release 3.16

https://sourceforge.net/projects/elilo/files/elilo/elilo-3.16/

ChangeLog

@@ -1,4 +1,22 @@
-2011-1-10 signed off by Jason Fleischli <jason.fleischli@hp.com>
+2013-03-27 signed off by Jason Fleischli <fleischli@users.sourceforge.net>
+	* ADD CROSSBUILD
+	* intake edited version of Debian x86x crossbuild patches.
+	* Fixed Makefile clean to include crossbuild envs.
+	* Fixed ia32 system.c compile warning
+	* Simplified efi no GOP warning so it doesnt look like an error.
+	* MAJOR: Fixed Fault crash when EFI memory map changes from under elilo.
+	  (from an outside interrupt in this case). When the EFI Memory map 
+	  changes after elilo has already built boot params to pass to the 
+	  kernel the EFI call to ExitBootSvcs just prior to boot will fail 
+	  because elilo has the old map key. This is valid EFI behavior, elilo
+	  retries to pick up the new memory map and valid key but had already 
+	  freed the start params portion of boot params resulting in a NULL 
+	  DEREF crash reset.
+	* Add console reset call during initialization. thanks A. Steinmetz
+	* minor bugfix, fixed -m option broken. thanks Allan-lsk.
+	* tag 3_16 for release
+
+2011-1-10 signed off by Jason Fleischli <fleischli@users.sourceforge.net>
 	* Uptake of SUSE patches
 	- add sysfs support for efi vars (formerly /proc/efi/vars)
 	- fix strncpy overflow
@@ -12,7 +30,7 @@
 	* replace error output on GOP handle failed, downgraded to normal
 	  print status with more informative output.
 
-2009-10-22 signed off by Jason Fleischli <jason.fleischli@hp.com>
+2009-10-22 signed off by Jason Fleischli <fleischli@users.sourceforge.net>
 	* elilo 3.12 release commit
 	* Added additional #defines for debug levels to reduce the output
 	* Added Mac console patch rework from Julien Blache @ debian
@@ -34,7 +52,8 @@
 	  x86_64... this is a legacy design hold over from original design and
 	  needs to be re-written to do dynamic size memory management based on
 	  the size of the actual vmlinuz image, as ia64/gzip does. 
-2008-04-02 signed off by Jason Fleischli <jason.fleischli@hp.com>
+
+2008-04-02 signed off by Jason Fleischli <fleischli@users.sourceforge.net>
 	* elilo 3.10 release commit
 	* Bumped version string to 3.10
 	* added PTR_FMT 32bit & 64bit pointer translation for correct output
@@ -54,10 +73,10 @@
 	* bugfix loader_probe now correctly errors out if no loaders
 	  registered.
 
-2008-01-11 signed off by Jason Fleischli <jason.fleischli@hp.com>
+2008-01-11 signed off by Jason Fleischli <fleischli@users.sourceforge.net>
 	* Various compile warning cleanups.
 
-2008-01-03 signed off by Jason Fleischli <jason.fleischli@hp.com>
+2008-01-03 signed off by Jason Fleischli <fleischli@users.sourceforge.net>
 	* Patch contribution from Scott Davilla <davilla@4pi.com>
 	  when x is zero for the first call to add_memory_region, e820_map[-1] 
 	  will access memory outside the bounds of e820_map. While this does 
@@ -66,7 +85,7 @@
 	  bootloader, the code should not access outside the bounds of 
 	  structures. 
 
-2008-01-03 Jason Fleischli <jason.fleischli@hp.com>
+2008-01-03 Jason Fleischli <fleischli@users.sourceforge.net>
 	* initrd.c -- Let the allocator decide where to grab the memory from 
 	  the efi memory map. Current start_addr=image->start_addr forces the 
 	  same efi region everytime, and has a 7mb limit. ramdisk (initrd.img) 
@@ -75,10 +94,10 @@
 	  NULL at initialization forces alloc_pages to get a memory region 
 	  sufficient for the size of the initrd image.
 
-2007-12-19 Jason Fleischli <jason.fleischli@hp.com>
+2007-12-19 Jason Fleischli <fleischli@users.sourceforge.net>
 	* bumping version string to 3.8
 
-2007-12-19 Jason Fleischli <jason.fleischli@hp.com>
+2007-12-19 Jason Fleischli <fleischli@users.sourceforge.net>
 	* MORE PATCHES FROM INTEL FOR IA32 X86_64.
 	* Fix compile warning for cmdline_addr assignment.
 	* Fix an issue caused by uninitialized e820_nr_map in fill_e820map.
@@ -103,13 +122,13 @@
 	* E820 memory map is added to IA32 to make it possible for
 	  Linux kernel not to depend on EFI memory map on EFI 32.
 
-2007-09-27 Jason Fleischli <jason.fleischli@hp.com>
+2007-09-27 Jason Fleischli <fleischli@users.sourceforge.net>
 	* updating changelog for last commit that was omitted
 	* incorporating AGriffis patches to enhance parsing
 	  passes root= option to kernel options and accounts for -- option
 	  designation.
 
-2007-07-19 Jason Fleischli <jason.fleischli@hp.com>
+2007-07-19 Jason Fleischli <fleischli@users.sourceforge.net>
 	* Integrated x86_64 support patches from Chandramouli Narayanan
 	  <mouli@linux.intel.com> changes summarized in following bullets.
 	* alloc.c -- adds patch contributors credit to copyright

Make.defaults

@@ -61,14 +61,17 @@ EFICRT0	   = /usr/lib
 
 CDIR    := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
 TOPDIR  =
+ALLSUBDIRS = ia32 ia64 x86_64 fs choosers devschemes tools
 
-ARCH	   = $(shell uname -m | sed s,i[3456789]86,ia32,)
+HOSTARCH   = $(shell dpkg-architecture -qDEB_BUILD_ARCH | sed s,i[3456789]86,ia32, | sed s,amd64,x86_64, )
+ARCH	   := $(shell dpkg-architecture -qDEB_BUILD_ARCH | sed s,i[3456789]86,ia32, | sed s,amd64,x86_64, )
 INCDIR	   = -I. -I$(TOPDIR) -I$(EFIINC) -I$(EFIINC)/$(ARCH) -I$(EFIINC)/protocol -I$(TOPDIR)/efi110
 CPPFLAGS   = -DCONFIG_$(ARCH) 
 
 OPTIMFLAGS = -O2 
 DEBUGFLAGS = -Wall
-CFLAGS     = $(OPTIMFLAGS) -fno-stack-protector -fno-strict-aliasing -fpic -fshort-wchar $(DEBUGFLAGS)
+CFLAGS     = $(ARCH3264) $(OPTIMFLAGS) -fno-stack-protector -fno-strict-aliasing -fpic -fshort-wchar $(DEBUGFLAGS)
+ASFLAGS    = $(ARCH3264)
 LDFLAGS	   = -nostdlib -znocombreloc
 INSTALL	   = install
 
@@ -108,10 +111,30 @@ OBJCOPY	        = $(prefix)objcopy
 
 # Use Modified binutils that supports x86_64 using UEFI ABI
 ifeq ($(ARCH), x86_64)
+  ifeq ($(HOSTARCH), ia32)
+	ARCH3264 = -m64
+	LD3264 = -melf_x86_64
+
+	GNUEFILIB := $(GNUEFILIB)64
+	EFILIB    := $(EFILIB)64
+	EFICRT0   := $(EFICRT0)64
+  endif
+
         CFLAGS   += -DEFI_FUNCTION_WRAPPER
 	OBJCOPY	  = /usr/bin/objcopy
 endif
 
+ifeq ($(ARCH), ia32)
+  ifeq ($(HOSTARCH), x86_64)
+	ARCH3264 = -m32
+	LD3264 = -melf_i386
+
+	GNUEFILIB := /usr/lib32
+	EFILIB    := /usr/lib32
+	EFICRT0   := /usr/lib32
+  endif
+endif
+
 ifeq ($(ARCH),ia64)
  GCC_VERSION=$(shell $(CROSS_COMPILE)$(CC) -v 2>&1 | fgrep 'gcc version' | cut -f3 -d' ' | cut -f1 -d'.')
 

Makefile

@@ -25,15 +25,19 @@
 # to use this program.
 #
 
-include Make.defaults
+SRCDIR = .
-TOPDIR=.
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/Make.defaults
+TOPDIR = $(SRCDIR)
 
 
 CRTOBJS       = $(EFICRT0)/crt0-efi-$(ARCH).o
 LDSCRIPT      = $(EFICRT0)/elf_$(ARCH)_efi.lds
 
 LDFLAGS	     += -T $(LDSCRIPT) -shared -Bsymbolic -L$(EFILIB) -L$(GNUEFILIB) $(CRTOBJS)
-LOADLIBES     = -lefi -lgnuefi $(shell $(CC) -print-libgcc-file-name)
+LOADLIBES     = -lefi -lgnuefi $(shell $(CC) $(ARCH3264) -print-libgcc-file-name)
 FORMAT        = efi-app-$(ARCH)
 
 FILESYSTEM    =
@@ -87,12 +91,13 @@ fileops.o : Make.defaults
 chooser.o : Make.defaults
 
 $(SUBDIRS): dummy
-	$(MAKE) -C $@
+	mkdir -p $@
+	$(MAKE) -C $@ -f $(SRCDIR)/../$@/Makefile SRCDIR=$(SRCDIR)/../$@ ARCH=$(ARCH)
 
 dummy:
 
 clean:
-	@set -e ; for d in $(SUBDIRS) ; do $(MAKE) -C $$d $@ ; done
+	@set -e ; for d in $(ALLSUBDIRS) ; do $(MAKE) -C $$d $@ ; done
 	rm -f $(TARGETS) *~ *.so $(FILES)
 
 .PRECIOUS: elilo.so
@@ -106,4 +111,4 @@ ifeq ($(GCC_VERSION),2)
 	@exit 1
 endif
 
-include Make.rules
+include $(SRCDIR)/Make.rules

bootparams.c

@@ -67,9 +67,6 @@ create_boot_params(CHAR16 *args, memdesc_t *initrd, memdesc_t *vmcode, UINTN *co
 
 	/*
 	 * Allocate memory for boot parameters.
-	 * This CANNOT be EfiLoaderData or EfiLoaderCode as the kernel
-	 * frees this region when initializing.
-	 * FIXME:  Is this a bug?  (since the memory type *is* EfiLoaderData)
 	 */
 
 	bp = (boot_params_t *)alloc(BOOT_PARAM_MEMSIZE, EfiLoaderData);

choosers/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=
 
@@ -47,7 +52,8 @@ $(TARGET): $(TOPDIR)/Make.defaults $(FILES)
 		echo "You need to define at least one chooser in Make.defaults"; \
 		exit 1; \
 	fi
-	$(LD) -o $@ -r $(FILES)
+	$(LD) $(LD3264) -o $@ -r $(FILES)
+
 
 clean:
 	$(RM) -f $(TARGET) $(FILES)

devschemes/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=simple.o
 
@@ -40,7 +45,7 @@ all: $(TARGET)
 #      without doing make clean.
 #
 $(TARGET): $(FILES)
-	$(LD) -r -o $@ $(FILES)
+	$(LD) $(LD3264) -r -o $@ $(FILES)
 
 clean:
 	$(RM) -f $(TARGET) $(FILES)

docs/README.txt

@@ -0,0 +1,522 @@
+	--------------------------------------------------------------------
+	ELILO.EFI: Linux boot loader for
+			EFI/IA-64,EFI/IA-32 and EFI/x86_64 based systems
+	--------------------------------------------------------------------
+	               Stephane Eranian <eranian@hpl.hp.com>
+
+		                 August 2003
+
+	           Copyright (C) 2000-2012 Hewlett-Packard Co.
+	           Copyright (C) 2006-2010 Intel Co.
+
+
+I/ Introduction
+   ------------
+
+This document describes how to use ELILO on for IA-64, IA-32 and x86_64 EFI-based platforms.
+This document describes ELILO version 3.7 - 3.14. 
+
+II/ Command line options
+    --------------------
+
+	elilo [-hDpPVvaE] [-d nsec] [-C config] [-i initrd] [-c chooser] [kernel [kernel options...]]
+
+	-h	Display a list of all possible command line options.
+
+	-V	Print the version number and exit.
+
+	-d nsec Specify the number of 10th of seconds before loading the
+		kernel.
+
+	-C file Specify the config file to use. The default is elilo.conf in the directory
+		that elilo.efi was loaded from.
+
+	-P	Verify config file syntax only. this option causes ELILO to 
+		parse the config file and generate a report on the console.
+		No kernel is loaded.
+
+	-v	Turn on verbose mode. ELILO prints more message about what it 
+		is doing. For each occurrence of this option the verbosity level
+		is increased by one. The maximum level is 5.
+
+	-a	Always check for alternate kernel image. The default behavior
+		of ELILO is to NOT look for an alternate image. This 
+		option overrides this behavior and ELILO is checking for 
+		alternate images no matter what. Alternate images are
+		specified using the EliloAlt EFI variable.
+
+	-p      force interactive prompt mode. Valid when no kernel image is 
+		specified on the command line.
+
+	-D	print debug output.
+
+	-E	don't force EDD30 variable to TRUE when FALSE.
+
+	-i file Use file as the initial ramdisk (initrd).
+
+	-c name	Specify which kernel chooser to use.  Default is 'simple', and
+		the only other choice at present is 'textmenu'.
+
+	In addition, elilo supports platform specific options:
+
+	For IA-64:
+	----------
+		-r	the kernel image can be relocated if initial load address is not
+			available. This options requires a special version of the kernel.
+
+		-F file will try to load the FPSWA driver indicated by 'file'. Only this file
+		        will be attempted. When no specific file is given, elilo will try
+			loading \efi\intel firmware\fpswa.efi from all accessible EFI system
+			partitions.
+	For IA-32:
+	----------
+		no option defined.
+
+	All file names (including the kernel file) can include a device name using the 
+	following syntax:
+
+		dev_name:/path/to/my/kernel
+
+	The 'dev_name' component depends on the naming scheme selected and the detected
+	devices for your system.  Some choosers may print the information automatically
+	or on demand, see chooser specific documentation for more on this. See README.devschemes 
+	for more information on device naming schemes. The slash character '/' can be used as 
+	a directory separator on any file systems including the EFI file system (FAT32).
+
+	For x86_64:
+	----------
+		none
+
+III/ Configuration File
+     ------------------
+
+     ELILO supports a config file with options similar to the LILO/x86 boot loader.
+
+     Elilo will use the following sequence (shown in order) when looking for its config 
+     file when none is specified on the command line:
+
+	1/ AABBCCDD.conf (netbooting with regular DHCP)
+	   where AABBCCDD is the hexadecimal representation
+	   of the IP address assigned during the DHCP phase.
+
+	2/ elilo-ia64.conf or elilo-ia32.conf or elilo-x86_64.conf
+	   The choice depends on the client platform. This step allows
+	   the same DHCP/PXE server to provide files for both types of clients.
+
+	3/ elilo.conf
+
+     Unless explicitly specified on the command line, elilo looks for its config file
+     in the filesystem and directory it was loaded from. For instance, if elilo.efi
+     is invoked as:
+
+     fs0:\> \efi\debian\elilo.efi
+
+     Then elilo will look for its configuration file in fs0:\efi\debian and not
+     in the root directory of fs0:. The prefix fs0:\efi\debian will be used for
+     all other files that elilo needs to download when their paths are specified 
+     as being relative.
+
+     IMPORTANT:
+     This rule also applies when a specific config file is passed via the -C 
+     option. For example:
+
+     fs0:\> \efi\debian\elilo.efi -C elilo.conf
+
+     This will look for elilo.conf in fs0:\efi\debian and not in fs0:\.
+     To get to the elilo.conf in fs0:\, you need to specify the absolute
+     path:
+
+     fs0:\> \efi\debian\elilo.efi -C \elilo.conf
+
+
+     The configuration file is an ASCII file and not a UNICODE file.
+
+     The config file contains additional options to change the behavior of the loader. 
+     If the same option is specified in the config file AND on the command line, the
+     latter takes precedence. Not all options available in the config file have an 
+     equivalent on command line.
+
+     When elilo is invoked with the -h option, it prints the list of support command line
+     options but also the list of config file options. For each option it also prints
+     the type of data expected.
+
+     The config file options are divided in 2 groups:
+
+
+	- image options which are specific to a particular kernel image. Each kernel image
+   	  must be identified with a logical name called a label. 
+
+     	- global options which affect the behavior of ELILO and apply to all images.
+
+     The ELILO config file follows the LILO/x86 syntax. First come the global
+     options, then the list of images and options for each of them, if
+     necessary. At least one image MUST be defined and it is possible to have
+     an empty list of global options.
+
+     Options have types. Three types are defined:
+     	- boolean: set or not set
+	- string : a string of characters which can be quoted if necessary
+	- number (in decimal) 
+	- filename: a string interpreted as a file name
+
+    
+    The config file supports the following options:
+
+    Global Options:
+    ---------------
+    default=value	Name the default image to boot. If not defined ELILO
+    		 	will boot the first defined image.
+
+    timeout=number	The number of 10th of seconds to wait while in
+    			interactive mode before auto booting default kernel.
+			Default is infinity.
+
+    delay=number	The number of 10th of seconds to wait before
+    			auto booting when not in interactive mode. 
+			Default is 0.
+   
+    prompt		Force interactive mode
+
+    verbose=number	Set level of verbosity [0-5]. Default 0 (no verbose)
+
+    root=filename	Set global root filesystem for Linux/ia64
+
+    read-only		Force root filesystem to be mounted read-only
+
+    append=string	Append a string of options to kernel command line
+
+    initrd=filename	Name of initrd file
+
+    image=filename	Define a new image
+
+    chooser=name	Specify kernel chooser to use: 'simple' or 'textmenu'.
+
+    message=filename	a message that is printed on the main screen if supported by 
+    			the chooser.
+
+    fX=filename		Some choosers may take advantage of this option to
+    			display the content of a file when a certain function
+			key X is pressed. X can vary from 1-12 to cover 
+			function keys F1 to F12.
+
+    noedd30		do not force the EDD30 EFI variable to TRUE when FALSE. In other
+    			words, don't force the EDD30 mode if not set.
+
+    Image options:
+    --------------
+    root=filename	Set root filesystem for kernel
+
+    read-only		Force root filesystem to be mounted read-only
+
+    append=string	Append a string of options to kernel command line
+
+    initrd=filename	Name of initrd file
+
+    label=string	Logical name of image (used in interactive mode)
+
+    description=string	One line text description of the image.
+
+    IA-64 specific options:
+    -----------------------
+
+    Global options:
+    ---------------
+    fpswa=file          Specify the filename for a specific FPSWA to load. 
+			If this option is used then no other file will be tried.
+
+    relocatable		In case of memory allocation error at initial load point of
+    			kernel, allow attempt to relocate (assume kernels is relocatable)
+
+    Image options:
+    --------------
+    relocatable		In case of memory allocation error at initial load point of
+    			kernel, allow attempt to relocate (assume this kernel is relocatable)
+
+    IA-32 specific options:
+    -----------------------
+    legacy-free		Indicate that the host machine does not have a legacy BIOS at all.
+
+
+    The user can specify a kernel and related kernel options using the image label. Alternatively,
+    the user can also specify a kernel file that is not specified in the config file. In any case,
+    some of the global options (such as append) are always concatenated to whatever the user type.
+
+    x86_64 specific options:
+    -----------------------
+    text-mode		elilo>=3.14 boolean, image config option to force text console mode.
+
+IV/ Booting from the local system
+    -----------------------------
+
+    The elilo.efi binary must be in an EFI system partition (FAT32). The config
+    file, kernel image, and optional initrd ramdisk can be on the same partition
+    or even another EFI partition. In the following discussion we assume that all 
+    files are on the same EFI partition which is recognized by the EFI shell (nshell) 
+    as fs0. The kernel and initrd can be copied from the any linux filesystems to the 
+    EFI partition using either the mtools (mcopy) or by mounting the EFI partition as 
+    a vfat partition. However you do not really need this because most linux 
+    distributions install both files in the EFI partition and mount this partition in /boot/efi.
+
+    To boot a kernel, simply power cycle the machine. Once you get to the EFI
+    shell prompt, change to the filesystem that maps to the partition where elilo is.
+
+	Shell> fs0:
+	fs0:\>
+
+	You might need to make sure that the Shell Path is set such that it will load
+	ELILO from fs0:. You can verify this by typing:
+	fs0:\> set
+   	path : fs0:\
+	
+	At this point you can invoke ELILO:
+
+	fs0:\> elilo
+
+	If there is no config file, then it will: 
+		- pick up the kernel image named vmlinux if it exists, otherwise it will abort.
+		- pass no argument to the kernel.
+	
+	You can specify the kernel image and its options on the command line.
+	For instance you can do:
+
+	fs0:\> elilo vmlinux root=/dev/sda5
+
+	You can specify as many parameters as you want. The syntax follows the kernel
+	rule, i.e., list of value pairs (or even single values) separated by space.
+	A more complicated example would be:
+
+	fs0:\> elilo -i initrd-2.4.9 vmlinuz-2.4.9 root=/dev/sda2 console=tty0 console="ttyS0,115200n8"
+
+	In this example, notice the double quotes. They are required because the comma is a control
+	character for nshell.
+
+    In the case a config file is found, then elilo will behave according to
+    the options in that file. However if elilo is invoked with command line options, they
+    will be combined or they will override (if conflicting) what is defined in the config file.
+
+    As of version 3.3, elilo is fully compliant with the EFI specification (1.10) with regards
+    to where the bootloader (elilo.efi) must be located in the EFI system partition. In 
+    section 11.2.1.3 of the EFI1.10 specification, it is said that in order to avoid conflicts
+    between various loaders for various OSes or distributions of the same OS, every vendor MUST
+    use a dedicated directory: \EFI\vendor\. The bootloader must be placed in this directory.
+    This has always been possible as this is a matter of creating the directory and copying
+    the elilo.efi file in it. However up until version 3.3, elilo would look for its config file
+    and kernel/initrd in the root (/) of the partition it was loaded from. As of version 3.3,
+    elilo will now ONLY look for its configuration file FROM THE DIRECTORY IT WAS LOADED FROM. 
+    The same applies to the kernel and initrd files unless absolute paths are specified. Let us 
+    look at a simple example:
+
+    	- suppose elilo.efi is in \EFI\DIST if fs0:  (for the EFI Shell)
+
+	- if you invoke elilo as follows:
+
+		fs0:\> \efi\dist\elilo -v -p
+		default file path: \efi\dist\
+		config file      : \efi\dist\elilo.conf
+		ELILO boot: 
+
+
+	  Note that this is the same if you invoke elilo directly from \efi or \efi\dist.
+ 
+    File references in the configuration file are treated as relative to the directory
+    elilo was loaded from except if they use an absolute path. 
+
+   As of version 3.4 a similar rule applies to the network boot sequence, see netbooting.txt
+   for details.
+
+V/ Interactive mode
+   ----------------
+
+   Elilo can be forced into interactive mode using the "prompt" option in the config
+   file or with the -p option. In this mode, the user can select a kernel to load.
+
+   The interface depends on the chooser, it may be a simple command line prompt as provided
+   by the simple chooser or a more sophisticated screen with scroll menus as provided by
+   textmenu. Most choosers depends on the elilo config file to get the information they
+   display. The simple chooser can operated without the elilo config file. However it
+   is always better to have this file, to create handy logical names for each possible
+   boot choices. The logical names are specified with the "label" option in the config
+   file. They represent a specific kernel "image" and its specific options.
+
+   In elilo, the user can select a particular kernel image using the corresponding label
+   name. A simple example is as follows:
+
+      If we suppose that the following is defined in elilo.conf:
+
+      	image=vmlinuz-2.4.9
+	label=linux-up
+	initrd=initrd-2.4.9
+	root=/dev/sda2
+	append="console=tty0 console=ttyS0,115200n8"
+
+      then the user can specify linux-up at the prompt and elilo will load the 
+      vmlinuz-2.4.9 kernel file and the initrd-2.4.9 ramdisk and will pass 
+
+         "root=/dev/sda2 console=tty0 console=ttyS0,115200n8"
+
+      as command line arguments to the kernel.
+
+      This behavior is identical to Lilo/x86. However, elilo further allows the user
+      to specify actual kernel files names as well, i.e., kernels that are not defined
+      in the configuration file. If we reuse the above example and the simple chooser, 
+      the user can type:
+
+      ELILO boot: vmlinux-2.4.18 root=/dev/sda2
+
+      and elilo will boot the vmlinuz-2.4.18 kernel if it exists.
+
+VI/ The alternate kernel image
+    --------------------------
+
+    Oftentimes when debugging kernels you want to reboot the machine once with
+    your test kernel and, if something goes wrong, you want to fall back to a more
+    stable kernel. In addition you want to be able to do this from a remote machine. 
+    Many things can go wrong when doing kernel debugging. It could be that you don't
+    even reach user-mode. In this case however, you still want to fall back to
+    a stable kernel. The feature you'd like from a boot loader is 'boot once and
+    then fall back to safe kernel'.
+
+    Elilo offers this feature and it's called 'alternate kernel image'.  
+    You can configure elilo to load a kernel only once and then whatever 
+    happens the next reboot falls back to a different kernel hopefully more stable.
+
+    To do this, elilo relies on an EFI variable called 'EliloAlt' with a NULL GUID.
+    The content of this variable is a UNICODE string containing the kernel file name
+    and its command line options.
+
+    When the -a option is specified on the command line or if the "checkalt" option
+    is present in the config file, elilo will check for the presence of this variable.
+    If found and the content is a valid UNICODE string, elilo will use it as the kernel
+    to boot. There is no verification made on the validity of the kernel name or options.
+    Then the variable is deleted. If the variable is rejected because it does not look
+    sane, it is also deleted.
+
+    The variable can be set from a running Linux system using the /proc/efi/vars
+    interface. In the tools directory of this package, there is a Linux tool called
+    elilovar which can be used to create, modify, print, and delete the EliloAlt
+    variable. Refer to eliloalt.txt for more information on this tool.
+
+VII/ Auto booting the machine
+     -----------------------
+
+    Once you're satisfied with your machine setup, it is good to install an 
+    auto boot procedure.  You have two options to do this:
+    	- from the EFI boot manager menu
+	- from the EFI shell
+
+    The first option is preferred and is used by most Linux distributions.
+    Elilo can be invoked directly from the boot manager. You need to get into
+    the 'boot maintenance' menu and use load file a file. This can be tedious
+    so instead it is recommended that you use a Linux tool called efibootmgr
+    which is also shipped in most distributions. With this tool, you can
+    create your own boot option and change the boot order.
+
+    
+    
+    The second approach use the EFI shell and a shell script with a special name: 'startup.nsh'.
+
+    When the system boots, it looks for EFI partitions and if it finds
+    a 'startup.nsh' file in ANY of these it will jumpstart execution from it.
+
+    So the typical way of auto booting your Linux/ia64 system is to simply create
+    such a file with the following content:
+
+	# cat /boot/startup.nsh
+	elilo vmlinuz root=/dev/sda2
+
+    Of course, this can be simplified if there is a configuration file.
+
+
+VII/ Netbooting 
+     ----------
+
+     Please refer to netbooting.txt for a complete description of how to boot
+     from the network.
+
+
+XII/ Booting on EFI/ia32 platforms
+     -----------------------------
+
+	Until PC comes with the EFI firmware built in, you need to boot from a
+	floppy that has the EFI firmware on it. Such floppy can be
+	constructed from the EFI sample implementation and toolkit that is
+	available from the Intel Developer Web site at:
+
+		http://developer.intel.com/technology/efi/
+
+	To use elilo on IA-32, you can put it on a floppy and
+	on a FAT32 partition (msdos partition). You can also
+	netbooting if you network adapter has support for UNDI/PXE.
+
+	Elilo/ia32 is capable of booting unmodified 2.2.x. and 2.4.x kernels
+	as they are shipped by distributors today (such as Redhat7.2). You don't need 
+	to recompile the kernel with special options. Elilo ONLY takes compressed kernel
+	image which are typically obtained via a 'make bzImage'. Plain elf/32 kernel can't 
+	be booted (plain vmlinux will not work). Similarly, existing initial ramdisks can 
+	be used without modifications. 
+
+XIII/ Booting on EFI/x86_64 platforms
+     -----------------------------
+
+	To use elilo on x86_64, you can put it on a floppy and
+	on a FAT32 partition (msdos partition). You can also
+	netboot if your network adapter has support for UNDI/PXE.
+
+	Elilo/x86_64 requires efi64 enabled linux kernel (> 2.6.21).
+	You need to compile the kernel with CONFIG_EFI option.
+	x86_64 platforms with UEFI 2.0 firmware deprecate UGA protocol
+	and therefore only the Graphics Output Protocol (GOP) is supported. For
+	such platforms, the kernel must be configured with EFI_FB option. This
+	will enable early boot messages on the console. The elilo for x86_64
+	attempts to query the firmware for GOP and if it fails it defaults to
+	text mode. Elilo ONLY takes compressed kernel image which are
+	typically obtained via a 'make bzImage'. Plain elf/x86_64 kernel can't 
+	be booted (plain vmlinux will not work). Similarly, existing initial
+	ramdisks can be used without modifications. 
+
+	The x86_64 implementation converts the EFI memory map into E820 map and
+	passes it in the bootparameter supplied to the OS. For details on
+	bootparameter, see x86_64/sysdeps.h.
+
+IX/ Credits
+    -------
+
+	Contributors:
+	Intel Corp.
+	Stephane Eranian <eranian@hpl.hp.com>
+	David Mosberger  <davidm@hpl.hp.com>
+	Johannes Erdfelt <jerdfelt@valinux.com>
+	Richard Hirst    <rhirst@linuxcare.com>
+	Chris Ahna	 <christopher.j.ahna@intel.com>
+	Mike Johnston	 <michael.johnston@intel.com>
+	Fenghua Yu	 <fenghua.yu@intel.com>
+	Bibo Mao	 <bibo.mao@intel.com>
+	Brett Johnson	 <brett@hp.com>
+	Jason Fleischli	 <Jason.Fleischli@hp.com>
+	Chandramouli Narayanan <mouli@linux.intel.com>
+	
+	Maintainers:
+	Jason Fleischli	 <Jason.Fleischli@hp.com>
+
+X/ Bug reports
+   -----------
+
+	Use the sourceforge bug submission system on the elilo sourceforge
+	project page for reporting including errors or descrepancies in this
+	document.
+
+XIII/ Reference
+      ---------
+
+	UEFI 2.0 specifications are available from the following web site:
+
+		http://www.uefi.org/home
+
+	EFI v1.02 specifications are available from the following web site:
+
+	http://developer.intel.com/technology/efi/
+
+	The latest sources of ELILO can be downloaded at:
+
+	https://sourceforge.net/projects/elilo/files/
+

docs/elilo.txt

@@ -6,7 +6,7 @@
 
 		                 August 2003
 
-	           Copyright (C) 2000-2003 Hewlett-Packard Co.
+	           Copyright (C) 2000-2012 Hewlett-Packard Co.
 	           Copyright (C) 2006-2010 Intel Co.
 
 
@@ -14,7 +14,7 @@ I/ Introduction
    ------------
 
 This document describes how to use ELILO on for IA-64, IA-32 and x86_64 EFI-based platforms.
-This document describes ELILO version 3.7. 
+This document describes ELILO version 3.7 - 3.14. 
 
 II/ Command line options
     --------------------
@@ -85,7 +85,7 @@ II/ Command line options
 
 	For x86_64:
 	----------
-	No new options.
+		none
 
 III/ Configuration File
      ------------------
@@ -243,7 +243,7 @@ III/ Configuration File
 
     x86_64 specific options:
     -----------------------
-	None yet.
+    text-mode		elilo>=3.14 boolean, image config option to force text console mode.
 
 IV/ Booting from the local system
     -----------------------------
@@ -481,6 +481,7 @@ XIII/ Booting on EFI/x86_64 platforms
 IX/ Credits
     -------
 
+	Contributors:
 	Intel Corp.
 	Stephane Eranian <eranian@hpl.hp.com>
 	David Mosberger  <davidm@hpl.hp.com>
@@ -490,14 +491,19 @@ IX/ Credits
 	Mike Johnston	 <michael.johnston@intel.com>
 	Fenghua Yu	 <fenghua.yu@intel.com>
 	Bibo Mao	 <bibo.mao@intel.com>
+	Brett Johnson	 <brett@hp.com>
+	Jason Fleischli	 <Jason.Fleischli@hp.com>
 	Chandramouli Narayanan <mouli@linux.intel.com>
 	
+	Maintainers:
+	Jason Fleischli	 <Jason.Fleischli@hp.com>
+
 X/ Bug reports
    -----------
 
-   	You can submit bugs to <eranian@hpl.hp.com> or to the Linux/ia64
+	Use the sourceforge bug submission system on the elilo sourceforge
-	mailing list at linux-ia64@linuxia64.org. Visit http://www.linuxia64.org
+	project page for reporting including errors or descrepancies in this
-	to subscribe to this list.
+	document.
 
 XIII/ Reference
       ---------
@@ -512,5 +518,5 @@ XIII/ Reference
 
 	The latest sources of ELILO can be downloaded at:
 
-		ftp://ftp.hpl.hp.com/pub/linux-ia64
+	https://sourceforge.net/projects/elilo/files/
 

elilo.c

@@ -46,7 +46,7 @@
 #include "loader.h"
 #include "config.h" /* for config_init() */
 
-#define ELILO_SHARED_CMDLINE_OPTS	L"pPMC:aDhd:i:vVc:E"
+#define ELILO_SHARED_CMDLINE_OPTS	L"pPMC:aDhd:i:m:vVc:E"
 
 elilo_config_t elilo_opt;
 
@@ -483,6 +483,11 @@ efi_main (EFI_HANDLE image, EFI_SYSTEM_TABLE *system_tab)
 	 */
 	uefi_call_wrapper(BS->SetWatchdogTimer, 4, 0, 0x0, 0, NULL);
 
+	/*
+	 * start a clean console
+	 */
+	uefi_call_wrapper(systab->ConOut->Reset, 2, systab->ConOut, FALSE);
+
 	/* initialize memory allocator */
 	if (alloc_init() == -1) return EFI_LOAD_ERROR;
 

elilo.h

@@ -29,7 +29,7 @@
 #ifndef __ELILO_H__
 #define __ELILO_H__
 
-#define ELILO_VERSION L"3.14"
+#define ELILO_VERSION L"3.16"
 
 #include <efi.h>
 

fs/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=
 ifeq ($(CONFIG_localfs),y)
@@ -59,7 +64,7 @@ $(TARGET): $(TOPDIR)/Make.defaults $(FILES)
 		echo "You need to define at least one filesystem in Make.defaults"; \
 		exit 1; \
 	fi
-	$(LD) -r -o $@ $(FILES)
+	$(LD) $(LD3264) -r -o $@ $(FILES)
 
 clean:
 	$(RM) -f $(TARGET) $(FILES)

ia32/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=system.o config.o bzimage.o plain_loader.o gzip_loader.o gzip.o
 
@@ -37,13 +42,13 @@ all: $(TARGET)
 system.o: rmswitch.h
 
 rmswitch.h: bin_to_h.c rmswitch.S
-	$(CC) -o bin_to_h bin_to_h.c
+	$(CC) -o bin_to_h $(SRCDIR)/bin_to_h.c
-	$(AS) -o rmswitch.o rmswitch.S
+	$(AS) -o rmswitch.o $(SRCDIR)/rmswitch.S
 	$(LD) -Ttext 0x0 -s --oformat binary -o rmswitch rmswitch.o
 	./bin_to_h <rmswitch >rmswitch.h
 
 $(TARGET): $(FILES)
-	$(LD) -r -o $@ $(FILES)
+	$(LD) $(LD3264) -r -o $@ $(FILES)
 
 clean:
 	$(RM) -f $(TARGET) $(FILES)

ia32/system.c

@@ -207,19 +207,8 @@ static INTN get_video_info(boot_params_t * bp) {
 			(VOID **)Gop_handle);
 
 	if (EFI_ERROR(efi_status) && efi_status != EFI_BUFFER_TOO_SMALL) {
-                Print(L"LocateHandle GopProtocol failed.\n");
+                Print(L"EFI returned no GoP handle, No Graphics Output Device?\n");
-                Print(L"--Either no graphics head is installed,\n" \ 
+                Print(L"--Elilo will try to default to console text mode.\n");
-                       "--efi console is set to serial, or,\n" \
-                       "--the EFI firmware version of this machine is\n" \
-                       "--older than UEFI 2.0. and does not support GOP");
-                Print(L"you can SAFELY IGNORE this error. elilo will\n" \
-                       "default to text-mode.\n Alternatively you can " \
-                       "now force text mode by setting config variable\n" \
-                       "text_mode=1 for x86 in elilo.conf or via cmdline.\n\n");
-                Print(L"However if this is the last text output you see\n" \
-                       "ensure that your kernel console command line\n " \
-                       "variable matches up with the actual efi boot menu\n" \
-                       "console output settings. for example efi console\n\n");
 		return -1;
 	}
 	Gop_handle = alloc(size, 0);
@@ -488,9 +477,6 @@ sysdeps_create_boot_params(
 	 */
 	if (param_start != NULL) {
 		CopyMem(bp, param_start, 0x2000);
-		free(param_start);
-		param_start = NULL;
-		param_size = 0;
 	}
 	/*
 	 * Save off our header revision information.

ia64/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=system.o config.o fpswa.o plain_loader.o gzip_loader.o \
       gzip.o memset.o memcpy.o setjmp.o longjmp.o

release.notes

@@ -1,44 +1,47 @@
-3 . 1 4   R E L E A S E   N O T E S 
+3 . 1 6   R E L E A S E   N O T E S 
 ===================================
 
 QUICK CHANGE SUMMARY
 ====================
-* Fixes for newly emerging x86_64 UEFI-2 boxes where long standing old
+ * Adds native x86x crossbuild functionality
-  assumptions are borked.
+   build 32bit or 64bit versions from either environment via
-* Uptake of SUSE and community patches
+   make ARCH=ia32|x86_64 (the ARCH IS case sensitive).
-	- add sysfs support for efi vars (formerly /proc/efi/vars)
+   make by itself will default to the native host arch.
-	- fix strncpy overflow
+ * Add console reset call during initialization. thanks A. Steinmetz
-	- fix bzimage alloc
+ * simplify output of no GOP warning text so it no longer looks like an error.
-	- cleanups
+ * MAJOR: Fixed Fault crash when EFI memory map changes from under elilo.
-	- support longer command line
+   (from an outside interrupt in this case). When the EFI Memory map 
-	- yet some more mac fixes
+   changes after elilo has already built boot params to pass to the 
-	- align elilo with latest kernel boot protocol format.
+   kernel the EFI call to ExitBootSvcs just prior to boot will fail 
-	- new memory management strategy for initrd and kernel image loading.
+   because elilo has the old map key. This is valid EFI behavior, elilo
-* add text-mode command line option, force text-mode (bypass graphics probes).
+   retries to pick up the new memory map and key but had already freed 
-* replace error output on GOP handle failed, downgraded to normal
+   the start params portion of boot params resulting in a NULL DEREF
-  print status with more informative output.
+   crash reset once it hands the now bogus boot params to the kernel on
-* Fix ia32 build issue with new gcc due to stack protector enforcement.
+   the 2nd successful call to exit efi and boot. 
+	Thanks to Jerry Hoemann @ HP for reporting this bug.
+ * minor bugfix, fixed -m option broken. thanks Allan-lsk.
    
 BUILD NOTES
 ====================
  You will need the following toolchain to build elilo-3.14 from source
  the elilo build environment is optimized for Debian and Debian based distros.
- elilo-3.14 was built in the Debian Lenny (Ubuntu 10.04) build environment.
+ elilo-3.16 was built in the squeeze+(ubuntu 11.x) build environments except
+ for itanium which is unchanged to best support legacy enterprise configs.
  Toolchain versions for this release were:
-	x86x(32 &64)
+	x86x(32 & 64bit versions)
-	* gnu-efi --> 3.0i-2ubuntu1
+	* gnu-efi --> 3.0i-3
-	* gcc ------> 4.4.3-1ubuntu1
+	* gcc ------> 4:4.4.4-1ubuntu2
-	* binutils -> 2.20.1-3ubuntu7
+	* binutils -> 2.20.51.20100908-0ubuntu2
 	ia64
 	* gnu-efi --> 3.0e-2
 	* gcc ------> 4.3.2-2
 	* binutils -> 2.18.1~cvs20080103-7
 
- * if you use a debian based (lenny)build environment you will have no problems
+ * if you use a debian based build environment you will have no problems
  and setting it up is simple. you will be able to build elilo in 3 steps:
  1. apt-get install gnu-efi, gcc, binutils
- 2. apt-get source elilo (or download elilo-3.14.tar.gz from SourceForge.)
+ 2. apt-get source elilo (or download elilo-3.16 source from SourceForge.)
- 3. extract source tarball and cd ./elilo-3.14 and type $> make
+ 3. extract source tarball and cd to ./$your-elilo-source and type $> make
 
 
  ** If you use the upstream toolchain tarballs(i.e. pre distro) you will need 
@@ -113,3 +116,4 @@ Additionally from ...kernel-source/Documentation/Boot.txt...
           description="Ubuntu 2.6.32-27-generic kernel"
           initrd=/initrd.img-2.6.32-27-generic
 
+

tools/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=eliloalt.o
 TARGET=eliloalt

x86_64/Makefile

@@ -23,10 +23,15 @@
 # to use this program.
 #
 
-include ../Make.defaults
+SRCDIR = .
-include ../Make.rules
+
+VPATH = $(SRCDIR)
+
+include $(SRCDIR)/../Make.defaults
+include $(SRCDIR)/../Make.rules
+
+TOPDIR=$(SRCDIR)/..
 
-TOPDIR=$(CDIR)/..
 
 FILES=system.o config.o bzimage.o plain_loader.o gzip_loader.o gzip.o
 #FILES=system.o config.o plain_loader.o
@@ -38,13 +43,13 @@ all: $(TARGET)
 system.o: rmswitch.h
 
 rmswitch.h: bin_to_h.c rmswitch.S
-	$(CC) -o bin_to_h bin_to_h.c
+	$(CC) -o bin_to_h $(SRCDIR)/bin_to_h.c
-	$(AS) -o rmswitch.o rmswitch.S
+	$(AS) -o rmswitch.o $(SRCDIR)/rmswitch.S
 	$(LD) -Ttext 0x0 -s --oformat binary -o rmswitch rmswitch.o
 	./bin_to_h <rmswitch >rmswitch.h
 
 $(TARGET): $(FILES)
-	$(LD) -r -o $@ $(FILES)
+	$(LD) $(LD3264) -r -o $@ $(FILES)
 
 clean:
 	$(RM) -f $(TARGET) $(FILES)

x86_64/system.c

@@ -641,10 +641,8 @@ sysdeps_create_boot_params(
 	 */
 	if (param_start != NULL) {
 		CopyMem(bp, param_start, 0x2000);
-		free(param_start);
-		param_start = NULL;
-		param_size = 0;
 	}
+
 	/*
 	 * Save off our header revision information.
 	 */
@@ -703,10 +701,8 @@ sysdeps_create_boot_params(
 	DBG_PRT((L"initrd->start_addr="PTR_FMT"  initrd->pgcnt=%d\n",
 		initrd->start_addr, initrd->pgcnt));
 
-	/* These RAMdisk flags are not needed, just zero them. NOT!*/
 	/* 'ramdisk_flags' (@0x1F8) is called 'ram_size' in the meantime, */
 	/* see Documentation/x86/boot.txt. */
-
 	if (initrd->start_addr && initrd->pgcnt) {
 		if ( (UINT64)initrd->start_addr > UINT32_MAX ) {
 			ERR_PRT((L"Start of initrd out of reach (>4GB)."));