This allows reading the metadata contained in tar-split
without expensively recreating the whole tar stream
including full contents.
We have two use cases for this:
- In a situation where tar-split is distributed along with
a separate metadata stream, ensuring that the two are
exactly consistent
- Reading the tar headers allows making a ~cheap check
of consistency of on-disk layers, just checking that the
files exist in expected sizes, without reading the full
contents.
This can be implemented outside of this repo, but it's
not ideal:
- The function necessarily hard-codes some assumptions
about how tar-split determines the boundaries of
SegmentType/FileType entries (or, indeed, whether it
uses FileType entries at all). That's best maintained
directly beside the code that creates this.
- The ExpectedPadding() value is not currently exported,
so the consumer would have to heuristically guess where
the padding ends.
Signed-off-by: Miloslav Trmač <mitr@redhat.com>
I intend to not make changes to this `archive/tar` that aren't from
upstream, or are not directly related to the usage by this project...
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
This is a port of commits adding RawHeader() to go-1.11 archive/tar.
In addition:
* simplify the rawBytes.Write() code in readHeader()
* ignore errors from rawBytes.Write(), as (at least for go-1.11)
it never returns an error, only panics (if the buffer grew too large)
Also, remove the internal/testenv from tar_tar.go to enable go test.
As working symlink detection is non-trivial on Windows, just skip
the test on that platform.
In addition to `go test`, I did some minimal manual testing, and
it seems this code creates tar-data.json.gz which is identical
to the one made by the old version.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Commit dd5e14a7511465d20c6e95bf54c9b8f999abbbf6 ensured that no data
could be read for header-only files regardless of what the Header.Size
said. We should document this fact in Reader.Read.
Updates #13647
Change-Id: I4df9a2892bc66b49e0279693d08454bf696cfa31
Reviewed-on: https://go-review.googlesource.com/17913
Reviewed-by: Russ Cox <rsc@golang.org>
Motivation:
* Previous implementation did not detect integer overflow when
parsing a base-256 encoded field.
* Previous implementation did not treat the integer as a two's
complement value as specified by GNU.
The relevant GNU specification says:
<<<
GNU format uses two's-complement base-256 notation to store values
that do not fit into standard ustar range.
>>>
Fixes#12435
Change-Id: I4639bcffac8d12e1cb040b76bd05c9d7bc6c23a8
Reviewed-on: https://go-review.googlesource.com/17424
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Motivation:
* Previous implementation silently failed when an integer overflow
occurred. Now, we report an ErrFieldTooLong.
* Previous implementation did not encode in two's complement format and was
unable to encode negative numbers.
The relevant GNU specification says:
<<<
GNU format uses two's-complement base-256 notation to store values
that do not fit into standard ustar range.
>>>
Fixes#12436
Change-Id: I09c20602eabf8ae3a7e0db35b79440a64bfaf807
Reviewed-on: https://go-review.googlesource.com/17425
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Motivation for change:
* Recursive logic is hard to follow, since it tends to apply
things in reverse. On the other hand, the tar formats tend to
describe meta headers as affecting the next entry.
* Recursion also applies changes in the wrong order. Two test
files are attached that use multiple headers. The previous Go
behavior differs from what GNU and BSD tar do.
Change-Id: Ic1557256fc1363c5cb26570e5d0b9f65a9e57341
Reviewed-on: https://go-review.googlesource.com/14624
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Motivations for this change:
* It allows these functions to be used outside of Reader/Writer.
* It allows these functions to be more easily unit tested.
Change-Id: Iebe2b70bdb8744371c9ffa87c24316cbbf025b59
Reviewed-on: https://go-review.googlesource.com/15113
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Motivations:
* Use of strconv.ParseInt does not properly treat integers as 64bit,
preventing this function from working properly on 32bit machines.
* Use of io.ReadFull does not properly detect truncated streams
when the file suddenly ends on a block boundary.
* The function blindly trusts user input for numEntries and allocates
memory accordingly.
* The function does not validate that numEntries is not negative,
allowing a malicious sparse file to cause a panic during make.
In general, this function was overly complicated for what it was
accomplishing and it was hard to reason that it was free from
bounds errors. Instead, it has been rewritten and relies on
bytes.Buffer.ReadString to do the main work. So long as invariants
about the number of '\n' in the buffer are maintained, it is much
easier to see why this approach is correct.
Change-Id: Ibb12c4126c26e0ea460ea063cd17af68e3cf609e
Reviewed-on: https://go-review.googlesource.com/15174
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Certain special type-flags, specifically 1, 2, 3, 4, 5, 6,
do not have a data section. Thus, regardless of what the size field
says, we should not attempt to read any data for these special types.
The relevant PAX and USTAR specification says:
<<<
If the typeflag field is set to specify a file to be of type 1 (a link)
or 2 (a symbolic link), the size field shall be specified as zero.
If the typeflag field is set to specify a file of type 5 (directory),
the size field shall be interpreted as described under the definition
of that record type. No data logical records are stored for types 1, 2, or 5.
If the typeflag field is set to 3 (character special file),
4 (block special file), or 6 (FIFO), the meaning of the size field is
unspecified by this volume of POSIX.1-2008, and no data logical records shall
be stored on the medium.
Additionally, for type 6, the size field shall be ignored when reading.
If the typeflag field is set to any other value, the number of logical
records written following the header shall be (size+511)/512, ignoring
any fraction in the result of the division.
>>>
Contrary to the specification, we do not assert that the size field
is zero for type 1 and 2 since we liberally accept non-conforming formats.
Change-Id: I666b601597cb9d7a50caa081813d90ca9cfc52ed
Reviewed-on: https://go-review.googlesource.com/16614
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replaces PID in PaxHeaders with 0. Sorts PAX header keys before writing
them to the archive.
Fixes#12358
Change-Id: If239f89c85f1c9d9895a253fb06a47ad44960124
Reviewed-on: https://go-review.googlesource.com/13975
Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Joe Tsai <joetsai@digital-static.net>
Motivation:
* Reader.skipUnread never reports io.ErrUnexpectedEOF. This is strange
given that io.ErrUnexpectedEOF is given through Reader.Read if the
user manually reads the file.
* Reader.skipUnread fails to detect truncated files since io.Seeker
is lazy about reporting errors. Thus, the behavior of Reader differs
whether the input io.Reader also satisfies io.Seeker or not.
To solve this, we seek to one before the end of the data section and
always rely on at least one call to io.CopyN. If the tr.r satisfies
io.Seeker, this is guarunteed to never read more than blockSize.
Fixes#12557
Change-Id: I0ddddfc6bed0d74465cb7e7a02b26f1de7a7a279
Reviewed-on: https://go-review.googlesource.com/15175
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Motivation:
* The logic to verify the numEntries can overflow and incorrectly
pass, allowing a malicious file to allocate arbitrary memory.
* The use of strconv.ParseInt does not set the integer precision
to 64bit, causing this code to work incorrectly on 32bit machines.
Change-Id: I1b1571a750a84f2dde97cc329ed04fe2342aaa60
Reviewed-on: https://go-review.googlesource.com/15173
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
A recursive call to Reader.Next did not check the error before
trying to use the result, leading to a nil pointer panic.
This specific CL addresses the immediate issue, which is the panic,
but does not solve the root issue, which is due to an integer
overflow in the base-256 parser.
Updates #12435
Change-Id: Ia908671f0f411a409a35e24f2ebf740d46734072
Reviewed-on: https://go-review.googlesource.com/15437
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Motivation:
* There are an increasing number of "one-off" corrupt files added
to make sure that package does not succeed or crash on them.
Instead, allow for the test to specify the error that is expected
to occur (if any).
* Also, fold in the logic to check the MD5 checksum into this
function.
The following tests are being removed:
* TestIncrementalRead: Done by TestReader by using io.CopyBuffer
with a buffer of 8. This achieves the same behavior as this test.
* TestSparseEndToEnd: Since TestReader checks the MD5 checksums
if the input corpus provides them, then this is redundant.
* TestSparseIncrementalRead: Redundant for the same reasons that
TestIncrementalRead is now redundant
* TestNegativeHdrSize: Added to TestReader corpus
* TestIssue10968: Added to TestReader corpus
* TestIssue11169: Added to TestReader corpus
With this change, code coverage did not change: 85.3%
Change-Id: I8550d48657d4dbb8f47dfc3dc280758ef73b47ec
Reviewed-on: https://go-review.googlesource.com/15176
Reviewed-by: Andrew Gerrand <adg@golang.org>
If the stream is in an inconsistent state, it does not make sense
that Reader.Read can be called and possibly succeed.
Change-Id: I9d1c5a1300b2c2b45232188aa7999e350809dcf2
Reviewed-on: https://go-review.googlesource.com/15177
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
The sparseFileReader is prone to two different forms of
denial-of-service attacks:
* A malicious tar file can cause an infinite loop
* A malicious tar file can cause arbitrary panics
This results because of poor error checking/handling, which this
CL fixes. While we are at it, add a plethora of unit tests to
test for possible malicious inputs.
Change-Id: I2f9446539d189f3c1738a1608b0ad4859c1be929
Reviewed-on: https://go-review.googlesource.com/15115
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Convert splitUSTARPath to return a bool rather than an error since
the caller never ever uses the error other than to check if it is
nil. Thus, we can remove errNameTooLong as well.
Also, fold the checking of the length <= fileNameSize and whether
the string is ASCII into the split function itself.
Lastly, remove logic to set the MAGIC since that's already done on
L200. Thus, setting the magic is redundant.
There is no overall logic change.
Updates #12638
Change-Id: I26b6992578199abad723c2a2af7f4fc078af9c17
Reviewed-on: https://go-review.googlesource.com/14723
Reviewed-by: David Symonds <dsymonds@golang.org>
Run-TryBot: David Symonds <dsymonds@golang.org>
Do not assume that if stat shows multiple links that we should mark the
file as a hardlink in the tar format. If the hardlink link was not
referenced, this caused a link to "/". On an overlay file system, all
files have multiple links.
The caller must keep the inode references and set TypeLink, Size = 0,
and LinkName themselves.
Change-Id: I873b8a235bc8f8fbb271db74ee54232da36ca013
Reviewed-on: https://go-review.googlesource.com/13045
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
The issue was identified while
working with round trip FileInfo of the headers of hardlinks. Also,
additional test cases for hard link handling.
(review carried over from http://golang.org/cl/165860043)
Fixes#9027
Change-Id: I9e3a724c8de72eb1b0fbe0751a7b488894911b76
Reviewed-on: https://go-review.googlesource.com/6790
Reviewed-by: Russ Cox <rsc@golang.org>
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Check for errors when reading the headers following the pax headers.
Fixes#11169.
Change-Id: Ifec4a949ec8df8b49fa7cb7a67eb826fe2282ad8
Reviewed-on: https://go-review.googlesource.com/11031
Reviewed-by: Russ Cox <rsc@golang.org>
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Sanity check the pax-header size field before using it.
Fixes#11167.
Change-Id: I9d5d0210c3990e6fb9434c3fe333be0d507d5962
Reviewed-on: https://go-review.googlesource.com/10954
Reviewed-by: David Symonds <dsymonds@golang.org>
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Write should return ErrWriteAfterClose instead
of ErrWriteTooLong when called after Close.
Change-Id: If5ec4ef924e4c56489e0d426976f7e5fad79be9b
Reviewed-on: https://go-review.googlesource.com/9259
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
Archives produced with GNU tar can have types of TypeGNULongName and
TypeGNULongLink.
These fields effectively appear like two file entries in the tar
archive. While golang's `archive/tar` transparently provide the file
name and headers and file payload, the access to the raw bytes is still
needed.
This fixes the access to the longlink header, it's payload (of the long
file path name), and the following file header and actual file payload.
