mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
![Lakshmi Sowjanya D](/assets/img/avatar_default.png)
About Intel Keem Bay: ------------------- Intel Keem Bay is a computer vision AI accelerator SoC based on ARM CPU. Documentation of Keem Bay: Documentation/vpu/vpu-stack-overview.rst. Pinctrl IP: ---------- The SoC has a customised pinmux controller IP which controls pin multiplexing and configuration. Keem Bay pinctrl IP is not based on and have nothing in common with the existing pinctrl drivers. The registers used are incompatible with the existing drivers, so it requires a new driver. Add pinctrl driver to enable pin control support in the Intel Keem Bay SoC. Co-developed-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Co-developed-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210806142527.29113-3-lakshmi.sowjanya.d@intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
486 lines
13 KiB
Text
486 lines
13 KiB
Text
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# PINCTRL infrastructure and drivers
|
|
#
|
|
|
|
menuconfig PINCTRL
|
|
bool "Pin controllers"
|
|
|
|
if PINCTRL
|
|
|
|
config GENERIC_PINCTRL_GROUPS
|
|
bool
|
|
|
|
config PINMUX
|
|
bool "Support pin multiplexing controllers" if COMPILE_TEST
|
|
|
|
config GENERIC_PINMUX_FUNCTIONS
|
|
bool
|
|
select PINMUX
|
|
|
|
config PINCONF
|
|
bool "Support pin configuration controllers" if COMPILE_TEST
|
|
|
|
config GENERIC_PINCONF
|
|
bool
|
|
select PINCONF
|
|
|
|
config DEBUG_PINCTRL
|
|
bool "Debug PINCTRL calls"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say Y here to add some extra checks and diagnostics to PINCTRL calls.
|
|
|
|
config PINCTRL_ARTPEC6
|
|
bool "Axis ARTPEC-6 pin controller driver"
|
|
depends on MACH_ARTPEC6
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This is the driver for the Axis ARTPEC-6 pin controller. This driver
|
|
supports pin function multiplexing as well as pin bias and drive
|
|
strength configuration. Device tree integration instructions can be
|
|
found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
|
|
|
|
config PINCTRL_AS3722
|
|
tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
|
|
depends on MFD_AS3722 && GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
AS3722 device supports the configuration of GPIO pins for different
|
|
functionality. This driver supports the pinmux, push-pull and
|
|
open drain configuration for the GPIO pins of AS3722 devices. It also
|
|
supports the GPIO functionality through gpiolib.
|
|
|
|
config PINCTRL_AXP209
|
|
tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
|
|
depends on MFD_AXP20X
|
|
depends on OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
help
|
|
AXP PMICs provides multiple GPIOs that can be muxed for different
|
|
functions. This driver bundles a pinctrl driver to select the function
|
|
muxing and a GPIO driver to handle the GPIO when the GPIO function is
|
|
selected.
|
|
Say yes to enable pinctrl and GPIO support for the AXP209 PMIC
|
|
|
|
config PINCTRL_AT91
|
|
bool "AT91 pinctrl driver"
|
|
depends on OF
|
|
depends on ARCH_AT91
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
help
|
|
Say Y here to enable the at91 pinctrl driver
|
|
|
|
config PINCTRL_AT91PIO4
|
|
bool "AT91 PIO4 pinctrl driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
depends on ARCH_AT91 || COMPILE_TEST
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
|
|
controller available on sama5d2 SoC.
|
|
|
|
config PINCTRL_AMD
|
|
tristate "AMD GPIO pin control"
|
|
depends on HAS_IOMEM
|
|
depends on ACPI || COMPILE_TEST
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
help
|
|
driver for memory mapped GPIO functionality on AMD platforms
|
|
(x86 or arm).Most pins are usually muxed to some other
|
|
functionality by firmware,so only a small amount is available
|
|
for gpio use.
|
|
|
|
Requires ACPI/FDT device enumeration code to set up a platform
|
|
device.
|
|
|
|
config PINCTRL_BM1880
|
|
bool "Bitmain BM1880 Pinctrl driver"
|
|
depends on OF && (ARCH_BITMAIN || COMPILE_TEST)
|
|
default ARCH_BITMAIN
|
|
select PINMUX
|
|
help
|
|
Pinctrl driver for Bitmain BM1880 SoC.
|
|
|
|
config PINCTRL_DA850_PUPD
|
|
tristate "TI DA850/OMAP-L138/AM18XX pullup/pulldown groups"
|
|
depends on OF && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
help
|
|
Driver for TI DA850/OMAP-L138/AM18XX pinconf. Used to control
|
|
pullup/pulldown pin groups.
|
|
|
|
config PINCTRL_DA9062
|
|
tristate "Dialog Semiconductor DA9062 PMIC pinctrl and GPIO Support"
|
|
depends on MFD_DA9062
|
|
select GPIOLIB
|
|
help
|
|
The Dialog DA9062 PMIC provides multiple GPIOs that can be muxed for
|
|
different functions. This driver bundles a pinctrl driver to select the
|
|
function muxing and a GPIO driver to handle the GPIO when the GPIO
|
|
function is selected.
|
|
|
|
Say yes to enable pinctrl and GPIO support for the DA9062 PMIC.
|
|
|
|
config PINCTRL_DIGICOLOR
|
|
bool
|
|
depends on OF && (ARCH_DIGICOLOR || COMPILE_TEST)
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
|
|
config PINCTRL_LANTIQ
|
|
bool
|
|
depends on LANTIQ
|
|
select PINMUX
|
|
select PINCONF
|
|
|
|
config PINCTRL_LPC18XX
|
|
bool "NXP LPC18XX/43XX SCU pinctrl driver"
|
|
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
|
|
default ARCH_LPC18XX
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
|
|
|
|
config PINCTRL_FALCON
|
|
bool
|
|
depends on SOC_FALCON
|
|
depends on PINCTRL_LANTIQ
|
|
|
|
config PINCTRL_GEMINI
|
|
bool
|
|
depends on ARCH_GEMINI
|
|
default ARCH_GEMINI
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select MFD_SYSCON
|
|
|
|
config PINCTRL_MCP23S08_I2C
|
|
tristate
|
|
select REGMAP_I2C
|
|
|
|
config PINCTRL_MCP23S08_SPI
|
|
tristate
|
|
select REGMAP_SPI
|
|
|
|
config PINCTRL_MCP23S08
|
|
tristate "Microchip MCP23xxx I/O expander"
|
|
depends on SPI_MASTER || I2C
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select PINCTRL_MCP23S08_I2C if I2C
|
|
select PINCTRL_MCP23S08_SPI if SPI_MASTER
|
|
help
|
|
SPI/I2C driver for Microchip MCP23S08 / MCP23S17 / MCP23S18 /
|
|
MCP23008 / MCP23017 / MCP23018 I/O expanders.
|
|
This provides a GPIO interface supporting inputs and outputs and a
|
|
corresponding interrupt-controller.
|
|
|
|
config PINCTRL_OXNAS
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select GPIOLIB_IRQCHIP
|
|
select MFD_SYSCON
|
|
|
|
config PINCTRL_ROCKCHIP
|
|
tristate "Rockchip gpio and pinctrl driver"
|
|
depends on ARCH_ROCKCHIP || COMPILE_TEST
|
|
depends on OF
|
|
select GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GENERIC_IRQ_CHIP
|
|
select MFD_SYSCON
|
|
select OF_GPIO
|
|
default ARCH_ROCKCHIP
|
|
help
|
|
This support pinctrl and gpio driver for Rockchip SoCs.
|
|
|
|
config PINCTRL_SINGLE
|
|
tristate "One-register-per-pin type device tree based pinctrl driver"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the device tree based generic pinctrl driver.
|
|
|
|
config PINCTRL_SX150X
|
|
bool "Semtech SX150x I2C GPIO expander pinctrl driver"
|
|
depends on I2C=y
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select REGMAP
|
|
help
|
|
Say yes here to provide support for Semtech SX150x-series I2C
|
|
GPIO expanders as pinctrl module.
|
|
Compatible models include:
|
|
- 8 bits: sx1508q, sx1502q
|
|
- 16 bits: sx1509q, sx1506q
|
|
|
|
config PINCTRL_PISTACHIO
|
|
bool "IMG Pistachio SoC pinctrl driver"
|
|
depends on OF && (MIPS || COMPILE_TEST)
|
|
depends on GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
This support pinctrl and gpio driver for IMG Pistachio SoC.
|
|
|
|
config PINCTRL_ST
|
|
bool
|
|
depends on OF
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
|
|
config PINCTRL_STMFX
|
|
tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
|
|
depends on I2C
|
|
depends on OF_GPIO
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select MFD_STMFX
|
|
help
|
|
Driver for STMicroelectronics Multi-Function eXpander (STMFX)
|
|
GPIO expander.
|
|
This provides a GPIO interface supporting inputs and outputs,
|
|
and configuring push-pull, open-drain, and can also be used as
|
|
interrupt-controller.
|
|
|
|
config PINCTRL_MAX77620
|
|
tristate "MAX77620/MAX20024 Pincontrol support"
|
|
depends on MFD_MAX77620 && OF
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Say Yes here to enable Pin control support for Maxim PMIC MAX77620.
|
|
This PMIC has 8 GPIO pins that work as GPIO as well as special
|
|
function in alternate mode. This driver also configure push-pull,
|
|
open drain, FPS slots etc.
|
|
|
|
config PINCTRL_PALMAS
|
|
tristate "Pinctrl driver for the PALMAS Series MFD devices"
|
|
depends on OF && MFD_PALMAS
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
Palmas device supports the configuration of pins for different
|
|
functionality. This driver supports the pinmux, push-pull and
|
|
open drain configuration for the Palmas series devices like
|
|
TPS65913, TPS80036 etc.
|
|
|
|
config PINCTRL_PIC32
|
|
bool "Microchip PIC32 pin controller driver"
|
|
depends on OF
|
|
depends on MACH_PIC32
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB_IRQCHIP
|
|
select OF_GPIO
|
|
help
|
|
This is the pin controller and gpio driver for Microchip PIC32
|
|
microcontrollers. This option is selected automatically when specific
|
|
machine and arch are selected to build.
|
|
|
|
config PINCTRL_PIC32MZDA
|
|
def_bool y if PIC32MZDA
|
|
select PINCTRL_PIC32
|
|
|
|
config PINCTRL_ZYNQ
|
|
bool "Pinctrl driver for Xilinx Zynq"
|
|
depends on ARCH_ZYNQ
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the pinctrl driver for Xilinx Zynq.
|
|
|
|
config PINCTRL_ZYNQMP
|
|
tristate "Pinctrl driver for Xilinx ZynqMP"
|
|
depends on ZYNQMP_FIRMWARE
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
default ZYNQMP_FIRMWARE
|
|
help
|
|
This selects the pinctrl driver for Xilinx ZynqMP platform.
|
|
This driver will query the pin information from the firmware
|
|
and allow configuring the pins.
|
|
Configuration can include the mux function to select on those
|
|
pin(s)/group(s), and various pin configuration parameters
|
|
such as pull-up, slew rate, etc.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called pinctrl-zynqmp.
|
|
|
|
config PINCTRL_INGENIC
|
|
bool "Pinctrl driver for the Ingenic JZ47xx SoCs"
|
|
default MACH_INGENIC
|
|
depends on OF
|
|
depends on MIPS || COMPILE_TEST
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select REGMAP_MMIO
|
|
|
|
config PINCTRL_RK805
|
|
tristate "Pinctrl and GPIO driver for RK805 PMIC"
|
|
depends on MFD_RK808
|
|
select GPIOLIB
|
|
select PINMUX
|
|
select GENERIC_PINCONF
|
|
help
|
|
This selects the pinctrl driver for RK805.
|
|
|
|
config PINCTRL_OCELOT
|
|
bool "Pinctrl driver for the Microsemi Ocelot and Jaguar2 SoCs"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
select REGMAP_MMIO
|
|
|
|
config PINCTRL_MICROCHIP_SGPIO
|
|
bool "Pinctrl driver for Microsemi/Microchip Serial GPIO"
|
|
depends on OF
|
|
depends on HAS_IOMEM
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select OF_GPIO
|
|
help
|
|
Support for the serial GPIO interface used on Microsemi and
|
|
Microchip SoC's. By using a serial interface, the SIO
|
|
controller significantly extends the number of available
|
|
GPIOs with a minimum number of additional pins on the
|
|
device. The primary purpose of the SIO controller is to
|
|
connect control signals from SFP modules and to act as an
|
|
LED controller.
|
|
|
|
config PINCTRL_K210
|
|
bool "Pinctrl driver for the Canaan Kendryte K210 SoC"
|
|
depends on RISCV && SOC_CANAAN && OF
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GENERIC_PINCONF
|
|
select GPIOLIB
|
|
select OF_GPIO
|
|
select REGMAP_MMIO
|
|
default SOC_CANAAN
|
|
help
|
|
Add support for the Canaan Kendryte K210 RISC-V SOC Field
|
|
Programmable IO Array (FPIOA) controller.
|
|
|
|
config PINCTRL_KEEMBAY
|
|
tristate "Pinctrl driver for Intel Keem Bay SoC"
|
|
depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
|
|
depends on HAS_IOMEM
|
|
select PINMUX
|
|
select PINCONF
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
select GPIOLIB
|
|
select GPIOLIB_IRQCHIP
|
|
select GPIO_GENERIC
|
|
help
|
|
This selects pin control driver for the Intel Keembay SoC.
|
|
It provides pin config functions such as pullup, pulldown,
|
|
interrupt, drive strength, sec lock, schmitt trigger, slew
|
|
rate control and direction control. This module will be
|
|
called as pinctrl-keembay.
|
|
|
|
source "drivers/pinctrl/actions/Kconfig"
|
|
source "drivers/pinctrl/aspeed/Kconfig"
|
|
source "drivers/pinctrl/bcm/Kconfig"
|
|
source "drivers/pinctrl/berlin/Kconfig"
|
|
source "drivers/pinctrl/freescale/Kconfig"
|
|
source "drivers/pinctrl/intel/Kconfig"
|
|
source "drivers/pinctrl/mvebu/Kconfig"
|
|
source "drivers/pinctrl/nomadik/Kconfig"
|
|
source "drivers/pinctrl/nuvoton/Kconfig"
|
|
source "drivers/pinctrl/pxa/Kconfig"
|
|
source "drivers/pinctrl/qcom/Kconfig"
|
|
source "drivers/pinctrl/ralink/Kconfig"
|
|
source "drivers/pinctrl/renesas/Kconfig"
|
|
source "drivers/pinctrl/samsung/Kconfig"
|
|
source "drivers/pinctrl/spear/Kconfig"
|
|
source "drivers/pinctrl/sprd/Kconfig"
|
|
source "drivers/pinctrl/stm32/Kconfig"
|
|
source "drivers/pinctrl/sunxi/Kconfig"
|
|
source "drivers/pinctrl/tegra/Kconfig"
|
|
source "drivers/pinctrl/ti/Kconfig"
|
|
source "drivers/pinctrl/uniphier/Kconfig"
|
|
source "drivers/pinctrl/vt8500/Kconfig"
|
|
source "drivers/pinctrl/mediatek/Kconfig"
|
|
source "drivers/pinctrl/meson/Kconfig"
|
|
source "drivers/pinctrl/cirrus/Kconfig"
|
|
source "drivers/pinctrl/visconti/Kconfig"
|
|
|
|
config PINCTRL_XWAY
|
|
bool
|
|
depends on SOC_TYPE_XWAY
|
|
depends on PINCTRL_LANTIQ
|
|
|
|
config PINCTRL_TB10X
|
|
bool
|
|
depends on OF && ARC_PLAT_TB10X
|
|
select GPIOLIB
|
|
|
|
config PINCTRL_EQUILIBRIUM
|
|
tristate "Generic pinctrl and GPIO driver for Intel Lightning Mountain SoC"
|
|
depends on OF && HAS_IOMEM
|
|
depends on X86 || COMPILE_TEST
|
|
select PINMUX
|
|
select PINCONF
|
|
select GPIOLIB
|
|
select GPIO_GENERIC
|
|
select GPIOLIB_IRQCHIP
|
|
select GENERIC_PINCONF
|
|
select GENERIC_PINCTRL_GROUPS
|
|
select GENERIC_PINMUX_FUNCTIONS
|
|
|
|
help
|
|
Equilibrium pinctrl driver is a pinctrl & GPIO driver for Intel Lightning
|
|
Mountain network processor SoC that supports both the linux GPIO and pin
|
|
control frameworks. It provides interfaces to setup pinmux, assign desired
|
|
pin functions, configure GPIO attributes for LGM SoC pins. Pinmux and
|
|
pinconf settings are retrieved from device tree.
|
|
|
|
endif
|