mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-25 02:09:42 +00:00
![Alexandra Yates](/assets/img/avatar_default.png)
Adding Intel codename Lewisburg platform device IDs for SMBus. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1481 lines
43 KiB
C
1481 lines
43 KiB
C
/*
|
|
Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>,
|
|
Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
|
|
<mdsxyz123@yahoo.com>
|
|
Copyright (C) 2007 - 2014 Jean Delvare <jdelvare@suse.de>
|
|
Copyright (C) 2010 Intel Corporation,
|
|
David Woodhouse <dwmw2@infradead.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* Supports the following Intel I/O Controller Hubs (ICH):
|
|
*
|
|
* I/O Block I2C
|
|
* region SMBus Block proc. block
|
|
* Chip name PCI ID size PEC buffer call read
|
|
* ---------------------------------------------------------------------------
|
|
* 82801AA (ICH) 0x2413 16 no no no no
|
|
* 82801AB (ICH0) 0x2423 16 no no no no
|
|
* 82801BA (ICH2) 0x2443 16 no no no no
|
|
* 82801CA (ICH3) 0x2483 32 soft no no no
|
|
* 82801DB (ICH4) 0x24c3 32 hard yes no no
|
|
* 82801E (ICH5) 0x24d3 32 hard yes yes yes
|
|
* 6300ESB 0x25a4 32 hard yes yes yes
|
|
* 82801F (ICH6) 0x266a 32 hard yes yes yes
|
|
* 6310ESB/6320ESB 0x269b 32 hard yes yes yes
|
|
* 82801G (ICH7) 0x27da 32 hard yes yes yes
|
|
* 82801H (ICH8) 0x283e 32 hard yes yes yes
|
|
* 82801I (ICH9) 0x2930 32 hard yes yes yes
|
|
* EP80579 (Tolapai) 0x5032 32 hard yes yes yes
|
|
* ICH10 0x3a30 32 hard yes yes yes
|
|
* ICH10 0x3a60 32 hard yes yes yes
|
|
* 5/3400 Series (PCH) 0x3b30 32 hard yes yes yes
|
|
* 6 Series (PCH) 0x1c22 32 hard yes yes yes
|
|
* Patsburg (PCH) 0x1d22 32 hard yes yes yes
|
|
* Patsburg (PCH) IDF 0x1d70 32 hard yes yes yes
|
|
* Patsburg (PCH) IDF 0x1d71 32 hard yes yes yes
|
|
* Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes
|
|
* DH89xxCC (PCH) 0x2330 32 hard yes yes yes
|
|
* Panther Point (PCH) 0x1e22 32 hard yes yes yes
|
|
* Lynx Point (PCH) 0x8c22 32 hard yes yes yes
|
|
* Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
|
|
* Avoton (SOC) 0x1f3c 32 hard yes yes yes
|
|
* Wellsburg (PCH) 0x8d22 32 hard yes yes yes
|
|
* Wellsburg (PCH) MS 0x8d7d 32 hard yes yes yes
|
|
* Wellsburg (PCH) MS 0x8d7e 32 hard yes yes yes
|
|
* Wellsburg (PCH) MS 0x8d7f 32 hard yes yes yes
|
|
* Coleto Creek (PCH) 0x23b0 32 hard yes yes yes
|
|
* Wildcat Point (PCH) 0x8ca2 32 hard yes yes yes
|
|
* Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes
|
|
* BayTrail (SOC) 0x0f12 32 hard yes yes yes
|
|
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
|
|
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
|
|
* DNV (SOC) 0x19df 32 hard yes yes yes
|
|
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
|
|
* Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
|
|
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
|
|
*
|
|
* Features supported by this driver:
|
|
* Software PEC no
|
|
* Hardware PEC yes
|
|
* Block buffer yes
|
|
* Block process call transaction no
|
|
* I2C block read transaction yes (doesn't use the block buffer)
|
|
* Slave mode no
|
|
* Interrupt processing yes
|
|
*
|
|
* See the file Documentation/i2c/busses/i2c-i801 for details.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/itco_wdt.h>
|
|
|
|
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
|
|
defined CONFIG_DMI
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c-mux-gpio.h>
|
|
#endif
|
|
|
|
/* I801 SMBus address offsets */
|
|
#define SMBHSTSTS(p) (0 + (p)->smba)
|
|
#define SMBHSTCNT(p) (2 + (p)->smba)
|
|
#define SMBHSTCMD(p) (3 + (p)->smba)
|
|
#define SMBHSTADD(p) (4 + (p)->smba)
|
|
#define SMBHSTDAT0(p) (5 + (p)->smba)
|
|
#define SMBHSTDAT1(p) (6 + (p)->smba)
|
|
#define SMBBLKDAT(p) (7 + (p)->smba)
|
|
#define SMBPEC(p) (8 + (p)->smba) /* ICH3 and later */
|
|
#define SMBAUXSTS(p) (12 + (p)->smba) /* ICH4 and later */
|
|
#define SMBAUXCTL(p) (13 + (p)->smba) /* ICH4 and later */
|
|
|
|
/* PCI Address Constants */
|
|
#define SMBBAR 4
|
|
#define SMBPCICTL 0x004
|
|
#define SMBPCISTS 0x006
|
|
#define SMBHSTCFG 0x040
|
|
#define TCOBASE 0x050
|
|
#define TCOCTL 0x054
|
|
|
|
#define ACPIBASE 0x040
|
|
#define ACPIBASE_SMI_OFF 0x030
|
|
#define ACPICTRL 0x044
|
|
#define ACPICTRL_EN 0x080
|
|
|
|
#define SBREG_BAR 0x10
|
|
#define SBREG_SMBCTRL 0xc6000c
|
|
|
|
/* Host status bits for SMBPCISTS */
|
|
#define SMBPCISTS_INTS 0x08
|
|
|
|
/* Control bits for SMBPCICTL */
|
|
#define SMBPCICTL_INTDIS 0x0400
|
|
|
|
/* Host configuration bits for SMBHSTCFG */
|
|
#define SMBHSTCFG_HST_EN 1
|
|
#define SMBHSTCFG_SMB_SMI_EN 2
|
|
#define SMBHSTCFG_I2C_EN 4
|
|
|
|
/* TCO configuration bits for TCOCTL */
|
|
#define TCOCTL_EN 0x0100
|
|
|
|
/* Auxiliary control register bits, ICH4+ only */
|
|
#define SMBAUXCTL_CRC 1
|
|
#define SMBAUXCTL_E32B 2
|
|
|
|
/* Other settings */
|
|
#define MAX_RETRIES 400
|
|
|
|
/* I801 command constants */
|
|
#define I801_QUICK 0x00
|
|
#define I801_BYTE 0x04
|
|
#define I801_BYTE_DATA 0x08
|
|
#define I801_WORD_DATA 0x0C
|
|
#define I801_PROC_CALL 0x10 /* unimplemented */
|
|
#define I801_BLOCK_DATA 0x14
|
|
#define I801_I2C_BLOCK_DATA 0x18 /* ICH5 and later */
|
|
|
|
/* I801 Host Control register bits */
|
|
#define SMBHSTCNT_INTREN 0x01
|
|
#define SMBHSTCNT_KILL 0x02
|
|
#define SMBHSTCNT_LAST_BYTE 0x20
|
|
#define SMBHSTCNT_START 0x40
|
|
#define SMBHSTCNT_PEC_EN 0x80 /* ICH3 and later */
|
|
|
|
/* I801 Hosts Status register bits */
|
|
#define SMBHSTSTS_BYTE_DONE 0x80
|
|
#define SMBHSTSTS_INUSE_STS 0x40
|
|
#define SMBHSTSTS_SMBALERT_STS 0x20
|
|
#define SMBHSTSTS_FAILED 0x10
|
|
#define SMBHSTSTS_BUS_ERR 0x08
|
|
#define SMBHSTSTS_DEV_ERR 0x04
|
|
#define SMBHSTSTS_INTR 0x02
|
|
#define SMBHSTSTS_HOST_BUSY 0x01
|
|
|
|
#define STATUS_ERROR_FLAGS (SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | \
|
|
SMBHSTSTS_DEV_ERR)
|
|
|
|
#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR | \
|
|
STATUS_ERROR_FLAGS)
|
|
|
|
/* Older devices have their ID defined in <linux/pci_ids.h> */
|
|
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
|
|
#define PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS 0x2292
|
|
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
|
|
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
|
|
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
|
|
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0 0x1d70
|
|
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1 0x1d71
|
|
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2 0x1d72
|
|
#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22
|
|
#define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS 0x1f3c
|
|
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
|
|
#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS 0x23b0
|
|
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
|
|
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
|
|
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS 0x8ca2
|
|
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS 0x8d22
|
|
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0 0x8d7d
|
|
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1 0x8d7e
|
|
#define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2 0x8d7f
|
|
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
|
|
#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
|
|
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
|
|
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
|
|
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
|
|
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
|
|
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
|
|
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
|
|
|
|
struct i801_mux_config {
|
|
char *gpio_chip;
|
|
unsigned values[3];
|
|
int n_values;
|
|
unsigned classes[3];
|
|
unsigned gpios[2]; /* Relative to gpio_chip->base */
|
|
int n_gpios;
|
|
};
|
|
|
|
struct i801_priv {
|
|
struct i2c_adapter adapter;
|
|
unsigned long smba;
|
|
unsigned char original_hstcfg;
|
|
struct pci_dev *pci_dev;
|
|
unsigned int features;
|
|
|
|
/* isr processing */
|
|
wait_queue_head_t waitq;
|
|
u8 status;
|
|
|
|
/* Command state used by isr for byte-by-byte block transactions */
|
|
u8 cmd;
|
|
bool is_read;
|
|
int count;
|
|
int len;
|
|
u8 *data;
|
|
|
|
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
|
|
defined CONFIG_DMI
|
|
const struct i801_mux_config *mux_drvdata;
|
|
struct platform_device *mux_pdev;
|
|
#endif
|
|
struct platform_device *tco_pdev;
|
|
};
|
|
|
|
#define FEATURE_SMBUS_PEC (1 << 0)
|
|
#define FEATURE_BLOCK_BUFFER (1 << 1)
|
|
#define FEATURE_BLOCK_PROC (1 << 2)
|
|
#define FEATURE_I2C_BLOCK_READ (1 << 3)
|
|
#define FEATURE_IRQ (1 << 4)
|
|
/* Not really a feature, but it's convenient to handle it as such */
|
|
#define FEATURE_IDF (1 << 15)
|
|
#define FEATURE_TCO (1 << 16)
|
|
|
|
static const char *i801_feature_names[] = {
|
|
"SMBus PEC",
|
|
"Block buffer",
|
|
"Block process call",
|
|
"I2C block read",
|
|
"Interrupt",
|
|
};
|
|
|
|
static unsigned int disable_features;
|
|
module_param(disable_features, uint, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(disable_features, "Disable selected driver features:\n"
|
|
"\t\t 0x01 disable SMBus PEC\n"
|
|
"\t\t 0x02 disable the block buffer\n"
|
|
"\t\t 0x08 disable the I2C block read functionality\n"
|
|
"\t\t 0x10 don't use interrupts ");
|
|
|
|
/* Make sure the SMBus host is ready to start transmitting.
|
|
Return 0 if it is, -EBUSY if it is not. */
|
|
static int i801_check_pre(struct i801_priv *priv)
|
|
{
|
|
int status;
|
|
|
|
status = inb_p(SMBHSTSTS(priv));
|
|
if (status & SMBHSTSTS_HOST_BUSY) {
|
|
dev_err(&priv->pci_dev->dev, "SMBus is busy, can't use it!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
status &= STATUS_FLAGS;
|
|
if (status) {
|
|
dev_dbg(&priv->pci_dev->dev, "Clearing status flags (%02x)\n",
|
|
status);
|
|
outb_p(status, SMBHSTSTS(priv));
|
|
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
|
|
if (status) {
|
|
dev_err(&priv->pci_dev->dev,
|
|
"Failed clearing status flags (%02x)\n",
|
|
status);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Convert the status register to an error code, and clear it.
|
|
* Note that status only contains the bits we want to clear, not the
|
|
* actual register value.
|
|
*/
|
|
static int i801_check_post(struct i801_priv *priv, int status)
|
|
{
|
|
int result = 0;
|
|
|
|
/*
|
|
* If the SMBus is still busy, we give up
|
|
* Note: This timeout condition only happens when using polling
|
|
* transactions. For interrupt operation, NAK/timeout is indicated by
|
|
* DEV_ERR.
|
|
*/
|
|
if (unlikely(status < 0)) {
|
|
dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
|
|
/* try to stop the current command */
|
|
dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
|
|
outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
|
|
SMBHSTCNT(priv));
|
|
usleep_range(1000, 2000);
|
|
outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
|
|
SMBHSTCNT(priv));
|
|
|
|
/* Check if it worked */
|
|
status = inb_p(SMBHSTSTS(priv));
|
|
if ((status & SMBHSTSTS_HOST_BUSY) ||
|
|
!(status & SMBHSTSTS_FAILED))
|
|
dev_err(&priv->pci_dev->dev,
|
|
"Failed terminating the transaction\n");
|
|
outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (status & SMBHSTSTS_FAILED) {
|
|
result = -EIO;
|
|
dev_err(&priv->pci_dev->dev, "Transaction failed\n");
|
|
}
|
|
if (status & SMBHSTSTS_DEV_ERR) {
|
|
result = -ENXIO;
|
|
dev_dbg(&priv->pci_dev->dev, "No response\n");
|
|
}
|
|
if (status & SMBHSTSTS_BUS_ERR) {
|
|
result = -EAGAIN;
|
|
dev_dbg(&priv->pci_dev->dev, "Lost arbitration\n");
|
|
}
|
|
|
|
/* Clear status flags except BYTE_DONE, to be cleared by caller */
|
|
outb_p(status, SMBHSTSTS(priv));
|
|
|
|
return result;
|
|
}
|
|
|
|
/* Wait for BUSY being cleared and either INTR or an error flag being set */
|
|
static int i801_wait_intr(struct i801_priv *priv)
|
|
{
|
|
int timeout = 0;
|
|
int status;
|
|
|
|
/* We will always wait for a fraction of a second! */
|
|
do {
|
|
usleep_range(250, 500);
|
|
status = inb_p(SMBHSTSTS(priv));
|
|
} while (((status & SMBHSTSTS_HOST_BUSY) ||
|
|
!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR))) &&
|
|
(timeout++ < MAX_RETRIES));
|
|
|
|
if (timeout > MAX_RETRIES) {
|
|
dev_dbg(&priv->pci_dev->dev, "INTR Timeout!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return status & (STATUS_ERROR_FLAGS | SMBHSTSTS_INTR);
|
|
}
|
|
|
|
/* Wait for either BYTE_DONE or an error flag being set */
|
|
static int i801_wait_byte_done(struct i801_priv *priv)
|
|
{
|
|
int timeout = 0;
|
|
int status;
|
|
|
|
/* We will always wait for a fraction of a second! */
|
|
do {
|
|
usleep_range(250, 500);
|
|
status = inb_p(SMBHSTSTS(priv));
|
|
} while (!(status & (STATUS_ERROR_FLAGS | SMBHSTSTS_BYTE_DONE)) &&
|
|
(timeout++ < MAX_RETRIES));
|
|
|
|
if (timeout > MAX_RETRIES) {
|
|
dev_dbg(&priv->pci_dev->dev, "BYTE_DONE Timeout!\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return status & STATUS_ERROR_FLAGS;
|
|
}
|
|
|
|
static int i801_transaction(struct i801_priv *priv, int xact)
|
|
{
|
|
int status;
|
|
int result;
|
|
const struct i2c_adapter *adap = &priv->adapter;
|
|
|
|
result = i801_check_pre(priv);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (priv->features & FEATURE_IRQ) {
|
|
outb_p(xact | SMBHSTCNT_INTREN | SMBHSTCNT_START,
|
|
SMBHSTCNT(priv));
|
|
result = wait_event_timeout(priv->waitq,
|
|
(status = priv->status),
|
|
adap->timeout);
|
|
if (!result) {
|
|
status = -ETIMEDOUT;
|
|
dev_warn(&priv->pci_dev->dev,
|
|
"Timeout waiting for interrupt!\n");
|
|
}
|
|
priv->status = 0;
|
|
return i801_check_post(priv, status);
|
|
}
|
|
|
|
/* the current contents of SMBHSTCNT can be overwritten, since PEC,
|
|
* SMBSCMD are passed in xact */
|
|
outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
|
|
|
|
status = i801_wait_intr(priv);
|
|
return i801_check_post(priv, status);
|
|
}
|
|
|
|
static int i801_block_transaction_by_block(struct i801_priv *priv,
|
|
union i2c_smbus_data *data,
|
|
char read_write, int hwpec)
|
|
{
|
|
int i, len;
|
|
int status;
|
|
|
|
inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
|
|
|
|
/* Use 32-byte buffer to process this transaction */
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
len = data->block[0];
|
|
outb_p(len, SMBHSTDAT0(priv));
|
|
for (i = 0; i < len; i++)
|
|
outb_p(data->block[i+1], SMBBLKDAT(priv));
|
|
}
|
|
|
|
status = i801_transaction(priv, I801_BLOCK_DATA |
|
|
(hwpec ? SMBHSTCNT_PEC_EN : 0));
|
|
if (status)
|
|
return status;
|
|
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
len = inb_p(SMBHSTDAT0(priv));
|
|
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
|
|
return -EPROTO;
|
|
|
|
data->block[0] = len;
|
|
for (i = 0; i < len; i++)
|
|
data->block[i + 1] = inb_p(SMBBLKDAT(priv));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void i801_isr_byte_done(struct i801_priv *priv)
|
|
{
|
|
if (priv->is_read) {
|
|
/* For SMBus block reads, length is received with first byte */
|
|
if (((priv->cmd & 0x1c) == I801_BLOCK_DATA) &&
|
|
(priv->count == 0)) {
|
|
priv->len = inb_p(SMBHSTDAT0(priv));
|
|
if (priv->len < 1 || priv->len > I2C_SMBUS_BLOCK_MAX) {
|
|
dev_err(&priv->pci_dev->dev,
|
|
"Illegal SMBus block read size %d\n",
|
|
priv->len);
|
|
/* FIXME: Recover */
|
|
priv->len = I2C_SMBUS_BLOCK_MAX;
|
|
} else {
|
|
dev_dbg(&priv->pci_dev->dev,
|
|
"SMBus block read size is %d\n",
|
|
priv->len);
|
|
}
|
|
priv->data[-1] = priv->len;
|
|
}
|
|
|
|
/* Read next byte */
|
|
if (priv->count < priv->len)
|
|
priv->data[priv->count++] = inb(SMBBLKDAT(priv));
|
|
else
|
|
dev_dbg(&priv->pci_dev->dev,
|
|
"Discarding extra byte on block read\n");
|
|
|
|
/* Set LAST_BYTE for last byte of read transaction */
|
|
if (priv->count == priv->len - 1)
|
|
outb_p(priv->cmd | SMBHSTCNT_LAST_BYTE,
|
|
SMBHSTCNT(priv));
|
|
} else if (priv->count < priv->len - 1) {
|
|
/* Write next byte, except for IRQ after last byte */
|
|
outb_p(priv->data[++priv->count], SMBBLKDAT(priv));
|
|
}
|
|
|
|
/* Clear BYTE_DONE to continue with next byte */
|
|
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
|
|
}
|
|
|
|
/*
|
|
* There are two kinds of interrupts:
|
|
*
|
|
* 1) i801 signals transaction completion with one of these interrupts:
|
|
* INTR - Success
|
|
* DEV_ERR - Invalid command, NAK or communication timeout
|
|
* BUS_ERR - SMI# transaction collision
|
|
* FAILED - transaction was canceled due to a KILL request
|
|
* When any of these occur, update ->status and wake up the waitq.
|
|
* ->status must be cleared before kicking off the next transaction.
|
|
*
|
|
* 2) For byte-by-byte (I2C read/write) transactions, one BYTE_DONE interrupt
|
|
* occurs for each byte of a byte-by-byte to prepare the next byte.
|
|
*/
|
|
static irqreturn_t i801_isr(int irq, void *dev_id)
|
|
{
|
|
struct i801_priv *priv = dev_id;
|
|
u16 pcists;
|
|
u8 status;
|
|
|
|
/* Confirm this is our interrupt */
|
|
pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
|
|
if (!(pcists & SMBPCISTS_INTS))
|
|
return IRQ_NONE;
|
|
|
|
status = inb_p(SMBHSTSTS(priv));
|
|
if (status & SMBHSTSTS_BYTE_DONE)
|
|
i801_isr_byte_done(priv);
|
|
|
|
/*
|
|
* Clear irq sources and report transaction result.
|
|
* ->status must be cleared before the next transaction is started.
|
|
*/
|
|
status &= SMBHSTSTS_INTR | STATUS_ERROR_FLAGS;
|
|
if (status) {
|
|
outb_p(status, SMBHSTSTS(priv));
|
|
priv->status |= status;
|
|
wake_up(&priv->waitq);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* For "byte-by-byte" block transactions:
|
|
* I2C write uses cmd=I801_BLOCK_DATA, I2C_EN=1
|
|
* I2C read uses cmd=I801_I2C_BLOCK_DATA
|
|
*/
|
|
static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
|
|
union i2c_smbus_data *data,
|
|
char read_write, int command,
|
|
int hwpec)
|
|
{
|
|
int i, len;
|
|
int smbcmd;
|
|
int status;
|
|
int result;
|
|
const struct i2c_adapter *adap = &priv->adapter;
|
|
|
|
result = i801_check_pre(priv);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
len = data->block[0];
|
|
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
outb_p(len, SMBHSTDAT0(priv));
|
|
outb_p(data->block[1], SMBBLKDAT(priv));
|
|
}
|
|
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
|
|
read_write == I2C_SMBUS_READ)
|
|
smbcmd = I801_I2C_BLOCK_DATA;
|
|
else
|
|
smbcmd = I801_BLOCK_DATA;
|
|
|
|
if (priv->features & FEATURE_IRQ) {
|
|
priv->is_read = (read_write == I2C_SMBUS_READ);
|
|
if (len == 1 && priv->is_read)
|
|
smbcmd |= SMBHSTCNT_LAST_BYTE;
|
|
priv->cmd = smbcmd | SMBHSTCNT_INTREN;
|
|
priv->len = len;
|
|
priv->count = 0;
|
|
priv->data = &data->block[1];
|
|
|
|
outb_p(priv->cmd | SMBHSTCNT_START, SMBHSTCNT(priv));
|
|
result = wait_event_timeout(priv->waitq,
|
|
(status = priv->status),
|
|
adap->timeout);
|
|
if (!result) {
|
|
status = -ETIMEDOUT;
|
|
dev_warn(&priv->pci_dev->dev,
|
|
"Timeout waiting for interrupt!\n");
|
|
}
|
|
priv->status = 0;
|
|
return i801_check_post(priv, status);
|
|
}
|
|
|
|
for (i = 1; i <= len; i++) {
|
|
if (i == len && read_write == I2C_SMBUS_READ)
|
|
smbcmd |= SMBHSTCNT_LAST_BYTE;
|
|
outb_p(smbcmd, SMBHSTCNT(priv));
|
|
|
|
if (i == 1)
|
|
outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
|
|
SMBHSTCNT(priv));
|
|
|
|
status = i801_wait_byte_done(priv);
|
|
if (status)
|
|
goto exit;
|
|
|
|
if (i == 1 && read_write == I2C_SMBUS_READ
|
|
&& command != I2C_SMBUS_I2C_BLOCK_DATA) {
|
|
len = inb_p(SMBHSTDAT0(priv));
|
|
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
|
|
dev_err(&priv->pci_dev->dev,
|
|
"Illegal SMBus block read size %d\n",
|
|
len);
|
|
/* Recover */
|
|
while (inb_p(SMBHSTSTS(priv)) &
|
|
SMBHSTSTS_HOST_BUSY)
|
|
outb_p(SMBHSTSTS_BYTE_DONE,
|
|
SMBHSTSTS(priv));
|
|
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
|
|
return -EPROTO;
|
|
}
|
|
data->block[0] = len;
|
|
}
|
|
|
|
/* Retrieve/store value in SMBBLKDAT */
|
|
if (read_write == I2C_SMBUS_READ)
|
|
data->block[i] = inb_p(SMBBLKDAT(priv));
|
|
if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
|
|
outb_p(data->block[i+1], SMBBLKDAT(priv));
|
|
|
|
/* signals SMBBLKDAT ready */
|
|
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
|
|
}
|
|
|
|
status = i801_wait_intr(priv);
|
|
exit:
|
|
return i801_check_post(priv, status);
|
|
}
|
|
|
|
static int i801_set_block_buffer_mode(struct i801_priv *priv)
|
|
{
|
|
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
|
|
if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
/* Block transaction function */
|
|
static int i801_block_transaction(struct i801_priv *priv,
|
|
union i2c_smbus_data *data, char read_write,
|
|
int command, int hwpec)
|
|
{
|
|
int result = 0;
|
|
unsigned char hostc;
|
|
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
/* set I2C_EN bit in configuration register */
|
|
pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
|
|
pci_write_config_byte(priv->pci_dev, SMBHSTCFG,
|
|
hostc | SMBHSTCFG_I2C_EN);
|
|
} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
|
|
dev_err(&priv->pci_dev->dev,
|
|
"I2C block read is unsupported!\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
if (read_write == I2C_SMBUS_WRITE
|
|
|| command == I2C_SMBUS_I2C_BLOCK_DATA) {
|
|
if (data->block[0] < 1)
|
|
data->block[0] = 1;
|
|
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
|
|
data->block[0] = I2C_SMBUS_BLOCK_MAX;
|
|
} else {
|
|
data->block[0] = 32; /* max for SMBus block reads */
|
|
}
|
|
|
|
/* Experience has shown that the block buffer can only be used for
|
|
SMBus (not I2C) block transactions, even though the datasheet
|
|
doesn't mention this limitation. */
|
|
if ((priv->features & FEATURE_BLOCK_BUFFER)
|
|
&& command != I2C_SMBUS_I2C_BLOCK_DATA
|
|
&& i801_set_block_buffer_mode(priv) == 0)
|
|
result = i801_block_transaction_by_block(priv, data,
|
|
read_write, hwpec);
|
|
else
|
|
result = i801_block_transaction_byte_by_byte(priv, data,
|
|
read_write,
|
|
command, hwpec);
|
|
|
|
if (command == I2C_SMBUS_I2C_BLOCK_DATA
|
|
&& read_write == I2C_SMBUS_WRITE) {
|
|
/* restore saved configuration register value */
|
|
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/* Return negative errno on error. */
|
|
static s32 i801_access(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write, u8 command,
|
|
int size, union i2c_smbus_data *data)
|
|
{
|
|
int hwpec;
|
|
int block = 0;
|
|
int ret, xact = 0;
|
|
struct i801_priv *priv = i2c_get_adapdata(adap);
|
|
|
|
hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
|
|
&& size != I2C_SMBUS_QUICK
|
|
&& size != I2C_SMBUS_I2C_BLOCK_DATA;
|
|
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD(priv));
|
|
xact = I801_QUICK;
|
|
break;
|
|
case I2C_SMBUS_BYTE:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD(priv));
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(command, SMBHSTCMD(priv));
|
|
xact = I801_BYTE;
|
|
break;
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD(priv));
|
|
outb_p(command, SMBHSTCMD(priv));
|
|
if (read_write == I2C_SMBUS_WRITE)
|
|
outb_p(data->byte, SMBHSTDAT0(priv));
|
|
xact = I801_BYTE_DATA;
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD(priv));
|
|
outb_p(command, SMBHSTCMD(priv));
|
|
if (read_write == I2C_SMBUS_WRITE) {
|
|
outb_p(data->word & 0xff, SMBHSTDAT0(priv));
|
|
outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
|
|
}
|
|
xact = I801_WORD_DATA;
|
|
break;
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
|
SMBHSTADD(priv));
|
|
outb_p(command, SMBHSTCMD(priv));
|
|
block = 1;
|
|
break;
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
/* NB: page 240 of ICH5 datasheet shows that the R/#W
|
|
* bit should be cleared here, even when reading */
|
|
outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
/* NB: page 240 of ICH5 datasheet also shows
|
|
* that DATA1 is the cmd field when reading */
|
|
outb_p(command, SMBHSTDAT1(priv));
|
|
} else
|
|
outb_p(command, SMBHSTCMD(priv));
|
|
block = 1;
|
|
break;
|
|
default:
|
|
dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
|
|
size);
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (hwpec) /* enable/disable hardware PEC */
|
|
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
|
|
else
|
|
outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC),
|
|
SMBAUXCTL(priv));
|
|
|
|
if (block)
|
|
ret = i801_block_transaction(priv, data, read_write, size,
|
|
hwpec);
|
|
else
|
|
ret = i801_transaction(priv, xact);
|
|
|
|
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
|
|
time, so we forcibly disable it after every transaction. Turn off
|
|
E32B for the same reason. */
|
|
if (hwpec || block)
|
|
outb_p(inb_p(SMBAUXCTL(priv)) &
|
|
~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
|
|
|
|
if (block)
|
|
return ret;
|
|
if (ret)
|
|
return ret;
|
|
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
|
|
return 0;
|
|
|
|
switch (xact & 0x7f) {
|
|
case I801_BYTE: /* Result put in SMBHSTDAT0 */
|
|
case I801_BYTE_DATA:
|
|
data->byte = inb_p(SMBHSTDAT0(priv));
|
|
break;
|
|
case I801_WORD_DATA:
|
|
data->word = inb_p(SMBHSTDAT0(priv)) +
|
|
(inb_p(SMBHSTDAT1(priv)) << 8);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static u32 i801_func(struct i2c_adapter *adapter)
|
|
{
|
|
struct i801_priv *priv = i2c_get_adapdata(adapter);
|
|
|
|
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
|
|
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
|
|
((priv->features & FEATURE_I2C_BLOCK_READ) ?
|
|
I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
|
|
}
|
|
|
|
static const struct i2c_algorithm smbus_algorithm = {
|
|
.smbus_xfer = i801_access,
|
|
.functionality = i801_func,
|
|
};
|
|
|
|
static const struct pci_device_id i801_ids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EP80579_1) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
|
|
{ 0, }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, i801_ids);
|
|
|
|
#if defined CONFIG_X86 && defined CONFIG_DMI
|
|
static unsigned char apanel_addr;
|
|
|
|
/* Scan the system ROM for the signature "FJKEYINF" */
|
|
static __init const void __iomem *bios_signature(const void __iomem *bios)
|
|
{
|
|
ssize_t offset;
|
|
const unsigned char signature[] = "FJKEYINF";
|
|
|
|
for (offset = 0; offset < 0x10000; offset += 0x10) {
|
|
if (check_signature(bios + offset, signature,
|
|
sizeof(signature)-1))
|
|
return bios + offset;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static void __init input_apanel_init(void)
|
|
{
|
|
void __iomem *bios;
|
|
const void __iomem *p;
|
|
|
|
bios = ioremap(0xF0000, 0x10000); /* Can't fail */
|
|
p = bios_signature(bios);
|
|
if (p) {
|
|
/* just use the first address */
|
|
apanel_addr = readb(p + 8 + 3) >> 1;
|
|
}
|
|
iounmap(bios);
|
|
}
|
|
|
|
struct dmi_onboard_device_info {
|
|
const char *name;
|
|
u8 type;
|
|
unsigned short i2c_addr;
|
|
const char *i2c_type;
|
|
};
|
|
|
|
static const struct dmi_onboard_device_info dmi_devices[] = {
|
|
{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
|
|
{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
|
|
{ "Hades", DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
|
|
};
|
|
|
|
static void dmi_check_onboard_device(u8 type, const char *name,
|
|
struct i2c_adapter *adap)
|
|
{
|
|
int i;
|
|
struct i2c_board_info info;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
|
|
/* & ~0x80, ignore enabled/disabled bit */
|
|
if ((type & ~0x80) != dmi_devices[i].type)
|
|
continue;
|
|
if (strcasecmp(name, dmi_devices[i].name))
|
|
continue;
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
info.addr = dmi_devices[i].i2c_addr;
|
|
strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
|
|
i2c_new_device(adap, &info);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* We use our own function to check for onboard devices instead of
|
|
dmi_find_device() as some buggy BIOS's have the devices we are interested
|
|
in marked as disabled */
|
|
static void dmi_check_onboard_devices(const struct dmi_header *dm, void *adap)
|
|
{
|
|
int i, count;
|
|
|
|
if (dm->type != 10)
|
|
return;
|
|
|
|
count = (dm->length - sizeof(struct dmi_header)) / 2;
|
|
for (i = 0; i < count; i++) {
|
|
const u8 *d = (char *)(dm + 1) + (i * 2);
|
|
const char *name = ((char *) dm) + dm->length;
|
|
u8 type = d[0];
|
|
u8 s = d[1];
|
|
|
|
if (!s)
|
|
continue;
|
|
s--;
|
|
while (s > 0 && name[0]) {
|
|
name += strlen(name) + 1;
|
|
s--;
|
|
}
|
|
if (name[0] == 0) /* Bogus string reference */
|
|
continue;
|
|
|
|
dmi_check_onboard_device(type, name, adap);
|
|
}
|
|
}
|
|
|
|
/* Register optional slaves */
|
|
static void i801_probe_optional_slaves(struct i801_priv *priv)
|
|
{
|
|
/* Only register slaves on main SMBus channel */
|
|
if (priv->features & FEATURE_IDF)
|
|
return;
|
|
|
|
if (apanel_addr) {
|
|
struct i2c_board_info info;
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
info.addr = apanel_addr;
|
|
strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
|
|
i2c_new_device(&priv->adapter, &info);
|
|
}
|
|
|
|
if (dmi_name_in_vendors("FUJITSU"))
|
|
dmi_walk(dmi_check_onboard_devices, &priv->adapter);
|
|
}
|
|
#else
|
|
static void __init input_apanel_init(void) {}
|
|
static void i801_probe_optional_slaves(struct i801_priv *priv) {}
|
|
#endif /* CONFIG_X86 && CONFIG_DMI */
|
|
|
|
#if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
|
|
defined CONFIG_DMI
|
|
static struct i801_mux_config i801_mux_config_asus_z8_d12 = {
|
|
.gpio_chip = "gpio_ich",
|
|
.values = { 0x02, 0x03 },
|
|
.n_values = 2,
|
|
.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD },
|
|
.gpios = { 52, 53 },
|
|
.n_gpios = 2,
|
|
};
|
|
|
|
static struct i801_mux_config i801_mux_config_asus_z8_d18 = {
|
|
.gpio_chip = "gpio_ich",
|
|
.values = { 0x02, 0x03, 0x01 },
|
|
.n_values = 3,
|
|
.classes = { I2C_CLASS_SPD, I2C_CLASS_SPD, I2C_CLASS_SPD },
|
|
.gpios = { 52, 53 },
|
|
.n_gpios = 2,
|
|
};
|
|
|
|
static const struct dmi_system_id mux_dmi_table[] = {
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8NA-D6(C)"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)E-D12(X)"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8NH-D12"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8PH-D12/IFB"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8NR-D12"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8P(N)H-D12"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8PG-D18"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d18,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8PE-D18"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d18,
|
|
},
|
|
{
|
|
.matches = {
|
|
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
|
|
DMI_MATCH(DMI_BOARD_NAME, "Z8PS-D12"),
|
|
},
|
|
.driver_data = &i801_mux_config_asus_z8_d12,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
/* Setup multiplexing if needed */
|
|
static int i801_add_mux(struct i801_priv *priv)
|
|
{
|
|
struct device *dev = &priv->adapter.dev;
|
|
const struct i801_mux_config *mux_config;
|
|
struct i2c_mux_gpio_platform_data gpio_data;
|
|
int err;
|
|
|
|
if (!priv->mux_drvdata)
|
|
return 0;
|
|
mux_config = priv->mux_drvdata;
|
|
|
|
/* Prepare the platform data */
|
|
memset(&gpio_data, 0, sizeof(struct i2c_mux_gpio_platform_data));
|
|
gpio_data.parent = priv->adapter.nr;
|
|
gpio_data.values = mux_config->values;
|
|
gpio_data.n_values = mux_config->n_values;
|
|
gpio_data.classes = mux_config->classes;
|
|
gpio_data.gpio_chip = mux_config->gpio_chip;
|
|
gpio_data.gpios = mux_config->gpios;
|
|
gpio_data.n_gpios = mux_config->n_gpios;
|
|
gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
|
|
|
|
/* Register the mux device */
|
|
priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
|
|
PLATFORM_DEVID_AUTO, &gpio_data,
|
|
sizeof(struct i2c_mux_gpio_platform_data));
|
|
if (IS_ERR(priv->mux_pdev)) {
|
|
err = PTR_ERR(priv->mux_pdev);
|
|
priv->mux_pdev = NULL;
|
|
dev_err(dev, "Failed to register i2c-mux-gpio device\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i801_del_mux(struct i801_priv *priv)
|
|
{
|
|
if (priv->mux_pdev)
|
|
platform_device_unregister(priv->mux_pdev);
|
|
}
|
|
|
|
static unsigned int i801_get_adapter_class(struct i801_priv *priv)
|
|
{
|
|
const struct dmi_system_id *id;
|
|
const struct i801_mux_config *mux_config;
|
|
unsigned int class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
|
|
int i;
|
|
|
|
id = dmi_first_match(mux_dmi_table);
|
|
if (id) {
|
|
/* Remove branch classes from trunk */
|
|
mux_config = id->driver_data;
|
|
for (i = 0; i < mux_config->n_values; i++)
|
|
class &= ~mux_config->classes[i];
|
|
|
|
/* Remember for later */
|
|
priv->mux_drvdata = mux_config;
|
|
}
|
|
|
|
return class;
|
|
}
|
|
#else
|
|
static inline int i801_add_mux(struct i801_priv *priv) { return 0; }
|
|
static inline void i801_del_mux(struct i801_priv *priv) { }
|
|
|
|
static inline unsigned int i801_get_adapter_class(struct i801_priv *priv)
|
|
{
|
|
return I2C_CLASS_HWMON | I2C_CLASS_SPD;
|
|
}
|
|
#endif
|
|
|
|
static const struct itco_wdt_platform_data tco_platform_data = {
|
|
.name = "Intel PCH",
|
|
.version = 4,
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(p2sb_spinlock);
|
|
|
|
static void i801_add_tco(struct i801_priv *priv)
|
|
{
|
|
struct pci_dev *pci_dev = priv->pci_dev;
|
|
struct resource tco_res[3], *res;
|
|
struct platform_device *pdev;
|
|
unsigned int devfn;
|
|
u32 tco_base, tco_ctl;
|
|
u32 base_addr, ctrl_val;
|
|
u64 base64_addr;
|
|
|
|
if (!(priv->features & FEATURE_TCO))
|
|
return;
|
|
|
|
pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
|
|
pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
|
|
if (!(tco_ctl & TCOCTL_EN))
|
|
return;
|
|
|
|
memset(tco_res, 0, sizeof(tco_res));
|
|
|
|
res = &tco_res[ICH_RES_IO_TCO];
|
|
res->start = tco_base & ~1;
|
|
res->end = res->start + 32 - 1;
|
|
res->flags = IORESOURCE_IO;
|
|
|
|
/*
|
|
* Power Management registers.
|
|
*/
|
|
devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
|
|
pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
|
|
|
|
res = &tco_res[ICH_RES_IO_SMI];
|
|
res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
|
|
res->end = res->start + 3;
|
|
res->flags = IORESOURCE_IO;
|
|
|
|
/*
|
|
* Enable the ACPI I/O space.
|
|
*/
|
|
pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
|
|
ctrl_val |= ACPICTRL_EN;
|
|
pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
|
|
|
|
/*
|
|
* We must access the NO_REBOOT bit over the Primary to Sideband
|
|
* bridge (P2SB). The BIOS prevents the P2SB device from being
|
|
* enumerated by the PCI subsystem, so we need to unhide/hide it
|
|
* to lookup the P2SB BAR.
|
|
*/
|
|
spin_lock(&p2sb_spinlock);
|
|
|
|
devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);
|
|
|
|
/* Unhide the P2SB device */
|
|
pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
|
|
|
|
pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
|
|
base64_addr = base_addr & 0xfffffff0;
|
|
|
|
pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
|
|
base64_addr |= (u64)base_addr << 32;
|
|
|
|
/* Hide the P2SB device */
|
|
pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x1);
|
|
spin_unlock(&p2sb_spinlock);
|
|
|
|
res = &tco_res[ICH_RES_MEM_OFF];
|
|
res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
|
|
res->end = res->start + 3;
|
|
res->flags = IORESOURCE_MEM;
|
|
|
|
pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
|
|
tco_res, 3, &tco_platform_data,
|
|
sizeof(tco_platform_data));
|
|
if (IS_ERR(pdev)) {
|
|
dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
|
|
return;
|
|
}
|
|
|
|
priv->tco_pdev = pdev;
|
|
}
|
|
|
|
static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
unsigned char temp;
|
|
int err, i;
|
|
struct i801_priv *priv;
|
|
|
|
priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_adapdata(&priv->adapter, priv);
|
|
priv->adapter.owner = THIS_MODULE;
|
|
priv->adapter.class = i801_get_adapter_class(priv);
|
|
priv->adapter.algo = &smbus_algorithm;
|
|
priv->adapter.dev.parent = &dev->dev;
|
|
ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
|
|
priv->adapter.retries = 3;
|
|
|
|
priv->pci_dev = dev;
|
|
switch (dev->device) {
|
|
case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
|
|
case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
|
|
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
|
|
priv->features |= FEATURE_I2C_BLOCK_READ;
|
|
priv->features |= FEATURE_IRQ;
|
|
priv->features |= FEATURE_SMBUS_PEC;
|
|
priv->features |= FEATURE_BLOCK_BUFFER;
|
|
priv->features |= FEATURE_TCO;
|
|
break;
|
|
|
|
case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0:
|
|
case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1:
|
|
case PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2:
|
|
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0:
|
|
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
|
|
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
|
|
priv->features |= FEATURE_IDF;
|
|
/* fall through */
|
|
default:
|
|
priv->features |= FEATURE_I2C_BLOCK_READ;
|
|
priv->features |= FEATURE_IRQ;
|
|
/* fall through */
|
|
case PCI_DEVICE_ID_INTEL_82801DB_3:
|
|
priv->features |= FEATURE_SMBUS_PEC;
|
|
priv->features |= FEATURE_BLOCK_BUFFER;
|
|
/* fall through */
|
|
case PCI_DEVICE_ID_INTEL_82801CA_3:
|
|
case PCI_DEVICE_ID_INTEL_82801BA_2:
|
|
case PCI_DEVICE_ID_INTEL_82801AB_3:
|
|
case PCI_DEVICE_ID_INTEL_82801AA_3:
|
|
break;
|
|
}
|
|
|
|
/* Disable features on user request */
|
|
for (i = 0; i < ARRAY_SIZE(i801_feature_names); i++) {
|
|
if (priv->features & disable_features & (1 << i))
|
|
dev_notice(&dev->dev, "%s disabled by user\n",
|
|
i801_feature_names[i]);
|
|
}
|
|
priv->features &= ~disable_features;
|
|
|
|
err = pcim_enable_device(dev);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
pcim_pin_device(dev);
|
|
|
|
/* Determine the address of the SMBus area */
|
|
priv->smba = pci_resource_start(dev, SMBBAR);
|
|
if (!priv->smba) {
|
|
dev_err(&dev->dev,
|
|
"SMBus base address uninitialized, upgrade BIOS\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
|
|
if (err) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
err = pcim_iomap_regions(dev, 1 << SMBBAR,
|
|
dev_driver_string(&dev->dev));
|
|
if (err) {
|
|
dev_err(&dev->dev,
|
|
"Failed to request SMBus region 0x%lx-0x%Lx\n",
|
|
priv->smba,
|
|
(unsigned long long)pci_resource_end(dev, SMBBAR));
|
|
return err;
|
|
}
|
|
|
|
pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &temp);
|
|
priv->original_hstcfg = temp;
|
|
temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */
|
|
if (!(temp & SMBHSTCFG_HST_EN)) {
|
|
dev_info(&dev->dev, "Enabling SMBus device\n");
|
|
temp |= SMBHSTCFG_HST_EN;
|
|
}
|
|
pci_write_config_byte(priv->pci_dev, SMBHSTCFG, temp);
|
|
|
|
if (temp & SMBHSTCFG_SMB_SMI_EN) {
|
|
dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
|
|
/* Disable SMBus interrupt feature if SMBus using SMI# */
|
|
priv->features &= ~FEATURE_IRQ;
|
|
}
|
|
|
|
/* Clear special mode bits */
|
|
if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
|
|
outb_p(inb_p(SMBAUXCTL(priv)) &
|
|
~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
|
|
|
|
/* Default timeout in interrupt mode: 200 ms */
|
|
priv->adapter.timeout = HZ / 5;
|
|
|
|
if (priv->features & FEATURE_IRQ) {
|
|
u16 pcictl, pcists;
|
|
|
|
/* Complain if an interrupt is already pending */
|
|
pci_read_config_word(priv->pci_dev, SMBPCISTS, &pcists);
|
|
if (pcists & SMBPCISTS_INTS)
|
|
dev_warn(&dev->dev, "An interrupt is pending!\n");
|
|
|
|
/* Check if interrupts have been disabled */
|
|
pci_read_config_word(priv->pci_dev, SMBPCICTL, &pcictl);
|
|
if (pcictl & SMBPCICTL_INTDIS) {
|
|
dev_info(&dev->dev, "Interrupts are disabled\n");
|
|
priv->features &= ~FEATURE_IRQ;
|
|
}
|
|
}
|
|
|
|
if (priv->features & FEATURE_IRQ) {
|
|
init_waitqueue_head(&priv->waitq);
|
|
|
|
err = devm_request_irq(&dev->dev, dev->irq, i801_isr,
|
|
IRQF_SHARED,
|
|
dev_driver_string(&dev->dev), priv);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Failed to allocate irq %d: %d\n",
|
|
dev->irq, err);
|
|
priv->features &= ~FEATURE_IRQ;
|
|
}
|
|
}
|
|
dev_info(&dev->dev, "SMBus using %s\n",
|
|
priv->features & FEATURE_IRQ ? "PCI interrupt" : "polling");
|
|
|
|
i801_add_tco(priv);
|
|
|
|
snprintf(priv->adapter.name, sizeof(priv->adapter.name),
|
|
"SMBus I801 adapter at %04lx", priv->smba);
|
|
err = i2c_add_adapter(&priv->adapter);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Failed to add SMBus adapter\n");
|
|
return err;
|
|
}
|
|
|
|
i801_probe_optional_slaves(priv);
|
|
/* We ignore errors - multiplexing is optional */
|
|
i801_add_mux(priv);
|
|
|
|
pci_set_drvdata(dev, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i801_remove(struct pci_dev *dev)
|
|
{
|
|
struct i801_priv *priv = pci_get_drvdata(dev);
|
|
|
|
i801_del_mux(priv);
|
|
i2c_del_adapter(&priv->adapter);
|
|
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
|
|
|
|
platform_device_unregister(priv->tco_pdev);
|
|
|
|
/*
|
|
* do not call pci_disable_device(dev) since it can cause hard hangs on
|
|
* some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
|
|
*/
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
|
|
{
|
|
struct i801_priv *priv = pci_get_drvdata(dev);
|
|
|
|
pci_save_state(dev);
|
|
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
|
|
pci_set_power_state(dev, pci_choose_state(dev, mesg));
|
|
return 0;
|
|
}
|
|
|
|
static int i801_resume(struct pci_dev *dev)
|
|
{
|
|
pci_set_power_state(dev, PCI_D0);
|
|
pci_restore_state(dev);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define i801_suspend NULL
|
|
#define i801_resume NULL
|
|
#endif
|
|
|
|
static struct pci_driver i801_driver = {
|
|
.name = "i801_smbus",
|
|
.id_table = i801_ids,
|
|
.probe = i801_probe,
|
|
.remove = i801_remove,
|
|
.suspend = i801_suspend,
|
|
.resume = i801_resume,
|
|
};
|
|
|
|
static int __init i2c_i801_init(void)
|
|
{
|
|
if (dmi_name_in_vendors("FUJITSU"))
|
|
input_apanel_init();
|
|
return pci_register_driver(&i801_driver);
|
|
}
|
|
|
|
static void __exit i2c_i801_exit(void)
|
|
{
|
|
pci_unregister_driver(&i801_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
|
|
MODULE_DESCRIPTION("I801 SMBus driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(i2c_i801_init);
|
|
module_exit(i2c_i801_exit);
|