I2C_FIFO_DEPTH 16
|
|
/* FIFO depth at which the DATA interrupt occurs */
|
|
#define CDNS_I2C_DATA_INTR_DEPTH (CDNS_I2C_FIFO_DEPTH - 2)
|
|
#define CDNS_I2C_MAX_TRANSFER_SIZE 255
|
|
/* Transfer size in multiples of data interrupt depth */
|
|
#define CDNS_I2C_TRANSFER_SIZE (CDNS_I2C_MAX_TRANSFER_SIZE - 3)
|
|
|
|
#define DRIVER_NAME "cdns-i2c"
|
|
|
|
#define CDNS_I2C_SPEED_MAX 400000
|
|
#define CDNS_I2C_SPEED_DEFAULT 100000
|
|
|
|
#define CDNS_I2C_DIVA_MAX 4
|
|
#define CDNS_I2C_DIVB_MAX 64
|
|
|
|
#define CDNS_I2C_TIMEOUT_MAX 0xFF
|
|
|
|
#define CDNS_I2C_BROKEN_HOLD_BIT BIT(0)
|
|
|
|
#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
|
|
#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
|
|
|
|
/**
|
|
* struct cdns_i2c - I2C device private data structure
|
|
* @membase: Base address of the I2C device
|
|
* @adap: I2C adapter instance
|
|
* @p_msg: Message pointer
|
|
* @err_status: Error status in Interrupt Status Register
|
|
* @xfer_done: Transfer complete status
|
|
* @p_send_buf: Pointer to transmit buffer
|
|
* @p_recv_buf: Pointer to receive buffer
|
|
* @suspended: Flag holding the device's PM status
|
|
* @send_count: Number of bytes still expected to send
|
|
* @recv_count: Number of bytes still expected to receive
|
|
* @curr_recv_count: Number of bytes to be received in current transfer
|
|
* @irq: IRQ number
|
|
* @input_clk: Input clock to I2C controller
|
|
* @i2c_clk: Maximum I2C clock speed
|
|
* @bus_hold_flag: Flag used in repeated start for clearing HOLD bit
|
|
* @clk: Pointer to struct clk
|
|
* @clk_rate_change_nb: Notifier block for clock rate changes
|
|
* @quirks: flag for broken hold bit usage in r1p10
|
|
*/
|
|
struct cdns_i2c {
|
|
void __iomem *membase;
|
|
struct i2c_adapter adap;
|
|
struct i2c_msg *p_msg;
|
|
int err_status;
|
|
struct completion xfer_done;
|
|
unsigned char *p_send_buf;
|
|
unsigned char *p_recv_buf;
|
|
u8 suspended;
|
|
unsigned int send_count;
|
|
unsigned int recv_count;
|
|
unsigned int curr_recv_count;
|
|
int irq;
|
|
unsigned long input_clk;
|
|
unsigned int i2c_clk;
|
|
unsigned int bus_hold_flag;
|
|
struct clk *clk;
|
|
struct notifier_block clk_rate_change_nb;
|
|
u32 quirks;
|
|
};
|
|
|
|
struct cdns_platform_data {
|
|
u32 quirks;
|
|
};
|
|
|
|
#define to_cdns_i2c(_nb) container_of(_nb, struct cdns_i2c, \
|
|
clk_rate_change_nb)
|
|
|
|
/**
|
|
* cdns_i2c_clear_bus_hold() - Clear bus hold bit
|
|
* @id: Pointer to driver data struct
|
|
*
|
|
* Helper to clear the controller's bus hold bit.
|
|
*/
|
|
static void cdns_i2c_clear_bus_hold(struct cdns_i2c *id)
|
|
{
|
|
u32 reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
if (reg & CDNS_I2C_CR_HOLD)
|
|
cdns_i2c_writereg(reg & ~CDNS_I2C_CR_HOLD, CDNS_I2C_CR_OFFSET);
|
|
}
|
|
|
|
static inline bool cdns_is_holdquirk(struct cdns_i2c *id, bool hold_wrkaround)
|
|
{
|
|
return (hold_wrkaround &&
|
|
(id->curr_recv_count == CDNS_I2C_FIFO_DEPTH + 1));
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_isr - Interrupt handler for the I2C device
|
|
* @irq: irq number for the I2C device
|
|
* @ptr: void pointer to cdns_i2c structure
|
|
*
|
|
* This function handles the data interrupt, transfer complete interrupt and
|
|
* the error interrupts of the I2C device.
|
|
*
|
|
* Return: IRQ_HANDLED always
|
|
*/
|
|
static irqreturn_t cdns_i2c_isr(int irq, void *ptr)
|
|
{
|
|
unsigned int isr_status, avail_bytes, updatetx;
|
|
unsigned int bytes_to_send;
|
|
bool hold_quirk;
|
|
struct cdns_i2c *id = ptr;
|
|
/* Signal completion only after everything is updated */
|
|
int done_flag = 0;
|
|
irqreturn_t status = IRQ_NONE;
|
|
|
|
isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
|
|
cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
|
|
|
|
/* Handling nack and arbitration lost interrupt */
|
|
if (isr_status & (CDNS_I2C_IXR_NACK | CDNS_I2C_IXR_ARB_LOST)) {
|
|
done_flag = 1;
|
|
status = IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Check if transfer size register needs to be updated again for a
|
|
* large data receive operation.
|
|
*/
|
|
updatetx = 0;
|
|
if (id->recv_count > id->curr_recv_count)
|
|
updatetx = 1;
|
|
|
|
hold_quirk = (id->quirks & CDNS_I2C_BROKEN_HOLD_BIT) && updatetx;
|
|
|
|
/* When receiving, handle data interrupt and completion interrupt */
|
|
if (id->p_recv_buf &&
|
|
((isr_status & CDNS_I2C_IXR_COMP) ||
|
|
(isr_status & CDNS_I2C_IXR_DATA))) {
|
|
/* Read data if receive data valid is set */
|
|
while (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) &
|
|
CDNS_I2C_SR_RXDV) {
|
|
/*
|
|
* Clear hold bit that was set for FIFO control if
|
|
* RX data left is less than FIFO depth, unless
|
|
* repeated start is selected.
|
|
*/
|
|
if ((id->recv_count < CDNS_I2C_FIFO_DEPTH) &&
|
|
!id->bus_hold_flag)
|
|
cdns_i2c_clear_bus_hold(id);
|
|
|
|
*(id->p_recv_buf)++ =
|
|
cdns_i2c_readreg(CDNS_I2C_DATA_OFFSET);
|
|
id->recv_count--;
|
|
id->curr_recv_count--;
|
|
|
|
if (cdns_is_holdquirk(id, hold_quirk))
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* The controller sends NACK to the slave when transfer size
|
|
* register reaches zero without considering the HOLD bit.
|
|
* This workaround is implemented for large data transfers to
|
|
* maintain transfer size non-zero while performing a large
|
|
* receive operation.
|
|
*/
|
|
if (cdns_is_holdquirk(id, hold_quirk)) {
|
|
/* wait while fifo is full */
|
|
while (cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET) !=
|
|
(id->curr_recv_count - CDNS_I2C_FIFO_DEPTH))
|
|
;
|
|
|
|
/*
|
|
* Check number of bytes to be received against maximum
|
|
* transfer size and update register accordingly.
|
|
*/
|
|
if (((int)(id->recv_count) - CDNS_I2C_FIFO_DEPTH) >
|
|
CDNS_I2C_TRANSFER_SIZE) {
|
|
cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
|
|
CDNS_I2C_XFER_SIZE_OFFSET);
|
|
id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE +
|
|
CDNS_I2C_FIFO_DEPTH;
|
|
} else {
|
|
cdns_i2c_writereg(id->recv_count -
|
|
CDNS_I2C_FIFO_DEPTH,
|
|
CDNS_I2C_XFER_SIZE_OFFSET);
|
|
id->curr_recv_count = id->recv_count;
|
|
}
|
|
} else if (id->recv_count && !hold_quirk &&
|
|
!id->curr_recv_count) {
|
|
|
|
/* Set the slave address in address register*/
|
|
cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
|
|
CDNS_I2C_ADDR_OFFSET);
|
|
|
|
if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
|
|
cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
|
|
CDNS_I2C_XFER_SIZE_OFFSET);
|
|
id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
|
|
} else {
|
|
cdns_i2c_writereg(id->recv_count,
|
|
CDNS_I2C_XFER_SIZE_OFFSET);
|
|
id->curr_recv_count = id->recv_count;
|
|
}
|
|
}
|
|
|
|
/* Clear hold (if not repeated start) and signal completion */
|
|
if ((isr_status & CDNS_I2C_IXR_COMP) && !id->recv_count) {
|
|
if (!id->bus_hold_flag)
|
|
cdns_i2c_clear_bus_hold(id);
|
|
done_flag = 1;
|
|
}
|
|
|
|
status = IRQ_HANDLED;
|
|
}
|
|
|
|
/* When sending, handle transfer complete interrupt */
|
|
if ((isr_status & CDNS_I2C_IXR_COMP) && !id->p_recv_buf) {
|
|
/*
|
|
* If there is more data to be sent, calculate the
|
|
* space available in FIFO and fill with that many bytes.
|
|
*/
|
|
if (id->send_count) {
|
|
avail_bytes = CDNS_I2C_FIFO_DEPTH -
|
|
cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
|
|
if (id->send_count > avail_bytes)
|
|
bytes_to_send = avail_bytes;
|
|
else
|
|
bytes_to_send = id->send_count;
|
|
|
|
while (bytes_to_send--) {
|
|
cdns_i2c_writereg(
|
|
(*(id->p_send_buf)++),
|
|
CDNS_I2C_DATA_OFFSET);
|
|
id->send_count--;
|
|
}
|
|
} else {
|
|
/*
|
|
* Signal the completion of transaction and
|
|
* clear the hold bus bit if there are no
|
|
* further messages to be processed.
|
|
*/
|
|
done_flag = 1;
|
|
}
|
|
if (!id->send_count && !id->bus_hold_flag)
|
|
cdns_i2c_clear_bus_hold(id);
|
|
|
|
status = IRQ_HANDLED;
|
|
}
|
|
|
|
/* Update the status for errors */
|
|
id->err_status = isr_status & CDNS_I2C_IXR_ERR_INTR_MASK;
|
|
if (id->err_status)
|
|
status = IRQ_HANDLED;
|
|
|
|
if (done_flag)
|
|
complete(&id->xfer_done);
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_mrecv - Prepare and start a master receive operation
|
|
* @id: pointer to the i2c device structure
|
|
*/
|
|
static void cdns_i2c_mrecv(struct cdns_i2c *id)
|
|
{
|
|
unsigned int ctrl_reg;
|
|
unsigned int isr_status;
|
|
|
|
id->p_recv_buf = id->p_msg->buf;
|
|
id->recv_count = id->p_msg->len;
|
|
|
|
/* Put the controller in master receive mode and clear the FIFO */
|
|
ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
ctrl_reg |= CDNS_I2C_CR_RW | CDNS_I2C_CR_CLR_FIFO;
|
|
|
|
if (id->p_msg->flags & I2C_M_RECV_LEN)
|
|
id->recv_count = I2C_SMBUS_BLOCK_MAX + 1;
|
|
|
|
id->curr_recv_count = id->recv_count;
|
|
|
|
/*
|
|
* Check for the message size against FIFO depth and set the
|
|
* 'hold bus' bit if it is greater than FIFO depth.
|
|
*/
|
|
if (id->recv_count > CDNS_I2C_FIFO_DEPTH)
|
|
ctrl_reg |= CDNS_I2C_CR_HOLD;
|
|
|
|
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
|
|
|
|
/* Clear the interrupts in interrupt status register */
|
|
isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
|
|
cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
|
|
|
|
/*
|
|
* The no. of bytes to receive is checked against the limit of
|
|
* max transfer size. Set transfer size register with no of bytes
|
|
* receive if it is less than transfer size and transfer size if
|
|
* it is more. Enable the interrupts.
|
|
*/
|
|
if (id->recv_count > CDNS_I2C_TRANSFER_SIZE) {
|
|
cdns_i2c_writereg(CDNS_I2C_TRANSFER_SIZE,
|
|
CDNS_I2C_XFER_SIZE_OFFSET);
|
|
id->curr_recv_count = CDNS_I2C_TRANSFER_SIZE;
|
|
} else {
|
|
cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
|
|
}
|
|
|
|
/* Clear the bus hold flag if bytes to receive is less than FIFO size */
|
|
if (!id->bus_hold_flag &&
|
|
((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
|
|
(id->recv_count <= CDNS_I2C_FIFO_DEPTH))
|
|
cdns_i2c_clear_bus_hold(id);
|
|
/* Set the slave address in address register - triggers operation */
|
|
cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
|
|
CDNS_I2C_ADDR_OFFSET);
|
|
cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_msend - Prepare and start a master send operation
|
|
* @id: pointer to the i2c device
|
|
*/
|
|
static void cdns_i2c_msend(struct cdns_i2c *id)
|
|
{
|
|
unsigned int avail_bytes;
|
|
unsigned int bytes_to_send;
|
|
unsigned int ctrl_reg;
|
|
unsigned int isr_status;
|
|
|
|
id->p_recv_buf = NULL;
|
|
id->p_send_buf = id->p_msg->buf;
|
|
id->send_count = id->p_msg->len;
|
|
|
|
/* Set the controller in Master transmit mode and clear the FIFO. */
|
|
ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
ctrl_reg &= ~CDNS_I2C_CR_RW;
|
|
ctrl_reg |= CDNS_I2C_CR_CLR_FIFO;
|
|
|
|
/*
|
|
* Check for the message size against FIFO depth and set the
|
|
* 'hold bus' bit if it is greater than FIFO depth.
|
|
*/
|
|
if (id->send_count > CDNS_I2C_FIFO_DEPTH)
|
|
ctrl_reg |= CDNS_I2C_CR_HOLD;
|
|
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
|
|
|
|
/* Clear the interrupts in interrupt status register. */
|
|
isr_status = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
|
|
cdns_i2c_writereg(isr_status, CDNS_I2C_ISR_OFFSET);
|
|
|
|
/*
|
|
* Calculate the space available in FIFO. Check the message length
|
|
* against the space available, and fill the FIFO accordingly.
|
|
* Enable the interrupts.
|
|
*/
|
|
avail_bytes = CDNS_I2C_FIFO_DEPTH -
|
|
cdns_i2c_readreg(CDNS_I2C_XFER_SIZE_OFFSET);
|
|
|
|
if (id->send_count > avail_bytes)
|
|
bytes_to_send = avail_bytes;
|
|
else
|
|
bytes_to_send = id->send_count;
|
|
|
|
while (bytes_to_send--) {
|
|
cdns_i2c_writereg((*(id->p_send_buf)++), CDNS_I2C_DATA_OFFSET);
|
|
id->send_count--;
|
|
}
|
|
|
|
/*
|
|
* Clear the bus hold flag if there is no more data
|
|
* and if it is the last message.
|
|
*/
|
|
if (!id->bus_hold_flag && !id->send_count)
|
|
cdns_i2c_clear_bus_hold(id);
|
|
/* Set the slave address in address register - triggers operation. */
|
|
cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
|
|
CDNS_I2C_ADDR_OFFSET);
|
|
|
|
cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_master_reset - Reset the interface
|
|
* @adap: pointer to the i2c adapter driver instance
|
|
*
|
|
* This function cleanup the fifos, clear the hold bit and status
|
|
* and disable the interrupts.
|
|
*/
|
|
static void cdns_i2c_master_reset(struct i2c_adapter *adap)
|
|
{
|
|
struct cdns_i2c *id = adap->algo_data;
|
|
u32 regval;
|
|
|
|
/* Disable the interrupts */
|
|
cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK, CDNS_I2C_IDR_OFFSET);
|
|
/* Clear the hold bit and fifos */
|
|
regval = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
regval &= ~CDNS_I2C_CR_HOLD;
|
|
regval |= CDNS_I2C_CR_CLR_FIFO;
|
|
cdns_i2c_writereg(regval, CDNS_I2C_CR_OFFSET);
|
|
/* Update the transfercount register to zero */
|
|
cdns_i2c_writereg(0, CDNS_I2C_XFER_SIZE_OFFSET);
|
|
/* Clear the interupt status register */
|
|
regval = cdns_i2c_readreg(CDNS_I2C_ISR_OFFSET);
|
|
cdns_i2c_writereg(regval, CDNS_I2C_ISR_OFFSET);
|
|
/* Clear the status register */
|
|
regval = cdns_i2c_readreg(CDNS_I2C_SR_OFFSET);
|
|
cdns_i2c_writereg(regval, CDNS_I2C_SR_OFFSET);
|
|
}
|
|
|
|
static int cdns_i2c_process_msg(struct cdns_i2c *id, struct i2c_msg *msg,
|
|
struct i2c_adapter *adap)
|
|
{
|
|
unsigned long time_left;
|
|
u32 reg;
|
|
|
|
id->p_msg = msg;
|
|
id->err_status = 0;
|
|
reinit_completion(&id->xfer_done);
|
|
|
|
/* Check for the TEN Bit mode on each msg */
|
|
reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
if (msg->flags & I2C_M_TEN) {
|
|
if (reg & CDNS_I2C_CR_NEA)
|
|
cdns_i2c_writereg(reg & ~CDNS_I2C_CR_NEA,
|
|
CDNS_I2C_CR_OFFSET);
|
|
} else {
|
|
if (!(reg & CDNS_I2C_CR_NEA))
|
|
cdns_i2c_writereg(reg | CDNS_I2C_CR_NEA,
|
|
CDNS_I2C_CR_OFFSET);
|
|
}
|
|
|
|
/* Check for the R/W flag on each msg */
|
|
if (msg->flags & I2C_M_RD)
|
|
cdns_i2c_mrecv(id);
|
|
else
|
|
cdns_i2c_msend(id);
|
|
|
|
/* Wait for the signal of completion */
|
|
time_left = wait_for_completion_timeout(&id->xfer_done, adap->timeout);
|
|
if (time_left == 0) {
|
|
cdns_i2c_master_reset(adap);
|
|
dev_err(id->adap.dev.parent,
|
|
"timeout waiting on completion\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
cdns_i2c_writereg(CDNS_I2C_IXR_ALL_INTR_MASK,
|
|
CDNS_I2C_IDR_OFFSET);
|
|
|
|
/* If it is bus arbitration error, try again */
|
|
if (id->err_status & CDNS_I2C_IXR_ARB_LOST)
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_master_xfer - The main i2c transfer function
|
|
* @adap: pointer to the i2c adapter driver instance
|
|
* @msgs: pointer to the i2c message structure
|
|
* @num: the number of messages to transfer
|
|
*
|
|
* Initiates the send/recv activity based on the transfer message received.
|
|
*
|
|
* Return: number of msgs processed on success, negative error otherwise
|
|
*/
|
|
static int cdns_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
int ret, count;
|
|
u32 reg;
|
|
struct cdns_i2c *id = adap->algo_data;
|
|
bool hold_quirk;
|
|
|
|
/* Check if the bus is free */
|
|
if (cdns_i2c_readreg(CDNS_I2C_SR_OFFSET) & CDNS_I2C_SR_BA)
|
|
return -EAGAIN;
|
|
|
|
hold_quirk = !!(id->quirks & CDNS_I2C_BROKEN_HOLD_BIT);
|
|
/*
|
|
* Set the flag to one when multiple messages are to be
|
|
* processed with a repeated start.
|
|
*/
|
|
if (num > 1) {
|
|
/*
|
|
* This controller does not give completion interrupt after a
|
|
* master receive message if HOLD bit is set (repeated start),
|
|
* resulting in SW timeout. Hence, if a receive message is
|
|
* followed by any other message, an error is returned
|
|
* indicating that this sequence is not supported.
|
|
*/
|
|
for (count = 0; (count < num - 1 && hold_quirk); count++) {
|
|
if (msgs[count].flags & I2C_M_RD) {
|
|
dev_warn(adap->dev.parent,
|
|
"Can't do repeated start after a receive message\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
id->bus_hold_flag = 1;
|
|
reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
reg |= CDNS_I2C_CR_HOLD;
|
|
cdns_i2c_writereg(reg, CDNS_I2C_CR_OFFSET);
|
|
} else {
|
|
id->bus_hold_flag = 0;
|
|
}
|
|
|
|
/* Process the msg one by one */
|
|
for (count = 0; count < num; count++, msgs++) {
|
|
if (count == (num - 1))
|
|
id->bus_hold_flag = 0;
|
|
|
|
ret = cdns_i2c_process_msg(id, msgs, adap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Report the other error interrupts to application */
|
|
if (id->err_status) {
|
|
cdns_i2c_master_reset(adap);
|
|
|
|
if (id->err_status & CDNS_I2C_IXR_NACK)
|
|
return -ENXIO;
|
|
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return num;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_func - Returns the supported features of the I2C driver
|
|
* @adap: pointer to the i2c adapter structure
|
|
*
|
|
* Return: 32 bit value, each bit corresponding to a feature
|
|
*/
|
|
static u32 cdns_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
|
|
(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA;
|
|
}
|
|
|
|
static const struct i2c_algorithm cdns_i2c_algo = {
|
|
.master_xfer = cdns_i2c_master_xfer,
|
|
.functionality = cdns_i2c_func,
|
|
};
|
|
|
|
/**
|
|
* cdns_i2c_calc_divs - Calculate clock dividers
|
|
* @f: I2C clock frequency
|
|
* @input_clk: Input clock frequency
|
|
* @a: First divider (return value)
|
|
* @b: Second divider (return value)
|
|
*
|
|
* f is used as input and output variable. As input it is used as target I2C
|
|
* frequency. On function exit f holds the actually resulting I2C frequency.
|
|
*
|
|
* Return: 0 on success, negative errno otherwise.
|
|
*/
|
|
static int cdns_i2c_calc_divs(unsigned long *f, unsigned long input_clk,
|
|
unsigned int *a, unsigned int *b)
|
|
{
|
|
unsigned long fscl = *f, best_fscl = *f, actual_fscl, temp;
|
|
unsigned int div_a, div_b, calc_div_a = 0, calc_div_b = 0;
|
|
unsigned int last_error, current_error;
|
|
|
|
/* calculate (divisor_a+1) x (divisor_b+1) */
|
|
temp = input_clk / (22 * fscl);
|
|
|
|
/*
|
|
* If the calculated value is negative or 0, the fscl input is out of
|
|
* range. Return error.
|
|
*/
|
|
if (!temp || (temp > (CDNS_I2C_DIVA_MAX * CDNS_I2C_DIVB_MAX)))
|
|
return -EINVAL;
|
|
|
|
last_error = -1;
|
|
for (div_a = 0; div_a < CDNS_I2C_DIVA_MAX; div_a++) {
|
|
div_b = DIV_ROUND_UP(input_clk, 22 * fscl * (div_a + 1));
|
|
|
|
if ((div_b < 1) || (div_b > CDNS_I2C_DIVB_MAX))
|
|
continue;
|
|
div_b--;
|
|
|
|
actual_fscl = input_clk / (22 * (div_a + 1) * (div_b + 1));
|
|
|
|
if (actual_fscl > fscl)
|
|
continue;
|
|
|
|
current_error = ((actual_fscl > fscl) ? (actual_fscl - fscl) :
|
|
(fscl - actual_fscl));
|
|
|
|
if (last_error > current_error) {
|
|
calc_div_a = div_a;
|
|
calc_div_b = div_b;
|
|
best_fscl = actual_fscl;
|
|
last_error = current_error;
|
|
}
|
|
}
|
|
|
|
*a = calc_div_a;
|
|
*b = calc_div_b;
|
|
*f = best_fscl;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_setclk - This function sets the serial clock rate for the I2C device
|
|
* @clk_in: I2C clock input frequency in Hz
|
|
* @id: Pointer to the I2C device structure
|
|
*
|
|
* The device must be idle rather than busy transferring data before setting
|
|
* these device options.
|
|
* The data rate is set by values in the control register.
|
|
* The formula for determining the correct register values is
|
|
* Fscl = Fpclk/(22 x (divisor_a+1) x (divisor_b+1))
|
|
* See the hardware data sheet for a full explanation of setting the serial
|
|
* clock rate. The clock can not be faster than the input clock divide by 22.
|
|
* The two most common clock rates are 100KHz and 400KHz.
|
|
*
|
|
* Return: 0 on success, negative error otherwise
|
|
*/
|
|
static int cdns_i2c_setclk(unsigned long clk_in, struct cdns_i2c *id)
|
|
{
|
|
unsigned int div_a, div_b;
|
|
unsigned int ctrl_reg;
|
|
int ret = 0;
|
|
unsigned long fscl = id->i2c_clk;
|
|
|
|
ret = cdns_i2c_calc_divs(&fscl, clk_in, &div_a, &div_b);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl_reg = cdns_i2c_readreg(CDNS_I2C_CR_OFFSET);
|
|
ctrl_reg &= ~(CDNS_I2C_CR_DIVA_MASK | CDNS_I2C_CR_DIVB_MASK);
|
|
ctrl_reg |= ((div_a << CDNS_I2C_CR_DIVA_SHIFT) |
|
|
(div_b << CDNS_I2C_CR_DIVB_SHIFT));
|
|
cdns_i2c_writereg(ctrl_reg, CDNS_I2C_CR_OFFSET);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_clk_notifier_cb - Clock rate change callback
|
|
* @nb: Pointer to notifier block
|
|
* @event: Notification reason
|
|
* @data: Pointer to notification data object
|
|
*
|
|
* This function is called when the cdns_i2c input clock frequency changes.
|
|
* The callback checks whether a valid bus frequency can be generated after the
|
|
* change. If so, the change is acknowledged, otherwise the change is aborted.
|
|
* New dividers are written to the HW in the pre- or post change notification
|
|
* depending on the scaling direction.
|
|
*
|
|
* Return: NOTIFY_STOP if the rate change should be aborted, NOTIFY_OK
|
|
* to acknowedge the change, NOTIFY_DONE if the notification is
|
|
* considered irrelevant.
|
|
*/
|
|
static int cdns_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long
|
|
event, void *data)
|
|
{
|
|
struct clk_notifier_data *ndata = data;
|
|
struct cdns_i2c *id = to_cdns_i2c(nb);
|
|
|
|
if (id->suspended)
|
|
return NOTIFY_OK;
|
|
|
|
switch (event) {
|
|
case PRE_RATE_CHANGE:
|
|
{
|
|
unsigned long input_clk = ndata->new_rate;
|
|
unsigned long fscl = id->i2c_clk;
|
|
unsigned int div_a, div_b;
|
|
int ret;
|
|
|
|
ret = cdns_i2c_calc_divs(&fscl, input_clk, &div_a, &div_b);
|
|
if (ret) {
|
|
dev_warn(id->adap.dev.parent,
|
|
"clock rate change rejected\n");
|
|
return NOTIFY_STOP;
|
|
}
|
|
|
|
/* scale up */
|
|
if (ndata->new_rate > ndata->old_rate)
|
|
cdns_i2c_setclk(ndata->new_rate, id);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
case POST_RATE_CHANGE:
|
|
id->input_clk = ndata->new_rate;
|
|
/* scale down */
|
|
if (ndata->new_rate < ndata->old_rate)
|
|
cdns_i2c_setclk(ndata->new_rate, id);
|
|
return NOTIFY_OK;
|
|
case ABORT_RATE_CHANGE:
|
|
/* scale up */
|
|
if (ndata->new_rate > ndata->old_rate)
|
|
cdns_i2c_setclk(ndata->old_rate, id);
|
|
return NOTIFY_OK;
|
|
default:
|
|
return NOTIFY_DONE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_suspend - Suspend method for the driver
|
|
* @_dev: Address of the platform_device structure
|
|
*
|
|
* Put the driver into low power mode.
|
|
*
|
|
* Return: 0 always
|
|
*/
|
|
static int __maybe_unused cdns_i2c_suspend(struct device *_dev)
|
|
{
|
|
struct platform_device *pdev = container_of(_dev,
|
|
struct platform_device, dev);
|
|
struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
|
|
|
|
clk_disable(xi2c->clk);
|
|
xi2c->suspended = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_resume - Resume from suspend
|
|
* @_dev: Address of the platform_device structure
|
|
*
|
|
* Resume operation after suspend.
|
|
*
|
|
* Return: 0 on success and error value on error
|
|
*/
|
|
static int __maybe_unused cdns_i2c_resume(struct device *_dev)
|
|
{
|
|
struct platform_device *pdev = container_of(_dev,
|
|
struct platform_device, dev);
|
|
struct cdns_i2c *xi2c = platform_get_drvdata(pdev);
|
|
int ret;
|
|
|
|
ret = clk_enable(xi2c->clk);
|
|
if (ret) {
|
|
dev_err(_dev, "Cannot enable clock.\n");
|
|
return ret;
|
|
}
|
|
|
|
xi2c->suspended = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(cdns_i2c_dev_pm_ops, cdns_i2c_suspend,
|
|
cdns_i2c_resume);
|
|
|
|
static const struct cdns_platform_data r1p10_i2c_def = {
|
|
.quirks = CDNS_I2C_BROKEN_HOLD_BIT,
|
|
};
|
|
|
|
static const struct of_device_id cdns_i2c_of_match[] = {
|
|
{ .compatible = "cdns,i2c-r1p10", .data = &r1p10_i2c_def },
|
|
{ .compatible = "cdns,i2c-r1p14",},
|
|
{ /* end of table */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, cdns_i2c_of_match);
|
|
|
|
/**
|
|
* cdns_i2c_probe - Platform registration call
|
|
* @pdev: Handle to the platform device structure
|
|
*
|
|
* This function does all the memory allocation and registration for the i2c
|
|
* device. User can modify the address mode to 10 bit address mode using the
|
|
* ioctl call with option I2C_TENBIT.
|
|
*
|
|
* Return: 0 on success, negative error otherwise
|
|
*/
|
|
static int cdns_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *r_mem;
|
|
struct cdns_i2c *id;
|
|
int ret;
|
|
const struct of_device_id *match;
|
|
|
|
id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
|
|
if (!id)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, id);
|
|
|
|
match = of_match_node(cdns_i2c_of_match, pdev->dev.of_node);
|
|
if (match && match->data) {
|
|
const struct cdns_platform_data *data = match->data;
|
|
id->quirks = data->quirks;
|
|
}
|
|
|
|
r_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
id->membase = devm_ioremap_resource(&pdev->dev, r_mem);
|
|
if (IS_ERR(id->membase))
|
|
return PTR_ERR(id->membase);
|
|
|
|
id->irq = platform_get_irq(pdev, 0);
|
|
|
|
id->adap.owner = THIS_MODULE;
|
|
id->adap.dev.of_node = pdev->dev.of_node;
|
|
id->adap.algo = &cdns_i2c_algo;
|
|
id->adap.timeout = CDNS_I2C_TIMEOUT;
|
|
id->adap.retries = 3; /* Default retry value. */
|
|
id->adap.algo_data = id;
|
|
id->adap.dev.parent = &pdev->dev;
|
|
init_completion(&id->xfer_done);
|
|
snprintf(id->adap.name, sizeof(id->adap.name),
|
|
"Cadence I2C at %08lx", (unsigned long)r_mem->start);
|
|
|
|
id->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(id->clk)) {
|
|
dev_err(&pdev->dev, "input clock not found.\n");
|
|
return PTR_ERR(id->clk);
|
|
}
|
|
ret = clk_prepare_enable(id->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to enable clock.\n");
|
|
return ret;
|
|
}
|
|
id->clk_rate_change_nb.notifier_call = cdns_i2c_clk_notifier_cb;
|
|
if (clk_notifier_register(id->clk, &id->clk_rate_change_nb))
|
|
dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
|
|
id->input_clk = clk_get_rate(id->clk);
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
|
&id->i2c_clk);
|
|
if (ret || (id->i2c_clk > CDNS_I2C_SPEED_MAX))
|
|
id->i2c_clk = CDNS_I2C_SPEED_DEFAULT;
|
|
|
|
cdns_i2c_writereg(CDNS_I2C_CR_ACK_EN | CDNS_I2C_CR_NEA | CDNS_I2C_CR_MS,
|
|
CDNS_I2C_CR_OFFSET);
|
|
|
|
ret = cdns_i2c_setclk(id->input_clk, id);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "invalid SCL clock: %u Hz\n", id->i2c_clk);
|
|
ret = -EINVAL;
|
|
goto err_clk_dis;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, id->irq, cdns_i2c_isr, 0,
|
|
DRIVER_NAME, id);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
|
|
goto err_clk_dis;
|
|
}
|
|
|
|
ret = i2c_add_adapter(&id->adap);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "reg adap failed: %d\n", ret);
|
|
goto err_clk_dis;
|
|
}
|
|
|
|
/*
|
|
* Cadence I2C controller has a bug wherein it generates
|
|
* invalid read transaction after HW timeout in master receiver mode.
|
|
* HW timeout is not used by this driver and the interrupt is disabled.
|
|
* But the feature itself cannot be disabled. Hence maximum value
|
|
* is written to this register to reduce the chances of error.
|
|
*/
|
|
cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
|
|
|
|
dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
|
|
id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
|
|
|
|
return 0;
|
|
|
|
err_clk_dis:
|
|
clk_disable_unprepare(id->clk);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns_i2c_remove - Unregister the device after releasing the resources
|
|
* @pdev: Handle to the platform device structure
|
|
*
|
|
* This function frees all the resources allocated to the device.
|
|
*
|
|
* Return: 0 always
|
|
*/
|
|
static int cdns_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct cdns_i2c *id = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&id->adap);
|
|
clk_notifier_unregister(id->clk, &id->clk_rate_change_nb);
|
|
clk_disable_unprepare(id->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver cdns_i2c_drv = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = cdns_i2c_of_match,
|
|
.pm = &cdns_i2c_dev_pm_ops,
|
|
},
|
|
.probe = cdns_i2c_probe,
|
|
.remove = cdns_i2c_remove,
|
|
};
|
|
|
|
module_platform_driver(cdns_i2c_drv);
|
|
|
|
MODULE_AUTHOR("Xilinx Inc.");
|
|
MODULE_DESCRIPTION("Cadence I2C bus driver");
|
|
MODULE_LICENSE("GPL");
|