A previous PR placed the version string replacement in the `init`
function in the other commands. This makes this same change consistently
in the `dist` tool.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After implementing pull, a few changes are required to the content store
interface to make sure that the implementation works smoothly.
Specifically, we work to make sure the predeclaration path for digests
works the same between remote and local writers. Before, we were
hesitent to require the the size and digest up front, but it became
clear that having this provided significant benefit.
There are also several cleanups related to naming. We now call the
expected digest `Expected` consistently across the board and `Total` is
used to mark the expected size.
This whole effort comes together to provide a very smooth status
reporting workflow for image pull and push. This will be more obvious
when the bulk of pull code lands.
There are a few other changes to make `content.WriteBlob` more broadly
useful. In accordance with addition for predeclaring expected size when
getting a `Writer`, `WriteBlob` now supports this fully. It will also
resume downloads if provided an `io.Seeker` or `io.ReaderAt`. Coupled
with the `httpReadSeeker` from `docker/distribution`, we should only be
a lines of code away from resumable downloads.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This setup will now correctly set the version number from the git tag.
When using `--version`, we will see the binary name, the package it was
built from and a git hash based on the tag:
```console
$./bin/dist -v
./bin/dist github.com/docker/containerd 0b45d91.m
```
Note that in the above example, if we set a tag of `v1.0.0-dev`, that
will show up in the version number, as follows:
```console
$./bin/dist -v
./bin/dist github.com/docker/containerd v1.0.0-dev
```
Once commits are made past that tag, the version number will be
expressed relative to that tag and include a git hash:
```console
$./bin/dist -v
./bin/dist github.com/docker/containerd v1.0.0-dev-1-g7953e96.m
```
Some these examples include a `.m` postfix. This indicates that the
binary was build from a source tree with local modifications.
We can add a dev tag to start getting 1.0 version numbers for test
builds.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Add registration for more subsystems via plugins
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Move content service to separate package
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
We've moved to using the config, directly. This removes the argument and
gets rid of a few extra lines of code.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
Following from the rest of the work in this branch, we now are porting
the dist command to work directly against the containerd content API.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
After iterating on the GRPC API, the changes required for the actual
implementation are now included in the content store. The begin change
is the move to a single, atomic `Ingester.Writer` method for locking
content ingestion on a key. From this, comes several new interface
definitions.
The main benefit here is the clarification between `Status` and `Info`
that came out of the GPRC API. `Status` tells the status of a write,
whereas `Info` is for querying metadata about various blobs.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This adds a config file for containerd configuration. It is hard to
have structure data on cli flags and the config file should be used for
the majority of fields when configuring containerd.
There are still a few flags on the daemon that override config file
values but flags should take a back seat going forward and should be
kept at a minimum.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
It's duplicate with --log-level, and since --log-level
takes advantage of --debug and it has default value,
--debug never works now.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Removed unused requires root test function and updated
tar requires function to use lookup method.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
After trying to explain the complexities of developing with protobuf, I
have now created a command that correctly calculates the import paths
for each package and runs the protobuf command.
The Makefile has been updated accordingly, expect we now no longer use
`go generate`. A new target `protos` has been defined. We alias the two,
for the lazy. We leave `go generate` in place for cases where we will
actually use `go generate`.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changeset adds the simple apply command. It consumes a tar layer
and applies that layer to the specified directory. For the most part, it
is a direct call into Docker's `pkg/archive.ApplyLayer`.
The following demonstrates unpacking the wordpress rootfs into a local
directory `wordpress`:
```
$ ./dist fetch docker.io/library/wordpress 4.5 mediatype:application/vnd.docker.distribution.manifest.v2+json | \
jq -r '.layers[] | "sudo ./dist apply ./wordpress < $(./dist path -n "+.digest+")"' | xargs -I{} -n1 sh -c "{}"
```
Note that you should have fetched the layers into the local content
store before running the above. Alternatively, you can just read the
manifest from the content store, rather than fetching it. We use fetch
above to avoid having to lookup the manifest digest for our demo.
This tool has a long way to go. We still need to incorporate
snapshotting, as well as the ability to calculate the `ChainID` under
subsequent unpacking. Once we have some tools to play around with
snapshotting, we'll be able to incorporate our `rootfs.ApplyLayer`
algorithm that will get us a lot closer to a production worthy system.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
With this change, we add the following commands to the dist tool:
- `ingest`: verify and accept content into storage
- `active`: display active ingest processes
- `list`: list content in storage
- `path`: provide a path to a blob by digest
- `delete`: remove a piece of content from storage
We demonstrate the utility with the following shell pipeline:
```
$ ./dist fetch docker.io/library/redis latest mediatype:application/vnd.docker.distribution.manifest.v2+json | \
jq -r '.layers[] | "./dist fetch docker.io/library/redis "+.digest + "| ./dist ingest --expected-digest "+.digest+" --expected-size "+(.size | tostring) +" docker.io/library/redis@"+.digest' | xargs -I{} -P10 -n1 sh -c "{}"
```
The above fetches a manifest, pipes it to jq, which assembles a shell
pipeline to ingest each layer into the content store. Because the
transactions are keyed by their digest, concurrent downloads and
downloads of repeated content are ignored. Each process is then executed
parallel using xargs.
Put shortly, this is a parallel layer download.
In a separate shell session, could monitor the active downloads with the
following:
```
$ watch -n0.2 ./dist active
```
For now, the content is downloaded into `.content` in the current
working directory. To watch the contents of this directory, you can use
the following:
```
$ watch -n0.2 tree .content
```
This will help to understand what is going on internally.
To get access to the layers, you can use the path command:
```
$./dist path sha256:010c454d55e53059beaba4044116ea4636f8dd8181e975d893931c7e7204fffa
sha256:010c454d55e53059beaba4044116ea4636f8dd8181e975d893931c7e7204fffa /home/sjd/go/src/github.com/docker/containerd/.content/blobs/sha256/010c454d55e53059beaba4044116ea4636f8dd8181e975d893931c7e7204fffa
```
When you are done, you can clear out the content with the classic xargs
pipeline:
```
$ ./dist list -q | xargs ./dist delete
```
Note that this is mostly a POC. Things like failed downloads and
abandoned download cleanup aren't quite handled. We'll probably make
adjustments around how content store transactions are handled to address
this.
From here, we'll build out full image pull and create tooling to get
runtime bundles from the fetched content.
Signed-off-by: Stephen J Day <stephen.day@docker.com>
