We want to drop brute force mechainism for handling image
movement, this patch experiments with moving kpod pull
to use new libpod interfaces.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
When performing a tag, if a shortname was provided, tag.go would
preprend docker.io to the shortname through the ParseNormalized
function. Here we work around that such that is a short name
and tag are provided, the resulting tag will be shortname:tag. If
a shortname is provided without a tag, we append "latest" as the
tag.
Added specific tag tests too
Signed-off-by: baude <bbaude@redhat.com>
Kpod rm removes a container from the system
Signed-off-by: Ryan Cole <rcyoalne@gmail.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Signed-off-by: umohnani8 <umohnani@redhat.com>
Add new directory /etc/crio/hooks.d, where packagers can drop a json config
file to specify a hook.
The json must specify a valid executable to run.
The json must also specify which stage(s) to run the hook:
prestart, poststart, poststop
The json must specify under which criteria the hook should be launched
If the container HasBindMounts
If the container cmd matches a list of regular expressions
If the containers annotations matches a list of regular expressions.
If any of these match the the hook will be launched.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
kpod must parse the crio configuration file or the storage
is not set up correctly. By default it is not. We now read
/etc/crio/crio.conf in as the configuration file unless it is
overriden by the user and the global -c|--config switch.
Signed-off-by: baude <bbaude@redhat.com>
The getCommand func strips out unwanted characters around the
command of the container. The JSON output should use this func
like the regular ps output for both consistency and because
Python does a literal interpretation of the bracket [] characters
when consuming as JSON.
Signed-off-by: baude <bbaude@redhat.com>
Some kpod commands were listed twice in main.go. Removed these
duplicates and alphabetized the remaining commands to prevent this
from happening in the future
Signed-off-by: Ryan Cole <rcyoalne@gmail.com>
Consumers of the json output, like the atomic cli, need the ID of the
image for the container as well as the name. Specifically, it is used
to tract "used" and "vulnerable" images.
Signed-off-by: baude <bbaude@redhat.com>
Have the "kpod info" command also package up the driver-level status
information that the github.com/containers/storage.Store's Status()
method returns.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
No reason to carry this temporary variable for documentation purposes.
If in the future we find that it is necessary to add a CLI option, we
can add the variable then.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Changed the JSON output to hold the actual type of the data.
For example the creation time of a container will be of form time.Time.
The human readable output modifies all the fields to type string, which
is not helpful when the JSON output wants to be used for further processing.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Before exiting, have kpod shut down the storage library if it can. This
should keep us from leaving mountpoints for the root (for non-vfs cases)
and run directory (with newer containers/storage) busy when testing kpod.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
We want all kpod subcommands to use the formats code to output
formats like json. Altering kpod diff --json to kpod diff --format json
like the kpod images command.
Signed-off-by: baude <bbaude@redhat.com>
Add functions to go templates such as truncating a field. Also add
the table keyword, which, if placed at the beginning of a format string,
adds headers to the output
Signed-off-by: Ryan Cole <rcyoalne@gmail.com>
This allows the container list API to return updated status
for exited container without having to call container status first.
Signed-off-by: Mrunal Patel <mpatel@redhat.com>
For kpod images, we need to output in JSON format so that consumers
(programatic) have structured input to work with.
kpod images --format json
Signed-off-by: baude <bbaude@redhat.com>
Also set default level of logging to errors, we should not see
info messages in the kpod command line.
While adding this patch, I found missing options in kpod command line
and bash completions, so I added them in.
Also fixed some sorting issues in the way commands are displayer in help or in
bash completions.
Finally fixed the error message to be output on failure using logrus.Errorf, so
we don't get the stack any longer.
Also updated README.md with missing kpod commands.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
kpod diff reports on differences between two layers, specified as
layer IDs, containers, or images. In the case of containers or
images, kpod diff produces a diff for the top layer
Signed-off-by: Ryan Cole <rcyoalne@gmail.com>
We add two flags --enable-metrics and --metrics-port
to enable metrics endpoint and allow specifying the
port which defaults to 9090.
Signed-off-by: Mrunal Patel <mrunalp@gmail.com>
This command will allow users to manipulate and examine the container
images from outside of the container.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
Need to mv to latest released and supported version of logrus
switch github.com/Sirupsen/logrus github.com/sirupsen/logrus
Also vendor in latest containers/storage and containers/image
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We already parse every image if there's a label filter so that we can
check against the filter, so when we do that, go ahead and read the
OCI-format configuration and inspection data as well, and use an image's
creation date as recorded in inspection data everywhere.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Make getStore() take a config struct from which it pulls the store
options, then update the kpod commands so that they call getConfig()
and pass the config into getStore()
Signed-off-by: Ryan Cole <rcyoalne@gmail.com>
Avoid parsing metadata that the image library keeps in order to find an
image's top layer and creation date; instead, use the values which the
storage library now makes available, which will be correct once we merge
PR #654 or something like it.
Instead of assuming the last blob which was added for the image was the
manifest, read it directly and compute its digest ourselves.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Switch from using the lower-level storage APIs (accessing LayerStore,
ImageStore, and ContainerStore types directly) in favor of the
higher-level ones that take care of synchronization and locking for us.
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Bump containers/image (pulling in its new dependency on ostree-go),
containers/storage, and updated image-spec.
This pulls in the OCI v1.0 specifications and code that allows us to
support 1.0 images.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: Nalin Dahyabhai <nalin@redhat.com>
Design: The output of the `info` subcommand ought to be directly
consumable in a format like JSON or yaml.
The structure being a map of sorts.
Each subsection of information being an individual cluster under the
top-level, like platform info, debug, storage, etc.
Even if there are errors under the top level key, the value will be a
map with the key of "error" and the value as the message of the
`err.Error()`. In this way, the command always returns usable output.
Ideally there will be a means for anything that can register info to do
so independently from it being in the single info.go, so this approach
is having a typed signature for the function that gives info, but i'm
sure it could be better.
Current iteration of this outputs the following as a limited user:
```yaml
host:
MemFree: 711307264
MemTotal: 2096222208
SwapFree: 2147479552
SwapTotal: 2147479552
arch: amd64
cpus: 1
os: linux
store:
error: 'mkdir /var/run/containers/storage: permission denied'
```
and as root (`sudo kpod info -D`):
```yaml
debug:
compiler: gc
go version: go1.7.6
goroutines: 3
host:
MemFree: 717795328
MemTotal: 2096222208
SwapFree: 2147479552
SwapTotal: 2147479552
arch: amd64
cpus: 1
os: linux
store:
ContainerStore:
number: 1
GraphDriverName: overlay2
GraphRoot: /var/lib/containers/storage
ImageStore:
number: 1
```
And with the `--json --debug` flag:
```json
{
"debug": {
"compiler": "gc",
"go version": "go1.7.6",
"goroutines": 3
},
"host": {
"MemFree": 709402624,
"MemTotal": 2096222208,
"SwapFree": 2147479552,
"SwapTotal": 2147479552,
"arch": "amd64",
"cpus": 1,
"os": "linux"
},
"store": {
"ContainerStore": {
"number": 1
},
"GraphDriverName": "overlay2",
"GraphRoot": "/var/lib/containers/storage",
"ImageStore": {
"number": 1
}
}
}
```
Signed-off-by: Vincent Batts <vbatts@hashbangbash.com>
We now have actual kpod code, so no reason to have a not implemented feature.
Especially when we don't intend to create kpod launch.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
